Search the Community
Showing results for tags 'moc'.
Found 5705 results
-
Minerva is a fast frigate whose sole purpose is to keep the Oceans safe from those Pirates, and dare I may say a ship that has been sorely missing in the LEGO World. She comes with 12 Minifigures and one small cat to keep the food supplies safe from rats. Please Vote Now () at BrickLink.com if you would like for her to be produced as part of the BrickLink Designer Program: https://www.bricklink.com/v3/designer-program/series-4/1451/Imperial-Frigate-Minerva Minerva is a highly efficient design, which is to say that it does a lot with its 4000 pieces. Although the design is ambitious, I have paid close attention to making it as buildable as possible. What I can definitely guarantee is that you’ll come across plenty of interesting techniques as well as those sweet moments where sections come together and fit just perfectly - just have a look at Minerva’s stern. Minerva has several features that make her highly playable and friendly to Minifigures, as demonstrated in this video: Please Vote (): https://www.bricklink.com/v3/designer-program/series-4/1451/Imperial-Frigate-Minerva Thanks a lot!
-
Sets and MOCs - Do you replace parts with redesigned ones?
AmperZand posted a topic in General LEGO Discussion
When LEGO releases new parts that are more appropriate than existing ones, do you update your sets or MOCs with those new parts? For example, in 76202 Wolverine Mech, the legs are offset with one slightly in front of the other because there was no part at the time of the set's release that allowed you to have both hips in line. With the release of the 1 x 2 plate with ball connectors at both short ends (below), that's no longer the case. I have updated my mech with that part (and a 1 x 2 plate in dark bley to fill the gap). I also replaced the mech's finger and thumb parts with a bunch of these that are also new-ish: Do you update sets/MOCs or do you leave them as they are? -
Introducing you to my latest Midi-Scale spaceship, the timeless Y-Wing from Episode IV - A New Hope! At 546 pieces, this compact and intricate model is barely wider than your average smartphone's height, but keeps a dense, detailed look and accurate proportions. I initially made a first prototype more than a year ago but was unhappy with the half-baked, almost playset-ish scale. I took on the challenge again and recreated it entirely from scratch: it's now smaller, more accurate, and just better in every aspect. Despite the small size, I did my best to capture the essence of the original ILM prop: tilted cockpit section, engines off-center relative to the thin support struts, asymmetrical greebles from top to bottom, cockpit turret... Believe it or not, the deceptively simple shape of the body was not easy to capture at this scale: with such a tiny surface to work with, a subtle balance had to be struck between incorporating complex greebling and "drawing" an accurate body outline. The cockpit section was a whole other beast, but once I figured out how to create the tapering, things clicked pretty fast. I managed to reproduce the slight downwards tilt, the yellow stripes on the fuselage, and the more discreet gray stripes on each side as well. I believe it's about as small as you can go when creating a Y-Wing cockpit without sacrificing crucial features and proportions! This model comes with a removable stand. Although it being purely a display piece, its swooshability is very good. In addition to being cost-effective, I think it makes a nice desk model for anyone loving that ILM prop look, with a small space footprint. ► Instructions for the Y-Wing are available at BrickVault! More pictures on my Flickr page.
