Search the Community
Showing results for tags 'scale'.
Found 81 results
-
[MOC] 1:16 Volvo FMX with Palfinger PK78002 SH
dikkie klijn posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The Volvo FMX is an oddly styled truck, its bulldog nose like design stood out to me instantly. Having an inherent weakness for the odd I decided to build one all the way back in 2015. Four years later I proudly present my latest model :). Developing the Palfinger crane took the better half of the development time for this model. In order to house all the electronics necessary a flatbed truck design was chosen with 4 axles, 2 under the bed and 2 to support the crane and cabin. The crane is operated by 3 servo-controlled pneumatic switches, the newer style switch allowed me to build this more compact than we ever could! The Pneumatic cylinders for the extension sections have been modified to allow for a more realistic reach. Two original cylinders were cut and acetone welded together for each one of them. The compressor is powered by an L motor and assisted by a rubber band to reach the pressures necessary to operate the crane. The crane is able to reach the back of the bed, as was my goal, but isn't able to lift much anymore then, the limit of pneumatic control is really stretched when a single-cylinder needs to push an arm of 30+cm on a point 5 studs away from the pivot point. With all this functionality, details are fun but also frustrating to add. Two tiny tool compartments have been fitted on the rear of the truck stowing away lifting equipment. The engine is only built for the upper 2/3 to accommodate for the suspended axles and steering mechanisms. The model is also fitted with a full custom led kit. A custom electronics board with an Arduino pro mini takes the signals from the Sbricks and converts them into turn signals, driving lights, hazard lights and much much more. More can be seen on the Flickr album and in the Youtube video! -
Just browsed through the forum and could not find this anywhere. Think I just forgot to share it. Mentioned her some time ago in the General MOC-Discussion, WIP-Help, and Teaser Thread. If she is hiding somewhere in the forum, I do hope someone has the chops to remove this topic. Scale 1:40’ish L: 150 cm B: 26 cm H: 114 Bricks approx. 19300. Looking back at my earlier designs I found that my version of the HMS Surprise, just like the HMS Ontario, was somewhat wanting. This is a model of the HMS Surprise launched as the corvette Unité in 1794. In 1796, The Royal Navy conquered, refitted and renamed her. She later on chased pirates in the Caribbean for several years. The ship plays a central role in the Aubery-Maturin stories. This includes the movie from 2003 Master and Commander: The Far Side of the World. The HMS Rose, which was later, renamed HMS Surprise, plays the “role” as HMS Surprise. Neat, but somewhat confusing. Being notoriously bad at taking photos of my creations there is some Renders below, these are also in the General MOC-Discussion, WIP-Help, and Teaser Thread. …but you need to look at the LDD file to get a view of the details of the creation. Find it at MOCPAGES http://www.moc-pages.com/moc.php/452403 She has been on display at LW Copenhagen 2019. A Swedish AFOL has taken some fine Pictures from the event on this link. Hope it is ok that I link to this https://www.flickr.com/photos/86394332@N03/47062421172/in/album-72157705321073761/ There are also some more photos including WIP at my Flickr page. https://www.flickr.com/photos/131641614@N06/with/46031790204/
-
The shire of Zamorah spands true a wast valley with the Mitgardian mountains to the north, in the east and in the west there is offshoots of the mountain going south. This surrounds the shire like a horse shoe. To the south there is rolling green landscape with farmlands and forest along the river going south. At the mountain ridge on the west border of Zamorah shire stands the twin towers of Anc' Dam. Old watchtowers built in ancient times long before Zamorah was there. In the old library at The Royal Cartographer's Guild of Albion there is an ancient script roll that tells of long forgotten times when a race, not much different from the orchs roamed these lands. The script roll tells of two twin towers built by this orchlike race. The twin towers stands on either side of a ravine in the western mountain ridge. The ravine has always been a natural way to cross the mountain offshoot. When Zamorah was built and the shire expanded this was a good place to fortify. A bridge was built between the towers