Search the Community
Showing results for tags 'Ship'.
Found 654 results
-
[MOC] Pirate ship "Silver Crab" - (Captain Squarepants' vessel) - MOD of a Dying Gull ship MOC (LDD WIP)
Murdoch17 posted a topic in Pirate MOCs
This pirate ship is Captained by a pirate ancestors of Spongebob Squarepants (as Captain Bob "The Sponge" Squarepants), Patrick Star (Rick "No-beard" Star the lazy pirate lookout), Sandy Cheeks (Miss Cheeks, a fierce hand-to-hand fighter) and Squidward Tentacles, (Mr. Tentacles, the helmsman and reluctant pirate recruit) Mr. Krabs is another pirate, but off course he has his own ship, the Krusty Krab. The Silver Crab is a ship wanted by Captain Krab's, for a treasure map he engraved into the helm's wheel long ago. (unknown to everyone, however, is that bluecoat Commodore Plankton is stalking Captain Krab's ship for stealing what was originally his treasure... which is now locatable because of said engraved map on Captain Squarepants' ship.) Confused enough yet? The pirate ship has six non-firing cannon barrels, with a movable rudder and a rear sail that swings back and forth. (Miss Cheeks mini-figure's head is not in LDD, so she's headless in the first picture) The ship itself is based off a MOC of the Dying Gull from the Pirates of the Caribbean movie franchise. (specifically Dead Men Tell No Tales) Here is the instructions page where I bought them from. (That is the only MOC I've seen of the PotC ship in question, by the way.) This ship will be bought after the current ones on order are finished. (The Minecraft ship, the tavern, and the palm tree parts should arrive here very soon.) ...and yes, the whole story and background info just came out of imagination as written. No wiki sources were consulted, just what I could remember from watching the TV show when I was younger. Any thoughts, comments, and questions? (This ship will go with my other ships in my pirate port, by the way. I'm trying to cover every corner I can think of) Comparison with the MOC it is based on What are your thoughts on this build? -
[Esl-FB] Ship : The 22 guns Frigate The Applecid
Tezclatipoca posted a topic in Brethren of the Brick Seas
The 22 guns Frigate : The Applecid Felipe de la Manzana commands were top priority for the Elysabethtown shipyards. They achive in a time record a heavy Frigate for the Apple lord and baptised it the Applecid (an easy pun ) as it is a war ship made to kill (Cid...) and it's belonging to the Apple trade empire of Felipe... This ship will be licensed as a Class 6 Frigate. It is the fastest ship I ever made. That's why it's mainly built upon the new BSB style and plan just in order to spare me some headache in development and win me some time in building... And it's the best way to show my new green sails taken from the BSB red ones ! -
One of two ships originally designed to be an armed merchant men for the RNTC back when this limited skirmish on the island of Terraversa was well contained. The dramatic changes in the diplomatic mood of the Brick Seas caused the navy to step in and repurpose the ship mid-construction. The HRS Helios is now a full man-of-war. A total of 48 heavy guns, each broadside hold 24. Down below we can see two full decks of guns, followed by a third full deck for cargo, packed and ready. Her hull is large, long and wide, designed to hold both large cargos and while still maintaining a full gun deck to ward off Sea Rats. The ship remains equipped with cranes and extra cargo hatches for easy loading and unloading. Also, plenty of cloth to move the large ship. Though, had the word arrived at the Beauchamp Shipyard earlier, the Navy never would have paid for such a large and ornate stern section when they could have saved a penny and added a few more guns. Captain Gillette is an old pious disciplinarian. There is no cursing aboard his ship, he is never far from his family monk, who accompanies him into battle, and he begins each day with a prayer during the change in watch. He runs a tight ship, but the crew jokes that if any commander ever had the gods on his side, it is Captain Gillette. The thrifty Captain has more than a bit of embarrassment at the ornate design of his ship. Though at least the stern cannons add a practical element. And the pious Captain takes pride in daily recreating the God, Helios' journey across the Brick Seas and over the horizon. (Another shot, better for the bow piece but (like the rigging) the hoses didn't get rendered in this bottom on) Edit: coming soon hidden content to side by side the Helios and Phoebe (the sun and the moon) which are a pair of similar ships deliberately built to go together, but are not "sisterships."
