Search the Community
Showing results for tags 'truck'.
Found 657 results
-
[MOC] URAL 4320 Trial Truck
Teo LEGO Technic posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey everyone! First of all Happy New Year to everybody! Here's my last MOC of 2019, a URAL 4320 4x4 Trial Truck. It features: -working steering with servo motor and adjustable working steering wheel -4x4 drive with 2 differentials powered by 2 x power functions XL motors, and fed by 2 x 2.0 pf receivers and 2 x lithium battery boxes -opening doors -working lights A couple pictures of the model, more on here: https://www.bricksafe.com/pages/Teo_LEGO_Technic/ural-truck My main goal with this project was to make a robust trial truck with tons of ground clearance and tons of torque and solid steering, while not having anything be at risk of breaking. For this reason I have an XL on each axle, as a 5 x 7 frame with a differential can hold the full torque of one XL without damage to the gears. Extra torque was achieved by using the Unimog portal axles. The truck can stand Sariel's wall test, i.e. when the wheels lock up on a grippy terrain no gears break anywhere. The steering is also precise, with no intermediate gears between the servo motor and the rack and pinion system. It too can handle the full power of the servo without any danger of breakage. The suspension too is robust and meant to operate as smoothly as possible. Putting the battery boxes low down on the sides helps it be as difficult to topple over as possible, bearing in mind how high it is off the ground. My secondary goal was to emulate the rugged look of Ural trucks, which only look as good as they should when every little curve and angle is modelled like the real thing. This includes the curvature of the front grill, the form of the bonnet, the angled headlight frames, and the subtly angles and tilted front windshield. I'm fairly satisfied with the result, and overall it's a truck I'm pretty happy with. Nothing super fancy, no gearbox, just a solid chassis and a good-looking body. Hope you guys enjoyed it!! -
[ MOC ] TESLA CyberTruck
cyberdyne systems posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, everyone! I was so impressed by Elon Musk's presentation of Tesla's brand new pickup, that I immediately have made a Lego recreation of CyberTruck! Here it is: It is full RC. 2XL for driving and a lot of other motors for functions. These propellers were the only possibilty to make smth like the original hexagonal wheelcaps. Interrior is filled with wires, but I tried to recreate some important parts like: -Big screen -Foldable third front seat -White dashboard -Wierd steering wheel Tailgate is made out of two parts. One tilts back down and another slides down for a Tesla Quad to get inside easier. Suspention is ajustable via 2L motors one for each axle. All doors can be opened with a help of a big amount of levers and gearworms. Video is here and I recommend you to watch it: Thanks for watching! -
[MOC] Dual-Driveshaft Pickup
KevinMoo posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
If you still remember the Mitsubishi Pajero that I posted about 6 months ago, you will know that there is another 4x4 MOC with similar drivetrain which I haven’t published yet. Well, the model was actually finished long ago, but the video was long overdue for some reasons. Now, finally, presenting my latest MOC: Dual-Driveshaft Pickup. Dimensions: 350 mm (L) x 150 mm (W) x 165 mm (H) Weight: 1237 g Parts count: 1660 pcs Outdoor test video (4K): The main feature of this MOC is obviously the driveshaft, so how does it work? Instead of presenting photos and explaining with lines of words, this time I made a short video to tell you all about it. This is my first time doing voiceover, as we don’t speak English in China at all, please bear with me for my accent and grammar: I’m not sure if I made myself clear enough in this video, so feel free to leave a comment. more photos: Lastly, I’ve already created building instructions, it will be available very soon. Hope you like it and stay tuned! -
[MOC] Dacoma 4x4 Redux
Madoca 1977 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello everyone! Thanks to the purple Titanian, it took 18 months for coming back from yet another dark age in my life. Now I am here with yet another pickup truck. Design was inspired by Ford Raptor, Dodge Ram and GMC Sierra. Dacoma 4x4 Redux Weight: 1360g -Powered by Sbrick -2 L motors for propulsion -Servo motor for steering -M motor for two speed gearbox, (sort of) limited-slip center differential and lockable rear differential -LED for headlights -Openable hood,doors and tailgate Video: https://www.youtube.com/watch?v=qMUH1YmF1F4&t=1s This is an improved version of my Dacoma pickup truck and TLC 80. I could not finish building instructions for them because they had fatal drawbacks on their drivetrain. In low gear, bevel gears in center differential often skip and pop out by the torque of propulsion motors. To make it reliable, it was necessary to reduce the stress on center diff while handling higher torque in low gear. The gearbox works sequentially. (1 - 2 - 3 - 2 - 1) 1: High - 2: Low - 3: Low with rear diff lock In low gear, center diff works like limited-slip diff. In high gear, two L motors are coupled and rotate center differential together. Front and rear axles are driven via open center diff. In low gear, only one L motor rotates center diff. Another motor is connected only to rear axle. (In other words, it just supports rear half of drivetrain.) Which means rear half of axle in center diff is (nearly) locked. That means front half of axle in center diff is locked as well. Maximum suspension travel is not as long as older Dacoma truck. But new one articulates better thanks to softer front suspension. Years ago I happened to get some rare blue parts from old sets. So I could build it in blue. With a few tweaks, it can be built in white, orange or black. Building instructions: https://rebrickable.com/mocs/MOC-25520/Madoca1977/dacoma-4x4-redux/#comments I hope you will like it. And I will work hard not to take a long time for sharing next model. -
I tried to build a transformer vehicle which doesn't include 1x1 handles (26047), 1x1 clips (15712) and 1x1 brackets (36840, 36841)this time. This LEGO MOC contains 19 LEGO lots and 48 total LEGO parts. Transformation stop motion animation : 00:41
-
In long time built something. Not for real, this is digital build. Something like Unimog 13xx firefighting truck. Frond doors should be openable, maybe also front hood. Rear compartment also is accessible. hopefully right forum section.
