Search the Community
Showing results for tags 'Boat'.
Found 139 results
-
In early 2078, several months after the final battle of the Final War triggered massive temporal storms that ravaged the earth, the survivors began to try rebuilding civilization. One such group were survivors of the old North American Union military on the East Coast who founded what would in a few years become the Federal Republic of America, a bastion of hope & freedom in the post-war world. Of course, they soon found themselves beset by enemies on all sides: The authoritarian Grand Duchy of New York and Hordes of Chaos to the north, the fascist, human centric New Confederate States of America to the south, vicious bands of raiders in the arid lands west of the Mississippi and pirates & sea monsters in the Atlantic Ocean to the East. Thus the new nation found itself at war & in need of ways to defend itself because war, war never changes.... One of the earliest efforts by the Federal Republic to defend its coastal waters was the conversion of abandoned cabin cruisers & other boats into ad-hoc patrol boats, one of which was the one that would eventually become the FNS Inferno. After several years (and once the Republic's naval shipbuilding program got off the ground), the Inferno was taken in, stripped down to its bare hull, and rebuilt from the main deck up. The hastily mounted twin .50 caliber machineguns on the front of the vessel were replaced with a 37mm manually-operated light auto-cannon mount and the aft single .50 cal was replaced with a 7.62mm minigun. The overall shape of the superstructure was rebuilt similarly to how the old Higgs PT-boats from World War II were designed, and eventually the forward 37mm cannon was replaced by a DARDO dual-purpose twin auto-cannon turret (this particular choice of armament was heavily influenced by some of the orc technicians who had sought asylum in the Republic, citing "more dakka" as their reasoning for adding such firepower to a vessel of this class). Thus the Inferno Class general purpose patrol craft were born: Captain One-Eyed Willie at the master plot in the crew cabin of the Inferno (yes this is one big Goonies reference): The business end of the Inferno featuring the DARDO 40mm mount & MK 51 heavy sonar guided torpedoes: The Inferno's Brave Crew: Anyways, I was up until 5am last night getting the forward gun mount to look right, and I hope you like it.
-
A very simple technique (hijack/misappropriation of part) with part number 54090 Aircraft Fuselage Curved Forward 8 x 16 Bottom. The concept is super easy, and there are a lot of of people who don't know what to make of their airplane fuselage. They are so big. So there, with 2 parts, you have a boat hull, and in addition the studs are in the right place to put the tiles and plates at an angle, to make the edges. You can construct, boat, dugout, canoe, etc. Boat concept with Part 54090 by Horlack, on Flickr
-
I like to present you my Lego town Steinbruck. The name is from Stein=brick & bruck(old German)=bridge. This is my current layout: My MOC and MOD buildings (more detail pictures in the albums; just click the pictures to get there): I'm planning a car wash for the Service Station and will build it in the next months. I also build digital, but can't afford all of them to build with bricks. Click to album.
-
.thumb.jpeg.019d538e6955d37410627e0d5e3cb08d.jpeg)
[MOC] Airboat with a 2-speed transmission
Parazels posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone! This is my new moc! The airboat is at rest, when the propeller is rotating at low frequency, and begins moving, once the propeller has worked faster. 1 L-motor 2 M-motors Watch the video! https://youtu.be/Tiue-ojVghQ https://youtu.be/pOQoqyriUZY https://www.instagram.com/p/CIavqCVpOoy/?igshid=1lkuooe8kmue6 https://www.instagram.com/p/CIaublcJVqf/?igshid=1clc6dkfsshwd -
Inspired by the small boats in the early scenes of the Lego Ninjago Movie, i made my own little boat, complete with a sail, an oar to push the boat through shallow water and buckets for fish. Ninjago boat (1) Ninjago boat (2) Ninjago boat (3) Ninjago boat (7) Hope you guys like it, leave a comment if you like.