and a fortified gate was built at the bottom of the ravine making it much harder to enter the Zamorah valley. The ravine and the gate The bridge then made the western mountain ridge one of the most popular ways to get up into the Mitgardia mountains. The bridge is therefore a heavily guarded tollgate between Mitgardia and Avalonia. A good income for Zamorah and a great way of controlling the traffic between the guilds. The guarded tollgate on top of the mountain ridge View from the north of the twin towers of Anc' Dam Location The twin towers and the western gate is located in the west of Zamorah Location of the western gate in my micro scale MOC of Zamorah Shot of the western gate from my micro scale MOC of Zamorah
-
Mercedes-Benz G-class 6X6 Trial edition
Aleh posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello dear friends! Please let us (yes, today - we are both with ADCchannel are the authors) introduce the latest MOC - today this is Mercedes-Benz G-class 6X6 Trial edition. This truck (definitely it is!) is our common project. I was always dreaming of creating my own implementation of this greatest version of legendary Gelandewagen. I build the body with pleasure and know that ADCchannel riched senior skills in building chassis for truck trial, so I offered hiw some kind of collaboration. Luckily, he immediately agreed. The main difficulty was that we are living in different cities, but not far from. So, couple of month were spent truck is ready. To be honest body itself is absolutely new. From my previous G class Mansory edition I took only front view and side doors. Roof, interior, body frame is completely new. Mandatory point was to create easily removable body. So, you can split body from frame removing only six axles (easy to remove). Some description, though :) This monster is propelled by 3 XL motors - one per each axle. M motor for steering and we decide to power truck bu Buwizz. But it's ready to use regular Lego IR receivers. Suspension has 3 portal axles like original Mercedes. We use 7 Claas tires (actually 6 + 1 third party). Everything what can be opened - is openable - hood, doors, trunk. Unfortunately there were no room for any V8 engine due to front suspension construction. First purpose was to build truck suitable for trial. Here are the two different(!) videos. Feel free to watch and comment. Any critics would be highly appreciated. Dimensions: - Wide - 25 studs, - Lengh - 72 studs Here are some photos from bricksafe page: https://www.bricksafe.com/pages/Aleh/mercedes-benz-g-class-6x6 Pictures will be uploaded in a couple of hours. Some technical issues for now. -
I built this for my "Midiopolis" topic over in the Town forum, but I decided to mention it here as well. The wheels are part number 38799 which at the moment is only made in white and is decorated for use as a tea cup saucer for a Harry Potter minifig. Midiscale BR Class 08 Shunter Midiscale BNSF 2099 Locomotive Midiscale Small Oil Tanker Midiscale Chicago Metra Cheers.
-
Hey! While working on my Resurgent-class SD I created this MOC. Started as tablescrap and turned out pretty well as microscale spacecraft SO - thats the reason behind the KASSIOPEIA Exploration Vessel. It roughly took me about 10 hours. Source1 Source2 Greetings Kommander
-
Hello Everyone, this is my first post here, so apologies if I made any mistakes! I was going to post this model on Lego Ideas, but (not surprisingly) Game of Thrones is not suitable content for them, so I decided to post it here and see what you guys think. This is a (not so small) scale model of the castle of Winterfell from George R. R. Martin's epic fantasy novel series A Song of Ice and Fire, and more specifically, a model of the castle as it appeared in HBO's award winning tv series Game of Thrones. In the series, Winterfell acts, (most of the time) as the home of house Stark, one of the main noble families in the fictional land of Westeros. Winterfell is seen often throughout the series, and stood out to me among all the other places in Westeros, not just because of its prominent role, but because of its unique design and architecture. Many of the castles we see in movies and on tv look amazing, with their numerous gold turrets, towers, large windows, and vast balconies, but all these features make the castles relatively unrealistic in an actual medieval setting. It is because Winterfell lacks these common features on fictional castles that it stood out to me so much. In the real medieval era, most castles were not very opulent, and had pretty plain, utilitarian