-
Allan's Speed Champion inspired vehicle and building creations.
AllanSmith posted a topic in LEGO Town
Inspired by the Speed Champions cars. Last year I built a car showroom to show them off. Al's Autos is built on 3 large baseplates. On the left baseplate the blue and white sign has doubled sided brick plate writing and rotates on a Technic turntable. The showroom has a roller door entry behind the office on the left. It is fully tiled inside and lit with PF LEDs. On the right baseplate the brown turntable also rotates on a Technic turntable. The footpath is designed to match up to the Modular footpaths. My own creation cars are a Pick Up truck with removable Camper. A Ford GT40 reverse engineered from a LEGO YouTube movie. The black Pontiac is a KITT replica and has a working red LED scanner in the front. Next was a service centre / workshop for the showroom.The back section is a parts department. On the right are two service bays. The front one has a working Technic pneumatic hoist. Also PF LED lighting. The shipping containers can fit a Speed Champions car or spare parts. To keep the cars clean I next built a car wash. This has a working Technic based linear actuator to move the brushes back and forward over the car. So after a long day. It's off to the Drive In movies. The diner has a projection room, kitchen, counter, seating and toilet. My own creation cars are two NYPD police cars with working light bars. A yellow NY taxi. The two Porsche 911's are modified with brick headlights and door handles. The ambulance has working LED light bars, headlights and taillights One day I will get around to doing close up and interior photos. -
This is a prior version of the Greek National Highway Road with a single middle partition
-
Hello this is my first Truck moc a Tatra Phönix Euro 6 8x8 It has 8x8 drive with a 3 speed linear gearbox which is driven by 2XL Motors ,shiffting via 1M Motor. Steering over a Servo. Dumping via 1L Motor. It has independent suspension on all wheels. The cab is also tiltable. The driving performance is not that great when steering. It can drive over bumps but the model is quite heavy. Some ares a not 100% final like the cabin interior and the dump. Turning radius is terrebil and takes forever. Please let me know your thoughts. .
-
MOC#37 Isuzu NPR Light Duty Truck Isuzu NPR is a very popular truck in many countries. The cabin doors, back doors and lift gate can be functioned. My other MOC models: [MOC] Halloween Pumpkin Horse Carriage [MOC] ISUZU NPR Light Duty Truck [MOC] Karsan Jest Mini-Bus [MOC] Ford F150 XLT [MOC] London Double Decker Bus Dennis Enviro 400 [MOC] Lada VAZ-2105 [MOC] Subaru WRX [MOC] Classic Cadillac Convertible [MOC] Toyota 6th Gen. HiAce Van [MOC] James Bond Aston Martin DB5 [MOC] Toytoa HiAce van [MOC] Toyota GT86 [MOC] Office Desk [MOC] Ferrari F355 [MOC] Toyota AE86 Coupe (2018 version) in Initial D Animation [MOC] Police Motorcycle #2 [MOC] Sport Bike Stop Motion Speed Build [MOC] New York City Police (NYPD) Car [MOC] Lego Mini Cooper [MOC] Japan Tokyo Taxi vol.1 東京無線タクシー [MOC] Ice Cream Truck [MOC] LEGO California Highway Patrol [MOC] LEGO Police Car [MOC] Police Motorcycle [MOC] New York City Taxi / Cab [MOC] LEGO NYC News Stand [MOC] New York City Transit Bus [MOC] Newspaper Rack [MOC] Coke/Beverage Cooler Initial D AE86 Racer AC Transit Bus AC Transit Bus Short Version Ice Cream Van
-
Let me introduce my latest build: Truck with concrete pump Introduction I got the inspiration for this kind of truck very long ago from this spectacular build from Waler: http://www.brickshelf.com/cgi-bin/gallery.cgi?f=558238 . It was one of the first builds I saw when my dark age ended and I kept returning to it ever since. I knew I had to build my own when the time is right. I tried it once already (not published) in smaller scale 3 years ago but I wasn't skilled enough, the scale was wrong and I lacked the parts. I hope it is better this time. I also knew that I want to build it with very different features, Waller's truck if fully RC and I have found out that I prefer