-
This topic has a lot of photos inside, to make it easier for everyone to see the latest version of my MOD, I have editted this first post to show version 5, 14th Nov 2020. Your feedback is welcome or share your MOD ideas Please! Port View by R Y, on Flickr Bow by R Y, on Flickr Stern Starboard by R Y, on Flickr My Lego collection consisted mainly of SW sets and its MOCs, I was tempted to get the 21322 Barracuda Bay when it came out in April but decided to save up for the UCS A-Wing, which I still haven’t got around to build yet, I have been modify the 75175 A-wing. A-Wing Mod by R Y, on Flickr I wasn’t too keen on the 31109 Creator Pirate Ship when I first saw its photos, especially the brick-built sails. During the Queen’s Birthday long weekend, I was reading posts on OZLUG of buying multiple sets to make it a bigger ship; that grabbed my attention as I mod all Lego sets where possible after I figured out Bricklink. However, at RRP of $160 AUD each, I might as well just buy the 21322 for $300 AUD; then again thanks to OZLUG, I realised that they are $119 at Kmart, meaning $238 worth of investment, no brainer! I quickly read up on reviews from Brickset and Brother’s Brick, how the completely brick-built design is its selling point, instead of using specialized boat hull pieces. My local Kmart had no stock, so I went to the next nearest one, nothing on the shelves again and a store girl told me all they have is already on the shelfs even though the online stock check shows limited availability. Disappointed, I was about the leave the store empty handed before I talked past the customer service counter, there was only one person in line so I decided to wait and check. The service girl was very helpful and checked the stock room for me, it turned out they do have three at the back, which I gladly picked up two; she told me apparently people try to steal Lego all the time, so they keep the good stuff at the back. I had to wait for my baby to settle and sleep before started building that night. As the original model is built in 3 sections: bow with forecastle, waist, stern with captain’s cabin; I decided to build 2 x waists sections and have 3 masts. I always build repetition sections step by step simultaneously instead of finishing one section and start another, personally I find this method quicker. My aim is to stick to the original Lego design and finish the hull asap, redesign the masts into foremast, mainmast and mizzen mast, and use the remaining pieces to touch up and make the 2 waists transition smoothly. 31109 Long Side View by R Y, on Flickr I wanted to rig the ship from the bowsprit to the stern flagpole, I had to move the “Plate Round 2 x 2 with Pin Hole and 4 Arms Up” to the mainmast beneath the lookout so the arms are equal distance to the diagonal spars from the foremast and mizzen mast. I spent more time on the foremast and rigging than any other sections. I tried a few different arrangements before settled down on the current layout, where the rigging goes down to the bowsprit from the upside-down diagonal spar. I used light bluish grey Technic Bush instead of the yellow ones provided. The hose piece is still slightly short and the bowsprit is pulled upwards, but the jib sail hides most of it. Overall, I was happy that I achieved my goal. Masts and Rigging by R Y, on Flickr I added a 1 x 2 red brown plate to each of the gun port openings so they are not too close to the waterline, I initially wanted to add 2 pieces per opening, but they were too high and affected the guns inside. You can tell where each of the section ends with the breaks from the 3027 6 x 16 plate in dark tan secured with 2 x 2 blue round tiles. I made sure the 1 x 4 special plates overlap the gap to secure the sections. The alternating red and light orange strip along the deck worked out perfectly, I was initially worried that I may get a double up of same coloured plates with my MOD. Joins of the Sections by R Y, on Flickr As Lego only gives half the number of guns compare to the gun ports, having 2 sets gives me 4 guns to fill up the front gun deck, squeezed 2 minifigs inside with torches. Gun Deck with Baboon by R Y, on Flickr I plated over the opening next to the gangways on the 2nd waist, to make it look like a quarterdeck, but not really raised due to the limitation of my skills in the mod. I really like the brick-built rowing boat from the alternative Skull Island bult, I made it longer using 2 x 2 slopes at the stern and made other changes as certain parts were already used in the main ship built. I also built a boat rack with 4 cheese slopes and some plates. The rowing boat fills up on the empty quarterdeck perfectly, I really like how it turned out. Rowing Boat by R Y, on Flickr With the 2 sets of 3 human minifigs, I swapped around their outfits, brought in a pair of black legs to swap out the peg leg. Now I have 6 different minifigs, I left out the epaulette for the officer to differentiate him from the captain. a9 by R Y, on Flickr a8 by R Y, on Flickr I built the red/green parrot and blue seagull according to the instructions, again had to use some different pieces due to availability. Lastly, I added the pet baboon hanging off the shroud, it’s a really fun build where its arms and waist are twistable to get a good pose. Baboon by R Y, on Flickr I really liked how this MOD turned out, this is probably the cheapest and easiest way to get a Lego 8-gun full-rigged-ship (three or more masts), even the 21322 only has only two masts. It’s around 58cm long from the tip of the bowsprit to the edge of stern flag, around 36cm tall from the tip of mainmast to the bottom of the hull, 19cm wide at the horizontal spars. With the elongated waist, it makes the forecastle and poop deck seem small in comparison, a bit out of proportion to be honest; but at this stage, I don’t have the skills to design and make them bigger. Side Front View by R Y, on Flickr Top Front View by R Y, on Flickr Back View by R Y, on Flickr
-
[MOC] The Yago (green and white pirate ship) - 21332 MOD with brick-built sails from 31109
Murdoch17 posted a topic in Pirate MOCs