exteriors. If you think about this, it makes quite a bit of sense, as putting all your wealth on the outside of your castle meant it could be damaged or stolen if you are attacked. I know, I know, most fantasy tv shows and movies aren't going for historical accuracy, including Game of Thrones, (I love seeing dragons flying around as much as the next guy) but that doesn't mean I can't appreciate when the creators do make things look as though they actually might in the given time period. I based this model off of the scale desktop model of Winterfell you can buy online (just search google for: Winterfell sculpture, and you'll see a few pages with it), and it includes all the main features of the castle, including the Winterfell Godswood, with the Weirwood tree and broken tower. I am quite pleased with the way the Weirwood tree turned out, its a new design that I haven't used before, maybe some of you have, but I hadn't, and so was quite pleased when I came up with it. Despite my best efforts, this is a large model, measuring approximately 2 feet by 1 foot, and comprised of 3046 pieces. If any of you want to build the model, a link at the bottom of this description will bring you to a folder with the full size images of the model, a bricklink parts list, a .io model file for the Stud.io lego design program (my personal favorite), and a .ldr model file for use with Ldraw. I do not have a .lxf file for use in Lego Digital Designer, as this model uses some newer bricks not in that program, so I apologize for not being able to offer that to those of you who use LDD. If you do build the model, please send me some pictures of it! As with my Hogwarts model, I don't have enough pieces to actually build it, so it would be awesome to see a real model if any of you are more fortunate with your LEGO collections than I am :). Also, feel free to share this with anyone you want and post images of it, as long as you remember to give credit to me as the model's creator, and provide a link back to this post. I will most likely be posting this model on Rebrickable as well, but I need to create instructions for it before I can do that, and that's the boring part of model making, so I'm procrastinating it :), A link to my Rebrickable page where you will eventually be able to find it will be posted beneath this description as well. And finally, here is the link to that folder with all the files mentioned above: https://drive.google.com/drive/folders/1pb0hN4USgPyKzkSvDyXeKFhb4Nkczwxq?usp=sharing and to my Rebrickable MOCs page: https://rebrickable.com/users/EthanBrossard/mocs/ and here are the images! winterfell lego with logo3 small by Ethan Brossard, on Flickr winterfell lego #0 small by Ethan Brossard, on Flickr winterfell lego #1 small by Ethan Brossard, on Flickr winterfell lego #2 small by Ethan Brossard, on Flickr winterfell lego #3 small by Ethan Brossard, on Flickr winterfell lego #4 small by Ethan Brossard, on Flickr winterfell lego #5 small by Ethan Brossard, on Flickr winterfell lego #6 small by Ethan Brossard, on Flickr winterfell lego #7 small by Ethan Brossard, on Flickr winterfell lego #8 small by Ethan Brossard, on Flickr winterfell lego #9 small by Ethan Brossard, on Flickr winterfell lego #10 small by Ethan Brossard, on Flickr winterfell lego #11 small by Ethan Brossard, on Flickr winterfell lego #12 small by Ethan Brossard, on Flickr winterfell lego #13 small by Ethan Brossard, on Flickr winterfell lego #14 small by Ethan Brossard, on Flickr winterfell lego #15 small by Ethan Brossard, on Flickr winterfell lego #16 small by Ethan Brossard, on Flickr winterfell lego #17 small by Ethan Brossard, on Flickr winterfell lego - winter small by Ethan Brossard, on Flickr Thank you in advance for any feedback/advice! Ethan
-
Getting started and strategy for the process
prepmaster posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, I am interested in building a 1/144 scale battleship. Does anyone have plans for your boats or a resource I could use to help myself make a 1/144 scale battleship? I can get blueprints and ship plans for the SS Suffren. This is the battleship I would like to build. I'd love to look at blueprints and any plans ya'll have for building boats so I can try my hand at it. I'll be honest, I haven't built MOC in years.... Like 15. I've built with plans and even eyeball like a puzzle with my daughters. Some of this is my own rekindled passion after taking the girls to legoland and getting them some sets to build. They like to build and marvel. That's fine by me. I did that some