single motor and gearbox and steering and drive. IMGP5397 Features & build The list of features I wanted to implement were clear from the begining - full suspension, one motor for 6 functions, 3-section pneumatic arm, gearbox with two way switches and modular build. I wanted similar build/experience like Arocs so I have borrowed few features from it, most important is the way how the 3 modules (front axles with cabin and "crane", central gearbox, rear axles) are connected together. So I took the size of the gear box and its attachment points from Arocs and made my own one within the limits. Later I had to drop the 6th output that was supposed to drive some sort of lever ("pump") inside of the hopper because of complexity. The first iteration of the gearbox was quite fine, but it struggled when the long outriggers were hood on it because I have used clutch gear before the whole gearbox. That was major flaw so I had rebuild it again (almost) from scratch and even managed to add second penumatic pump to it. Each function is proteced either by white clutch gear, rubber band or LA clutch. The gearbox is powered by one L-motor which is powerfull enough to drive everything. Concrete pump gearbox There are two switches on either side between the axles, on right there is switch for spreading outriggers and extending front ones, on left there is switch for lowering them and for pneumatic pump. Switch for arm rotation is under the turntable. The X-style outriggeres are as close to each other as possible. The problem is that the gears for the 4 mLA that spread outriggers have to turn in opposite direction on left/right side AND in opposite direction on front/rear side as well. You can probably see more from picture above. IMGP5404 IMGP5401 Rear axles are build in similar way like on arocs, the difference is that the springs are serured much better and there is build-in 1:3 reduction. Front axles are live axles with ackerman geometry and different steering angle. I'm really happy how they turned out, the spring is mounted to lower suspension arm so I was left with more space on chasis. The steering angle is very high at the cost of force required to steer. It is necessary to drive by one hand and steer by other one, the model is very heavy and steering at place is not very convenient. Rear axles are connected to V8 engine under the cabin. IMGP5414 The cabin can tilt to reveal engine. there are two seats (of course in blue), dahsboard, gear stick and two pedals inside. I have also added screen wipers and all mirrors. Arm is 3 sections. This was real science to make it as long as possible and light so the pistons can lift it. I have moved the pistons that operate 2nd and third section to opposite direction of the arm. This prooved very effective as it allowed me to make both sections at least 10 studs longer. I also wanted tubbing as nice as possible and thick tube for concrete as well. IMGP5406 IMGP5409 Full gallery: https://flic.kr/s/aHskUypnbW Video Instructions Yea, they are on the way -
Armored Mercenary Van A while ago i was surfing through the Internet and was kinda curios what other Brick / Clone Brands have to offer. My Eyes fell on an interesting looking SWAT Van from the Clone Brand Enlighten. I really liked the overall Design of the Vehicle and so i started searching for better Pictures to pull off a daring Move: Cloning a Clone Brand Set :D Of course without actual Instructions i only could guess what`s underneath but i think i did a pretty neat Job.I added some Details here and there like Clips in the rear Compartment that hold two Guns and a working Driveshaft / Rear Axle with Technic Pieces. Towards the End of the build i noticed that i don`t have 3 black Roof Plates so i used one with a cool looking Sticker. So now it`s a Lego Mercenary Truck completely made from danish Bricks that are compatible to most Clone Brands :D 20170515_130533 20170515_130601 20170515_130615 20170515_130634 20170515_130656 20170515_130714 20170515_130825 20170515_130837 20170515_131048 20170515_130853 So,how do you like my Version?