-
Here is my take on a Minifigure Scale Ancient Greek Homeric Galley. A predecessor to the Bireme and the more widely known Trireme, the Homeric Galley was a rowed warship that sailed the Aegean Sea around the 12th century BC. This ship specifically is based off of the Epic Poem The Odyssey and its protagonist, Odysseus' ship. Homeric Galley by Nicholas Goodman, on Flickr Homeric Galley by Nicholas Goodman, on Flickr Homeric Galley by Nicholas Goodman, on Flickr
-
Fishing boat sea boat (work my son - 10 years).
-
Eleonor Boat Restaurant is a typical restaurant built on a river boat. The set includes a small marina and 9 mini figures. Eleonor is a modular LEGO Boat Restaurant. It is designed to be compatible with existing modular LEGO buildings and it is constructed on a 32 x 48 base plate from 1837 pieces. The model is made up from 2 modular levels featuring a cafe/restaurant and a hold with engine room and galley. Level 1 - The restaurant The restaurant has access from the marina crossing a small bridge. On the inside there are the counter and the kitchen, tables for customers and a piano designed to create a romantic atmosphere. The interiors are decorated with many details: table lamps, wall lamps, curtains, the counter with the cash register, the stove, the sink and the piano. At the stern and bow there are two outdoor spaces provided with tables and umbrellas. The roof has a window that enable the light to come from above directly to the dining room and to a little control tower where the boat commands are managed. Level 2 - The galley Below deck is located the restaurant galley, the engine at the stern and in the bow, two camp beds for the cook and the old captain. The galley is full of stocks for the restaurant such as: barrels, crates with fish, crabs and lobsters, barrels of fuel for the engine. Thank you! Thank you for checking out my project and for the support. https://ideas.lego.com/content/project/link/a0285bdc-2989-4960-9687-1efd19e50766
-
RC catamaran boat
9 fingers posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello Technic fans. Now its time to show you my work i made 2 years ago. it is a RC catamaran with 2 RC buggy motors and 1 servo motor for steering. 1 PF m motor is for fake engines. Thanx to Buwizz for briliant solution to make this work so god. some pictures. and the video. thanx for watching. best regards, Valter -
Hello everyone! This is my first post here, and I want to introduce myself with my Spanish Galleon build! (excuse the pirate flag its the only one I have at the moment) The ship itself is more than 2,000 pieces with more than 15 yards of rigging. It has a total of 4 decks, which carry its 24 guns. I have been planning and working on this build for the last 3 months and very happy how it turned out! This is my first large ship I have built, and it comes in around 3 feet long (just the deck) and 2 feet tall, which means its about 1/2 of minifigure scale! I used a combination of different hull techniques that I learn here to give the hull its shape. I have yet to include sails but will be working on that shortly! I have different stages of the build on my Flicker which you can check out here: https://www.flickr.com/photos/183944563@N05/sets/72157712187520373/ Here it is side by side with a official Lego pirate ship! As you can see its more than double the size! Lastly this has recently been posted to Lego Ideas and your support would be greatly appreciated! I think it would look amazing with the upcoming Pirates Bay set coming out later, but also we need to show Lego that fans want the Pirates and other classic themes back on the shelfs! With your support we can bring awareness to this! https://ideas.lego.com/projects/87e933b4-7625-44cf-be1a-fda4369acdd3 Some more pictures!
-
RC Catamaran with the new 42105 set's hulls
Sariel posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Today I've finally had a chance to take the new floating hulls - the first floating hulls in a Technic set,if I'm not mistaken - for a spin on a lake. Here's the footage with a few observations: -
A scene of a Land Rover Defender rescuing a fishing boat from the frozen waters of the Arctic. Bravery or foolishness? Originally an entry built for the "Show Us Your Land Rover In Heroic Moments" contest on LEGO Ideas. (To my luck, it won as a runner-up! ) I suppose the LEGO model speaks for itself, so I'll do away with the descriptions. More images can be found here.
-
Allan's Speed Champion inspired vehicle and building creations.
