Search the Community

(When the base and any other digital creations are built in real life, I will add those pictures into this page.) This is the beginning of a journey through the wormhole to a mini-figure called Benny and a civilization on the cusp of greatness. His continuing mission: to seek out new lifeforms, to explore unknown worlds, all in the name of of science and awesomeness. The year is 1980-something, the name of the theme is Classic Space. Classic Space fortress walls The base as it was ordered... will post a picture of the complete setup when built in real life. Here is the base's main gate. It can open up all the way to allow the ground vehicles though, and as of 8/26/2020 can allow rail vehicles through as well! (EDIT 11/16/2020: Second base gate with train tracks in the works to allow trains to run through base all the way!) This is one of twelve walls sections, held together with the other modules by four Technic pins.(two on each side) This is one of four of the corner modules. I redesigned these since last time to be less parts intensive and have fewer gaps in the wall. Classic Space HQ / Benny's skyscraper - 76038 MOD This building was inspired by my brother's take on set 6398, Central Precinct HQ. He added a back staircase module (which I have removed in favor of an older 2015 Avengers tower-inspired model / MOC I made a couple weeks back), while I removed the prison cell and changed the color scheme from white and black to blue and white with trans-yellow glass. The windows and doors were also modernized, and the large spinning sensor array added to the roof. I've also added connectors to the main base walls, which means the building is fully integrated into my Classic Space base. As previously stated, the rear was inspired by set 76038, Attack on Avengers Tower, from the Age of Ultron movie. This ultimately meant that the 1990's-style model's floors had to be stretched upwards by two bricks each in height to match the newer model's floor-plan. I really like the sleek wraparound window on the top floor of the building, as it is where personal Benny's office is. He gets to look out on the space base, and marvel at how things have changed since his creation in 1984. The right side wall opens up to reveal the inside of the building. Ground floor is official meeting space, second and third floors are for monitoring the radio telescope and other such devices across the galaxy. Fourth floor is the break room, while the fifth floor is Benny's personal office. (Note: On the outdoor patio on floor three is the monument to Jens Nygaard, the gone-but-not-forgotten creator of Classic Space.) The rear tower folds open for access too, and like the side wall, locks shut on a Technic pin. Here you can also see Benny's desk. Classic 1950's Moonraker automobile Inspired by this recent @hachiroku build here, I have completed this new early 1950's car for Benny, who seems pretty happy with it. It will go nicely with my very '50's retro-looking Astrotrain (see it here in Train Tech), of which the final parts for have arrived... but that won't be built until late December. (It's a Christmas present from my family, so I have to wait.) The rear has a license plate, the classic space logo, and two coverings partially obscuring the rear wheels. The roof is held on by four studs, and is as such removable. The two doors open, but the obligatory space seat is missing, because any more height and Benny would not fit inside. As a courtesy to the driver instead, I have included a light bluish gray upholstery for the back of the seat. Classic 1980's Security Forces Jeep (x2) This model was heavily inspired by set 75916: Dilophosaurus Ambush from the first series of Jurassic World sets. I have turned that jeep into a Classic Space vehicle by subtracting most of the features and adding the CS logo to this piece on the trunk and a space seat for the driver. This CS version has a trans-yellow windscreen and a revised roll-cage. The rear of the vehicle has a spare tire, license plate and tail-pipe while the roll-cage folds back to allow for you to place the driver in the seat. Cosmic Explorer This is a heavily modified set 70816 (Benny's Spaceship, Spaceship, SPACESHIP!) to features a new canopy from set 75176 (Resistance Transport pod) for the front windscreen, plus a rear turret that elevates and rotates in lieu of the radar dish and repair robots. To match the new canopy, the crew quarters were enlarged and opening roof remade, but the wings still fold out via the same Technic mechanism as in the original set 70816. More recently, I added a new nose to the ship inspired by DC comics set 76028. (Darkseid Invasion) The rear of the ship features the three main engines. The sensor array that was once near here was replaced by a four-barrel repeating laser turret that can rotate a full 360 degrees and elevate to 180 degrees, allowing for cover fire in almost any direction. The wings fold out if the center engine is pushed inwards, ready for the foam-tipped missiles to be engaged and aimed at any Blacktron III enemies... I did remove those yellow missiles, as they were too touchy and could fire accidentally. The main canopy has been heavily modified to allow for crew to go between the engineering and navigation sections without having to exit the ship. The Unikitty-seat area was replaced with a opening canopy for the engineering and fire-control crew to see outside from their stations near the Imagination Reactor. Deep Space Fighters These ships are deep space fighters of the Galaxy-class. Each seat one figure and have enhanced hyper-drive making it nearly as fast as LL-929. (Benny's spaceship) This ship was designed to be a heavily-armed fighter, and features an enclosed cockpit allowing for long distance travel such as from system to system if in an emergency. The rear of each of the two ship's features two engines made up of four smaller rockets. Here is the cockpit, which can seat 1 pilot figure per ship. Interstellar Frigate I really like this ship and have since I first saw it, I just had to wait for the instructions for set 75293 (Resistance IT-S Transport from Star Wars) to come out to make sure it could be built in real bricks with the changes I had in mind. (which were quite a lot!) I'm so glad I chose to do it in LDD first before just buying random bricks, as it required SO many modifications to the design (including an actual windscreen and extended cargo bay!) and changing other colors, that I would have been completely lost just swapping parts out at random. The eight engines are attached in a completely different way to the set design, as 2 x 4 bricks with three Technic holes going