-
.thumb.png.ac42fe5bf808b68722d021abc3bc5691.png)
[MOC] 1970s rc rally car
Aurorasaurus posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Inspired primarily by the Opel Manta 400, I've made my own RWD rally car. It features independent front suspension, and a rear live axle using the big ball joint and a metal U-Joint. Its propelled by 4 buwizz motors and steered by one C+ L motor. Some late WIP photos Earlier WIP photos Problems Because of the narrow wheelbase and relatively high center of mass due to high up buwizz units, the model easily rolls when driving at high speed and cornering. I was lazy with the design of the suspension; the front is too soft and the steering is inaccurate because I am using Instead of the newer parts with longer arms for steering links. This allowed me to fit the wheels inside the body, though. The rear suspension is too hard primarily because I got lazy and wanted it done, after about 8 hours on the model I was getting bored. The bodywork has some parts that could be white if I had the parts in white, but those parts are quite small. If you have any questions, feel free to ask. As of right now I still have the model assembled. Thank you for reading. -
Hello people! I want to start showing you some of my latest models, it's quite a lot of time I don't share them here. This is an Iveco T-Way, full RC with PU motors and hub, controlled via Brickcontroller2 and a Joypad. It is equipped with suspensions on all axles (pendular on the front axles and pendular in 2 directions on rear axles). The drive motor is directly connected to rear axles (it "moves" together with the third axle). Stickers are self made. This model is a mod of my original static model, in grey and black version, which features Hog steering, rear pendular suspensions, fake engine and tipping body. Instructions available here: https://rebrickable.com/mocs/MOC-121004/technicprojects/iveco-t-way/#details
-
Hello Creator and Disney fans, Mickey Mouse is a legendary American cartoon character co-created in 1928 by Walt Disney and Ub Iwerks. Steamboat Willie is a 1928 American animated short film directed by them. It was produced in black and white and this cartoon is considered the debut of both Mickey and Minnie Mouse. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-171558/_TLG_/mickey-mouse-steamboat-willie This is a studless model and everything is brick-built, stickers are not used. I wanted to create a clean model which is as accurate as possible in this scale. It includes many typical details: the shoes, the pants with buttons etc.. Maybe the most challenging one was the head with some tricky build techniques. Thanks for visiting, _TLG_ Mickey Mouse, Steamboat Willie - Instructions 01 by László Torma, on Flickr Mickey Mouse, Steamboat Willie - Instructions 02 by László Torma, on Flickr Mickey Mouse, Steamboat Willie - Instructions 03 by László Torma, on Flickr Mickey Mouse, Steamboat Willie - Instructions 04 by László Torma, on Flickr Mickey Mouse, Steamboat Willie - Instructions 05 by László Torma, on Flickr Mickey Mouse, Steamboat Willie - Instructions 06 by László Torma, on Flickr
-
For more photos and a 360 degree video, please check out my Flickr: https://www.flickr.com/photos/legoadam/
-
Dodge Challenger SRT Demon
CrazyKreations posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hey everyone, here is my newest creation... An 850hp supercharged BOAT!!!! AKA the Dodge Challenger SRT Demon!!!!! It is made using the parts from both 42154 and 42126. I liked this car and wanted to design a model that would highlight a similar and recognisable look! Please let me know what you think about it! Some photos and features: Front and rear View \ Wheelie function which is accessed using the orange key Doors, boot and hood can all be opened Please enjoy a video I made: https://youtu.be/TNrUjsT_23U?feature=shared Now on rebrickable: https://rebrickable.com/mocs/MOC-171570/CrazyKreations/dodge-challenger-srt-demon/#details -
Hi! After a long time, I'm back with my 4th project from the Minecraft world! The Mangrove Swamp I've been planning to build this biome for a long time, but I've been busy with Castle lately. I prepared the terrain design in the game and it was waiting for its time for several months, which has now come! :) This is my first Minecraft project this year, and there will be many more. I'm slowly building the next one, it will be something completely new The construction process is available in my video, link below. How do you like my Mangrove Swamp?