-
Hello everybody! After a long interruption I would like to show a MOC again. It is the MAZ-7305 with Emmets ULSDC-Container. ULSDC stands for Ultra Large Single Decker Couch. The designation has nothing to do with a real existing model of the Minsky Avtomobilny Savod, but is based on the designation system of Soviet motor vehicles. The 7 stands for a maximum permissible total weight of over 40t and the 3 identifies the vehicle as a truck. The 05 indicates that it is the 5th vehicle of this type. The story After the peace treaty with the Systar universe averted the final disappearance into the box of forgetfulness, Emmet wants to return to his beloved normality as soon as possible. He has rebuilt his dream house in the neighbourhood of Benny's Spaceship Dockyard as a semi-detached house in the hope that he can move in with Lucy right next to Batman and Queen Watevra Wa'Nabi. But Lucy draws it out of Apocalypseburg into Wasteland - she wants to explore what is left of Bricksburg. After Emmet realized that he can't keep Wildstyle at home, but he doesn't want to leave the comfort zone himself, he decided to build an expedition car for Lucy together with Benny, the engineer, Nya and Sweet Mayhem. It should offer at least 4 Minifig comfortably space, be equipped with the most important things for a self-sufficient life and offer the possibility to recover and transport even larger findings of interest. MAZ-7305 with Emmets ULSDC-Container - Story Description The yellow ULSDCC is the Ultra Large Single Decker Couch Container specially designed by Emmet for Lucy. The container is equipped with the most important things for a self-sufficient life next to the couch. It should remind Lucy of Emmets dream house with its design and colour. There is a coffee machine for overpriced coffee, a TV, a fridge filled with ice licks and a toilet. In front of the large panorama windows there are a few flower boxes so that the view of Wasteland becomes friendlier. Inspired by the pop-up party bus is the party tower on the roof with disco sound and lighting system as well as streaming satellite dish. The sound system is fed by the turntables, which Lenny serves with dedication. Of course Benny wanted to place a spaceship somewhere. Therefore a small landing platform is mounted at the rear of the ULSDCC. MAZ-7305 - departure to wasteland Equipment container In front of the ULSDCC there is a red container with hinged side walls for the transport of all equipment absolutely necessary for the journey like Lucy's instruments, soft drinks, snacks, garden armchairs, etc. MAZ-7305 - equipment container The Camp For longer stays, the ULSDCC is placed on the yellow supports and the red container. This creates a kind of tower, which offers a certain protection against wild animals and a wonderful view. The container roof serves as sun deck or occasionally as stage for concerts and the place below is a sun protected chill out area. MAZ-7305 - The Camp MAZ-7305 - The truck The MAZ-7305 as carrier vehicle originates from the Minifig Automobile Centre and is a robust construction from the 1960s, developed for the rough use in the Eurobrick tundra. MAZ-7305 - The truck The vehicle was converted into a pole truck using simple American oilfield technology. MAZ-7305 - pole truck The skid (the grey platform) serves to transport the containers or large finds and can be loaded with the winch itself. MAZ-7305 - bed truck - loading a skid Participants of the expedition are Lucy, the engineer, Nya und Lenny. The ULSDCC - Ultra Large Single Decker Couch Container Concert in the wasteland MAZ-7305 - concert in the wasteland So far so good, more photos are available as always on flickr and I remain curious what you say about itKind regards Mario
-
[MOC] Indominus Mark III
SilenWin posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everyone! I'm glad to present you the third version of my trial truck with a long prehistory and a slightly unusual design Lego Indominus Mk3 by Alexey Tikhvinsky, on Flickr Some history now: In the far-distant 2015 @Lucio Switch has built a titanic airfield firetruck that made a strong impression on me. The stunning set of functions, motorization, scale and appearance of this monster inspired me to build a modification. Searching for parts and construction took about a year. I wanted to not just change the color scheme or somehow improve already perfect truck - I wanted a total rework of the entire transmission, body and concept in general As a result, we got a truck with a loud name "Indominus Rex" and a claim to conquer the off-road. The 4 most powerful motors (5292) produced by Lego ever, differentials with limited slip (thanks @efferman for idea), planetary gear reduction in each of the eight wheels - all this allowed to overcome quite serious obstacles, even with weight of the model (6 kilograms) and dimensions (92x25x25 centimeters). Modification, judging by the opinions of AFOLs and the victory at the MOCs exhibition in Moscow Megabricks museum, turned out quite good. The flatbed body, a thin (3 pins) frame, a relief roof with air intakes and off-road rubber did their work - the truck moved away from the original as much as possible with the help of some solutions and design features. In the same 2016, in a New Year eve, I made another modification of the ACT truck. Indominus-2 was created specifically to participate in the winter truck trail competition in Moscow. No differentials, reduced weight (3.5 kilograms) with the same dimensions. Design was primitive, while preserving the common features of the original "front end". No serious ambition in the construction of this truck, it was initially clear that with its dimensions, it will not pass the road for off-road trucks. As a result, of course, the distance was overcome, but at the cost of one repair and loss of drive on three wheels out of eight (actually twelve, the two rear axles were with twin wheels) But a large number of positive emotions and feedback pushed me to an idea that this truck has not been exhausted yet. There were several attempts to build modifications of the same airfield truck in different versions, which ended, however, at the stage of creating the chassis (I wanted to do something fundamentally more light and durable). Later, I was distracted by building the truck with a crane from, again, @Lucio Switch This truck, being assembled completely in the original version, absorbed almost all my electrics, the technic frames and, in general, almost all the parts (17 motors, three battery packs, 13 meters of pneumohoses, 16 pneumatic cylinders and 131 technic panels). The idea of building another truck on the same scale from the remaining assortment of parts seemed simply insane. And at the beginning of 2018 I found a solution to two problems at once. I figured out how to build both an original and not too expensive in parts truck, which at the same time would inherit design and performance from its two predecessors. Why build the next four-axle monster, when the 4x4 format for trucks is still looks pretty? In addition, there was an opportunity to test my strength in terms of creating a MOC, and not modification. Lego Indominus Mk3 by Alexey Tikhvinsky, on Flickr I left only some recognizable elements from the original truck, which allowed to identify it as Indominus-3: сontours of the cabin, individual elements of the body kit, doors. The functional was done with an eye to the fact that this truck will participate in the February truck trial in Moscow (by the way, riding at -15C degrees turned out to be very "fun", even filming was not possible, everything was frozen, including phones and cameras). But, despite the "competitive" orientation, the equipment turned out to be more like the first version of Indominus: limited slip differentials (three pieces: front, rear and center), chains on wheels (homemade, from the jewelry chain), complex exterior and interior (with Duplo penguins!) Lego Indominus Mk3 by Alexey Tikhvinsky, on Flickr In additional: old pneumatic shock absorbers (very soft and long-stroke), anti-roll bar on both axles, portal gear reduction in pair to wheel planetary gear reduction. I used: 2х Buwizz v2, 4x RC buggy motor (5292), 1x Servo motor, 4x extension wire and Android app made by @imurvai to control this truck with gamepad (works very well and smooth, by the way) Lego Indominus Mk3 by Alexey Tikhvinsky, on Flickr In the end, in my opinion, this truck turned out quite bright and sturdy, and even with 4.5 kilograms weight can handle some offroad in the conditions of russian winter Lego Indominus Mk3 by Alexey Tikhvinsky, on Flickr I hope you liked this orange buddy as much as I do If someone is interested, I'll try to make a detailed review of technical features (with schematics and colorful pictures, yes ), video and some photos of the "nude" chassis. In conclusion, I want to thank @Shurik for great photos and @Limga for his endless patience and support throughout my entire AFOL path! Thank you all for attention! Update: I found a photo from the competition. One of the participants struggled to help me with a loose climb up the hill Update #2: Just filmed a little adventure in snow https://youtu.be/oVwOIyrj6wQ Update #3: Added a video with summer offroad https://youtu.be/CXFRc0i4dWg Update #4: Fun crawling video https://youtu.be/fusAL80vCZI -
Imanol BB´s MOCs and MODs (And possibly good ideas)
Imanol BB posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello people, as i have seen some topics made by some members were they share their creations, modifications and ideas, i thought it was a good idea to start my own topic about that, this way i can avoid filling other topics with too many information by saving all that information here and just posting small texts in those other topics. To start, i would like to share some creations which i worked on: Model Team Nissan Frontier. This is one of my oldest models, i made it even before i knew about Eurobricks, and i would like to share it with you because you might like it or modified it: This model features front independent suspension, rear leaf spring suspension using 5.5 axles, HOG steering, working doors, bonnet and tailgate, 5 seats and a towing hitch; its very possible that some parts are with wrong colors or there could be outdated building techniques, but i think that is not too bad for one of my first LDD models (i am no sure, but if i have enough time and inspiration i could make it in real Technic parts), The LXF: http://bricksafe.com/files/imanol/nissan-frontier/Nissan Frontier.lxf. Model Team Paramount Group Marauder MRAP. Again, one of my oldest models, it is made at a pretty small scale but it could still be considered as "model team" (i think), it has pendular suspension in both axles which are damped by cross-axles which act as leaf springs, it has HOG steering, working winch and doors, a spare tire and 2 turrets that can be mounted on the roof: The LXF: http://bricksafe.com/files/imanol/paramount-marauder/Paramount Group Marauder.lxf Technic Unimog U500 Long Chassis (I have called it UNI-MOC) You might have seen it in the latest posts at 8110´s Mods topic ( http://www.eurobricks.com/forum/index.php?