straight down don't exist in LDD. This new design was the only suitable way to get them to work on the ship in a very tight space. Also, I added double raised fins to the rear of the ship, for that extra retro '80's space flair. The cargo bay is quite spacious for troops or freight as it has been elongated by four studs from the set's original length. (You can see it is loaded with five yellow space-crates above) The roof of the cargo bay comes off, while the landing ramps fold up / down for loading or unloading of cargo / security personnel. The front of the ship has a space seat for a single pilot with two large laser forward-facing cannons. The pilot's cabin also features actual controls and a real front windscreen. (unlike the stickers and tiles in the original set!) The cockpit roof folds away, just as it did in the original set, which you can partially see here. K8-E the robot dog - Benny's best friend After meeting the Doctor (Who?) and his K-9 (pronounced Canine) unit, Benny decided he wanted a pet. So he bought himself a retired space police bot named K8-E (it's pronounced Katy) who helps Benny with his maintaining his SPACESHIP! and home base of the fleet. The two robot dogs eventually teamed up to sabotage a Blacktron and Dalek peace treaty from being signed, thus keeping the Universe safe from their plans for conquest for the moment. K8-E even took a laser shot from the Blacktron secondary leader, saving K-9 from being killed in the midst of them leaving the self-destructing Dalek ship. When reunited with Benny and the Doctor a short while later, the robot dog was fixed up and given the nod of approval from the Doctor, and a happy farewell from K-9, who left with the Doctor in the TARDIS to go to parts unknown looking for the Daleks fleeing from their loss at the hands of K8-E & K-9. From then on, K8-E has been keeping Benny company while awaiting the return of K-9 and the Doctor. K8-E is actually modified from set 8399 (K-9 Bot), which is a 2009 Space Police III set. Astro-Bot 33 - Classic Space's Giant Robot You may ask yourself: "Why would the Classic Space fleet want a giant robot?" The answer is a simple one: "Who in their right mind wouldn't want a giant freaking robot!?!?!" This model is a recolored and modified version of @hachiroku Iron Giant model, but remade it into the Classic Space color-scheme. Red and green indicator lights are placed in four spots while the feet feature hidden trans-orange tiles to signify rocket-booster output nozzles that allow for flight. I revised the robot's head, to add a central fin that is more like the 50's inspired original Iron Giant. Bumblebee stripes are also on his upper torso near the neck. The number 33 is printed just above the Classic Space logo using vintage '80's bricks as well, to give it a retro feel. NOTE: After removing the knees and fixing the ankles, the robot stands up a lot better. (I really need to take a picture of it standing up on it's own sometime...) Conveyex Crawler-Transporter This is a heavily modified Classic Space version of 2018 Star Wars set 75217 (Imperial Conveyex Transport). It's length has been doubled and the visible weapons have been removed, to make more room for passengers. Behind the trans-yellow glass of the former cargo-cars are seats, so that workers can get to Benny's space base without driving in themselves. (Call it a commuter light-railroad system, without the "rail" part!) The vehicle can be shortened or lengthened in modular sections depending on the needs of the specific mission, but in this particular case it has two crawler engine units, and two cargo hauler segments that can easily detach for maintenance or to drop more segments in / out. On each of the engine units is the dual drivers compartments, located on either side of the tread behind the square openings. Each car seat four figures, meaning the whole train hauls eight people (+ their air-tanks!). ....and yes, two of the handles on the doors are upside-down in all the pictures. Classic Space figures These are all my Classic Space figures. The thirteen green figures are the soldiers of the group, while while the six red suited people are scientists. The three blue figures are Benny (in helmet), Penelope (with pigtails), and Unikitty who are the officers of the group. The two other figures, (the red android and the robo-dog) are T-3PO, who serves as the translator to other species and computer systems, while the robo-dog is K8-E who happens to be Benny's personal pet / security guard. The astronauts you see here are the famous "Lost Six". These half-dozen brave souls were with Benny in 1988 when the space station they were on was ambushed by Blacktron I forces and blasted into a black hole. Benny managed to escape the station before it entered the gravity field, but only just in the nick of time. (He could not reach his ship mates due to a computer error with the hatch systems.) Benny's suit was damaged in the escape, and he still wears it like that to this day as a reminder of his failure to get his crew off in time. This is the last picture of the Lost Six, with Benny out of frame because he took the picture. (He was supposed to be in the picture, but he forgot to set the timer on that take.) Will we ever see these brave men and women again? Only time will tell! Meet AstroKitty (in blue) and PuppyNaut (in white)! I've had AstroKitty built like this since 2014 when I got Benny's Spaceship (x3) from the original LEGO Movie line. I had to find a novel solution to the head-falling-off problem. (double the body width and pretend it's a bigger spacesuit) I was very sad to see Lego never released a blue one of the upside-down 1 x 3 tile parts with hole used in the newer Unikitty! sets seen around 2018 to correct this error. I did, however, note the new arrival of Puppycorn, Unikitty's energetic younger brother from the TV show and was disappointed to see he never had a Classic Space variant, besides the "Alien" version. (which I don't count as actually being Puppycorn.) So, in short, I made one from his Dalmatian costume, made to be double wide like AstroKitty. Sadly, there is no Classic Space logo on Puppynaut, as there is on Astrokitty. (This drives my OCD nuts!) ...oh, and they have headlamps on both their helmets, to provide light in dark environments and a convenient hole for the unicorn horn to fit into. I have used what was left of the word astronaut as originally worded by LEGO, as in ASTRO goes with KITTY; so thus PUPPY gets hitched to NAUT. Thus, we get PUPPYNAUT to describe him. EDITED 11/3/2020: Puppynaut and Astrokitty have been added to this post! As usual, Comments, questions and complaints are always welcome!