myself. Eventually, all my sets became part of the melting pot until my lot was sold. I don't know what it would cost to get a decent set of bricks to try and build an MOC. I went ahead and downloaded LDD to try and get started. I'm curious how well I can do with it. I'm also curious how I can go from a LDD model to purchasing bricks so I can display this like I would want to do. My end game is to build it and sink it in my aquarium to enjoy as a massive ornament. Is it possible to get plans for the pirate ships at the lego scale model exhibit? Those were awesome! The blueprint shows the full hull. The top is water line up from the side and the bottom is in action renamed in 1944. I don't think this ship class was ever bedazzled but if anyone has experience with dazzling or can offer to the idea for an MOC, I'm all ears. -
[Instruction] UCS First Order Resurgent-class Star Destroyer
Kommander posted a topic in LEGO Star Wars
UPDATE: Instruction avaiable - at BrickVault UCS First Order Resurgent-class Star Destroyer by Kommander, auf Flickr Size: 109cm x 52cm x 25cm Parts: 7855 LEGO STAR WARS UCS FO Resurgent-class Star Destroyer Render by Kommander, auf Flickr UCS First Order Resurgent-class Star Destroyer by Kommander, auf Flickr UCS First Order Resurgent-class Star Destroyer by Kommander, auf Flickr And some instruction pages. Instruction by Kommander, auf Flickr You can find more pictures HERE Original post: Hey Eurobricks I wanna share with you my new project - a First Order Resurgent-class Star Destroyer in UCS-scale. To avoid another long time MOC in WIP Nirvana I started this time with little help from LDD. Dimensions, main frame, angles... took me about a year to set these parts. Because of the LDD file I generated instructions and and part lists for me. On the picture you can see an early version of the ship and one of the latest with much more details. For the moment only one digital render of the ship. There will be some adjustments/tweaks in the "real" version but most of it works fine for me. I already finished the main frame with the instructions... and its good! More pictures will be on flickr Greetings Kommander -
Komatsu Forest layout in American style. I've built this layout last year. Built in minifig scale (1:45). Contains a Komatsu PC210LL-10 forestry excavator, PC240LL-10 log loader. Both of them have several functions from the real machines. The layout also contains a Peterbilt 389 Classic with custom Manac forestry trailer. Pictures: 01_Komatsu_layout by Mathijs Bongers, on Flickr 02_Komatsu_PC240LL-10 by Mathijs Bongers, on Flickr 04_Komatsu_PC210LL-10 by Mathijs Bongers, on Flickr 05_Peterbilt_389_classic_with_custom_Manac_forestry_trailer by Mathijs Bongers, on Flickr 01_Komatsu_PC240LL-10 by Mathijs Bongers, on Flickr 08_overview_functions by Mathijs Bongers, on Flickr 01_Komatsu_PC210LL-10 by Mathijs Bongers, on Flickr 09_Komatsu_PC210LL-10_functions_overview by Mathijs Bongers, on Flickr I've made a selection of picturs which I've posted. More pictures on my Flickr page: I hope you like it :)
-
FORD GT - Jaap sticker package ready
Lox Lego posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This Ford GT is the ultimate expression of form following function. Its teardrop- shape body is the result of extensive work in the wind tunnel. Its carbon-fibre body and its 600-plus horsepower 3.5L EcoBoost V6 engine are the ultimate expressions of technological innovation. Flickr: https://flic.kr/s/aHsm7qSxrk Hello Ford and Technic addicts! Thorsten has completed professional instructions for the Ford GT. It might be time to disassemble your 42056 Porsche Kit and build this orange replica of the 2017 Ford GT! Avail at Rebrickable, check it out! Rebrickable: https://rebrickable.com/mocs/MOC-10792/Loxlego/ford-gt Flickr: https://www.flickr.com/gp/139930963@N04/83f95A Video: https://youtu.be/bV8_uOz50oU Ford GT - race car for the road ? by lachlan cameron, on Flickr This supercar packs RWD driven by 2 XL-Motors, Servo for steering, pushrod-actuated torsion bar style suspension front and rear, Sport and track mode suspension, V6 engine, Sbrick plus, Rear spoiler with manual lift, 2 M-motors (1 for each door), button to turn on the car under the hood, easy battery access. Ford GT - From drawing board to reality ? by lachlan cameron, on Flickr Nothing about this build was easy. This car had so many new things that I've have never accomplished before. To start was the framework. I was worried this build would be too heavy for the pushrod suspension. Each wheel has 2 inboard shocks