Search the Community

This is my first train MOC (and my first post!) that started out as a "simple" upgrade to set 75955 and, well, I just got a little carried away. I originally wanted to add a bit more detail, but after researching the "Hall" class locomotives, a dozen bricklink orders, wheels from Big Ben's Bricks and the Brick Train Depot, and 4+ months of on-and-off-again building, I think I have finaly something that looks like a locomotive! I've had more fun, challenges and frustration than from any other MOC I've ever built before, but I'm now hooked on building ONLY Lego trains....and maybe some Star Wars stuff.....and modulars......and............. Still plenty to do, but as I'm stuck on a couple SNOT connections, I'm going to be asking for your help with this as I finish up the build. Some details: it will run on standard track but it is big at 62 studs long with the boiler 6W to accommodate an L motor, PFx brick and lights (the flickering coal in the fire box looks so cool) 7W walkway, 8W cab, and the battery and speaker in the 8W tender (9W at the top) Hope to get the plans ready by Christmas! Thanks! DMRR Wolfe

Hi Everyone! I'm used to orange, and the first time I saw this color scheme it hurt my feelings, but after saw a couple more times I kinda dig it this Bee Painted. This only digital for now... Medaway 1446 by Sérgio Batista, no Flickr Medway 1446 by Sérgio Batista, no Flickr Medway 1446 boggie turn by Sérgio Batista, no Flickr Medway 1446 by Nelso Silva, no Flickr

Hello everyone，today I want to share my new MOC with your. "Dongfeng" diesel locomotive is a diesel locomotive produced in China from 1958 to 1972. (The appearance of Dongfeng 3 diesel locomotive is consistent with that of Dongfeng, and the production year is 1972-1974) The Chinese pronunciation of "Dongfeng" is " 东 风 ", which means the wind in the East. It means that the east wind brings hope and vitality to the country and people. Today, the diesel locomotives have all been retired, and some locomotives have entered museums and parks for display. (These pictures come from the Internet.) Next is my work display. This picture was taken in my garden. The slope of the front is what I'm proud of. The back carriage are also my MOC. I chose the most conventional green for the locomotive body, because this green can show different depths in different light environments, which is very interesting. The sticker is designed by myself and uses ordinary paper. This is my favorite photo, which can highlight the characteristics of the locomotive.There are two lights on the front of the locomotive. On the side of the locomotive, I used a lot of "32028" to depict the body, making the work more vivid. The back of the locomotive is provided with number and allocation place. The roof can be easily removed.The power uses the Bluetooth battery box of mouldking and two XL motors of LEGO. There is no problem with the locomotive running. I am very satisfied with the traction.I can use my mobile phone to remotely control the locomotive. The diesel engine in the middle is movable, and a rod is connected to the motor. In July this year, I attended a Bricks lovers' Party in Guangzhou. This is a group photo of my locomotive and other MOCER s' locomotive. I'm the head of the train area for this party，I took a lot of photos for this party. If you are interested, I will open another new topic to show you the photos. Finally, thank you for watching.

This is an original creation of mine, and also one of my favorite MOCs. Though I referenced some real life streamliners, the design is wholly original. It is a streamlined Heavy Pacific locomotive, with its shape and silver accents garnering it the moniker of Silver Bullet. This MOC uses mostly vanilla parts in Bricklink Studio, aside from many of the silver parts, custom single studs used for lighting effects, and the XL wheels from Big Ben's Bricks. It also has fully modeled valve gear made entirely out of Technic, as well as an original design of corridor tender. Feel free to comment your thoughts and feedback, and lemme know what y'all want to see next.

So this is gonna be like my default thread for posting lego trains. Anyways, lemme start off by posting this double pacific Garratt, complete with railings, fully modeled valve gear, number plates, and full articulation Here's a side view with light effects

There were two trains at Disneyland opening day in 1955, and these were the Retlaw series. Retlaw 1 was the passenger train which consisted of one baggage, four passenger cars, and the observation car. Five of which are no longer used or were sold. (but the observation car is still used - as the Lilly Belle parlor car as seen in the official set) However, in this fictional revised version of the train, this retirement didn't happen, though they were modified. (Also, Retlaw 1 was NOT normally pulled by the engine C.K. Holliday, instead, it was pulled by the E.P. Ripley. But I forgot about this fact when I digitally built it / took the pictures.) The real Retlaw 1 was originally a yellow painted train, featuring front facing seats until it was mostly retired in 1971. The observation car of Retlaw 1 then became a parlor car known as the Lilly Belle. (named after Walt Disney's wife Lillian) This fictionalized train is in the revised, post-1971 color scheme of the Lilly Belle also has two passenger cars plus a baggage car with opening side doors. These cars all have side facing seats, as if Retlaw 1 were around and used in modified format after the 1971 overhaul of the Retlaw 1 observation car into the Lilly Belle. As a side note, each of the cars feature a removable wall for getting at the inside details, as in set 71044. The baggage car features two sliding doors in red, though other colors are an option to stand out more. (I prefer black doors, but that's not prototypical!) The side wall comes off, as it does on all the cars, to reveal seating. In this car, that means luggage room and two seats. The two coaches are identical in every way, and are also quite similar to the parlor car at first glance. The inside features side seating, as in the Disneyland park... this also allows for easier moving of figures, and placing them in any of the five seats per car. This is the stock LEGO set 71044 version of the parlor car, but I thought you guys would like to see it alongside everything else. The inside of the Lilly Belle is different than the other cars, featuring a table, three seats, and a bunch of table-top items (I couldn't find the teacups in my program, or make the flower pot work, so they are missing here!) The rear of the whole train. This train was designed with my father and his trains in mind, though he doesn't want to build them in real life. (This explains the 9v motor hooked onto the tender, as that's his preferred system) Thus I'm going to give away the LDD file for them, which you can find it at on my Bricksafe page.