These are builds inspired by or taken from the first MMO made for Lego: LEGO Universe. This game had very few real world items in sets, but two things did come out: ...a astronaut for people who pre-ordered the game in 2010... ...and a rocket that was modular in the style of the game (Nose + Cockpit + Engine) and was released in a LEGO Club event to build your own rocket. (both pictures from Brick Link) The game lasted barely past it's first birthday (October 2010 was when it started), with the plug being pulled on February 1st 12:01 AM 2012. As a testament to the game I played and loved, I built some models that continue the story past 2012 and into 2015 and beyond. Here are those builds: The Neo-Nexus Force, pilots, droids, and officers. The NIFT-E robot was designed in 2015 to compliment the thousands of Sentry (set 4416) series robots produced in 2006 by the X-POD corporation for the original Nexus Force founders. Thirty-four of these newer robots were produced in 2018 as a test batch, called the Nexus Iron Friendly Teammate - Engineer class (NIFT-E) for use as spaceship ground-crew and heavy engineering duties, including fueling and heavy duty maintenance, computer updating, and guiding ships into landing zones. They are used alongside human counterparts who work on the harder to reach areas of a ship's engine, and on life support systems. Each human master mechanic (of which every base has at least two or three of them, plus several apprentices) is assigned an NIFT-E counterpart, in which they are equal partners working towards the same goal: keeping the ships flying, the base humming with life, and repair bay as empty as possible in case of emergencies. I copied this back in 2012 from a desktop download from the old LEGO Universe game. It was carefully cut out and switched to gray scale to save ink. It is the logo of the Nexus Force. Due to the Nexus Force logo not being found anywhere but a expensive mini-figure torso from a limited edition polybag, I have decided to change the logo to something different. This new logo is seen in the 2014 CITY Arctic sets. I figure this is my in-universe explanation of the logo change: This moon base-like space base model was inspired by set 60036 (Arctic Base Camp), with a rooftop shield generator partially lifted from set 75098 (Assault on Hoth) and a sensor array inspired by set 76157 (Wonder Woman VS. Cheetah) The base consists of eight separate, interchangeable, modular sections, all of which have opening roof / wall sections for ease of access. These sections include (but are not limited too): a common bunk room, a spaceship control tower, a fusion generator, communications room, break room, and several more. Fictional history of the base: The Nexus force landed on an ice world named DY-17, (this was soon to be renamed Ice Station Destiny) in a bit of desperation, as the Maelstrom had damaged their escape cruiser, the Bright Hope, to the point of near hyper-drive core failure. The ships sensors located no technology on the surface, and not many life forms, but a lot of geothermal activity in the form of large heat/steam vents from the core to the surface, which could be used for emergency power. The ship landed, and soon the base camp for the crew of the Bright Hope was set up. It was then discovered the planet had many mineral deposits that happen to be compatible with the metal in the Hyper-drive cooling system. So, the minerals began to be mined, and pretty soon the crew had a good operation going that was almost self-sufficient and very eco-friendly. A vote was taken, and the crew chose to stay on the ice world they re-named Ice Station Destiny, as the planet had supplied all of their wants and needs. The logo was repainted to show the original Nexus logo as a distant star, signifying the journey taken by the Bright Hope to their new home world, which was symbolized by the ice-covered world on the logo. The Bright Hope and crew were eventually discovered two years after their landing on Ice Station Destiny by the Norstas of the nearby world of Beta Polaris. Bob formed a friendship with this like-minded race, which eventually became an Alliance between the two forces, and the rest is history Common bunk room, as everyone on the base sleeps in shifts in these bunks. This corner hall module also leads outside via a back door. (not visible here) The beating Nuclear heart of the base. It is powered by cold fusion, and is situated at the center of the base, under the radio communications antenna. This deep-space communications room is where every listening post the Nexus Force has comes to bear it's potentially deadly load. What are they listening for? No, it's not the latest M-TRON corporate gossip or Blacktron III secret battle plans. It's whether the Maelstrom has figured out how to invade our universe from the old pocket dimension they have been sealed away in. This ultra top secret project has listening posts attached to an uninhibited asteroid or comet in almost every known sector of inhabited space. They plan on finding out where and when the Maelstrom ever invade (if they ever do) and planning a counterattack with all available forces before they can even fully emerge through the rip in space-time. The fusion reactor's control room. This module leads outside to the base's elevated landing pad. Upstairs is the flight control tower. This tower makes landing large spacecraft easier, and helps keep an eye out for unwanted guests. It sits on top of the previous module. These computers analyze rock samples looking for fuel traces to be mined. The break room is mostly taken from set 60036, with the addition of the Death Star plans. (Why not?) The radio array on top of the nuclear reactor. SPACE VEHICLES This ship was originally set 70816, Benny's spaceship (x3), with the Unkiitty seat and radar dish removed in favor of a skylight and laser gun turret instead. The sliding wings were redesigned to be stationary and thus provide space under the turret for commander Bob. The ship also has separate passageways for crew to walk so they don't have to go outside to go to Bob, engineering, or the bridge. More recently, I combined the ship with a more elongated nose taken from the 2015 DC Comics set 76028 (Darksied Invasion). I was inspired to build this model by this cool ship by Oran Cruzen as seen here. The ship has three areas for up to eight crew to be placed, with passageways for the figures to "walk" from section to section. The rear of the ship has three engines and a rotating, elevating laser turret above. This rocket was originally poly-bag number 55001 from the failed 2010 MMO Lego Universe. Just like in the game, it can split into three modular parts connected by Technic axles. These sections are the following: -Nose-Cone -Cockpit -Engine The rockets can be dissembled into the three component sections and are interchangeable with each other, and with about 15+ other rockets available in LDD form from the Lego Universe Wiki. Also, the completed rockets can seat 1 mini-figure each. This small and nimble fighter was designed after looking at a Classic Space model I found on my hard-drive. (I think it was inspired by a model my brother bought off Brick-Link a couple years back.) Anyway, I then tore the model apart and have added four guns, larger wings, and the larger air intakes from my Nexus tower rocket. The ship features an enlarged cockpit with controls and seating for one figure. The rear of the model features one tail-fin and two engines exhaust ports. LAND VEHICLES This 1960's-inspired sports car is one mean-looking space-driving machine! Partially inspired by Lola the car from the TV show Agents of Shield, (although this one doesn't fly) this is Bob's ultimate ride. ..and it even has room for taillights! (no exhaust pipe needed, this thing runs on clean fusion.) This model is a slightly modified version of set 60033, Arctic Ice Crawler that I call the Mobile Ice Driller . Whereas the original set has a crane hook, this one has a much more useful drill bit. The drill is used for mining energy crystals embedded deep within the ice of the frozen world on which the Neo Nexus Force is stationed. This is a very slightly modified version of set 60035: Arctic Outpost. All I really did to this one was add the symbol to the front fender. The inside of the mobile outpost is a lab, complete with Bunsen burner and microscope with crystal sample. It seems the computer hanging from the ceiling bar is off right now, as the scientist is out collecting more samples that were dug out with the Mobile Ice Drill. The rear of the model is pretty sparse in details, and as such, their isn't much to say about it. The snow speeder you see here is a simple vehicle to aid in fetching luggage and equipment across the base. It is armed with a flare gun and a radio. These come in mighty handy when the sun sets and temperatures plummet to well below minus 125 Fahrenheit! FINAL THOUGHTS Well, that's all I've built so far, but that's not the end of the story or the models. Scott Bourgeois from MOCpages has made some pretty awesome stuff related to the Neo Nexus Force, their first allies, the peaceful Norstas (from the planet Beta Polaris in orbit of the the North Star) and the common enemy, the Xantukans. (inspired by the snake cultists from Ninjago) Here is a link to his Neo Nexus Force page with related builds: http://www.mocpages....lder.php/189764 EDITED 9/7/2020: Added pictures of Bob's new sleek 1960's sports car to the first post. Any thoughts / ideas / complaints would be appreciated!