that are positioned in the same fashion as the real Ford GT. Ford GT - door mechanics - filter shot by lachlan cameron, on Flickr I really wanted to have the doors open the same as the real car and this is where difficulty started. Opening those huge, heavy doors was a small feat in itself. The pressure required to pop the door to the final position upwards is immense, so I has to seriously gear down the axle. Ford GT - doors by lachlan cameron, on Flickr The next challenge was the motor placement. Man was it ever hard to fit everything inside a tear drop bodywork! I had to use the middle of the seats for the Sbrick, which may not look too cosmetically appealing, but I can assure you it did completely strengthen the framework immensely. (this may be my sturdiest frame I've made) IMG_0043 by lachlan cameron, on Flickr Lastly, I kept the Veneno to race the Ford GT as they have identical gearing. If you watch the video, you'll see who wins. I will work with Thorsten as well for professional instructions in the future. Ford GT back view ? by lachlan cameron, on Flickr A big thanks to @brunojj1 for suggesting to place more studs between the wheels. I tried it this time (2 extra studs) and I feel it looks proper. thanks! Ford GT - white room - filter by lachlan cameron, on Flickr -
AMELS 180 Limited Edition Superyacht build at the scale 1 to 53
Edwin Korstanje posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
A couple of months ago i give you some sneak preview of the superyacht i was building. it's build in commission for the brooker of the real ship as a pressent for his client and stand with pride on the real one. The real yacht is build by the Dutch AMELS yard in Vlissingen and is 180 feet (55 m) long and custom fit out. I got only two months deadline to build the model, with just over 14000 parts and is 1.03 meter long and my doghter helps me with some part of the build. Also whe got a great tour together on the real yacht and got a trip whe never forget. -
After some month of building I like to show you my latest MOC: A Mercedes Zetros 6x6 truck. It is a ~ 1:13,5 scale model of the Mercedes Zetros 2733. All functions are Full RC. It is 69 cm long, 21 cm wide and has a height of 27,5 cm. The weight is 4553 g. As battery I use the BuWizz. The Zetros is remote controlled by 4 Sbricks via iPhone. Functions and used parts: Propulsion: 4 Lego Technic Buggy Motor Steering: 1 Lego PF Servo Diff Locks (front / rear axles + central lock): 1 Lego PF Servo 4 Lego Pneumatic V1 + V2 1x5 (Automatic) Compressor: 1 Lego PF L-Motor 4 Lego Pneumatic Pump (V2) Winch: 1 Lego PF L-Motor Telescope Crane: 1 Lego PF M-Motor 3 Lego PF Servo 3 Lego Pneumatic V2 Cylinder 2x11 2 Lego Pneumatic V2 Cylinder 1x11 Outriggers: 1 Lego PF Servo 1 Lego PF M-Motor 2 Lego Pneumatic V2 Cylinder 2x11 Lights: 10 pairs Lego PF LED plus several Lego extension wires Some more highlights: Full independent Multi link live axle suspension Portal Axes Planetary Gears Working head lights, rear lights and flood lights Working turn signals and warning lights [/url Edit: I nearly forgot some special picture pair ;) [/url] Second edit: I corrected the scale which I'd miscalculated. -
Hi guys! At least I has finished my next MOC and want to introduced the finished model to all of you! Welcome my International Lonestar truck! It's dimensions are: - Lengh: 101 stud or 80 cm - Width: 31 studs or 25 cm without mirrors - High: 37 studs or 30 cm excluding antennas and exhaust pipes. It consists of more than 5000 Lego parts, including 9 motors. It has: - Great Charbel's 8 speed gearbox, modified by me to the 16 speed one by adding high/low gear to the main output. It has a special shifter. It's all RC. - Independant powerfull pneumatic brakes on each wheel. Inspired by Sheepo's Peterbilt. - Pneumatically controlled fifth wheel. - Independant suspencion on front and dependant one on the rear axles. - Suspended driver's and passenger's seats, doors with locks and shock absorbers. - Detalized interior. - Inline 6 cylinder engine like the real truck. Power functions is described at the picture below, I think this is more interesting than just to read. Also I include pneumatics sheme. Enjoy the pictures please, I hope some video will apear nowadays. Unfortunately, rear differentials can't cope with such a huge torgue and truck cant drive fast on the floor, sorry. Please visit my Bricksafe page for more photo. Building instructions are available here: https://rebrickable.com/mocs/MOC-9788/OleJka/international-lonestar-truck/#comments VIDEO AVAILABLE NOW!!