AllanSmith posted a topic in LEGO Town
Inspired by the Speed Champions cars. Last year I built a car showroom to show them off. Al's Autos is built on 3 large baseplates. On the left baseplate the blue and white sign has doubled sided brick plate writing and rotates on a Technic turntable. The showroom has a roller door entry behind the office on the left. It is fully tiled inside and lit with PF LEDs. On the right baseplate the brown turntable also rotates on a Technic turntable. The footpath is designed to match up to the Modular footpaths. My own creation cars are a Pick Up truck with removable Camper. A Ford GT40 reverse engineered from a LEGO YouTube movie. The black Pontiac is a KITT replica and has a working red LED scanner in the front. Next was a service centre / workshop for the showroom.The back section is a parts department. On the right are two service bays. The front one has a working Technic pneumatic hoist. Also PF LED lighting. The shipping containers can fit a Speed Champions car or spare parts. To keep the cars clean I next built a car wash. This has a working Technic based linear actuator to move the brushes back and forward over the car. So after a long day. It's off to the Drive In movies. The diner has a projection room, kitchen, counter, seating and toilet. My own creation cars are two NYPD police cars with working light bars. A yellow NY taxi. The two Porsche 911's are modified with brick headlights and door handles. The ambulance has working LED light bars, headlights and taillights One day I will get around to doing close up and interior photos. -
Press Release: Creator Expert 10269 Harley-Davidson Fat Boy
Vilhelm22 posted a topic in Special LEGO Themes
I’ve been wondering for a while what on earth Creator Expert 10269 is going to be, and as I could find barely anything about it, I thought this thread would be the way to find out more. 10269 (Vehicle D2C Set) is described on Brickset simply as that, with absolutely nothing else to tell us what it is. Does anybody know anything about it at all, apart from ‘vehicle’ and ‘creator expert’? It could be a train, a car (though unlikely as the Ford Mustang has just been released), a plane, a ship, a shuttle or something completely new. The only thing I can possibly think of is an Emerald Night 10th anniversary rerelease, though I can’t see why they would do that. Please share your thoughts on this set below. UPDATE: LEGO has revealed the Creator Expert vehicles range, 10269 Harley-Davidson Fat Boy! 1023 pieces US $99.99 – CA $139.99 – DE €89.99 – UK £84.99 – FR €94.99 – DK 799DKK – AUS $159.99 AUD Available on the 1st of August, with VIP early access from the 17th of July. Build and display your own Harley-Davidson Fat Boy motorcycle! Explore the finer details of iconic engineering with the LEGO Creator Expert 10269Harley-Davidson Fat Boy motorcycle. Developed in partnership with Harley-Davidson, this highly detailed LEGO motorcycle captures the magic of the real-life machine, from its solid-disc Lakester wheels with beefy tires to its teardrop fuel tank with printed logos and inbuilt speedometer. Other features include a Milwaukee-Eight engine with moving pistons, dual exhaust pipes, handlebar steering, moveable gearshift pedal and brake levers, kickstand and a sturdy display stand. Finished with a dark red and black color scheme, this amazing display model makes a truly iconic centerpiece for the home or office. This advanced LEGO set provides an immersive and rewarding building experience. Features solid-disc Lakester wheels with beefy tires, teardrop fuel tank with Harley-Davidson logos and inbuilt speedometer, Milwaukee-Eight engine with moving pistons, dual exhaust pipes, handlebar steering, moveable gear shift pedal and brake levers, kickstand and a sturdy display stand. Comes with an authentic dark red and black color scheme. This LEGO motorcycle makes an iconic centerpiece for the home or office. Spin the rear tire to see the Milwaukee-Eight engine pistons spring to life. New-for-July-2019 decorated elements include 2 dark red 2x4 tiles printed with the Harley-Davidson Fat Boy tank emblem. Special elements include a new-for-July-2019 rear rim with super-wide tire. Measures over 7” (20 cm) high, 7” (18 cm) wide and 12” (33 cm) long. -
[MOC] Lego ~Technic Camera boat | filming from the surface
