Search the Community
Showing results for tags '42126'.
Found 7 results
-
I looked here and there at all the alt models and mods for the Raptor. I appeared like there wasn't many options left. Then it hit me. A Camper! They make slide in campers for trucks and they even make them for the real Raptor. So I got to work. It's not Lego standard of detail, but I'm happy with the outcome. It is provided with the following features: A stove A sink A refrigerator A vertical storage area A place to sleep A shower No toilet. You got to poop in the woods. A hole to extend the steering knob on the stock truck. I had to widen it two studs on each side because when looked at the real one more, it was a little wider then I had built. It's not a complicated build and will be doing instructions in the next week or two. (If my schedule provides) -
Hi everyone,I present to you a Jeep Gladiator Gravity-inspired vehicle made out of only the parts from the Ford F150 Raptor! Now it was a real challenge to design some parts of this model only using the parts available in the Raptor however, I really believe that this model looks good and that its suspension (highlight of this model) surpasses the Raptor.This model is based on a variety of different custom jeep designs but its main inspiration is the Jeep Gladiator Gravity!Features Steering via a gear at the top Simple, matching and pleasant interior NO DOORS (Preferred for a better 'offroad' look) Opening tailgate and large bed Opening hood with working engine Solid 4 link axle front and rear suspension Amazing flex Great design! Conversation Starter! Full description, more photos and a video here Instructions: https://reb.li/m/101856 -
Hey everyone, here is my newest creation... An 850hp supercharged BOAT!!!! AKA the Dodge Challenger SRT Demon!!!!! It is made using the parts from both 42154 and 42126. I liked this car and wanted to design a model that would highlight a similar and recognisable look! Please let me know what you think about it! Some photos and features: Front and rear View \ Wheelie function which is accessed using the orange key Doors, boot and hood can all be opened Please enjoy a video I made: https://youtu.be/TNrUjsT_23U?feature=shared Now on rebrickable: https://rebrickable.com/mocs/MOC-171570/CrazyKreations/dodge-challenger-srt-demon/#details
-
Hey everyone, CrazyKreations here. We are proud to present to you all our new alternate builds using the Lego set 42126, the Ford F-150 Raptor. This would be the 5th alternate build model that we have designed from the Ford Raptor! As always this model has a variety of features and detailed instructions on how to build this model. This model is a 1970 Dodge Charger and was inspired by Dom's Offroad Charger from the Fast and Furious 7 movie. The movie car featured an offroad modification of the traditional Dodge Charger for an offroad scene in the movie. We were inspired by this car and decided to remodel it using only the 42126 Ford F-150 Raptor's parts. Some Photos of the model: Features: Although this model is intended for display, it features some sturdy features that increase playability. This model has the following features: Front and Rear Suspension Independent and Solid axle suspension Steering via HOG Detailed + Working Flat 6 Engine Detailed Interior 2x Spare wheels (I used different spare wheels in the video as the Raptor only comes with 4 wheels) This model was intended to be modelled after Dom's 1970 Dodge Charger from Fast and Furious 7. If anyone has any concerns about the model please feel free to send us a message on rebrickable via Private Messaging or contact us on our website using this https://www.crazykreations.com.au/support
-
Hey everyone, I just made this new MOC and I'd like to hear your thoughts on the model. It's a 42126 alternate build so it uses only the parts from the Ford F-150 Raptor.
-
Hi folks, I'm happy to introduce my alternate build from the official set 42126 Ford F-150 Raptor, the Unimog (UniMOC) U1400 with Snowplow attachment. As the little brother of 8110 Unimog U400, this model in 1:17 scale uses 1264 parts of the inventory from the set 42126 Ford F-150 Raptor and 2 spare parts included in the set with a total of 1266 parts. Having the set 42126 Ford F-150 Raptor, all parts are available to build this alternate model and no other parts from other sets are required. The two spare parts from 42126 to build this Unimog U1400 alternate are: Instructions are available on rebrickable Follow this link to my page for more content Functions & Features HoG-steering independent suspension in front and back working 4-piston engine under the hood openable doors detailed interior openable hood to reveal engine attachment for Snowplow, moveable in high and tilting angle fully closed tipper bed with openable lid and lock additional snow shovel 40cm x 20cm x 18cm Impressions Sticker The model 42126 Ford F-150 Raptor uses many sticker for the lights in front and back, which are reused in this Unimog U1400. The images above shows some custom sticker, which are not part of the 42126 model and not mandatory to build this alternate Unimog U1400. Those custom sticker are optional and only used for better and more realistic look. If you have the ability to print custom sticker, feel free to do to polish up this model. Below this is how the front of the model looks like without any custom sticker, but with the original headlights of the Raptor... ...and without any sticker, for custom headlights for example. Instructions The premium instructions with high quality images as usual comes with 254 pages for a challenging but satisfying building experience. For a 18+ set, this alternate model is not more difficult to build than the Raptor. The instructions are available at Rebrickable. Here are some example pages of the instructions: Unimog U1400 in real Have fun with this replica of Unimog U1400 alternate build and feel free to build and discuss. I know this model is not 4x4 and it can't be 'cause the Raptor is not 4x4 and there are no parts in 42126 to do that. -
Hey everyone, CK here and this time we present you a tradie tray. Down under (in Australia) you get to see heaps of different types of trays for more heavy-duty work such as for carrying bigger objects, carrying tools and for extra storage. In Australia it doesn't matter which truck you have, all that matters is that you can buy a custom tray and place it as a replacement for your truck's stock bed. I personally have seen heaps of ford rangers, raptors and even a Suzuki Jimny with a Tradie tray! So this time we made a custom rear bed for your Raptor as Lego advertised this truck as an absolute powerhouse we decided to make a "more work" modification to this iconic truck. And for more photos please head to crazykreations.com Features Ample space for PF lights Tow bar 2 in 1* Additional toolbox (2 mods in 1) Flatbed works well with the model's suspension Secured tightly on the model Easy to remove and swap with the original! The Tradie Tray is also available in other colours such as blue, light bluish-grey and orange to match the Raptor! Here's a photo of it with an Orange Accent colour: *This model is a 2 in 1 as there is a version of the custom tray that is optimised to have a canopy as extra storage as well as the flatbed option. Link to instructions https://rebrickable.com/mocs/MOC-94815/CrazyKreations/2-in-1-tradie-tray-mod-for-42126/#details