-
1/43 Small Scale Cars
Ron Dayes posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey there, just noticed the scaleres finally got their own forum which is great news When it came to my small scale of 1/43 its always been kind of on the edge of being somewhat "good with minifigs" yet not really made for them, so i mainly posted into town forum despite them not being the standard town cars apporach. The figs mainly serve as a size relevance here. 6 studs is 2m. A minifig is 1,7 m high. Now onto some pictures of my recent ones, i hope you enjoy :) Ferrari on model stand by Ron Dayes, auf Flickr Ford Speed Champions by Ron Dayes, auf Flickr Familia Lamborghini by Ron Dayes, auf Flickr ambulance US by Ron Dayes, auf Flickr Vintage Racing Porsche by Ron Dayes, auf Flickr Sports SUV by Ron Dayes, auf Flickr T3 German Ambulance by Ron Dayes, auf Flickr A Smart choice 1 by Ron Dayes, auf Flickr VW T1 redesigns by Ron Dayes, auf Flickr -
[MOC] Goldhofer AST-1X 1360
Uranox posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Today, I would like to share my first creation on Eurobricks with you all. A model of a giant towbarless Pushback Tug. To be exact, the Goldhofer AST-1X 1360. The real vehicle can lift up the front landing gear of the biggest aircrafts. I tryed to build all the functions, how they are build in the real Goldhofer, especially with the rear steering. The model has 8 RC functions:- Front wheel drive (XL Motor)- Front wheel steering (M Motor) - Rear wheel steering (2x M Motor) -- I had to decide, whether I would like to have crab steering or steering with different wheel angles to allow smooth driving. In the end I've chosen the second option, because crab steering is still kind of possible.- Raise cabin (M Motor)- Pneumatic pump (L Motor)- Raise landing gear (L Motor)- Close lid (M Motor)- Fix landing gear (M Motor) Unfortunately, the model has some flaws. The cabin is lifted in a weird way, because of the battery box under it and I struggled with the lifting section. I had to use really strong clutch gears and worn out valves, and even with that, the valves didn't switch always. Also I had a problem with one of the pneumatic cylinders, the reason why I used two pumps. As a result I had to glue two 2L axle between the pumps to the red 1x2 thin liftarms because of the vibration. I was sick of searching for another solution . Here is a quick render, made with LDD and Bluerender. Images with higher resolution on Flickr: https://www.flickr.com/photos/151347462@N05/albums/with/72157684495359644 I already took the model apart, but l would still love to hear your opinion, some tips or criticism. Maybe I'll give that model another go in the future. -
[WIP] 1962 Ferrari 250 GTO-seats, rear axle, gearbox
Alex Ilea posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello guys ! I am happy to start this new project (thought I haven't finished the other car ). So far I built the front suspention and the grille : And with tires : If you are wondering what is with those dark bluish gray beams, well, that is the maximum distance at where the engine can be placed relative to front wheels. @Sariel's scaler said that this car is in 1:8,3 scale . Please , you see anything that can be improoved just leave a comment :) LDD file is coming soon, just need to finish it (first time I use LDD so it will be interesting) . IA creations -
Edwin Korstanje scaled custom construction kits
Edwin Korstanje posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi friends, You know me for my big scaled one of a kind ship models that i build in commission for ship onwers and shipyards and have build many of them, but the most time i create and design and liver very exclusive construction kits for my clients. The last 3 year i have created more than 10 different kits and sold a couple of Thousand of them. My designs with the construction kits are nothing, without the great work from my great friend JunkstyleGio for all the renders and instructions and Jaap Technic for his sticker sheets. This year is a very busy and the first 4 sets are ready to deliver out and here is the first sneak previeuw of the first construction kit that is gona be deliver to a client in Brasil this week. It's a Tugboat that is build at the scale 1/87 and have 1457 pieces and is for my client a new build tugboat that is liver by Damen shipsyard design 2412, build in Brasil and is sailing in the second week of August. Here are the first pictures of the construction kit and later on more news of her. I hope you like it, and this is a set and not a one of kind model where i can go mad in details. And JunkstyleGio and me make a joke in the disclaimer and the client must laugh very much on it and have to stay in the final printart. Regards, Edwin -
I have built a C7 Z06 fully customized to street racing spec. Please leave any comments that you want. Thanks @StangMan302
-
i've just finished working on my microscale build of petra which i have submitted to ideas, any support and/or feedback would be great this project can be found on lego ideas
-
1920's ocean liner "RMS Acadia" (micro-scale ship MOC)
Murdoch17 posted a topic in Special LEGO Themes