896gerard posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Once in a while, every Technic builder wants to build a Lego boat. I was no exception, but there's a lots of boats being built: how to make an original boat then? I decided to not design a good-looking boat, but to make it a tool for filming. This choice asks for a boat that can be quickly placed into its filming position, which means it should be fast and agile. It should also have enough remote control range to film on big water areas. The 1980's Power Functions remote is thus completely out of the question: responds very slow and outside, there's 2 metres of range. We all must thank S-brick for existing. S-brick (or alternatives) makes this boat possible: without sufficient range, there cannot be a camera boat. Many boats have a keel and a rotating propeller at the back. A submerged plane behind the propeller acts as a rudder. Sadly, a rudder becomes less efffective at lower boat speeds and the boat reacts slowly to it: turning the rudder does not mean turning the boat, it first needs speed (and thus space!) to turn. In Dutch ditches (where I wanted to test the boat), there is not a lot of space available for maneuvering. Having a a slow-responding boat with a rudder there means the boat being into the reed all the time. I therefore eliminated the rudder and mounted the propeller on a hinge. Any hinging of the propeller system at any propeller speed the boat causes immediate turning, which is a nice direct response on the steering input. Good theory, but when a single rotating propeller is mounted on the rear, the boat will rotate along its Z-axis. I'm not sure why this happens. It may happen due to the gyroscopic effect of the propeller or due to the Lego propellers not being made for water propulsion, but anyway I had to deal with it. A second propeller placed next to the first propeller that rotates in the opposite direction seems to to the trick. However, when you mount this system on a single hinge, the (larger) system swings out quite far and easiliy hits reed in the typical tight Dutch waters I tested it in. Also, in windy waters, having a single propeller at the rear means the steering is countersteering all the time just to sail straight on! To deal with the problem, I mounted 1 propeller at the front of the boat and one steered propeller at the rear. This means the boat always tracks straight (even when the wind comes in from any side) and that the propellers can be mounted close to the boat, reducing its draft. The boat is made from 2 boat hulls to create a stable camera platform. This concept worked, it gave a lot of control. I decided to use a race buggy motor as it provides a lot of RPM at low torque, excactly what a boat needs. As no additional parts (for looking nice etc) were added, the boat was light, controllable, fast and really fun to use. The steering is a quite unusual setup (for me). It contains a rack with a 24t gear, a PF Servo motor and a ball link system. This setup had the power and speed that was needed for the steering to be quick. The video The GoPro is mounted upside down under the boat. The high speed axle to the front propeller is also visible. For water level footage, the GoPro is mounted starboard-side of the boat. As the boat only weighs 831 grams, this effects the balance a bit.. Sometimes, I used a rearward-facing camera, mounted in a Lego frame and adjustable by a large linear actuator. The same camera, facing to the front. Due to the size of the boat, there are weight restrictions. The boat wouldn't sink with a mounted DSLR camera, but it would not be stable enough when the wind increases. The Sbrick and PF battery box are mounted on the left side to keep a low center of gravity and to restore the balance (the servo is not in the middle). The boat packs some power, which is visible from the wake in the water. Thanks to S-brick the boat never went out of range so it was also a really nice toy. It might have been faster with BuWizz though, but that question might be answered later. I think this boat really makes a case for the race buggy motor. It has good RPM and power for its size and in the water it never runs out of torque (a problem that can occur on land.. ). Hopefully someday somehow it will be made compatible to Powered Up, otherwise this hero will disappear in the shady realms of the past. -
Hello fellow builders, I present you the Flying Dutchman, the infamous ghost ship from the Pirates of the Caribbean film series, in LEGO! The idea came to me a year ago, while I was sitting at my desk when I cast me eyes upon the 3 official LEGO POTC ships on the top of my shelf: The Black Pearl, The Queen Anne's Revenge, and The Silent Mary. For years I had been waiting for LEGO to release a Flying Dutchman, but to no avail it never came out. Determined to build the ship myself, I embarked on an exciting, challenging but rewarding journey to produce a MOC which would take up its rightful place among my fleet and make it complete. More information can be found here at LEGO IDEAS. If you like it, feel free to support! Here are some renders below (more can be found on my Flickr page): LEGO Flying Dutchman - 1 by Scarvia LEGO Flying Dutchman - 2 by Scarvia LEGO Flying Dutchman - 4 by Scarvia And with the crew: LEGO Flying Dutchman - 6 by Scarvia The infamous triple-barrelled chasers in the bow: Triple-barrelled chasers (Out) by Scarvia Triple-barrelled chasers (In) by Scarvia Thank you for your time.