Captained by a Welsh fellow named Henry Smithfield, this ship, the "Yago", originally operated out of what became one of the Southern-most English Colonies. The mission was as a privateer to harass any Spanish ships coming from the Caribbean to the old world with gold and silver, (plus harass and steal from the French), for around five years, starting in 1705. But eventually, Cpt. Henry grew tired of paying his due of treasure to the English crown, and set off to make his own way in the world "free" of any government. He moved his base of operations to a small abandoned island in the Caribbean with his crew, used by Islanders from years prior. He got his crew to complete a fort, and used it as his base of operations. He plundered many a French, Spanish, and other nations' ships, along with his former comrades in the English navy. In early summer 1717 the Yago was last seen by some trappers on land (near what later became the port of Savannah, Georgia) sailing low in the water, going north, unknowingly into the path of a massive hurricane. The resulting wreck has never been found, and it was rumored to have been loaded to the gun-ports with gold and silver taken from a Spanish treasure ship by Florida's southern coast. (which had been found, incidentally, empty of most of it's treasure in the 1960's.) This could explain the heavily laden shape of the Yago that day in June 1717. As to what happened to the ship after it left the later-day Savannah area is anyone's guess, as it seems to have vanished without a trace off the face of the Earth. In reality, this ship's shape is inspired by set 21332, (Ideas' "Pirates of Barracuda Bay") but with the brick-built sails of set 31109. (Creator "Pirate Ship") The ship features the Ninjago pirate's flag as I don't have a way to make my own. (I don't want to change it anyway, as it reminds me of being inspired to build my original pirate ship by the Skybound sub-theme of Ninjago.) The stern of the ship, features the ship's wheel and flagpole for the ship's flag along with the ship's name, "Yago". The green feathers of my parent's talkative pet bird, Yago, (actually a Nanday Conure we rescued 11 years ago) inspired me to name the ship after him. I also tried to think of a bird shaped figure-head for the bowsprit, but failed to think of a good way of doing him justice. The ship is devoid of any major below-deck features, except for the eight firing cannons. The only place there is any real furniture is the captain's cabin and that consists of a table and rotating chair. The table features a nautical chart, wine glass, and a set of scales for divvying out loot to the crew / ship's purse. (for repairs and "edibles" stocks) Captain Henry Smithfield (in green) and his crew. (he has his old sword here. Need to update this picture!) Here is the Nanday conure my pirate ship is named after. You guys can also build you're own version of "The Yago" and the dock now that the LDD file is available here at my Bricksafe page. NOTE: six parts are missing from the file: Two of this 1 x 2 rounded-edge plate in black, for the rudder. Four of this black part 1x1 bracket, near the bow. There are some pieces placed next to the ship, which are for the rudder, above the amidships ladder on the sides, and for the bowsprit area. UPDATE: The ship is finished, with new pictures and text detailing the ship's history... what do you think of it? Any and all comments, questions, suggestions, and complaints are welcome! -
[MOD] Pirate Ship - Seacow - (21152 MOD) with Captain and crew figs - real life MOC
Murdoch17 posted a topic in Pirate MOCs
This strange, pixelated-looking ship with the cow-shaped figurehead has sailed the digital seas and plundered many a helpless Minecraft village. The NPC life was good for the three man crew of the "Seacow", but a chance encounter with a User Exit Portal (think like TRON) sent the pirate ship Seacow into the real world, albeit still in it's 8-bit form. Now, stuck in an unfamiliar world with strange logic, (Round surfaces? What is this deviltry!?!) the crew of the Seacow with it's Captain and nameless crew will have to navigate a way back to their computer paradise from the Pacific Ocean using "digitalized" mariner techniques. This ship was inspired by set 21152 (Pirate Ship) from Minecraft theme, (and the Seacow steampunk pirate ship from TLM) this pirate ship is finally done in real life! The ship's name (Seacow) is proudly placed on the stern railing. The ship breaks into three parts for storage (or for sinking scenes!), and comes with a plank for walking people into a watery grave that slides left and right that is located in the middle section. Here we see Minecraft pirate Captain Steve (also known as Peg-Leg Stevie, to differentiate himself from the famous original Steve) of the pixelated ship "Seacow". The crew are nameless and dimwitted, a curse of being former digital NPCs. They go by various nicknames the Captain gives them, but are most commonly known by the label seen above their heads: Pirate One (in middle with sash) and Pirate Two (on right in dark blue jacket). Comments, questions, suggestions, and complaints welcome! (Also, as an aside to the Moderator's, I put this is "Pirate MOCs" to hopefully get more comments on it... I don't think the "Licensed theme" is right for it, as it IS a pirate ship, after all!) -
[MOC] The Golden Bounty (Captain Soto's pirate junk) - slight Ninjago set 71705 MOD
Murdoch17 posted a topic in Pirate MOCs
I thought this would be better suited in the Pirate sub-forum, because while although it's Ninjago based, it is supposed to fit in with Hook's ship and my other pirate vessels at my skull island. I also apologize for the lack of uniform background... my photography cloth is sadly not available at the moment. The following story is partially based of the Ninjago TV show and my own imagination, while the model has two cannons, nameplate, mini-figures and pirate flag added to the stock set 71705. The Golden Bounty was an identical sister pirate Junk of the Destiny's Bounty, and was the original flagship of Captain Soto for many years before it was accidentally beached on a reef near Tiger Widow Island and then purposely destroyed (blown up) to avoid the ship being refloated and used by the Imperial Navy of Ninjago. Soto then had an identical ship created by the Djinn Nadakhan, as one of his three wishes. He then double crossed the devious wish-granter, stuffing him into the Teapot of Tyran (the only thing capable of holding a djinn captive) during a pitched sea