Way back when (around 2010) I designed this ship as a standalone piece for my desk. I spent about $120 USD on Pick A Brick from the online LEGO shop & from 3 Bricklink sellers. (I later found I could have saved a bunch of money by going through Bricklink alone.) Since it's original construction around seven years ago, I have added another brick layer to the ship's base and 18 studs of length to for decks. The model is in micro scale, and sits about 114 stud long, which is very close to three feet long. Printed 1 x 1 tiles should spell out the name ACADIA on the left and right sides, and on the rear of the ship. (The tiles haven't been ordered yet, should be bought by the eighth of this month) The font of the ship. (also called the "bow".) The rear of the ship. (also called the "stern".) The raised portion of the deck is for the docking bridge when the ship is in port. The left hand (or port, and the right side would be the starboard side.) profile shot of the vessel alongside a yard stick. This ship is just a hair longer than three feet long, or 114 studs. This has officially become a Seriously Huge Investment In Parts, or SHIP! This is the red star line flag, and below is the fictional history and statistics: The RMS Acadia was designed in 1914, but World War One prevented it's construction by Steele & Sons Shipbuilders to start until 1919. The ship was modified from it's original design to burn oil, and was completed in February 1921. The ship could hold 3280 people total, with 1140 being Crew, with 270 being First class, 530 in Second class, and 1340 being the steerage, or Third class. The ship sailed it's maiden voyage in July 1921 from Southampton to New York City. The ship was English, and as such, was immune to American law of Prohibition. The ship took off-season sailings (informally known as Liquor Cruises) around the Atlantic, returning to the port of origin within a couple days. The ship managed to hold a steady service record, and remained relatively full-up until the Great Depression really took hold in 1931. The ship's owners, the Red Star Line, managed to stay financially afloat long enough to get the ship through the worst of the Depression, until the ship was requested by the English Navy as a troop ship in late 1939 for use in World War Two. The Acadia's fancy woodwork was put in storage and the ship was turned into a troop ship relatively quickly. The ship was strafed several times by enemy aircraft during the war, and narrowly missed being torpedoed in 1943, but it survived the war not too much worse for wear. When it was handed back over to Red Star Line, it was given a complete overhaul mechanically and electrically. The whole ship was rewired, and the oil burning engines converted to diesel. The Acadia's woodwork was painstakingly restored to it's original grandeur, and she was ready for for sailing by 1948, almost a year after being handed back to it's original owners. In the early '50's the ship began sailing luxury cruises to the Mediterranean from England and the United States, in addition to it's usual scheduled Atlantic crossings. The ship began showing it's age by the late 1960's, when it's original glass dome began to leak badly. A handful of cracks in the reinforced glass caused the ship to be dry-docked, but before it could be fixed the huge dome collapsed in on itself, causing the grand staircase to be heavily damaged. Luckily, the accident happened in the middle of the night, and no one was on board at the time to get hurt by all that broken glass. The ships' dome was replaced, but only because the ship's owners knew of it's heritage and couldn't bear to see the old girl scrapped. (Not to mention it would have cost more to scrap the ship than fix the dome) By 1975, she was last four-stack ship in existence, and the owners were planning the Acadia's 55th Birthday for the next year. The Acadia celebrated July 1st, 1976 as her fifty-fifth birthday, and as part of the celebrations she was given to a preservation group dedicated to keeping the ship sailing as an "ambassador of history", as a peek into the way things were and how the men and women visiting and working on the Acadia went about their lives through each period of this ships stoic history. Many former passengers and crew detailed their experiences on the ship in writing or on film for the beginning of what later became known as The Acadia Living History Museum. Today, the ship features a feature-length film that chronicles the story of the ship and it's many passengers and crew through out the ships commercial and wartime lives. The film is shown in the Second Class movie theater, built into the ship in 1947 after World War Two, flowing seamlessly into the 1920's flavor of the ship. The ship still sails, making stops in New York and London (substituted for Southampton) at least twice a year. Ship Name: RMS Acadia Ship Type: Atlantic Class Passenger Liner Owner: Red Star Line Ship Built: 1919 – 1921 Capacity: 2740 passengers, 1340 crew (3280 persons total) Lifeboats: 60 boats with 60 people per boat (3,600 people total capacity) Builder: Steele & Sons Shipbuilders Propulsion: 24 Boilers, 2 turbines, 4 steel propellers Top Speed: 28.5 Knots Fuel: Diesel (originally Oil) The LDD file for the updated digital version is here. Any thoughts, complaints, questions or suggestions are always welcome! -
Hey fellow Lego fans! It's me HDB, and this time I have a spaceship tutorial. This one is a corvette sized spaceship. If any of you like the vid, then drop a comment down below. Thanks for watching! HDB out!
