Search the Community
Showing results for tags 'vehicle'.
Found 427 results
-
Hello! I want ot share my car models. Previously designed trucks and cars 4pin wide, I thought that the truck should be wider than the car - whitch means 5pin, since 6pin - its too much :) 4pin trucks can be seen here p.s. If I made a mistake in the section - please forgive me and move the topic to the ride one. Thank you for the attention! Next trucks ( Which is betten - add new models in the first (main) post or in the following comments? ) My topics: micro city + micro village
-
11th alternative for 76912 set! This time i wanted to remake my most popular alternative on youtube and make it better in terms of stability and looks. This time i present you the 65' Ford Mustang Hoonicorn V2! A lot of work were done to make this model better than the V1. FREE INSTRUCTIONS HERE: https://youtu.be/qulq-O5vxi0 THANKS FOR SUPPORT!
-
Hello Lamborghini and Speed Champions fans, The Lamborghini Aventador LP700-4 is a mid-engine sportscar produced by the Italian automotive manufacturer Lamborghini. In keeping with Lamborghini tradition, the Aventador is named after a Spanish fighting bull that fought in Zaragoza, Aragón, in 1993. The Aventador is the successor for the Murciélago and was made by hand in Sant'Agata Bolognese, Italy. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-149528/_TLG_/lamborghini-aventador-lp700-4 It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a clean model which is as accurate as possible in this small scale. I prefer the brick built solutions to keep the flexibility of the used parts in further builds, and therefore only two types of stickers are used: simple black ones to cover the visible parts of the headlights in the front air intakes, and the Lamborghini logo. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic headlights, the front and side air intakes, the side view mirrors and rear details with the wide exhaust etc... Maybe the most challenging one was the hood tilt and some half stud offsets in the inside structure. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The two trans-clear headlight parts "Slope, Inverted 45 2 x 1" (part 3665) are very rare, it never released in a set, but is available on Bricklink in some webshops. Of course they can be replaced for example by white, black, light bluish gray or dark bluish gray versions. The parts 86996 and 42446 are also rare, but the picture 7 shows an alternate side view mirror solution. It is a very low build, and can roll well only on flat surfaces. It is more of a display model then a toy for small children. The model has space for two minifigures: one with small hair or helmet in the driver's seat and one either without hair or withour leg. Thanks for visiting, _TLG_ Lamborghini Aventador - Instructions 1 by László Torma, on Flickr Lamborghini Aventador - Instructions 2 by László Torma, on Flickr Lamborghini Aventador - Instructions 3 by László Torma, on Flickr Lamborghini Aventador - Instructions 4 by László Torma, on Flickr Lamborghini Aventador - Instructions 5 by László Torma, on Flickr Lamborghini Aventador - Instructions 6 by László Torma, on Flickr Lamborghini Aventador - Instructions 7 by László Torma, on Flickr Lamborghini Aventador - Instructions 8 by László Torma, on Flickr
-
Let´s start with brand new model for the LEGO Technic Challenge. A 29 cm tall figure of American astronaut with moving wrists, elbows and shoulders. The helmet is equipped with two PF lights and both arms are operated by PF M motors. The model is remote controlled and powered by rechargeable LEGO battery.
-
My fourth alternative for new ferrari set! Decided to take some rest from the Ferraris and build a Mclaren F1 on a budget. FREE INSTRUCTIONS: https://reb.li/m/143732
-
Futuron - Retro Space Solar Ship [Futuron] Retro Space Solar Ship by Horlack, on Flickr ================================== The beginning/Genesis : ================================== At the beginning of September, I re-watched the old animated as X-Bomber at 43 years old ! It was my birthday this month. Don't ask me what went through my mind at the time, I don't know at all! I wanted to go back to childhood, because I have the impression of having aged. I had to straighten "the bar", lol ! Seeing these old Retro solar boats literally “blew my mind”. I never realized that a lot of anime from that era had a "strange spaceship" conception, transforming old 14-18th century ships / galleons with engines for space. Yet it was so obvious! And it was there, that suddenly, I remembered Jayce, Cobra, etc ... In short, I saw all the ships of the anime of that time scroll through my head, like a comet in front of my eyes (which booms crashing into my head). And no one had done this in Lego. At least I don't remember. In itself, the beginning