battle during a storm. He then threw the teapot into the sea inside a locked trunk. (how he did the actual catching of Nadakhan and stuffing him into the teapot remains unknown, as Soto never recorded how he did so, and professed not to remember once revived in the modern day) Once that was done, Nadakhan's crews hid their master's ship (The Misfortune's Keep) in a secret cove, and then turned themselves into authorities to be banished to other realms... all the while panning secret revenge on Soto and Ninjago itself for the imprisonment of Nadakhan. Sato and most of his crew died from exposure shortly thereafter, as they somehow moved his newer ship (the Destiny's Bounty) into a desert far from any water via magical means. Only one crewman remained alive, carrying with him the secrets of Soto's magic in a big thick book... his name was Clouse. some of the crew of Sato's ship (L to R): - Captain Soto, master of the pirate junk "Golden Bounty" - Snake Jaguar, known for his cold, calculating demeanor - Mutt the Mute or "green-eyes", It was later learned he was a non-mute spy for the Imperial Ninjago Navy. - Cyren, known as a very poor singer. Eventually joined Nadakhan's crew as a spy for Sato. - Rodney Dangerbuff, yes, that is really his name. Why do you ask? The ship's name is emblazoned on the stern of the vessel. The ship's indoor steering compartment, and a below decks hold for treasure. The top of the steering compartment come off in two ways: the roof is removable, as is the actual little building that houses the steering equipment. This model sub-section then opens up for easy access to the inside. You can also see Sato's pirate flag in this picture. Well, what do you think of my MOD / the storyline? Comments, questions, and complaints welcome! -
[MOC] Demon-crewed Pirate Ship - "Hell Bent" (4195 /31109 MOD) with brick-built sails - WIP
Murdoch17 posted a topic in Pirate MOCs
This ship was heavily inspired by set 4195 (Queen Anne's Revenge) for the ship itself and set 31109 for the brick-built sails + pirate flag. The vessel is named the "Hell Bent", and is crewed by sailors-turned-demons, led by Captain Victor "Jawbone" Blucher. It will be built after the "Silver Crab" pirate ship is done. The vessel has eight cannons ready to fire at a moments notice. The rear of the ship has the nameplate on the stern, right below the custom brick-built pirate flag. The model has a removable steering area for access to the captain's quarters, which has a desk and chair with two wall lanterns nearby. Captain Victor (the figure on the right side) lost his lower jaw after a pistol shot at a vision of The Man Upstairs rebounded unto him, and was turned into a demon (along with his crew) by said entity for his crime against nature. He also gained an painful iron jawbone as an additional punishment, and so he could communicate with his crew verbally. The Hell Bent and it's crew have roamed the 7 seas for about 28 years now, only allowed to enter a port once every seven years for a week. Just like the legendary storm-tossed Flying Dutchman and it's infernal crew, this ship is a bad omen at sea for merchants, but strangely is considered a good one for pirates, since it was a pirate ship to begin with. Usually, if the ship is sighted by a merchant ship, the crewmate who saw it will then die and join the demon-crew's ranks, but for pirates, it is allowed to get closer to exchange news of the world via bags of mail / news clippings / etc. sent over in waterproofed bags. (In reality, I'm going to use Nexo Knights lava soldiers' heads and torsos for the crew and captain.) If you have any thoughts, questions, complaints, suggestions, or comments, please post them below! -
This is my JAWS MOC. It can be supported on LEGO IDEAS here if you have a spare minute - https://ideas.lego.com/projects/390cf845-d64c-44fd-844b-b30fd42d5f12
-
This has been my first LEGO MOC, I designed this on BrickLink Stud.io after Porsche collaborated with Star Wars to make their own spaceship. When I first saw their design I instantly fell in love with it, and I thought I might just make that in LEGO. Thanks to everyone for taking a look. Pictures
-
[MOC] The Bowmen Guild Ship and Outpost - Ideas submission
Rarah posted a topic in LEGO Historic Themes
Hi all I have uploaded a new castle ship submission on IDEAS with custom torso designs, shields, flags and more. Please check the link below for better pictures and let me know what you think and if you like it support me :) LEGO IDEAS SUBMISSION - THE BOWMEN GUILD SHIP and OUTPOST An adventure awaits! As the old kingdoms went into war and forced many out of their homes some have decided to form a new guild and set sail for a new adventure! Led by Sir Joe many mercenaries, merchants have joined on a long journey down the river, through the sea, down the river again and some lakes and more rivers and so on... till they have reached a new tropical paradise! Setting up a simple outpost to resupply and rest they have now started to explore a new area. With many having a somewhat bandit history they all agree to use bow and arrow as their main tools and symbol. On their journey they have met a little girl. A self proclaimed princess with a magical flying chicken. Only the girl can understand her and talks about a treasure. That treasure is a magical egg? What will hatch out of it and will they ever find it? Danger ahead! Sharks ,alligators ,venomous insects everywhere they venture. Other lost knights might pose a danger or could join and help with the mission. Includes 6 New Minifigures all with new exclusive torso prints! Bowmen: Sir Joe, Swordsman, Archer, Knight, Princess Aki Other: Lost Ben (falcon knight) & 5 Bowmen printed shields (4x oval) 1x (triangular) - mounted on the ship Set contains: The Flying Chicken (main ship) 38 x 26 x 14 cm ( L x H x W ). There are not many castle ships out there and instead of a castle I have focused on something that has nice playability, looks great, is not too big or small and can have it´s own unique story and a is a new non existing faction. The ship alone has about 540 pieces. And should also have a sail in yellow colour with black cross inside and the bird symbol in the centre but I need to figure out how to make it in designer :) I will update it when I figure it out. or if not I just post a