[MOD] Martian Colonization Base, 4x 60227 I transformed the lunar space station into a Martian land base for colonization The blocks / modules are perfect. I also made a small NPU with train part number 55768. It makes excellent glass roof/skylight :) Picture on high quality 4096x3072 on my flickr [MOD] Martian Colonization Base, 4x60227 by Horlack, sur Flickr

Hello again, Eurobricks! Here is my new work based on the universe of Warhammer 40000 tabletop game. The following story is not a part of WH40k official lore, but my own creation. An exile. He was banished from his own craftworld by his own student. The rescue of a human hive world at the cost of Aeldari lives brought consequences. He had to flee to a distant, forsaken, barren planet that previously belonged to the ancient Aeldari Empire, and there he built a wraithbone tower where he lived as a recluse. Two hundred Terran years have passed. The old friend brought news about the fracture of Biel-Tan. And about the birth of the Ynnari, a new cult of Death God Ynnead that gave a new hope to divided Aeldari (or Eldar, as they were called before) tribes, promising to end Chaos menace once and for all. And the exiled Farseer moved on and understood that his war is far from over. He rallied like-minded Aeldari from his home craftworld and other places, and together they turned his hideout into a base of a small army fighting on Ynnari's side. The base is built on a deserted, barren planet. The shining structures made of wraithbone, an Aeldari psychically-sensitive material, are raised atop a cliff. The fortress consists of three buildings: the Farseer's tower, the Soul Shrine and the plasma generator: Not far from the hideout a portal to the Webway, the trans-dimensional network of tunnels used by Aeldari for transportation, is located: Like the road, it existed before the Farseer arrived at the planet. Now the Ynnari use this ancient arch to appear on other planets and strike at their enemies such as Chaos, Necrons or Tyranids: The wraithbone staircase leads to the entrance: The Soul Shrine was erected after the Farseer pledged himself to Ynnead. This building serves as an armory and a training center: Its shape was inspired by Dawn of War video game: The plasma generator provides energy for the base: It looks like an Eldar generator from Dawn of War: A conservatory with air filtration system is located near the generator: Aeldari buildings are white, decorated with lots of gems and stones. A transparent dome rises above Farseer's tower: An ornate spire crowns the tower: Walls with windows - there are corridors behind them: Some technical device is located near the Soul Shrine: The Farseer's tower stands on ornate yet sturdy supports: Б A side view: Now the hideout is attacked by the forces of Chaos, led by Space Marines from Death Guard Legion. The Farseer had to get support from Ynnari leaders and Drukhari to repel the invasion of Eternal Enemy: Yvraine, the Daughter of Shades, the Herald of Ynnead and the leader of Ynnari clashed with a Chaos Lord who worships Nurgle, the God of Rot. She wields Kha-vir, one of ancient Croneswords, and is accompanied by Alorynis, her loyal Gyrinx familiar: Along Yvraine the Visarch fights. He is her mysterious bodyguard who never takes off his helmet. He is armed with Asu-var, another Cronesword, and strikes with it the Plaguebearers - virulent daemons of Nurgle: The exiled Farseer of craftworld Ermyaris leads his followers to battle. He is reading battle spells, holding up his Singing Spear, and his Gyrinx Murzinx enhances the psychic power of his master: Howling Banshees Exarch Eyla - the very same friend who told the Farseer about the Ynnari - strides towards Poxwalkers of Nurgle. She will destroy these plague zombies with her Executioner before they spread their foul diseases: Autarch Xaniele who left Ermyaris by her own will, rides her jetbike, armed with laser lance: Chaos forces advance. They have Chaos Space Marines, ordinary humans and daemons: The attack is led by Pestilens Bubulgor, Death Guard Chaos Lord. Like all Space Marines from that Legion, he bloated due to blessings of "Grandfather Nurgle" and merged with his power armor, through which horns and bones began to protrude. The Chaos Lord is armed with a manreaper scythe crowned by the mark of Nurlge, and a plasma pistol: Chaos Lord is accompanied by Plague Marines - common Death Guard warriors armed with boltguns. Like their leader, they turned into monstrous mutants: Plague Marines are joined by our old friend Nefaros. This Noise Marine from Emperor's Children Legion can now boast with his stylish guitar that can not only make disgusting noises, but shoot bolts and fire! And it bears the mark of Pleasure God Slaanesh! Near the Chaos Marines march the cultists - ordinary people from various planets who are devoted to Chaos. This particular cult is led by an old psyker who worships Tzeentch, the God of Knowledge and Magic: Poxwalkers slowly shamble behind human Chaos followers. These mindless zombies were once Imperial workers who got infested by Nurgle's plague: Near the Poxwalkers, an ogryn fights. This big and strong, but very stupid abhuman mutant joined the Chaos Cult only because of loyalty to his commanders. Plaguebearers - the disgusting one-eyed, one-horned daemons of Nurgle: United, the Aeldari stand tall against the minions of evil: The Farseer is aided by Drukhari - Dark Eldar who abandoned their vile lifestyles and joined the Ynnari. A Drukhari Reaver jetbike emerged from the Webway gate, firing at Chaos followers from a splinter rifle: This Drukhari squad is led by Archon Teniria who came to Ynnari with the pursue of knowledge: A Drukhari sword master from Incubi order fights with Bloodletters - the daemons of Blood God Khorne: Spiritseer Tillmiele casts her spells, calling to Aeldari souls: The base is defended well. Support platforms with D-cannons that create holes in reality, and Ranger Moyaz shell the enemies from the walls: The battle is in full swing: The barren battlefield landscape: And here is what the hideout looks inside. I wouldn't have been myself if I didn't make the interior: The entrance hall and corridors are elevated above an underground cave: This large and spacious hall is a good place for meetings and discussions: The entrance hall has a glassy floor: You can see behind it an enigmatic fountain with swirling souls. Even the Farseer does not know what it is. These ruines apparently remained from the ancient Aeldari Empire, and now the soul magics made the plants grow around them... The corridors have high windows and statues of ancient heroes: In the conservatory, the Aeldari grow vegetables and fruit for food. It also reminds them of the nature of their home craftworld. And of their ancestors' real homeworld that was utterly lost after the Fall: The garden is inhabited by Gyrinxes and other animals. The Aeldari grow the seedlings