of an idea or impression that smelled good, and / or had potential. It was the very beginning of the inspiration and brainstorming in my head for Lego Classic Space ! ================================== The concept : ================================== I did something unusual, non-conformism, eccentric, disconcerting and crazy at the same time. I make a double combination and double ration, animated 70-90 which it was the fashion of space ships and Lego Space Futurons 87-90. For a good Retro nostalgia I combined elements of the Azuris ship from « Message from space : galactic wars », the Cephalus ship from Star Fleet X-Bomber, Glory of the universe of Jayce and the Wheeled Warriors, and the Solaris of the Mysterious cities of Gold ! 2 periods 70-90 in 1! Fashion Geek powa, total ! ================================== Animated Wikipedia source: ================================== https://en.wikipedia.org/wiki/Message_from_Space:_Galactic_Wars https://en.wikipedia.org/wiki/X-Bomber https://en.wikipedia.org/wiki/Jayce_and_the_Wheeled_Warriors https://en.wikipedia.org/wiki/The_Mysterious_Cities_of_Gold ================================== Youtube animated credits for the nostalgic: ================================== Message from space : galactic wars / San Ku Kai https://www.dailymotion.com/video/x3a7kge https://www.youtube.com/watch?v=Jfzb7kndOH8 https://www.youtube.com/watch?v=ev846CoLg1c Star Fleet X-bomber: https://www.youtube.com/watch?v=szZisbEQB_Q Jayce and the wheeled warriors : https://www.youtube.com/watch?v=y9K0SzFIf4A The Mysterious Cities of Gold : https://www.youtube.com/watch?v=enoK-1CW74Y ================================== I took again in inspiration: ================================== - The front and landing feet of Glory of the Universe. - Sails and propulsion reactors of the Cephalus. - The front spur and the hexagonal solar sail at the top of the Solaris mast. - Part of the sails and the structure of the Azuris. ================================== Remarkable elements, NPU, conversion of parts, techniques : ================================== I converted parts #4346 and #4345, in all directions, with levers, for the machinery. Part #44938 bionicle shield, with a "mechanical" aspect converted into an energy capacitor. Various parts of Droids (starwars) converted in the machinery and on the outer deck. Bionicle Shield #45275 converted into deflectors, on the deck of the ship. Kind of like "Viking ship/longship" shields. Big Trident Bionicle #40339 = excellent for large boat emblems in general. I used a slope technique for the sides of the hull. For the rear canopy in the hull, I used a SNOT technique with part #30249. ================================== Physical information : ================================== - 7,082 parts for 854 lots. - 2 weeks of brainstorming, intellectual reflection or "total blank" ...: passive or empty work. - 3 to 4 weeks of active work. - 60.8 studs width, 101.8 studs length, 78.7 studs height. - 48.7 cm width, 81.5 cm length, 63 cm height. - 5.77 Kg. ================================== Global : ================================== All Futuron figures, including the green Lego City minifigure and the lesser known "Educational & Dacta" minifigures. 9 crew members, 3 teams of 3 watch members. ================================== Exterior/outside: ================================== - Solar sails with 3 intermediate lookouts. They can rotate a bit. - Futuron logo, in stickers, on the sails. - 2 radars at the top of the masts. - Long electromagnetic barrel at the front. - 2 small laser cannon turrets at the front. - 2 large turrets at the rear, pulsed radius. - Wings with stabilizers at the end. - 2 small rotating turrets under the wings. - 4 landing feet. - Various elements of machinery on the deck of the Boat. - 8 deflector shields on the sides (Bionicle shield converted). - 2 large propulsion reactors. - Cockpit. ================================== Wheelhouse: ================================== - 1 captain / watch officer seat. - 1 seat Transmission of orders to machines. - 1 navigation control seat. - 1 communication control seat. - 1 alarm control seat. - Walkie-talkies, fans, fire extinguishers, binoculars, cups, etc. ================================== Interior/inside hull of the ship : ================================== - Small storage room at the front, with a ladder to grab onto the deck of the solar ship. - 6 beds with drawers below. - WC / toilet. - Sonic shower. - Kitchen / Cantina: sink, water, oven, cupboards, cups, bottles of food. - Table, bottles of food. - Machine room: control bar, control panel, turbines, fans, transformer, energy condenser, energy pressurizer, cooling circuit, heat transfer fluid, warning lights, ladder to climb to the cockpit, tool kit, tools behind the ladder. - Rear canopy - SAS