standalone picture of the sail. The ship has a secret storage room under the back section and comes with Bowmen printed Flags. Outpost A simple building standing in the swamp or near water. Has a table, few supplies, secret storage a lookout and a balcony for fishing. Looks great requires only about 200 pieces to build and add a lot of playability to the set. The outpost comes with a plate on the bottom and is removed in some pictures but it definitely must have a plate for stability :) Raft of Lost Ben Basic raft made out of bamboo to survive till help arrives! Additional content The set also includes lots of tools like fishing poles, gold coins, bottles, bags, containers, spyglass, compass, paddles and other accessories. Cancer, rat/mouse, crab, shark/alligator, parrot, chicken, sea star, monkey The whole set is about 822 pieces and should be affordable for the majority of customers and big enough to be a complete standalone product that can expand the existing LEGO themes and connect to their existing stories. I love designing this set and as much as I would love to make it huge I had set a target that I don´t want to produce a set that will be unreachable for many castle fans. I also tried to be true to LEGO official sets and also don´t "overdo" with tiles to cover studs etc. And off-course to limit the piece count! In the end I want it to be really affordable, playable and easy to build. No weak points and illegal connections and no falling off pieces too! :) maybe just a drunken knight might fall in the water after too much ale! :) All of these designs are my original content and builds except the little falcon logo on a customized falcon knight torso. I wanted to connect to an existing castle storyline. For the sake of copyrights that can be removed if necessary and replaced with a "generic" knight. But I assume the Falcon logo is a LEGO original design =) I wish LEGO will finally revive a castle storyline or choose a castle set for Ideas and well .. may it be this one :). If you like my design please share it and support it. I am still working on the ship design (sails and the holders) so you can post your suggestions but basically I wanted to include an rolled sail but that is not really possible in studio. I will add a picture I have also built the first prototype of the boat which is a bit smaller and different from the final submission. Thank you all ♥ -
as i made a lot of spaceships, here is a selection of my creations. Just for your eyes!! A small starfighter, made with boat parts Harpon: starfighter "Harpon" by Sebosaure Brite, sur Flickr Bomber: P1060900 by Sebosaure Brite, sur Flickr Y-E wing, neo-classic space style Y-E WING CS style by Sebosaure Brite, sur Flickr Kameleon class battlecruiser: Battlecruiser by Sebosaure Brite, sur Flickr other view: camouflage by Sebosaure Brite, sur Flickr small ship space rescue and patrol by Sebosaure Brite, sur Flickr micro fighter ( 10 parts ) P1060331 by Sebosaure Brite, sur Flickr speed figther recon-class fighter by Sebosaure Brite, sur Flickr Pacificator: pacificator nuanced shiptember 2018 moc by Sebosaure Brite, sur Flickr
-
Hello everybody!! I know than I di not post a lot of message in this site; but I would like you present one of my biggest project; an Armaments Rigged-up Moving Deck; Ii's from the Macross univers; for fans, not than it's just the arm of the SDF1; the number is the 03 because the two first models have been destroyed in the film; but the fleet build 10 other ARMD. Thoses whose not visible in the movies, but fansite expalin than significatives modifications was possibles in other ship. L=130 stud; 6.000 parts 10 kg P1070021 by Sebosaure Brite, sur Flickr with small fleet: P1070024 by Sebosaure Brite, sur Flickr P1070017 by Sebosaure Brite, sur Flickr P1070009 by Sebosaure Brite, sur Flickr
-
Hi everyone! I hope you are all well and healthy during these difficult times. This is my first SHIP (Seriously Huge Investment in Parts) and my entry for this year's SHIPtember. It is 147 studs long and features a full interior. I built most of it during the month of September and finished up the interior in the following weeks. This ship is an idea that I have had for over 10 years now and I am so excited to finally have realized it. I hope you'll enjoy it as much as I did making it. This build is dedicated to all the brave medical professionals that have worked so hard this year to keep us all safe, including my awesome sister who is a D.O. and who this ship is named after. It serves as a reminder that as long as we have heroes like them and we listen to them, we can make it through this difficult time and survive into the far future where such a spaceship could be a reality. The HSS Ceyda is a moderately sized, but fully equipped hospital spaceship (HSS). Once built by the Lego Space Federation to help out in the Great Blacktron War, she now mainly goes on humanitarian missions, traveling from system to system to offer medical services wherever she can. She is equipped with an emergency room, surgery room, sterilization room, radiological services (including CT), rehabilitation center, doctor's office, dentist office, optometry office, laboratory, pharmacy, wards, cafeteria, 10 escape pods, and more. The ship has no weapons, but it has an extra powerful shield generator to protect its passengers. Attacking the HSS Ceyda is considered a war crime by the Space Police. In case a distress signal is received nearby, the ship carries an ambulance shuttle that can be dispatched to go and bring potential patients back to the hospital. Above the hangar is a landing pad only for the ambulance and a decontamination airlock so that the paramedics can land and bring patients into the hospital without carrying in any space germs. There are tools on the ambulance landing pad to service the ambulance, but for more extensive repairs, the ambulance can enter the cargo and repair bay in the back. The landing pad can be removed for better access to the hangar. All throughout the ship there are teleporter pads known as "Televators" with which people can quickly travel to different parts of the ship simply by saying where they want to go. I designed the ship to split into two halves for easier transportation. On the backside of the hangar, there is the main entrance to the hospital