with special lamps: A generator room is placed above the conservatory. Here the control panel for the plasma generator is located. The mechanisms are maintained by a hovering drone: The Aeldari have forgotten how to make these robots, so they do not use them in combat. The generator's roof with a spinning crystal: Let's move to the Soul Shrine. Here is the Chamber of Wisdom where the Warlocks practice their battle magics: The female Warlock levitates without CGI. It appeared this way because of here cloak, and I chose to keep this detail. This room contains all for peaceful rest and thoughts - even tea to drink between practice: You can also go to the balcony to see the bleak landscape of the planet: The Chamber of Khaine is located on the next floor. There the Aeldari God of War is venerated. In this halls, Ynnari warriors keep their weapons and do their training: The Chamber is lit by flames in chalices: The next floor is dedicated to the Chamber of Spirits, the place where Spiritseer Tillmiele comprenends the magic of souls and wraithbone: Tillmiele's table is full with artifacts and has a flask with deceased Aeldari souls: In the Shrine's attic the shuriken weapons are stored: The entire tower above the entrance hall contains Farseer's personal apartments. It is the oldest part of this hideout: The interior has a chair near a stained glass window and a cosy bed: Another stained glass window and an exit to the balcony: The Farseer can look through his telescope at the stars... and at the glooming red scar of Dathedian, the Great Rift that tore apart the Galaxy: Near the large purple window, a table with magic equipment, a Singing Spear holder and Murzinx's dish with a fish are located: The thoughtful Farseer and his Gyrinx: The Farseer studies ancient texts at his desk and stops to pet Murzinx: Above the heads of the Farseer and his high-ranking guest, shelves with potions and scrolls... and the vines can be found: Under the dome a pillar of shining soul energy comes, and around it plants with precious gems grow: The very same phenomenon was observed under the glassy floor. The Farseer cannot explain this magical effect yet. The spire houses a small room with various old artifacts: Here the Farseer stores his previous Singing Spear and a stasis cell with the spirit stone of Myranna - his deceased sister. Let's move to the dungeons. The Soul Shrine contains the library with many texts about magic and Chaos collected by the Farseer himself: The workshop where the Bonesingers repair the jetbikes after battles: Aeldari engineers use unusual tools such as a psytronome which rests on a table: The refectory - the place where Aeldari cook and eat their food: Cells with beds where Aeldari sleep and live: Now, when the tour of the Farseer's base is over, it is time to look at the characters. Let's start with servants of Chaos. The Lord (at center) and two Plague Marines of Death Guard - disgustingy resilient mutants with bone protrusions on their power armor: The Chaos Lord is armed with manreaper scythe, and the Plague Marines are armed with boltguns. One Plague Marine holds a bell - one of Nurlge's symbols. For this MOC, I changed the construction of Space Marines maxifigures from the previous work, and now their arms do not look like sticks. The back view - here you can see how Nurlge's "gifts" change even the power armor backpacks: Noise Marine Nefaros is a maniac who loves to kill with sickening sound waves. The bright colors of his armor and a guitar-shaped sonic weapon are a reference to old 80s Noise Marine miniatures: Nefaros from the back: Plague Marine and Noise Marine are brothers forever! Here you can see that a Plague Marine is taller than a Noise Marine even with his "disco" heels. The blessings of Nurgle make his followers bloated. Chaos Cultists: I had a lot of fun inventing this patchy scum. Their leader is a Tzeentchian psyker so he wields a bird staff. A standard bearer holds a Chaos Star sigil. Ogryn's horned helmet is a reference to old "bone 'ead" Ogryn Imperial Guard sergeants. Chaos Poxwalkers - plague zombies as they are: Lesser daemons of Chaos - Bloodletters of Khorne and Plaguebearers of Nurgle: Now come the Aeldari. Yvraine, the Prophet of Ynnead, the Visarch (it's a title, not a name), her mysterious champion, and Alorynis, her pet Gyrinx: Yvraine wears a dress back from ancient Empire days, and the Visarch is clad in ornate Bel-Anshoc style armor. They appeal to old ways because they want to restore the former glory of Aeldari race with the help of Ynnead who can defeat Slaanesh and Chaos. Yvraine's dress and Visarch's collar are lavishly decorated: Yvraine, the Visarch and Alorynis are the only canon Warhammer 40000 characters mentioned in this topic. I have some units in the form of WH40k miniatures, so I can compare LEGO and Warhammer 40000 versions with each other. Here are two Yvraines and two Alorynises: And two Visarchs: The psykers of craftworld Ermyaris - two Warlocks, the Farseer and the Spiritseer. And, of course, Murzinx - the Farseer's Gyrinx and the descendant of Murzion: Warlocks and the Farseer are armed with Singing Spears and shuriken pistols. The Spiritseer wields a staff and a dagger. Farseers and Murzinxes from LEGO and Warhammer 40000: Spiritseer Tillmiele and her prototype from the tabletop: By the way, she was a student of Spiritseer Salarian who remained loyal to the current ruling Council of Ermyaris. Warlocks - two minifigures and one miniature: Now I have a good explanation why my Aeldari do not wear helmets - in canon many Ynnari do not wear them either. Autarch Skyrunner on her jetbike: She wields a laser lance, and twin shuriken catapults are located beneath the jetbike's hull. Two Autarchs - note that this miniature bike is outdated, so I based the LEGO version on a newer one: Exarch Eyla (at the center) and two Howling Banshees: These female warriors are armed with power swords and shuriken pistols, and the Exarch wields the Executioner power glaive. Banshees from two different worlds: Ranger Moyaz in chameleoline cloak, armed with sniper rifle: With a WH40k Ranger miniature: Guardians are the civilian militia of craftworld Aeldari. Two of them wield shuriken catapults, and other two operate artillery platforms: Guardians from LEGO and the tabletop game: Vaul's Wrath anti-grav artillery platforms with distorting cannons (or D-cannons): They are used as defensive weapons of the base. A platform with its prototype from Warhammer 40000: Drukhari (or Dark Eldar) - an Incubi, an Archon and a Wych: Archon Teniria is a sophisticated person who likes philosophy, so she dresses more gallantly than her edgy brethren. Drukhari Reaver jetbike: The civilians - every base needs maintenance personnel. And, of course, Gyrinxes to catch mice! A bonus frame - an unlucky take or... something more? Thank you for watching and reading! You can see all these photos at my Flickr gallery!