-
[MOC] 42167 skip loader truck
TechnicMOCer posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
My alternative model of 42167 Mack LR set - skip loader truck. It features HOG steering and detachable container which can be loaded/unloaded. -
Through the Jungles of Yucatan Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr Through the Jungles of Yucatan, 1519 by Nicholas Goodman, on Flickr
-
Hi everyone! With this new year 2024 I want to start presenting you my latest work, the result of 3 months of work in autumn 2023. It represents a stone bridge with a stream, a dirt road, a couple of small waterfalls and a water mill. All set in medieval times. In 2018 I had built a Medieval Windmill and knew that one day I wanted to expand it. In 2023, however, I was inspired for a much larger and more ambitious project, namely creating a Medieval Village! The village has been divided into 6 modules (for the moment), the windmill therefore represents the first completed module, while today I present to you the second module. This latest moc is based on 4 32x32 baseplates and is made up of approximately 7500 pieces. The water mill also has movements operated by a lever or interchangeable with LEGO motors. The roof of the mill is divided into two opening sections which allow you to observe the internal details, such as the rotation mechanism of the blades and the grain mill. On the upper floor there is a fireplace with some chests and a sleeping room for the baker. On the dirt road I positioned a horse-drawn cart with two Black Falcon soldiers. The whole thing is completed by lush vegetation with a forestman on lookout on a large tree. I hope you enjoy my latest work and stay tuned soon for module #3! SDRnet Flickr Gallery: https://www.flickr.com/photos/sdrnet/albums/72177720314195257/
-
This is the most photographed house in Leiden, Netherlands. I often see this house on my bicyle if I cycle towards the center. It was built in 1612. The city carpenter's yard (stadstimmerwerf in Dutch) was located on the edge of the city expansion that was built from 1611 onwards. The city carpenter lived and worked in this building. It is an old typical historic Dutch house. More city mocs: Instagram
-
Hello Creator and Disney fans, Mickey Mouse is a legendary American cartoon character co-created in 1928 by Walt Disney and Ub Iwerks. The longtime icon and mascot of The Walt Disney Company, Mickey is an anthropomorphic mouse who typically wears red shorts, large yellow shoes, and white gloves. This is a studless model and everything is brick-built, stickers are not used. I wanted to create a clean model which is as accurate as possible in this scale. It includes many typical details: the yellow shoes, the red pants with white buttons etc.. Maybe the most challenging one was the head with some tricky build techniques. Thanks for visiting, _TLG_ Mickey Mouse - instructions 1 by László Torma, on Flickr Mickey Mouse - instructions 2 by László Torma, on Flickr Mickey Mouse - instructions 3 by László Torma, on Flickr Mickey Mouse - instructions 4 by László Torma, on Flickr Mickey Mouse - instructions 5 by László Torma, on Flickr Mickey Mouse - instructions 6 by László Torma, on Flickr
-
(Afoland Castle Game. Meronia) The marketplace has always been one of the busiest places in the city. Here you can find anything you want - from food and equipment to adventures on your head. More pictures:
-
New project is ready! This time something from Ahsoka series: Shin Hati's RP82 Fiend Fighter The build took about 3 weeks, and it was great fun There are 561 pieces here, and one stickers sheet from set 75364 Instructions is available on Rebrickable! https://rebrickable.com/mocs/MOC-168389/EDGE OF BRICKS/shin-hatis-rp82-fiend-fighter/#details more about this MOC on my YouTube channel - Edge of Bricks How do you like it?
-
This short animation was made in 24 hours for THAC 2024 contest. THAC is short for The Twenty-four Hour Animation Contest. This is an annual international event for fans of stop-motion animation. I've always wanted to participate but never had the free time. This year I managed to do it. What does it look like exactly? Read more » Video: Some stills: Full story here: LEGO Gallery - [BRICKFILM] Stop motion animation for THAC 2024 WIPs, Behind the scenes and other extras at my: Instagram | Facebook | Flickr -
I based this vintage dump truck MOC off the Moving Truck GWP (set 40536) from last year. I made the cab 6 wide and added a new back half. Two each of these brackets are missing from the LDD file: 36841 in black is needed for the front bumper 36840 in yellow is needed for the headlights The rear of the dump truck with the bed lowered. The MOC seats two figures, while the cab doors open and the bed raises to dump the load. Free LDD file available at Bricksafe. Thoughts?