as well as ladders which lead up to the crew's quarters. Here you can also get a good look at the laundry room. The roof of the wards section of the ship can be removed to access the interior. There are four wards with a total of 16 beds as well as 2 bathrooms. One of the patients in the ward is a tribute to my best friend Randy who sadly lost his battle with cancer last year and was a big Spider-Man fan. Each bathroom features a toilet, a sink, and a shower with handle bars and a fold-out chair for paraplegics. The escape pods are located directly under the wards. In an emergency, the patients are automatically lowered into the pods and ejected. At the front of the ship, there is a cafeteria where both patients and visitors can come to eat. Diners can entertain themselves by viewing the stars through the large windows or watching the TV in the back. Under the cafeteria is the rehab center gym where patients can regain their strength or lose some of the calories they gained at the cafeteria. On each side of the ship are large engine rooms where the engineers can maintain the ships's engines. Underneath the bridge is the captain's cabin with a bed, wardrobe and desk for the captain. Only the captain can teleport here. The captain's chair is located toward the back of the bridge from where he can easily oversee his crew. Next to it is a holo-map and behind it is a Televator which can only be accessed via a secure access code. The bridge crew members each man a control station in front of the large panoramic window. In the back of the ship, it has 2 main engines and 4 auxiliary thrusters, as well as the entrance for the cargo/repair bay. Here you can see the cargo/repair bay doors when open. The back wall can be opened and all 3 decks inside can be accessed by removing them like drawers. Here is an overview of the three decks once they are removed. Let's take a closer look at them, starting with the first deck. This one contains the reception and waiting area, pharmacy, laboratory, doctor's office, administrative office, dentist office, optometrist office, and a restroom. Several patients are waiting to be seen, including an Explorien who got a little too close to an egg while exploring an alien planet and now needs to get rid of a facehugger. One of the Mars Mission aliens is checking in as he accidentally impaled himself. Another alien is getting his prescription from the pharmacy. Meanwhile, there are reruns of Ninjago are playing on the little wall-mounted TV. A technician is doing some lab work while Dr. Zarifi (my sister) is entering her office to see a patient. Here you can see the restroom and the optometrist office where Dr. Fram (my real-life eye doctor) is having my sigfig perform vision tests. Meanwhile, an alien is having some dental work done and a robot is performing administrative task. The second deck is reserved for the crew members and can only be teleported to using a secure access code. In the Cargo & Repair Bay there are stacks of supplies and Octan concentrated power crystal fuel cells as well as a workstation for making repairs. There is also a small mech for moving heavy objects. Opposite of the Cargo & Repair Bay are the crew's quarters. There is one for male and one for female crew members, although all genders are welcome on board. The corridor in the middle leads to the engine rooms on the sides of the ship. Both quarters have a row of bunk beds, a small desk, and an adjacent bathroom with shower. Both the inner (blue) and outer doors (gray) of the Cargo & Repair Bay can be slid open and closed. The upper deck is connected to the ambulance landing pad so that critical patients can be brought directly to the ER or into surgery. On the other side of the upper deck is a room for radiology services, including an MRI machine, and a lounge where the crew can come to take a break.and have lunch. The bed of the MRI machine can be rolled in or out and there is a small room from where a crew member can operate the machine. The surgery room is state-of-the-art and features robot arms with which the surgeon can make precise operations from behind his control desk. Next to the operating room is the sterilization room where a robot sanitizes the medical equipment. Here you can see it flying alongside all the other SHIPtember 2020 entries. SHIPtember 2020 Poster by noblebun, on Flickr Again, I hope you liked it. Let me know if I forgot to include anything or if there's anything I could improve. Thanks for looking and stay safe out there!
-
Abe Lincoln's History Celebrity Soirée on the River of Time Cruise
Captain Key posted a topic in LEGO Licensed
Support a LEGO Idea? Submitted this idea to LEGO, but built it to fill a need for more steam punk builds in general. Anyone who's familiar with steam punk have some details they would add to this that could make it more appealing? In 1865, a time traveler came to Abe Lincoln and told him his gruesome fate. Wanting to avoid this, Abe agreed to come aboard the time traveler's vessel and live his best life: treasure hunting through time! Along the way, he gathered a crew of history's most adventurous people. Along with Abe came Cleopatra, Sun Tzu, Socrates, Robin Hood, and Blackbeard. He persuaded these celebrities of history by offering fame and fortune beyond their wildest dreams. The vessel itself is a hardy steam-powered copter ship that can travel on water or through the air. It is driven by a lightning rod device that uses static electricity in the clouds and lightning to power its fuel cell attached to the wheel. That wheel is connected to a helm clock and an engine clock where the crew can set a course for any time throughout history. One can remove the rear deck in order to stow helpful items and treasure! A rear propeller thrusts forward movement while side propellers affect the yaw. Heavy chains keep the rotor and engine assembly stable while in flight. Get ready for adventure and fun as this all-star crew wets their feet on this maiden voyage tea party! Support this time machine idea! -
Here's a wee little project I've spent the last 12 months on. Yes, it's a 3+ meters long LEGO ship that floats (without a drop of glue), moves and recovers sunken submarines, occasionally ripping them apart in the process. There's really too much to describe here so allow me to present you with a video covering all the details: -