Hello there ! Here is my first post on Eurobricks and I wanted to share with you my latest Star Wars MOC : ‘’Underground Clone Base On Kashyyyk’’ This Moc takes place during the end of the Clone Wars and represents a base that would have been dug in the deep jungle of Kashyyyk. I’ve try a lot of new and advanced building techniques for me. For all the fans of the Lego Star Wars games, there are two little details I think you’re gonna like ;) If you want a cinematic video of this MOC, here it is : https://www.youtube.com/watch?v=LBlj2BaSDEI Underground Clone Base On Kashyyyk by Hugo, sur Flickr Underground Clone Base On Kashyyyk (back) by Hugo, sur Flickr Underground Clone Base On Kashyyyk (top) by Hugo, sur Flickr Underground Clone Base On Kashyyyk (-2 and -1) by Hugo, sur Flickr Underground Clone Base On Kashyyyk (-3) by Hugo, sur Flickr

It has been years after the unspeakable and the survivers used whatever machinery they found to make a new start. The last bit of civilization was rebuilt in a form of the mobile base nicknamed the FrankenBase due to the nature of it's design. Frankenbase was assembled from the following leftovers: Buckets and bogies from a pair of tracked loaders Front frame, suspension and axles from a monster truck Command bridge and helipad from a stranded ship Crane and two containers were salvaged from a dried up port The base also features three support vehicles, a quick buggy, a small bulldozer and a helicopter: To propel the massive base, all wheels and trackes are driven and suspended: The suspension allow the massive vehicle to easily crawl over rough terrain: The track bogies can also steer, giving the FrankenBase a very tight steering radious: The only way to acces the abse is by lovering the ladder in front, which also serves as the ladder to acces the walkways surrounding the entire vehicle: The crane uses a special mechanism which locks onto containers in order to move them: The command deck is protected by nets and features controls: View of the backside with the crane raised: Some trivia about the model: The entire model took me around 2 weeks to build All functions are powered by 19 motors and controlled by 6 BuWizz bricks It measures over 130 cm long, 45 cm high and 40 cm wide The weight is estimated to be around 7 kilograms This is my second largest model built, first being the Go-kart It's one of my most eccentric builds ever The different colors are intentional, representing the chaotic nature of it's envoirment Size compared to the Liebherr: See the model in action the video:

Hello SW fans, Wanted to share my Hoth turrets playset. It's inspired by a vintage toys from the early 80s but useful for today dioramas. I tried someting new for the turrets and the radar cannon, hope you like the result. Building instructions are available on my website : Hoth turrets If you want more photos, just ask me ;) and I'll post them here.

Here's my rendition of the rebel base at Yavin IV's Massassi temple. I was working from the sketch model as an inspiration from the DK Star Wars Lego: The Visual Dictionary from 10 years ago. This one isn't as big or fancy, I didn't make the exterior of the temple with quite as many radial outcropping as the 'real' one and instead opted for a simpler, square-ish approach. But getting all the important locations in there was key - briefing room, command center with map of Death Star approaching, medal ceremony hall and of course the trooper from Alderaan in the watch tower.

Hi all. I'd like to share a MOC I made over a year ago which I only just got around to photographing recently. Our fearless heroine on long range patrol, will she make it back? 919 CS Spaceship Right Side v1 by Magma Xenoliths, on Flickr Of course she will! Classic Space Welcome Home - Front On by Magma Xenoliths, on Flickr Close up Classic Space Welcome Home - Close Up by Magma Xenoliths, on Flickr Angle shot of base Welcome Home - Left Side by Magma Xenoliths, on Flickr And I also had a bit of fun with photoediting... so here is an attempt at some box art. 919 CS Spaceship Left Side Box Art by Magma Xenoliths, on Flickr And here is a photo of the various sides of the spaceship itself: CS Spaceship Multiple Views by Magma Xenoliths, on Flickr I had a lot of fun building this. I wanted to do something with the new trans yellow windscreens (well new at the time anyway!) and built that area... and then built the engine... and then had to figure out how to connect them together! I like how sleek it ended up. I confess to swooshing it a few times... ;-) I also played around with greebling on the underside and that turned out to be surprisingly tricky to do, my hat is off to those people who make it look effortless. I referred to it as 919 mainly because it is closest to 918 -"One Man Spaceship", which is the largest Classic Space ship I had as a kid. But I didn't set out to make an update to 918... I just wanted to build a Classic Space ship... :-) Larger resolution pics available on flickr for those who like that kind of thing. Hope you enjoy, thanks for looking.

How can i create a baseplate in Lego Digital Designer

I’ve always liked the classic Ice Planet theme that LEGO made, and after looking at Chris Perron’s incredible Ice Inspector and Siercon and Coral’s magnificent Ice Planet Base, I wanted to try my hand at a build in the classy blue, white, and trans-neon orange colors. I’m quite pleased with the result, and it was very enjoyable to build. The micro truck outside the main base is supposed to be a rendition of Chris’s monstrous Ice Inspector that I linked to earlier in the post, though unfortunately I wasn’t able to pack in all the details on it that I would have liked to. Hopefully it is still recognizable as being inspired by his masterpiece though! This build was my first time trying to incorporate lights into a model, which was both fun and frustrating at times. I’m pretty happy with the result, but if anyone has tips or suggestions about ways to improve it, definitely let me know! I also want to give huge thank-you to Graham Gidman for helping me out with the edit, I know it wouldn’t have turned out this well without his help! Lots more pictures on Brickbuilt. Thanks for looking, C&C welcome!

Hi, This topic is dedicated to an awesome classic space build "LL928 Comes Home" MOC by Wolf Leews (/instruct. by Jeff McClain). I've just found some days ago on the net. ANd baang.. I want to build it to my kid!!! I was love at first sight. This base is cool, not too big, you can handle, appropriate size for a small exploration outpost and AWESOME!!!! https://ideas.lego.com/projects/e171cf44-c810-4f03-8e24-6d51e5a9bcfd https://rebrickable.com/mocs/MOC-1865/wolf.leews/ll928-comes-home-spaceship/#bi Unfortunately the dll or instructions not available anymore... Can someone help us? Please share the LXF files or instructions with us. This awesome craft was here also: THANKX!!!!