/topic/57543-8110-unimog-mods-and-improvements/&page=78 ), it is a 64 studs long and 24 studs wide model which i started to make because the modifications in the 8110 got to a too high level and i wasn´t satisfied with the whole model, i created this new model to hold all of my wanted functions and details, this model has some designs from other builders: Madoca´s Tatra 2-speeds gearbox (slightly modified to fit in this new chassis), Efferman´s planetary rims, a modified version of Didumos knob gear driven axle and a 3-side dumping system and dropping sides inspired by Kumbbl´s modifications, it was also made by some help and inspiration by Pat-Ard: This Unimog has 4 M-Motors, 2 L-Motors, 2 XL-Motors, 3 IR RC Receivers, 2 AAA Battery Boxes and 3 PF Switches (brick-built with ugly colors), why so many motors? well, as you might know, the 8110 had only one M-Motor inside it, which was meant to drive the 3 main functions of the set (front PTO, rear PTO and the pneumatic pump) the problem was that the functions couldn't be used simultaneously, you couldn't power front and rear PTO´s at the same time or with the pneumatic pump and because this system uses a gearbox and axles to engage and transmit the power to the different parts, this results in a lot of friction and power losing (other of the reasons of why i started this MOC), other thing that bother me about the 8110 was the proportions of it, it was very tall with lifted wide axles, but very thin cab and bed which made it look silly, the chassis had no space for all the functions that i wanted, i couldn't place enough motors or functions on it, and the axles were another problem, the steering pivot and angle was a disappointing, the tires couldn't steer too much with the half pins, and if you removed them, the mudguards and the surrounding elements needed to be placed far away from the tires to avoid them from colliding, these are few of the reasons of why i started to make my own version of this UGN class of Unimog (which are U300, U400 and U500). Some of the good features of this model are: Improved steering pivot (2 studs closer to the wheels compared to standard portal hubs) Wheels and portal hubs can handle more torque without jamming parts The axles are more compact (less tall), so the chassis can move even lower for a more realistic performance Front steering by L-Motor Rear steering (By M-Motor) with the same axle design as the front one Anti-roll bars in both axles, which help a lot to handle with weight and give a lot of stability, and they can be easily removed for serious offroading Remotely shifted 2-speeds gearbox by M-Motor Directly driven pneumatic pump (L-Motor) and PTO´s (M-Motors) for less power losing 3-side tipping 37 studs long 23 studs wide dump bed with dropping sides using a V2 large pneumatic cylinder Drive by 2 XL-Motors So, these are some of my models, i hope you like them, and i hope to upload more of them, i will try to do my best with all them, let me know what you think about this topic and the models, and any suggestion is well received Thanks. -
[MOC] Reform Muli T10X
Anto posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Finished MOC Do you remember my Reform Metrac H7X ? Reform also produces the Muli: As the project of my Citröen DS doesn’t really progresses, I do this project in WIP, to compensate. ^^ The functions will be close to the Metrac ones: 4WD with a 4 cylinders fake engine Steering with 3 modes Front and rear PTOs And I add: A pneumatic pump to add pneumatic tools Central joint (it’s only the front axle on the Metrac) Openable cab with a lever and a pump actionning a pneumatic cylinder. The best function! But this MOC will not be manual, because there is not so much room in the chassis. (I think it’s possible, but the playability will be extremely bad) So it will be remote controlled, using the BuWizz. So: Driving by 1 XL by axle Steering: 1 servo by axle. To have the 3 steering modes: a M motors controls a PFs switch -> it changes the sens of rotation of the rear servo, or it stops it. The pneumatic pump is powered by a M motor That was the start: And now I’m here: On these two pictures, you can see the rear PTO. On this side, the pneumatic pump: And here is the mecanism which allows the possibility to get 3 steering modes: The chassis is very, very compact. I think you can put an elephant on it, it will not move at all. For the tools, I think I’ll make a pneumatic arm (The pneumatic cylinders of the Mercedes truck would be very helpful, but I don’t have this set) And for the front I don’t know, so if you have ideas, tell me! -
[MOC] Ford F150 XLT, Raptor, SVT Raptor Pick up Truck (Updated 9/14/19, added Ford SVT Raptor)
bricksboy posted a topic in LEGO Town
