Search the Community
Showing results for tags '10269'.
Found 2 results
Creator Expert Harley-Davidson Thanks to Lego and EB for this review set - it's a new entry in the line of Creator licensed vehicles (Mini, VW Beetle, Mustang, etc) and I was excited to check it out. I've admired those sets but never owned any of them. More importantly, when it comes to this HD set, I had not seen any images online or had any ideas about it before it arrived - I literally only knew that it was a Harley in the Creator Expert line. Name: Harley-Davidson Set Number: 10269 Pieces: 1023 Price: unknown as of review date (July 9, 2019) but I'm guessing $100-ish (edit: confirmed to be $99.99 US, $139.99 CAD, 84.99 GBP) Minifigs: 0 Theme: Creator Expert The Box Front When I opened the shipping box and got my first look at this set, I couldn't do anything but think WOW. At a glance, this set could easily pass for a model rather than a Lego set. There's so much detail packed into this and it just looks right. The Real Thing Before we move on, here's the real 2019 Harley-Davidson Fat Boy from their online gallery. Like I said, Lego appears to have nailed the design. The dual exhausts with their taper in the middle... the solid wheels... and of course the V of the engine. (and oddly, the photo Lego used inside the manual of the real bike isn't in the "Wicked Red" color. It's "Industrial Grey Denim" instead which looks too bland on the page IMHO.) The Box Back Wait a minute - this thing has functional pistons like a Technic set? I like! And it looks good from this side too. It feels a little more Lego-ish from this side for some reason, but it's still very good looking. The Scale This will be a pretty good-sized model. It's over a foot long. And apparently they liked the 107 logo for the 1:1 image, but were afraid people couldn't put that in context, so they added the engine as well. The New Parts The only new molds that I saw are for the wheels. The front tire is the existing "Racing Tread" motorcycle tire that's been used since 2010 in Technic, Hero Factory, and Ninjago sets. The wide rear tire is new though, as are the solid wheels. And in a clever design to save on mold costs, the read tire just uses 2 of the rims instead of needing another custom part. Molds are expensive, especially for large parts like these, and since these rims are such an iconic trademark of the Fat Boy bike, I suspect Lego won't be allowed to reuse them elsewhere. It is a bit of a cheat though. The real bike doesn't have a rear tire twice as wide as the front (they're 160mm wide fronts and 240mm wide rears), and the real rear rim has a deeper recess. The Age Designing a set takes a long time. Both new molds are copyrighted 2018, even though the set isn't being released until mid-2019. The Stickers The set has some printed pieces and one small sticker sheet. It's a very chrome sheet so that the "mirror" circles are reflective. The rest of the stickers have the usual Lego hidden meanings in them. 107 is the engine size (and really printed on the real bikes). WGDLN1990 stands for Willie G Davidson and Louie Netz, who designed the Fat Boy in 1990. 41 is the highway number that runs through Milwaukee, WI, where HD is headquartered. The 1974 on the odometer is the year that Bill Davis started designing the softail style frame. (thanks to the friendly people over at /r/harley for the help getting my facts right on these!) The Build, part 1 The parts for this set come in bags numbered 1-4. Stage 1 begins with building this frame that will become the bottom of the bike. They're already using some "advanced" build techniques - that black perpendicular connector (which, believe it or not, is a new color for that part!) is not connected to an axle like it's designed for. It's connected onto an arm so that it can swing outwards to become the kickstand. The Build, part 2 I'm not doing a ton of build photos - this set is a joy to assemble and I don't want to spoil too much. The build process is very modular. There's surprisingly little building directly onto the bike. It's mostly assembling a module and then attaching it as a chunk. Here is the engine. I paused partway through to show that yes, there are pistons inside there and they really do move. It's a fun piece of building, even though it's hidden completely in the finished model. The Build, part 3 At the end of bag 1 the finished engine mounts onto the frame. Thankfully, the two stickered discs are mounted onto pins, so they can be rotated freely to be level. There are also interesting part choices that make little sense. You can see the ends of blue 3L pins there. Below them are grey 3L pin with 1L axles... but why? There was no need. There are some locations where they chose the ones with axles because they didn't want blue showing, but there are other places where there was no need for the axle version. The set also has the 2 stud Technic axles in both red and black. There's nowhere that the red is needed visually. The Build, part 4 When you reach the end of bag 2, it now looks much more like a motorcycle. Perhaps the one tedious part of the build is connecting those 43 chain links. And then you have to feed them through the frame and around the gears. I found picking the whole thing up in the air and letting gravity do most of the work was the easiest method. Again though, there's a few odd part choices. I wonder if they are trying to model something on the real bike that isn't visible - for example, there is a spot on the side that uses a 1x1x1 corner panel that is completely hidden. It's the only one of that part in the whole set, and it could easily have been replaced by a standard 1x1 brick (which are already in the set) with no visible change. Likewise, the set has a couple white Technic 2/3L Pin Connectors, but they're buried inside. It already uses black and light grey ones, so why complicate the production process that way? The Build, part 5 At the end of bag 3, a lot more of the detail has been added. Be careful putting on the speedometer sticker - its disc is attached to an axle, so the angle is fixed. Mine will now forever