-
Official LEGO set Riverside Boat 31093 (LEGO.com) Riverside Rocket. I tried to keep the same colour scheme and create something Benny would be proud of, so naturally It has lots of engines/ thrusters.
-
Suction jet dredge (ship)
3650tom posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is a suction jet dredge I designed on LDD. I work on one of these things as a mechanic. The movement of the ship is controlled by six anchors, attached to the winches on the front, on both sides and on the back of the ship. It's not fully finished yet. I still need to build the compressor that provides pressure for the suction head. If you got any comments, questions or tips, shoot! :) thanks The two generators and the jet pump: The screening deck: The control room: The suction jet head: Lowering the suction pipe with the winch: Extending the suction pipe with the other winch: The movement of the pipe is controlled by two winches. You can see how the system works on the following screenshots: Lowering the pipe with the upper winch (orange): Extending the pipe with the lower winch (yellow): -
Wild West stern-wheel river-going steamboat (Proud Mary) - real world MOC model
Murdoch17 posted a topic in LEGO Historic Themes
Left a good job in the city Workin' for the man ev'ry night and day And I never lost one minute of sleepin' Worryin' 'bout the way things might have been Big wheel keep on turnin' Proud Mary keep on burnin' Rollin', rollin', rollin' on the river First off: I saw a similar steamboat on LEGO Ideas several years ago and just finally got around to recreating it from the pictures provided. (the project sadly never made it past several hundred votes, it my memory is correct.) I modified it heavily into the version you see here with my own tweaks and twists in the design installed, such as I added a second funnel, revised the placement of said funnels to the front of the ship, and removed the roof off most of the second deck. Oh, and I added three whistles to the top of the pilot's cab like those in set 21317. (Steamboat Willie). Also, my version does NOT have a swing-open right side like the original Ideas model that was my inspiration... thus you cannot get at the inside, and why would you want to? Their is nothing inside at all anyway on my version, save for the blue deck chairs on the top level. The name of the ship is the Proud Mary, after the Creedence Clearwater Revival song of the same name (as quoted above), as I figured it would be appropriate. This model will go with the rest of my Western models, on my Wild West layout. The captain of the Proud Mary is Thaddeus Sweeney, better known as "Old Man Sweet-tooth", for his habit of chewing saltwater taffy when the going gets tough and and giving candy out to the little children whenever he lands at small towns and native american villages such as Lone Tree, Nebraska, or Fort Legoredo, Colorado. He usually plies his brand-new-for-1872 stern-wheel steamboat up and down the Rapid River, with the Missouri River in Iowa at one end, and the the mighty cliff face of Showdown Canyon Springs at the other end in the middle of Colorado. Thaddeus is the only one he trusts to handle his ship, as he says the Rapid River is too treacherous for many newer pilots, as the wrecks that litter the shoreline prove. However, even Captain Sweeney admits from time to time that age is catching up to him, and he has been looking for a suitable first mate for the Proud Mary for some time. -
Hello Eslandolans, before even introducing my main character, I wanted to give a present to all the other factions. For you I have this little boat I built today. Even though I couldn't implement all the techniques and style decisions I had envisioned, because I ran out of the necessary bricks, I'm glad, I worked it out, without having to order new ones. The hull could have been a bit smoother, but I wasn't in the mood to destroy my first ship's long boat. Gladfully the lego football stadium came with a lot of green tiles. So after all these years, it finally was worth it:) The red touch was also a lucky accident, but it fits the coulour scheme well I think. And finally a ship I managed to use the official Lego ropes on. I intended this vessel to be a local fisherman's ship. Honestly, I'm new to these kind of games and therefore don't know, how to do it in the right manner, so you can benefit the best way possible. You as the faction can determine the usage and the best location for this vessel. If there are any problems rule-wise, consider it as a freebuild, that adds more feeling to the world. As for the storytelling part, I'm planning to include it in future posts, tight now, it's just a little raw. Greetings, Wellesley!