by energy barrier. ================================== Conclusion: ================================== I built in a perspective of pseudo-realism, pseudo-likely and pseudo-consistency, with compromises with the Retro concept of the animated ones of the years 70-90's. I wanted something playable and fun at the same time. I had a lot of difficulty and trial and error, because I had never done a Lego boat. I worked several times until 4am ! I often work like this: as long as the inspiration is there, I must not lose it, and I work until I no longer see the time passing. But the opposite has also happened to me several times: several times the symptom of the "blank sheet" for 1 to 3 days, without knowing how I was going to build, find inspiration, think about the logic of the construction, etc. . This feeling of "emptiness", that you feel something is happening, and you have it on the tip of your tongue, but it does not come out! Annoying and horrifying sensation ! :) The inclination of the walls gave me intellectual problems. It took a long time to build the engine room. I had to redo it at least 3-4 times. I wanted a maximum of diversity and complexity at the same time. The confined space of the hull gave me difficulties: how to integrate "likely" elements in so little volume ? I have lost my hair several times. Just those damn shower and toilet, I had to spend 3 hours each, to do, undo and redo in all the sauces. Like a little monkey who tests all combinations. Shouldn't bring me a banana at this time, because I think I would have been screwed to make a monkey cry as a bonus .... lol [Futuron] Retro Space Solar Ship by Horlack, on Flickr (Zoom on Flick, picture Full-HD 9216 x 4608 pixels) [Futuron] Retro Space Solar Ship by Horlack, sur Flickr (Zoom on Flick, picture Full-HD 9216 x 6144 pixels) [Futuron] Retro Space Solar Ship by Horlack, sur Flickr (Zoom on Flick, picture Full-HD 9216 x 4608 pixels) Shiptember 2021 [Futuron] Retro Space Solar Ship by Horlack, on Flickr ================================== Source / reference on my project (progression in the time) : ================================== https://forum.brickpirate.net/viewtopic.php?f=31&t=25577 https://www.flickr.com/photos/horlack/albums/72157720062770130 https://www.facebook.com/media/set/?vanity=HorlackBricks&set=a.495422262040159
-
My 23rd alternative for set 76901. This time i used ONLY parts included in set mentioned before to build a famous german sportscar - Porsche 911 GT3. FREE INSTRUCTIONS: https://reb.li/m/140170
-
My latest project for Lego Ideas. A base which combines the Alpha 1 rocket base and the Mobile Rocket Transport in a single set. more images here: https://ideas.lego.com/projects/53ff41d8-f695-436c-bf33-de7ece4201d0 If you like it, please support it.
-
1940s short school bus - real world MOC (for use with Modular Buildings or Winter Village)
Murdoch17 posted a topic in LEGO Town
I remade my magic school bus model into a school bus from an older time period (the 1940's) and I think I like this version better. There are some anachronisms (such as the swinging stop sign arm) that didn't exist on school buses in the '40s, but I am using Modular Building / Winter Village logic here: old fashioned vehicles and buildings, with some modern features strewn about when needed. Like many of my vehicle models the roof does not come off to get at the inside details, but then again, there aren't much in the way of details in there anyway. (Yes, the stop sign is printed wonky. There is nothing I can do about it.) Thoughts? -
I recreated set 40586 (Moving Truck GWP) in blue, and changed the wheels, rear-view mirrors, front bumper, and a few other things. You may be asking why I chose blue for the truck. The answer is simple: I had two blue wheel arches lying around unused, and this neatly solves that! The rear of the truck. The roof comes off and the ramp slides out. Also in this picture you can see the cabin door opens. The roof of the cab section also comes off to seat a driver at the wheel. Thoughts?
-
[MOC] A 'Clean' Off Road Car Chassis
zumaidi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
A clean car chassis with remote and suspension. https://rebrickable.com/mocs/MOC-76908/zumaidi/clean-chassis/#details Car Chassis -
Hi, guys! I know that, there is February yet and we're before March release, but let's start new topic! So, at first I want to say that 2023 wave is amazing. New brand, new mudguards, new windscreens! Whoah! And there are my speculation/cars I want to see in Speed Champions 2024: ~ Porsche 911 GT2 RS Clubsport 25 ~ Porsche Taycan ~ Audi e-tron GT ~ BMW M6 ~ BMW M4 GT3 & BMW M3 1991 ~ Ferrari 499p LMH ~ Ford Focus RS 2021 ~ Honda Civic Type R ~ Cadillac LMDH What do you think about my cars? What cars would you like to see? Show your speculation/wishlist.