(snip)
-
Miss Octan is aiming to break the Lego water speed record!!!! She contains 806 parts!!! She features 8 massive flame spitting jet engines and a huge spoiler!!!! The concept of this build is a powerboat loosely based on any record smashing boats and Ekranoplans but rather with an approach to be pleasing to the eye (I'm a mechanical engineer but no engineering accuracy is present here,sorry:P).The front and the bottom pieces are a Lego airplane tail!!!The design was straightforward and joyful and stability was a fundamental factor of the building process. I want your opinions in the comments!!!! https://www.bricklink.com/v3/studio/design.page?idModel=172979
-
Today, I am proud to present you my I-XTS (Intersystem eXtended Transport Ship). When I discovered the release of the 75293 Resistance I-TS Transport set, I immediately imagined to make a bigger version. When SHIPtember started (one month to build a ship of at least 100 studs) then I decided to actually build it. So the base concept was easy: increase the length of the standard I-TS set up to at least 100 studs knowing that the original is only 43 studs long. Because of the extended length, the ship name was easy to find. The base design concept In the SW universe, it is common to find extended versions or variants of a base design. Look at Star Destroyers, Calamarian cigars, Corellian corvettes, YT variants, all these nice ships we see in Dark Empire.... But ok, just increasing the length is easy. Still ensuring that the resulting design is attractive is another topic Instead of having a single cargo bay, I decided to go with 2 bays with a small central module to create texturing and shape variation. Globally, it works: With a widened and detailed cockpit, 2 large cargo bays, and an larger engine section, the ship is coherent. Please note as well as the ship backbone is 2 studs wider than the stock model. Technically, there was nothing too challenging in building the backbone based on the I-TS instructions. Just add technic bricks until you reach the desired length, and abuse of technic pins to make everything fitting together. In the end, it is robust. The result I-XTS profiles by Veynom, on Flickr I-XTS details by Veynom, on Flickr I-XTS inside by Veynom, on Flickr Anio pointait le manque d'espace dans la soute cargo .... moi, je peux facilement y loger un Bantha. Some reviewers complained about the tight cargo area ... well, I can put a Bantha in each of my cargo bay. Fine, taking decent picture of this long ship is more difficult than actually building it. If you're interested in the constructions steps, please see below. It took me around 30 hours spread over 10 days. Day 1: After the first hours, the backbone is ready. It measures already 96 studs and has the correct shape. The location of both cargo bay is already defined. The extra width (2 studs) is very noticeable. SHIPtember 2020 - day 1 by Veynom, on Flickr Day 2: The top of the ship is becoming wider to match the original shape. The side supporting structures are in place and the central section start showing how it will look like: a kind of mirrored of the front section (just behind the cockpit). Clones have been supplied as re-enfircement to speed up the construction process. SHIPtember 2020 - day 2 by Veynom, on Flickr Day 3 Time to play with the engines (port side). Size seems fine from the first try ... and the ship officially goes over the 100 studs threshold. Building the engines and the supporting pod was quite easy based on the original instructions. It was even fun. SHIPtember 2020 - day 3 by Veynom, on Flickr Day 4 After the engine, the bow. The cockpit is twice wider than the original I-TS and is the larger section of the ship. Initially, I wanted to put 2 minifigs inside but I failed due to some structure constraints as you will see below. From this day, the length is around 110 studs. SHIPtember 2020 - day 4 by Veynom, on Flickr Day 5 I wanted to detail the cockpit further and that consumed a lot of time. Finally, after too many build-unbuild-rebuild phases, here is the result. Detailed inside, slick outside. In the end, I liked how the modified plate with rail perfectly fits on top of the panel 1x2x1. Sadly, I had to drop my initial idea of putting 2 minifigs in the cockpit. SHIPtember 2020 - day 5 by Veynom, on Flickr Day 6 Now that both the bow and engine designs are complete,d it is time to work on the main body. The core section is taking shape and the same pattern as the original I-TS is mirrored to provide the final design of the transport ship. The large cargy bay doors and panels are being worked on. As of right now, 8 technic bricks are missing but these are on their way to my home. SHIPtember 2002 - day 6 by Veynom, on Flickr Day 7 Almost there. The bow is considered as completed and the design should not change anymore. I also reached a satisfying balance between greebling, texturing, and colors. Again, it required a few build-unbuild-rebuild phases (same player, try again) but ultimately, it is good looking. But it is about time as we are on the 24 of September with only 6 days to go before the deadline. And the cargo is large enough to hold a Bantha! Achievement! SHIPtember 2020 - day 7 by Veynom, on Flickr Day 8 This is copy/paste day. If it works in one location, then I copy it everywhere. As I received the technic bricks, I could complete the cargo bays. Then the 2nd engine pod. 5 days before the deadline and still the rear section is not over, without mentioning the core section. SHIPtember 2020 - day 8 by Veynom, on Flickr Day 10 Job done! Intersystem eXtended Transport Ship by Veynom, on Flickr A simple yet elegant transport ship, if you ask me. And now the question, could you spot where this part is used ? Minifig, cape plastic
-
This is a small project i'm currently working on. I designed a rough prototype with my own bricks to create the shape of the hull and to figure out the right distaces inbetween the parts. Then i build the ship in studio and gave it the colours of the black seas barracuda. I would love to get some suggestions for different colour palettes, preferably with a light and dark bluish gray hull, because i've got a lot of those parts already. In the future i might buy the parts i need to build this ship in real.