-
How to make a waterproof hatch for a LEGO boat?
janssnet posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I'm trying to build a waterproof LEGO (power-) boat using a 54779 Hull. Have already attached the hull to the deck using silicone but haven't found a way to build a hatch on top of the deck in order to: 1. Protect the electronics inside and 2. be able to easily remove the deck to switch the battery inside the boat on and off. Just covering the deck with base-plates is (unfortunately) not enough. Water is still finding a way inside. Putting plastic foil under the base-plates is a mess. The remaining option (so far) is to make a silicone mold which then works as a rubber strip between the deck and the baseplates to stop the water from going under the baseplates. Definitely not a method with guaranteed success. Anybody any tips? https://drive.google.com/file/d/168JsCBVT6ALASfuV-NYymiWoyGaMogaN/view?usp=sharing -
After seeking out the Olean consul, Montoya now had to find conveyance back to King's Harbour and had made his way to the Jameston docks, where he had found a midshipman of a Royal Navy vessel. "Aye sir, we're off a brig lying in the roads, which will be going west as soon as we've watered and resupplied" the midshipman reported. "And unless new orders have arrived, we are indeed heading for King's Harbour" Turning to a sailor, he barked: "Take care with those barrels, Johnson - we don't want them spilling good rum now, do we?" and back to Montoya: "Beggin' yer pardon, sir. Requirements of the service and all that... We can find room for you, your assistant and limited dunnage in the boat. I am sure the capt'n 'll accommodate you shipboard, sir." "Just be back here this at 2 this afternoon, and I'll take you out" __________________________________________________________ Overall shot of the build. I think this warehouse/dock will be licensed as a commerce in Jameston, while I might license the boat as a class 1. C&C is, as always, welcome.
-
Old Fishing Store – Modular creator Building The Story My story for this modular building was that the Old Fishing Store is based upon a Sea Front village Theme. I liked the old Fishing villages so I built this one on Lego Digital Designer (LDD). I really believe that this model could have a lot of genuine interest to fans of Modular an creator sets. This is the first of a series of modular creator buildings that I will be making. Summary The building consists of roughly 2160 parts and three floors: the main store, office, and lookout. I used the colors brown and sand green that gives it a realistic feeling. Four Mini-figures could be added such as a two fisherman, the store keeper, one captain. And a lot of details. It includes: Mini fish, crab, flicking hook, starfish, snow owl, sea gulls Barrels, I subited this MOC also by Lego Ideas. https://ideas.lego.com/projects/124448
-
The HMS Endeavour/Dauntless from the official Lego Pirates Of The Caribbean game. I tried to make it look as much like the game model. Took around 40 hours to build including playing the Port Royal level over and over. Modular decks for easy disassembly. Doesn't have an interior yet. Any suggestions? And when I try to import it from stud.io it says 0 parts on my baseplate and wanted list (see pictures). Want to buy the parts via bricklink. Cant upload pictures due to size limit of 0.1MB.
-
Air-boat moc which was fun to build with just a few pieces. video of more detail review:
.thumb.jpg.12bd2d2b6e1a1076036045cb450d54f0.jpg){kind=avatar}