-
My 3rd alternative for 76917. This time i used ONLY parts included in set mentioned before to build an older Skyline from the R34 we had originally in the set. FREE INSTRUCTIONS: https://reb.li/m/137877
-
Hello Trabi and Speed Champions fans, Trabant 601 (or Trabant P601 series) is one of the most iconic Eastern Bloc cars of my childhood. It was a Trabant model produced by VEB Sachsenring in Zwickau, Saxony. It was the third generation of the model, built for the longest production time, from 1964 to 1990. As a result, it is the best-known Trabant model and often referred to simply as "the Trabant" or "the Trabi". During this long production run, 2,818,547 Trabant 601s were produced overall and it was the most common vehicle in former East Germany. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-137852/_TLG_/trabant-601 https://www.mocsmarket.com/lego-mocs/trabant-601/ It is a studless build in the original, 6 studs wide Speed Champions scale and fits perfectly to the new City style cars too. I have minimized the number of the stickers to keep the flexibility of the parts in further builds, therefore only two standard vehicle registration plate stickers and a Trabant logo sticker are used. I wanted to build the model as accurate as possible in this small scale, therefore it contains lots of details: for example the iconic head and rear ligths, the front grill, the side view mirror, the door handles etc... Maybe the most challenging one was the wheel and mudguard detail with a half stud offset. The model has space for one minifigure with small or middle sized hair. If you prefer the Universal version, then you need only 3 extra parts and it is an easy modification. Thanks for visiting, _TLG_ Trabant 601 - instructions 1 by László Torma, on Flickr Trabant 601 - instructions 2 by László Torma, on Flickr Trabant 601 - instructions 3 by László Torma, on Flickr Trabant 601 - instructions 4 by László Torma, on Flickr Trabant 601 - instructions 5 by László Torma, on Flickr Trabant 601 - instructions 6 by László Torma, on Flickr Trabant 601 - instructions 7 by László Torma, on Flickr
-
Hello Skoda and Speed Champions fans, Skoda 105 is one of the iconic Eastern Bloc cars of my childhood. It was a rear-engined, rear-wheel drive small family car that was produced by Czechoslovakian car manufacturer AZNP in Mladá Boleslav, Czechoslovakia between 1976 and 1990. Engine sizes were 1.05 and 1.2 liters respectively. The color scheme of this model is based on my father's first car. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-93968/_TLG_/skoda-105/#details https://www.mocsmarket.com/lego-mocs/skoda-105-building-instructions/ KIT is available on MOCHUB: https://www.mochub.com/moc/skoda-105 It is a studless build in the original, 6 studs wide Speed Champions scale and fits perfectly to the new City style cars too. I have minimized the number of the stickers to keep the flexibility of the parts in further builds, therefore only two standard vehicle registration plate stickers are used. I wanted to build the model as accurate as possible in this small scale, therefore it contains lots of details: for example the front ligths, the front grill with the narrow chrome line and Skoda logo, the side view mirrors and the rear view mirrors, the door handles, the black rubber stripe on the sides etc... Maybe the most challenging one was the C pillar solution. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures: one on the front seat with small or middle sized hair (the rear view mirror assembly has to be removed in this case) and one on the rear seat without any hair. I prefer the model as it is shown on the pictures, but there are some modification possibilties: a) a rear windscreen can be added (there is a more detailed explanation in the last step), b) many of Skoda 105 cars has side view mirrors only on one side, c) on the real cars the color of the door handles and side view mirrors are sometimes black on the other ones they are chrome. Thanks for visiting, _TLG_ Skoda 105 - Instructions 1 by László Torma, on Flickr Skoda 105 - Instructions 2 by László Torma, on Flickr Skoda 105 - Instructions 3 by László Torma, on Flickr Skoda 105 - Instructions 4 by László Torma, on Flickr Skoda 105 - Instructions 5 by László Torma, on Flickr
-
[HELP] FWD with Transversely Mounted Engine and Gearbox
AttentionSpanner posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everyone, This will be my first project in a while, and my first project here. I want to try and make a 2WD (hopefully FWD, but RWD is fine if things get difficult), 4-cylinder car with a transversely mounted engine and gearbox assembly, and hopefully as a studless construction. I started mocking-up some of the gearbox in LDD (I know, not the best tool), and the results have not been too encouraging (space-wise). I haven't yet figured how to post photos, but I will when I do -
1930s Post Office and mail delivery vehicle - 10246 / 10308 inspired model
Murdoch17 posted a topic in LEGO Town