-
My first ever true Minifig-scale ship is finally here, and what better model to start with than the sleek BTL-B Y-Wing from The Clone Wars series. Being 23 meters long in universe, this accurately Minifig-scaled MOC is quite a unit: 57 cm long, 1,6 kg, 2,954 pieces. It can accommodate two clone pilots - one in the cockpit, the other in the turret. The model is available in three versions: classic (yellow), Rex's (blue), and red. With a spaceship of this kind, the main challenge is to achieve a level of smoothness and fluidity that gets as close to the original as possible. Using the Battlefront II model as a reference, my goal here was to closely match all key features of the ship: the subtle downwards angle on each side of the body, the curvy and tapered front section, the continuous yellow stripes that run across the entire fuselage, the intricate middle-section... and for such a smooth ship, going full SNOT (from top to bottom!) goes without saying. The T-shaped body of Y-Wings usually allow for simplistic structures, but in this case, figuring out the internals was one of the truly head-scratching parts of the build, since I had to properly incorporate angled fuselage assemblies and make a proper interior for Minifigs. Even so, the model is very swhooshable and can be grabbed from the underside, from the rear or even from both wings. Each color variant is accompanied by its specific set of instructions and parts list, giving you the freedom to build the one you prefer. The ship has two display modes, "in-flight" with its fully removable stand, and "landed" with retractable and easy-to-connect landing gear. The swooshing can begin. ► Instructions for the BTL-B Y-Wing are available at BrickVault! More pictures on my Flickr page.
-
Jorgeopesi´s WIPs and sometimes even MOCs
jorgeopesi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I decided to do this thread because I am tired to open new ones again and again, so enough speaking about me lets go for the almost MOCs. It seems that we are on dumpers time because I am working on this massive small truck. It will be very simple, only 2 axles steering and bed tipping but I had some problems... the angle and weigh of the bed due the lack of room when the steering work, bed itself also was a problem with technic parts and the scheme color will be a imposible to solve problem at least for the real MOC. I think I do not have to say which the truck is. -
Hello. I have wanted to make this ship for ages. I initially wanted to make it in midi-scale like all the others that I have shared here so far, but i quickly realized that in order to get the right shapes and curves to this ship I needed to go bigger. So I cannot call this a midi-scale build, but its not UCS scale either, so not to sure what to call the scale. I think it is close in size to the playset LEGO made, perhaps a bit bigger. This ship has been a big challenge, all the curves and subtle angles have been really difficult to get right, but I am quite happy with how has turned out. well its not quite finished yet, it is still work in progress. Thank you for your time!
-
[MOC] german water castle Raesfeld - minifigscale 1:50
maydayartist posted a topic in LEGO Historic Themes
Hey there, it´s a veery long time since my last visit here at EB. The last 9 years () were full of children, construct a house and after all, design a new Lego room with shelfs wooden boxes and a long period of time to sort all my unsorted pieces a long time ago. And here we are! I returned building in september 2022 and finished my newest build last week. Now I have done some pictures to show and compare it with the original located in my home village. The start for this castle was in 2015 but only for few month. After this the tower including the first step of the roof was waiting seven years for continuing. So overall the building time was 1,5 years. The measurments are: LxBxH 1,6 x 1,4 x 1,25 m and the amount of parts are round about 70.000 Like always (my old threads speak the same language ) I have made a lot of pictures. Sorry for that, but there is a lot to show and discover. The following pictures are good to compare And here are some additional pictures for details and overwiew. This three pictures show how the roofs are made. The last two ones are made with a normal light chain inside. thanks for viewing Phil -
Hello fellow EB members. My latest MOC is called Atom Bowl. It's inspired by mid century architecture. I had intended to make it full on Googie but couldn't quite replicate some of the wild shapes prevelant in that style such as boomerangs. I spent most of the my time working on with the 'ball return' and diamond pattern. Couple of pictures; They are also found as usual on my flickr page: here All the best for 2024! Andrew
-
Well, it's been a while... 8 years since I posted here. I present to you St.Miguel - a real Armada Flagship. It is inspired by Spanish galleon St.Martin, which was a flagship of a Great Armada (google it, if you want). Sails are fabric made and handpainted. Almost no illegal techniques were used. More in Brickshelf gallery Ahoy!
-
Hi everyone, I present my latest MOC: this small cargo shed! It's packed with lots of details, which you can view below. Thanks for watching!