Ive been working on a stop motion lego movie since last years august, which heavily features this republic clone base. This is my first ever attempt at a clone base, using no brick linked ordered pieces, instead only using pieces from my own brick collection and my destroyed (2008) deathstar. These were taken 5 months ago, and i cant take any more pictures of the base because i destroyed it when i finished filming all of its scenes. The turret is an old moc of mine of the "75088 senate commando battlepack" turret.

Service Status: Still looking for somebody to perform this task. Hello, as the title states; I am for looking for somebody who can digitally design me a imperial base with a budget of $300 in total as well as create a list of bricks to purchase from bricklink so I can build it myself. I expect the model to be detailed, high quality, and look good. I never made any builds digitally so I'm not sure how I would be able to rebuild it from a online model but I'm sure you can help with that. Total build budget is $300. You get paid the remaining amount after cost of bricks. So for example, if the build costs $200 from the bricks, then you get $100 as payment. You may use any software as long as it can be easily reproduced physically. I think stud.io would be a good software to use as it links with bricklink to buy parts easily. Here are the specifications and features of the build. Also includes picture examples from similar MOCs and feedback on them. This document has been recently revised with more detail on 7/24, https://pastebin.com/9FDgvCRB Post here or PM me if you are interested in doing this service.

Hi all, Thought I'd share my "Nexo Space" scene. I built it a couple of months ago for New Elementary's ongoing "Nexogon" parts festival. True or not, I'd read news that the 'Lego Movie Sequel' was going to be set in space... I surmised that this would therefore be Benny's Space, Classic Space the joyous 'space' of my childhood. The Hab/Lab/Base was a structure I'd adapted from a set of spaceships I'd built as my first submission. I was way too late for Febrovery, but what kind of space scene would it be without a rover of some sort? ...and then there was the question of Benny. He'd need a spaceship! I really do hope that 'The Lego Movie Sequel' is going to be set in Benny's Space, and that the sets include more Classic Space inspired designs for vehicles... new printed classic space logos and trans yellow windscreens please! Also, New Spacemen minifigures in other colours!

M:tron base was shown first time March 18th, 2017 at Zbudujmy.to LUG exhibition, Bytom, Poland. Today it is premiere on the internet :) Read more Elevator: https://www.youtube.com/watch?v=LYVZXZaKAYQ Bigger photos and full story here: LEGO Gallery - [MOC] M:Tron Base Follow my new MOCs and articles at: Facebook | Flickr | Google+ --- Notice: This is a shortened version of the post from LEGO Blog - Bricks' Treasure.

Almost completed my Mars base still waiting on 10,000 1x1 round plates in lugbulk to finish the ground detailing so had to display it as is at our show last weekend. I will be showing it next year as it will be ten years since Mars Mission and will be adding more Mars Mission sets to the display, and a hanging frame so they can be suspended above it.

Planet: F04 Tags: Military, Civil, Building, Vehicle, Land Vehicle, Spaceship (The Briefing Room before departure of Freegate) Week65_001 by boxerlego, on Flickr Captain Logan: This is your briefing session for your next Mission. You are Now Top Engineer for Operation T. As Top Engineer it is your objective to Ultimately Capture and Locate a M.A.N.T.I.S. Missile Control SAM Base along with all the Hidden Underground Missile Launch Facilities. We have a Location On Planet Illustria for you to check out if and see if you spot anything out of the ordinary. Our Experts don't know exactly where this Missile Control SAM Base is along with the Underground Missile Launch Facility. The Experts have Picked a point to enter the planet from to keep a safe distance and once your in the planets atmosphere we advise you to drop and Fly Low to the ground and use the mountainous terrain to your advantage from being locked on by the Missiles and picked up by the Radar. Boxerlego: Interesting, But isn't that a bit to much to ask for from One Engineer Wouldn't you say? So your just sending One Engineer and expect to take over this Hidden Missile Base. Captain Logan: No, We are sending Our Top Engineer to take over the Missile Control SAM Base from there you will be able to gather and know all the exact coordinates of the Hidden Underground Missile Launch sites. This Job is perfect for you after all you an expert at this Boxerlego and besides the Higher ups wouldn't have selected you if they didn't think you have what it takes to do this after all you will also have Ronin the Kawashita Ninja Robot and The Top Secret Black project itself the Spaceship so you certainly have the tools to do what it takes that is expected from you. Boxerlego: What makes this base vernalable to capture just by one Engineer? Captain Logan: Glad you ask and the Simple Answer is Robots. See most this base relies upon the function on robots from the use of several kinds of turrets and to the Vehicles that accompanied it all Controlled by a Central Control unit at the Sam Base. If the Spaceship is able to control the Central Control the Spaceship will be able to gain Control over the Facility. I know it sounds simple in explanation but when it comes to the Engineering that is your part to figure out. Now that has been said I will be giving you a few items that will help you in your endeavors, You should know what the items are and that basically concludes this Briefing. Good Luck. (Fast Forward to the Present) Week65_002 by boxerlego, on Flickr Boxerlego: This is Boxerlego here I have laid Eyes on the target base and Wow it looks heavily defended. Is that a Cannon? Week65_003 by boxerlego, on Flickr Boxerlego: I Might as well search around the area and see if I can find anything of interest here. (Around Half hour of searching Boxerlego Found an Antenna and manage to connect the spaceship to the antenna) Week65_004 by boxerlego, on Flickr Boxerlego: Wow, This is amazing Spaceship so you can take Control over the base from this point here. Spaceship: Not Exactly. I can only gain control over certain systems such as the Gate and a Buggy. But I still don't have access to the main Missiles system so allocation of all the missiles will still need to be completed. That can only be done If I get access from the Main Controls in the Base. I will make a CD key. When this is put in the computer in the control room it will give me more access to the bases Controls. Boxerlego: Spaceship, I want you to drive this buggy over here and drive it back to the base and make sure to open the gate for me. Spaceship: Well there is one problem with your plan. You are a human and that base has orders to kill all humans right now and the only way to change that is to send Ronin in with the CD Key and put it in. Ronin is more capable of getting past the Base sensitive defenses systems It will be like he was never there. Boxerlego: Ok, then send this buggy over here and I will unload Ronin out Spaceship: Buggy is on the way and the CD Key is Finished. Week65_005 by boxerlego, on Flickr Boxerlego: Ronin its your objective to put this CD in the Bases Computer. Also Where did you get the hat it looks good. Ronin: (In Silent Mode Ronin receives the CD from Boxerlego and gets on the buggy and then heads toward the SAM Missile Control Base to complete the objective) Week65_006 by boxerlego, on Flickr Week65_007 by boxerlego, on Flickr Boxerlego: Boxerlego Sending message back to Command. I have gained complete Control over M.A.N.T.I.S. Missile Control SAM Base along with all the Hidden Underground Missile Launch Facilities has been Completed and the Coordinates of all the Hidden Missiles Launch Facility Sites are now known, waiting for further orders. End ------------------------------------------------------------------------