be slightly crooked.... Also of note is the dark red of the gas tank. In real life it doesn't look as unevenly colored as this photo. The actual color is close, but the curved pieces are glossy while the slope in the middle is a matte texture. That difference stands out in certain lighting. The exhausts have a great part usage - they use aircraft engines to form both the taper between sizes and an attachment point to the body of the bike. On the other hand, you can see the most annoying piece of the set in this photo. Just behind the engine, there's a black cone with a 1x1 round grey tile on top (it represents the suspension adjustment knob on the real bike). I find that's right where my thumb hits when I pick the bike up from above, so I've knocked that cone off so many times making this review. And once the second exhaust pipe is in the way, it's a bit of pain to reinstall. The Build, part 6 And it's complete. Bag 4 adds the second exhaust and the front wheel and fork assembly (and a simple grey stand). I personally think the front fork is the one area that feels badly out of proportion. The real bike is beefy there, but not quite this thick. Unfortunately, Lego doesn't have any 1.5x1.5 round parts. I also think the front fender is a little too short. The Front IMHO, this is the weakest angle on the set. Granted, the headlight/fork/handlebar assembly is complex and difficult to recreate, but I still think the headlight is too big and the forks too thick. I wonder if a 3x3 dish would have made a better headlight. I'm betting they went with the 4x4 though because there's no 3x3 plate to put behind the dish. I do appreciate that the handlebars attach with clips, so they're simple to pop back off if you need to store the set in a box. The Comparison Here is the Harley next to 2010's Technic 8051 set (which uses the same tires as 10269's front tire, so it's theoretically around the same scale). I built it as the B model which is closer in proportions to the Fat Boy. 8051 was a $40 set with 467 pieces, and the B model uses only about 350 parts. You can clearly see what a difference 1000 vs 350 parts makes! The Big Brother I stopped by a large Harley Davidson dealer to get their thoughts. The staff there were blown away by how good the set looked and were amazed that it actually had functional pistons and chain drive (even though the real bike is a belt drive). They couldn't point out anything that looked wrong - sure, there's minor details (no side reflectors on the front fork or at the rear, the shallow dish of the rear wheel, etc) but overall they loved it. The number of little details are what caught their attention. For a small model, it has lights, hand controls, shift and brake pedals, etc. The Size Comparison The Lego set fits nicely on the footrest of a real 2019 Fat Boy. It does show the one visual drawback to the Lego version - its not all chromed . How long until we see some custom chromed versions showing up? I think they'd look fantastic! The End This is a well-designed set and truly a joy to build. I LOVED the build process on this. It blends Technic and System magnificently both visually and in build techniques. Mike Psiaki had a tough challenge, translating the angles and curves of a modern motorcycle into Lego, but he met it. Even the staff at an HD dealer said they were looking forward to picking the set up! If you don't have around twenty thousand bucks to drop on the real thing, get the Lego version for about half a percent of the price.
Vilhelm22 posted a topic in Special LEGO ThemesI’ve been wondering for a while what on earth Creator Expert 10269 is going to be, and as I could find barely anything about it, I thought this thread would be the way to find out more. 10269 (Vehicle D2C Set) is described on Brickset simply as that, with absolutely nothing else to tell us what it is. Does anybody know anything about it at all, apart from ‘vehicle’ and ‘creator expert’? It could be a train, a car (though unlikely as the Ford Mustang has just been released), a plane, a ship, a shuttle or something completely new. The only thing I can possibly think of is an Emerald Night 10th anniversary rerelease, though I can’t see why they would do that. Please share your thoughts on this set below. UPDATE: LEGO has revealed the Creator Expert vehicles range, 10269 Harley-Davidson Fat Boy! 1023 pieces US $99.99 – CA $139.99 – DE €89.99 – UK £84.99 – FR €94.99 – DK 799DKK – AUS $159.99 AUD Available on the 1st of August, with VIP early access from the 17th of July. Build and display your own Harley-Davidson Fat Boy motorcycle! Explore the finer details of iconic engineering with the LEGO Creator Expert 10269Harley-Davidson Fat Boy motorcycle. Developed in partnership with Harley-Davidson, this highly detailed LEGO motorcycle captures the magic of the real-life machine, from its solid-disc Lakester wheels with beefy tires to its teardrop fuel tank with printed logos and inbuilt speedometer. Other features include a Milwaukee-Eight engine with moving pistons, dual exhaust pipes, handlebar steering, moveable gearshift pedal and brake levers, kickstand and a sturdy display stand. Finished with a dark red and black color scheme, this amazing display model makes a truly iconic centerpiece for the home or office. This advanced LEGO set provides an immersive and rewarding building experience. Features solid-disc Lakester wheels with beefy tires, teardrop fuel tank with Harley-Davidson logos and inbuilt speedometer, Milwaukee-Eight engine with moving pistons, dual exhaust pipes, handlebar steering, moveable gear shift pedal and brake levers, kickstand and a sturdy display stand. Comes with an authentic dark red and black color scheme. This LEGO motorcycle makes an iconic centerpiece for the home or office. Spin the rear tire to see the Milwaukee-Eight engine pistons spring to life. New-for-July-2019 decorated elements include 2 dark red 2x4 tiles printed with the Harley-Davidson Fat Boy tank emblem. Special elements include a new-for-July-2019 rear rim with super-wide tire. Measures over 7” (20 cm) high, 7” (18 cm) wide and 12” (33 cm) long.