So I woke up the morning of Sept. 22nd, 2022 to the news Winter Village set 10308 - Holiday Main Street had been revealed. I liked some of it (Trolley FTW!) but the buildings were lacking "something". So, I tried to recreate the music store in LDD to fix what I thought I needed to fix. That quickly turned into full-blown MOC only slightly inspired by the set with a fold-open back wall and vastly different interior. More recently, I revisited it to add in a bay window, elongate the second floor, and revise the troublesome roof with a design inspired by set 10246. (Detective Office modular building) The lower floor has got a sales desk with old fashioned cash register, a scale for weighing packages, and a couple safety deposit boxes. The poster on the wall above the boxes will be a "most wanted" mugshot, for a true post office feel. Moving on, the upper floor is the sorting room, with bunches of drawers for route maps / address change requests / etc., cubbyholes for outgoing mail, and trashcans for dead letters. The table is for where the postal employees do the sorting. The rear of the building has a service door to give access to big trucks for delivery / pickup of cross-country mail. The 8-wide postal delivery vehicle was heavily inspired by free instructions for a 6-wide hi-rail vehicle (called the Stud Inspector) I found at the bottom of this page by Brick train Depot. It really is a cool model, and a neat callback to the "Rivet Counter" trucks you sometimes see on (non-LEGO) model railroad layouts. I added a opening rear loading door, a different color scheme, and (of course) revised it to 8-wide. Thoughts, anyone? EDIT 2/3/23: Revised model, added new pictures. For comparison, here is the original MOC: -
My 2nd and a half alternative for 76917. This time i used ONLY parts included in set mentioned before to also modify my previous Dodge Charger SRT alt to a police Charger. FREE INSTRUCTIONS: https://reb.li/m/136757
-
My 11th alternative for set 76908. This time i used ONLY parts included in 76908 to build an another legendary european supercar - Mercedes SLS AMG. With this one i wanted to challenge myself to build an alt without using windscreen piece. FREE INSTRUCTIONS: https://youtu.be/YFI1PhaoYFU
-
My 1st alternative for 76917. (Or the most popular speed champions set this year) This time i used ONLY parts included in set mentioned before to build an another classic Tuner car - Nissan 350z. Truly a legendary car of it's era that was featured in many racing games like NFS Underground 1,2 and F&F Tokyo Drift movie. For this one i was particularly inspired by tuned 350z from NFS Underground 2 that's why i tried to not just only build a stock 350z. But to also include some kinda of livery in model and crazy bodykit from early 2000s. This makes this model a perfect addition to your Skyline and would look nice with it on shelf. FREE INSTRUCTIONS: https://reb.li/m/134869
-
Hello Ferrari and Speed Champions fans, The Ferrari Daytona SP3 is a limited production mid-engine sports car produced by Italian automobile manufacturer Ferrari, unveiled on 20 November 2021 for the 2023 model year. The design references to 1960s race cars, it is a modernization of the 330 P4, with the body work consisting distinguished low driver's seating position, raised front and rear wheel arches, and the Targa top design. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-131689/_TLG_/ferrari-daytona-sp3 https://www.mocsmarket.com/lego-mocs/ferrari-daytona-sp3/ It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer the brick built solutions to keep the flexibility of the used parts in further builds, and therefore only Ferrari logo and simple light gray head lights stickers are used. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic front and hood grilles, the side and rear intakes, the side view mirrors etc... Maybe the most challenging one was the brick built narrow black and red lines on the front. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. On the pictures the red grills on the front are connected only by half studs. However, if you prefer more sturdy models, then full connection is usable too, it is a bit less accurate, but looks decent too. It is a very low build, an can roll well only on flat surfaces. The model has space for two minifigures. I suggest to use helmets, or small hairs, and the upper part of the seats have to be removed in this case. Thanks for visiting, _TLG_ Ferrari Daytona SP3 - instructions 1 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 2 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 3 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 4 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 5 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 6 by László Torma, on Flickr Ferrari Daytona SP3 - instructions 7 by László Torma, on Flickr
-
A small rover I built back in 2020. Credit for the crane arm technique goes to John with his submarine build. The rover features four wheel ‘steering’ and a docking station for the drone. There are more pictures on Brickbuilt.
-
A couple of months ago, I share images of a personal project for a Classic Space piece pack. I send it to Lego Ideas and was rejected. So I designed in around 4 days a space design using all those pieces at once. This is a space lab base with a internal rocket launching platform. The rocket is manned and can hold a minifig inside, Includes a vehicle and a spacecraft. Please help me by supporting this base. We need more cool classic space designs and make Classic Space as great as in the 80s. https://ideas.lego.com/projects/72fff146-8452-4118-889c-72d5a879b235
-
Hello :) Topic for placing in one place my self-made products 8pin wide in the scale of Speed Champions. Pleasand viewing! I will be glad to comments with wishes and criticism :)
-
Hello everyone! Maybe it's too early, but let it happen. What do you think of the Speed Champions series in 2022? Do you think it will disappear or continue, or will it be under a different name? Anyway, personally, I think they will stay with us for a long time (after all, they have made specially new wheels for 2021). It seems to me that there is a good chance to see in 2022 in the SC series such cars: - BMW M8 (maybe GTE) - Pagani Zonda or Huayra - Ferrari - some F1 car - due to Toyota license can Toyota gr010 (hypercar) - maybe some cars from the DTM or VASC series Post comments about what you think.