Hi I am back from holiday i spent the last past 2 days on this build and rendered it of 360° turn on bluerender took 2 hours and 11 minutes tops. I reckon it came out well I hope you's enjoy it and the acclemator class mK.II or 2nd build is comign soon so stay tuned for that. The images you have been waiting for are here:

Hi again! Finally, the Base is finished. Yes, completely finished. Not a WIP anymore! These pictures are from ALEBRICK2015, a Lego fan event that took place in May 2015 in Madrid, Spain. I hope you enjoy the pictures. Feel free to ask anything you want. More pics will be published later! These are the general pictures. The base is 1.6 x 1.6 meters, 16 baseplates (yes, very big, I had to visit the physiotherapist after this event, my back suffered much of loading and carrying heavy boxes) The Base has a 180-strong staff: 109 snowtroopers, 24 shadowtroopers 12 SpecOps stormtroopers, 12 AT-ST pilots, 5 officers, 15 administrative-service staff, 1 mechanic, 1 cook, 1 medic. The buildings in the Base are the following: MULTIPURPOSE BUILDING: DINING ROOM, KITCHEN, PANTRIES, ARMORY, GYM, LAUNDRY, BAR-CINEMA (hey, a bar is something essential if you are from Spain) This post will only show the multipurpose building. -DINING ROOM This is the dining room. More than 50 seats for the staff. A very greedy snowtrooper has an extra-stuffed pizza. Fat! This one...better not to say anything. Should anybody inspect the kitchen to prevent this? -BAR-CINEMA These ones want to have a kiwi. Too much food for too few! Training with simulated weapons is a good idea. Lobster day!!! -GYM AND LAUNDRY The Imperial Navy takes care of its troops. a Gym with a sauna, jacuzzi and cold water pool is necessary to keep high the morale of our troops. State-of-the-art running machines and boxing bags Cold water pool Sauna (better without armour) Sometimes the Imperial Navy´s cheerleader team leader comes by! More fun! -LAUNDRY Keep your uniform clean or the Commander will have you clean the reactor with your tongue! -ARMORY The armory has two levels, and this is what you will find: This is the upper level. You can see extra missiles and grenade launchers. There are boxes with explosives and 6 sniper rifles. Lower level, general view. The kitchen can be seen, too. The weapons specialist having a piece of brownie! Is that serious? That container has some of the mines and detectors for the UAV. http://www.mocpages.com/moc.php/361379 Extra blasters, heavy cannons, and land mines. Close up on the mines and detectors for the UAV The elevator to the upper level. The "doomsday weapon". Have you watched the film Beneath the Planet of the Apes? -KITCHEN AND PANTRIES This is the kitchen. The Chef prepares ultra frosted pizzas. Are they healthy? :) The kitchen has two ultra-fast ovens and a tray cleaner. Two sinks and a small BBQ complete the equipment. This is the dry food storage. Bananas, olive oil, water, trays and more trays. Cold storage and freezer. Pizza bases, bananas, Spanish omelettes, carrot cakes and other foodstuffs. The small cupboards keep more brownies.

This is design cooperation between me (bublible) & Yules Click images for FullHD resolution (except that last animated gif, of course )... ...and 3D "overall look": Find out story plot behind this model and even more on set's official webpage: http://lego.queryen....691603.php?j=en You can see it also at MOC Pages here: http://www.moc-pages.com/moc.php/427859 LEGO Ideas direct link for those interested:

Hi guys! It's my first Topic here, on Eurobricks, hope you'd love it(: I called this base "CargoB-808": its name consists of words "Cargo" and "Base". Train have quite a lot of place inside its aim is to transport some sort of ammunition, weapons, usefull little things^^ Some pictures made from the front: The ground floor plays the role of warehouse: Here u can see a jail and and a surgery: And there are a lot of control pannels on the first floor(: One more beautifull photo and thats it!)

Location: E02-Jurin II Tags: Building, Vehicle, Piracy, Spying Job: Explorer After a long vacation, MANTIS had another mission for me. Un-like most of my previous missions, this one involved infiltrating an Octan base and gathering information about a chemical that accelerated plant growth. I was thrilled to find that two of my good friends, Isaac Redsyn and Massi Editoro, were also on the same mission, as well as a MANTIS commo. Isaac was of course assigned to be the driver, which was to be expected. What wasn't expected was the vehicle he would be piloting... An Octan hoverplane. So, you're sure you know how to drive one of these things? Of course I do! I've driven tons of rigs! ... Apparently not enough though. Could you get this thing right side up for once?! I'm trying, I'm trying, but it keeps going every which way! Where are the brakes on this anyways? Hoverplanes don't have br- Massi to helicopter, are you guys ready up there? We might be, if Isaac knew how to drive this... Almost, we're getting into position. Stand by for signal. Roger. In position, proceed with distraction. Yes sir! Here you go little plants, drink up! Go, go go! What was that?! I've got it! Go up, go up! Mission accomplished, good job everyone. Now to take it back to the lab for the scientists to test and analyze. A few more shots of the build: More pictures here: Link It was good to do another AG build, after so many castle builds. C&C welcome!

Click images for FullHD resolution... Direct link: Find out story plot behind this model and even more on set's official webpage: http://lego.queryen....691512.php?j=en You can see it also at MOC Pages here: http://www.mocpages.com/moc.php/411444 LEGO Ideas direct link for those interested: https://ideas.lego.com/projects/131331