-
[Docked Ship] "HMS Legion" Class 7 Heavy Frigate with 28 Guns
The Neighborhood Merchant posted a topic in Brethren of the Brick Seas
With recent events transpiring on the brick seas, paranoia and hostile thoughts continue to plague many minds. One under the influence of this paranoia, an unnamed governor (NPC) under the command of Corrington, has ordered a personal heavy frigate to be built to patrol surrounding waters of any and all possible "hostilities". After the ship's completion, it set course for the governor, but oddly on its arrival, the governor has disappeared. The island was charted and the governor was heavily sought after, but with no luck. Perhaps his paranoia got the better of him? Or was it those pesky tribals? The facts of his disappearance may never be unraveled but one fact does remain: the Legion remains docked, waiting... (Apologies for the ship exceeding the background, I was not prepared for the sheer size of this behemoth. ) C7 by The Neighborhood Merchant, on Flickr IMG_6873 by The Neighborhood Merchant, on Flickr IMG_6871 by The Neighborhood Merchant, on Flickr Oddly, the ship was never officially certified to the fleet of Corrington. In fact, the ship's manufacturer has remained anonymous. With these peculiar facts, the crew to the Legion find themselves wondering just who their allegiance is pledged to now? IMG_6867 by The Neighborhood Merchant, on Flickr Now with the governor's disappearance, the unnamed island is bursting with new life. Pirates, scoundrels, Oleanders, Corries, Eslandolians, and merchants alike all want one thing, to take on the seas with the Legion. Captain William Marcus of the Legion and his crew have now turned to the pleasure of coin. What is to become of the crew of the Legion? Will their colors remain true and their loyalty to Corrington come back, or will they burn their colors and turn to the rebellious side of the Sea Rats? Perhaps even an Eslandolian or Oleander will purchase and reconfigure the ship to serve their empire. IMG_6796 by The Neighborhood Merchant, on Flickr Thanks for reading my story! I built this ship a while back before I got fully into Eslandola. Since I'm part of Eslandola, I have no use for this Corrington heavy frigate so I'm not licensing it as my own. If you're interested in licensing the ship to your fleet, feel free to DM me! Here are some more pictures of the ship and its fun features: IMG_6863 by The Neighborhood Merchant, on Flickr IMG_6865 by The Neighborhood Merchant, on Flickr IMG_6810 by The Neighborhood Merchant, on Flickr The flooring to the upper and lower deck can easily be removed to get access to all sections of the ship! IMG_6815 by The Neighborhood Merchant, on Flickr IMG_6784 by The Neighborhood Merchant, on Flickr IMG_6828 by The Neighborhood Merchant, on Flickr IMG_6835 by The Neighborhood Merchant, on Flickr IMG_6830 by The Neighborhood Merchant, on Flickr night by The Neighborhood Merchant, on Flickr IMG_6878 by The Neighborhood Merchant, on Flickr The base for the ship has multiple features and enjoyable displays, here's a small underwater view from the swivel corner. Play Feature by The Neighborhood Merchant, on Flickr One of the swivel corners had a turnable gear that opens up a minifigure display underneath the "HMS Legion" pattern. IMG_6860 by The Neighborhood Merchant, on Flickr Full crew for the Legion. IMG_6879 by The Neighborhood Merchant, on Flickr The front can easily be opened for a quick display of a hat/hair rack to quickly exchange the headgear for the minifigures! Goodbye! by The Neighborhood Merchant, on Flickr Another small ship I made alongside it, Rose Mary. The base is all on hinges so it can be folded and stored inside the stand for the legion. Thanks for viewing! I hope you enjoyed. As always, may your journeys on the brick seas be filled with wealth! Cheers. bam 2 by The Neighborhood Merchant, on Flickr More play-features/misc. pictures: -
This is a ship I've been playing with for the past year or so, trying to get it right. The idea was to build something influences by the Resistance bombers - the T shape is something I've wanted to implement in a big ship for a while now. Eventually, I settled on this - a small transport/freighter. I used the UCS Falcon's airlocks and dish for scale and built out from there. I'd have liked to do a bit more with the interior but ultimately, the structure didn't allow me to open up as much as I wanted. Still, the overall shape was really pleasing to get right. And now after a few months of it sitting around the house, I've finally taken some photographs! I've been imagining it as a Resistance-era pirate radio station, but really it's more an exercise in Star Wars style and shape-engineering. A few more photos and an annotated floor-plan can be found in this gallery. :)
-
[Factions Ep. 6 - Cat C] (L13 - Fondor - CFS) Part 2: The CFS Peace and Quiet
RocketBoy posted a topic in Factions Archive
*Your entry has earned 7 XP* Part 1: The Sound in the Streets (Surface Battle) "Aboard the Peace and Quiet", by journalist Gutat Lupak. Pre-Battle Briefing from Data Master Bey’wan Pwua’Tua About the Ship: Meet the Crew! Additional Pictures for Judging Huge thanks to the other CFS players, who are a consistent source of feedback and good company. To be concluded in Part 3. -
Always loved the unique design of the Arwings from Starfox. Many cool Arwing MOCs already out there but with this I especially aimed for the classic blocky design from the original game (which is the best, imo) and I tried to keep it as small and simple but also as recognizable and playable as possible. Now that Lego has partnered with Nintendo a Lego Starfox franchise might be a thing?!?
-
This is my first Entry for the Oaken shield Task of the GOC-challenge. To Rear- Admiral Fletcher Commander of the Terra Novan Fleet As answer for your call for Gunboats for the colonies, I have been searching for a multi purpose light vessel. The result is a boat with six oars that can serve as a landing boat due to it's space for twelve soldiers or as light gun carrier with an experimental 12 pounder gun. With slight modifications the boat can get a very small mast and a sail but generally the boat is not supposed for that as it would destroy the very small silhouette. Fortunately it is small enough to be considered as side boat for larger ships, but still you can find instructions with this letter with which every shipwright should be able to replicate it. Your servant, John W. Jaeger Marine Lieutenant serving in Spudkirk There it is, my first ship Critique ver welcomed as this is new Land for me! Stay healthy!
