Search the Community
Showing results for tags 'fendt'.
Found 4 results
Nightfall posted a topic in LEGO TownI like to present you my Lego town Steinbruck. The name is from Stein=brick & bruck(old German)=bridge. This is my current layout: My MOC and MOD buildings (more detail pictures in the albums; just click the pictures to get there): I'm planning a car wash for the Service Station and will build it in the next months. I also build digital, but can't afford all of them to build with bricks. Click to album.
nick97 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingHello everybody, It's been a while since I posted (and read) something, but this topic will change that. The last years I've been busy with school, found a great job, just recently finished school and some time ago I moved to my own place. Between all that I did have had some time to work on some lego projects, but lacked time to show them here. So this topic will show what I have been working on. I want to start with saying thank you to @Sariel for sharing the instructions for his Mustang. I build this great car and really like it. And the chassis wil be a base for future cars. So here is my version, in white with blue stripes. As you can see it isn't finished yet, I still need some missing parts. Next is a smaller model. Some of you might remember I build a small version of a Claas Xerion, in black. Some time ago I transformed it into an octopus. That's an Xerion with four mowing arms, to mow a ditch in one pass. It isn't the best looking thing I've build, but it looks good enough to me. Another small model I think I haven't shared is a model of a Challenger. It's a tracked tractor in approximately the same size as my Xerion. Then I have two projects, which probably get their own topic in the future. The first is a model of a Hardi Commander sprayer with a Fendt Xylon, both scaled 1:16. The sprayer features working boom (pneumatic/mechanic) and steering (mechanic). The axle is also suspended. The Fendt features steering, suspension, lights, rear hitch and pto. The pto is driving the mechanic part of the boom, pneumatics still by hand and steering the sprayer using hog. The sprayer in the next picture is already version 2. This one is completely rebuild en beter than the first one. Next is a complete rebuild of the tractor, to match with the functions of the sprayer. The second project I'm working on for at least more the two years now is a scaled model of a Herder One. This is a self propelled ditch cleaner/mower. It has drive and steering on both axles, including three steering modes (front, all and crab), all controlled using S-Brick. S-brick also controls turning the arm. A second S-Brick is used for controlling lights. The pneumatic functions in the arm are controlled manually (controls under the hood) and a motor powers the pneumatic pump. The current version shown in the next pictures features a suspended front axle, just like the real machine. I also started building a second version of the Herder One. Thanks to the planetary hubs I can make better/stronger axles. This version also won't have suspension, as it takes to much space. Now the servo used for steering the front axle fits above the axle, which leaves more space in the middle of the chassis. See bricksave for a few more pictures of these projects: https://bricksafe.com/pages/nick97 This is it for now, please leave your comments/questions/tips. Kind regards, nick97
eric trax posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingOnly one model today :D For a long time I wanted to build a classic agricultural trailer. It was supposed to be a standard double axle version. However, when I built the New Holland and Fendt tractors, I changed my mind and decided to build a tandem trailer. I made such a decision for a simple reason. The only output that can be controlled in tractors is the PTO shaft. This version of the trailer does not have to have a pneumatic system or engine to raise the kiper. In addition, the model had to be in a popular color because I wanted to create an instruction for it. The choice fell on Krampe Big Body 550. Trailer frame The frame is a fairly simple liftarm structure. The first version had a pendular suspension, but I had to remove it because the loaded trailer was unstable. Thanks to this, I could additionally strengthen the frame and move the cylinder towards the hitch in order to increase the load capacity. At the moment, it is about 1 kilogram Tipper I wanted to build a realistic model. Because of that I had to give up technic panels. If I used them, the tipper would weigh 1/3 of its current weight. Bricks are heavy, so the payload has dropped. The model looks very good like model–team one. I am glad that I managed to reproduce the curvature of the sides. The tailgate lifts automatically when the tipper is lifting. The trailer has a system of pull rods that lift it up. If the tractor has a pneumatic system, it can be replace by lego pnaumatic cylinders as a separate function Thanks for reading! Build instructions can be found here: https://rebrickable.com/mocs/MOC-26566/M_longer/krampe-550-tipper-trailer/ VIDEO:
Mit dem FENDT VARIO 1050 starte ich mal eine/meine kleine Landwirtschaftsreihe. Da LEGO nicht wirklich das Thema Bauernhof bedient, muss man halt selbst ran. Der "reine" Minifig-Maßstab lässt allerdings wenig Raum für Details und auch technische Lösungen wie Front- oder auch Heckhydraulik. Die hab ich allerdings geggenüber dem gezeigten Modell bereits wieder weiter verfeinert (mit Kranhaken und einem vorne und hinten passenden Aufhängemodul hab ich eine bespielbare Variante gefunden). Größenmäßig orientiert hab ich mich an den SIKU 1:32-Modellen, das sind gute Modellvorlagen. Wenn man die Haustüren des Minifig-Maßstabes mit zwei Meter Höhe ansetzt, erreicht das Modell genau die doppelte Höhe, also vier Meter (was auch dem Original entspricht). LEGO FENDT 1050 Vario Here is my first agriculture model: FENDT VARIO 1050. LEGO doesn´t present farm models, so i try to build them for myself. The minifig-scale is realy to small to install all the details and technical features, for example: front and rear hydraulics. The scale is nearly 1:32 like SIKU models. Great pattern for building with LEGO. If you take a LEGO door for two meters, this model is twice. The original is nearly four meters high. So it matches. (hope, you understand)