LEGO MOC#35-2 Ford F150 SVT Raptor Octan Livery MOC#35 Ford F150 Raptor Pick up Truck LEGO MOC#34 Ford F150 XLT Pick up Truck My other MOC models: [MOC] Karsan Jest Mini-Bus [MOC] Ford F150 XLT [MOC] London Double Decker Bus Dennis Enviro 400 [MOC] Lada VAZ-2105 [MOC] Subaru WRX [MOC] Classic Cadillac Convertible [MOC] Toyota 6th Gen. HiAce Van [MOC] James Bond Aston Martin DB5 [MOC] Toytoa HiAce van [MOC] Toyota GT86 [MOC] Office Desk [MOC] Ferrari F355 [MOC] Toyota AE86 Coupe (2018 version) in Initial D Animation [MOC] Police Motorcycle #2 [MOC] Sport Bike Stop Motion Speed Build [MOC] New York City Police (NYPD) Car [MOC] Lego Mini Cooper [MOC] Japan Tokyo Taxi vol.1 東京無線タクシー [MOC] Ice Cream Truck [MOC] LEGO California Highway Patrol [MOC] LEGO Police Car [MOC] Police Motorcycle [MOC] New York City Taxi / Cab [MOC] LEGO NYC News Stand [MOC] New York City Transit Bus [MOC] Newspaper Rack [MOC] Coke/Beverage Cooler Initial D AE86 Racer AC Transit Bus AC Transit Bus Short Version Ice Cream Van -
Caterpillar 797F Dump Truck
Sariel posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Here's my little dumper truck. Functions: - drive & steering (obviously) with PF - adjustable suspension angle (left/right) controlled by a Mindstorms EV3 unit that reads sideways tilt from an accelerometer to keep the truck upright; basically a self-leveling suspension - dumping with EV3 reading PF remote using an IR sensor - Baja Claw TTC tires by RC4WD on Lego 56mm rims. I've tried to fit more, but the problem with these trucks is that the chassis has actually little room, it needs to be pretty flat to fit under the cargo hold, and the area with the most room (front of the front axle) is taken up by the Mindstorms EV3 unit. There was a 4-speed transmission initially, but I've taken it out as it kept disengaging under stress (the truck weighs 4.156 kg). Photos: https://www.flickr.com/photos/44849526@N06/albums/72157710566416217 -
[TC16] Martian Heavy Transporter
KirTech LAB posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi! I can't miss the contest about Mars colonization :) My first idea was to create scientific vehicle to gather interesting objects on Mars surface. I take two Xerion tires, two more.. and I've stopped when all 16 Xerion tires were placed on my table. The transmission was very simple but steering system would be very complex. Suddenly I've remembered that I have many sport plans on this summer, and I simply have not enough time to finish this monster. Ok, let's build something smaller :) As far as I know, the first stage of colonization is complete due to this strange machine: Now we can find many roads, tunnels and construction places on Mars. My new model will deliver materials from spaceports to construction places and storages. The first prototype will have 6 wheels and AWD for high performance. Now I'm waiting for nuclear reactor for my vehicle :) To be continued... -
Happy new year everyone! Before Christmas I could finish my lastest project for my fictional Fire Department of the City of Farnheim. This huge new mobile command unit (MCU) replaces an old bus. These kind of trucks are common in cities with more than 400,000 residents here in Germany. Based on an regular truck chassis it has a typical boxed body that can be expanded at the passenger side to increase the room's space. Equipped with high end communication and radio features to handle huge incidents. I've build a five studs wide box to get the right scale for the expansion. The rest is classically 4wide. I attached most of the details to the roof, like an air condition, a few antennas, a satellite dish and a red flash light (that locates the command unit for others at scenes). Freshly arrived at the main fire station it got its first "very close inspection" by some of the firemen. Btw, I got the ideas mostly from here and here (German text version only). Hope you like it. Thanks for watching! Bright red regards, Maik aka Farnheim
-
[MOC] Race Truck MkII
Lucio Switch posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi to everybody I built this moc for the Model Expo Italy, it's simpler compared to what I usually build, but funny to play with. Due to the 2 BuWizz and the 2 Buggy motors it is fast but a bit too much expansive. To avoid this, it's possible to use, as alternatives, SBrick or IR receivers feeded by Li-Po battery or Classic Battery Box, and use 4 L Motors instahed of the 2 Buggy motors, obviously with performance reduction. The instructions of the main model are alkredy available, the "alternatives" are under development, but them will be released in a short time (hopfully). I hope you will enjoy it: More pics here: https://flic.kr/s/aHsmFvvrxX More info here: http://www.lucioswitch.altervista.org/race-truck-mkii.html -
[MOC] MAZ 7310 Uragan Cargo Truck
MrSean7310 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Ladies and Gentlemen, Boys and Girls, BEHOLD: The Mighty MAZ 7310 Uragan Cargo Truck, in LEGO! This massive set, which I have designed over the course of two years, stands almost ten inches tall, two feet long, and is comprised of almost 7,000 pieces. I sat at my computer for hours a day, sometimes, surfing the web, looking at blueprints, building, deleting, building some more, etc. And now, finally, I can reveal my masterpiece to the world! Bwa-ha-ha! Okay, anyway, I have designed my set for maximum playability, stuffing it full of all sorts of awesome goodies, like opening hood, doors, tailgate, and utility boxes. A removable roof, folding rear seats, free-spinning wheels (including the steering wheel), two Diesel engine options, a generator, compressor, radiator, Master Mechanic's Toolkit, fuel and water drums, 12v batteries, large cargo container, winch, wide-load flags, roof racks, warning beacon, fog lights, two sets of mirrors, lightbars, and more! (Whew! I'm out of breath!) Now, for the real machine: The MAZ 7310 (Minsk Automobile Plant, in Russian), was a large 8-wheeled Missile Transport truck built in the 1950s and 60s. Soon after, people started using them as cargo trucks, tankers, tow trucks, and airport fire trucks. Alright, that's it! Thank you all for looking at my LEGO creation! If you have any questions, comment, I'll do my best to respond ASAP. Happy building and have a great day! Update: Also, some of you may have noticed that the cab of the real vehicle is slightly longer. This is true, I had to shorten the LEGO version out of necessity, as the extra length could’ve affected my MOC’s stability and structural integrity. I suppose I could probably figure it out eventually, but I like it how it is. Thanks for understanding! -