-
What do you think.. are the Speed Champions just a tiny bit too big for a Modular Building Layout, or do they fit in?
-
[MOC] Liebherr LTM 1090 4.1 - Sarens
dikkie klijn posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
September 2013 the first WIP picture of my crane was uploaded, now 3,5 years later I dare to say the model is finished. In all these years I have faced a lot of technical challenges with this model, thought most of them are solved a few remain annoying (steering and drive). In the end I consider the model done and decided to learn from the not fully working features to improve on in later builds. Other tough challenges that were beaten in this model are: Fully capable outriggers that lift the complete model of its axles, Lift of the boom using a brick build linear actuator, fitting tens of meters of wire in the model to power all the led's. A full list of the features can be found at the end of the post. Even though I consider myself quite a purist a few elements of this model are not from TLC. For control the model uses 5 sbrick's together with a custom profile, enabling all the rc features I needed with a good signal . Since the PF led's are way to expensive and dull I decided to solder my own led's with the right color and a good brightness. The stickers are supplied by JaapTechnic. More pictures can be found on my flickr Full road configuration with 14.4 tons of ballast weight. The spreader plates are stored on the back. All the light are controlled by the Sbricks, this includes the indicators, beacons and reversing lights. Yes this actually lifts. With the jib mounted the piston is able to erect the then 1.7 meter boom to full height. Fully erected the model stands 2.6 meters tall. Even though the model faces a lot of technical challenges all of the details are added including full interior in both cabins. Full feature list. Motorized functions: Drive, Steering, Outriggers front and back, Compressor for the outriggers, Slewing, Boom lift, Boom extension, Winch, Cabin lift. Light functions: Normal driving lights, indicators, hazard lights, beacons, reversing lights, working lights on the superstructure. Other functions: All cabin doors open, Openable storage doors on the back, Full suspension, Folding jib with multiple angles, Folding safety railing. -
[MOC] Peterbilt 379 & Polar Tanker (1:13)
Bricksonwheels posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Well, it is great to see a forum dedicated to scale modeling, so its not more then fitting to put my latest work here: A Peterbilt 379 with Polar tanktrailer. A large (1:13) scale Lego tanker combo had been on my list for a long time. I made a small 1:22 Kenworth cabover with milktrailer in the past, and had plans for a 1:16, but in the end started work on a full 1:13 scaled combo. My 2012 dumper combo was getting old, and I wanted something new to bring to shows as well. Now I wouldn’t be myself not to take a new build a bit further again, and this one should be extremely detailed, coloful, and fitted with lights. Once more I hooked up with my good friend Rob from Brickstuff.com, and this time we didn’t make compromises. We even added a custom controller/effect board, powered by a USB Varta 10400 mAh powerpack that is located in the sleeper! There are lights everywhere including over 60 driving / contour lights, but as a special feature the underside of the chassis of both tractor and trailer are equiped with over 180 RGB LEDs to simulate the glow effect seen on showtrucks. This really gives amazing effects. A custom remote control is split into two channels that control the contour lights and the underside seperatly. Effects include color changing and strobes. It took me 5 months to build this truck and some 9000 bricks went into this, including electro-plated chromed bricks by Bricks4all.nl. My buddy Jaap Kroon (Jaap Technic) printed the stickers for me, a job well done! And a shot in the dark: A video is on my flickr stream: https://www.flickr.com/photos/bricksonwheels/