Hey all I´m exited to introduce my second MOC here on Eurobricks. I am a true rookie when it comes to building with system bricks, as I've spent more time doing Technic stuff. I tried to make this MOC more realistic than the fire engines that Lego usually releases, and I´ve drawn inspiration from real Scania fire vehicles. Because i wanted to make this thing closer the real thing, I've spent some time at the local fire station, getting to know the real machines. I’m very grateful for comments, questions and suggestions for improvements. Hope you like it, and thanks for taking the time to watch the pictures. Features All doors and hatches can be opened/closed Fully decorated and detailed interior in the cabin Lots of different details that relates to the real deal. Room for 4 minifigs with accessories. 558 parts (without the minifigs) I am very grateful for your support over at Lego Ideas: https://ideas.lego.com/content/project/link/b991a9d2-2265-4ed9-afda-91b9cf0d7f28 Pictures (Bigger pictures in my Flickr account: https://www.flickr.com/photos/131504322@N02/albums) The truck is 8 studs wide, 11 studs high and 17 studs long. This MOC is actually fun to play with. Loaded with equipment, a water cannon and 4 minifigs the possibilities are many. All doors can be opened. The left side is for technical evacuation and rescuing of trapped persons. Here you'll find the hydraulic tools, power tools and life vests. It thinks firefighters deserve appreciation. The salary is low, but still they risk their lives for everybody else. In the back of the truck you find pump controls and connection point for water hoses. The right side of the truck contains tools for firefighting. Different nozzles, hoses and the Compressed Air Foam System (CAFS) If I had a Scania sticker, I would have used it. For now this is proud product of Autoparts. On the roof, you@ll find the water cannon, ladders, hoses, tools and of course the obligatory fire axe. Detalied interior with communication equipment, GPS, IR-camera, flashlights and binoculars. The setup matches real fire engines. "Firefighting is all about megablocks. Busting ours to save yours" Updated picture of the cabin interior. (Rendered in Bricklink Studio) Another color scheme, since yellow seems to be the new white in modern fire engines. (Rendered i Bricklink Studio) Thanks for watching :-)
-
[MOC] Micro Forklift & Truck
Anto posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Here is a little crew! These two models are very compact, so very simple technically. I wanted to do the same type of model as the little LEGO sets. The forklift: The arm can be moved using a worm gear/8t system. The towballs are here to limit the movement of the system. The fork moves when you turn the 12t gear. There is a pin with friction to keep it in position. The truck is even simpler. It has a steering and the dropsides are openable. The LDD file is available on Rebrickable. And here is the video! -
Hello Fellow Lego Fans. Recently I designed a unique MOC, a classic Lego Street Sweeper that has modern features, but still give homage to the classic Lego Street Sweeper Sets including the 6645, 6649 and 7242. I researched each set, and noticed that their availability was becoming lower. So, I thought it might not be a bad idea to do an updated Street Sweeper version for Town and City builders as a possible release. Having to consider modern design aspects, I did try to "build-into" the MOC an easy conversion of the model for those wanting a more "true" town look. Likewise, in a Vintage City Theme, some design elements might not be correct for the time period. So, this design affords the ability of each interested parties to have the ability to "remove" far more than they might need to "add" to the design to make it fit their layouts. I would not consider this idea a "universal" approach as much as an "adaptable" approach. Following all of these considerations, features, and potential applications of the MOC as a kit, I also had to find a unique design that was believable, kept the parts count under control, and served as a believable "next generation" version to Set 7242. A new feature in this MOC is the use of the Lego 2441 vehicle base, which saved parts, fits modern design efforts and shows that with creativity large scale designs can be implemented on the 2441 chassis. It was an interesting challenge to try and incorporate all of these aspects into the design and still make it visually appealing. Currently, my MOC can be found here on Lego Ideas: https://ideas.lego.com/content/project/link/678e85c3-5563-4062-8537-ac26c4761d8e Thanks for allowing me to post. And if any one here likes it, I'll hope they'll drop by Lego Ideas and give it a vote. Happy Building! --Zeeverse