Does you track need to be repaired after a major storm? Want to connect Point A to Point B with a brand new rail-line? Did the Flying Kipper have another accident on the main line? Or maybe you want to upgrade the signaling and double track the line at the same time? Call out the Maintenance Of Way (MOW) train to fix all these problems and more! This train consists of a late-1950's diesel locomotive, or a mid-1930's large eight-driving wheel steam engine and six specialty cars: - a (working!) crane car - depressed-center rail wagon - a (working!) ballast hopper - a tanker car - workman's tool car - caboose The 4-8-4 steam loco is new-to-me, and began life as a 2-8-4 Berkshire type built by Plastic_Goth and purchased from Rebrickable a seen here. To make this steamer, I upped the wheel count of @Plastic_Goth's locomotive by another leading axle, making it into a 4-8-4 Northern-type from the original 2-8-4 as built in the instructions. The new piston / wheel assembly is entirely my own work, as is the completely new 7-wide tender. The inside of the cab features two gauges and the firebox door. This model was originally a ALCO MRS-1 built by @SavaTheAggie, but has been so severely modified that it no longer looks like the prototype loco. So I went searching And found another ALCO locomotive, a RSD-12 that looks like my loco. Both my model and the prototype have the six wheels, and the same basic hood and cab design. The long hood of the loco has been designated the rear with a double red light. This car carries liquid weed killer for use after the track has been laid. This stream crane model was heavily inspired by Whoward69's instructions for a set of crane and match truck train cars. I modified the original model seen here. (sadly, it seems his Flickr profile and pictures has been deleted) I originally meant for the crane to have ropes to move the boom, but it got confusing on which rope went where so for now it's moved by the H.O.G. (Hand Of God) method. The crane can spin around in 360 degrees and lift anywhere up to 90 degrees straight up. (Their is a double set of pins keeping the boom from going too low, as well.) The heavy-duty depressed-center wagon has brick-built arms to secure the cargo of prefabricated railroad track in place. This model was inspired by a coal hopper on an older website called LGauge .com. I turned the old finger hinges into new pin-orientated ones and colored the car yellow to match the MOW paint scheme. The hopper's bottom doors open and can dump 1 x 1 round plates / bricks onto the tracks for ballast. This old passenger car carries the workmen and their tools. The caboose features two ladders (one per side) and more of those fancy printed 2 x 4 tiles. If you like what you see in this topic, check out the home base of the train and assorted other vehicles in this thread here! Thoughts? Comments, Suggestions, & Complaints always welcome!

This 7-wide steam loco began life as a 2-8-4 Berkshire type built by @Plastic_Goth and purchased from Rebrickable a seen here. This train features an 4-8-4 "Northern" -type steam engine that was purchased and modified a month ago from the link posted above. However, it still hasn't been bought parts-wise IRL. The coaches are just recolored and modified versions of my dark green / black Emerald Express cars, with the rear car having a rounded window instead of a open platform. I upped the wheel count by another leading axle, making it into a 4-8-4 Northern-type from the original 2-8-4 Berkshire. The pistons are entirely my own work, as is the 7-wide tender. I chose the Wabash Frisco and Pacific as the name of the owner of the engine, because the real world ride-on 12-inch gauge railway is re-opening soon (Yay!) and because I felt the shark-nose Baldwin diesel units (plus the passenger train as well) I made in a similar paint scheme could use some company. The coal tender will have the letters W-F-P on the side, standing for Wabash Frisco & Pacific, while the cab will feature the number 2980 on both sides. This is a scrambled homage to real world WFP 4-8-2 engine 928, which is so strong, it's pulled every piece of rolling stock the railroad owns -at one time- with ease! The inside of the cab features two gauges and the firebox door. This combination baggage and passenger car (known as a combine) relies heavily on techniques taken from Retlaw baggage car built by @TJJohn12, as seen here. The three identical coaches have inset doors I designed myself. The streamlined observation car of this train should feature two of these windows in white (which sadly aren't in LDD).

The 0-6-0T (T standing for Tank) steam engine seen below was inspired by this English 0-4-0T shunting loco made by Block Junction. I made the loco look a bit more American and gave it a grayscale color scheme so it could be owned by my fictional version of the real-world Wabash Frisco & Pacific 12-inch gauge ride-on steam railroad. The loco gives me a 1920's commuter-engine feel, so I hooked it up to four, two-axle commuter cars which were created by using this tutorial made by @Pdaitabird here to build the coaches. I heavily modified the coaches by enclosing the entry doors area and adding inter-car connection doors. The loco is a 7-wide six wheel model, with (working!) outside pistons. Big Ben Bricks medium wheels will be used for the driving wheels, with two being blind, and the remaining number will be flanged. The engine will feature the letters WFP (standing for Wabash Frisco & Pacific) on the tank side, while 771 will go on the cab walls. The rear of the tank loco, showcasing the coal bunker and inside details. The four-wheel baggage car. The are two commuter coaches. The observation car, designed to give a little class to the workday commute with a rear platform at the rear of the train. This train will go alongside the shark-nose diesel loco with mainline passenger train and the (as yet unbuilt) 4-8-4 steam locomotive that will pull the Conjunction Junction freight train on my layout. What do you all think? Comments, Questions, and Complaints welcome!

The engine seen below originally came as a generic British 2-6-0 from the Block Junction website, to which I added two extra leading wheels and a new paint scheme inspired by that found on London, Brighton, and South Coast Railway locomotives around the turn of the 20th century. But wait, you say, there were no 4-6-0's in that time period on that railway, or even ever painted in that scheme later on! I know that, consider this a experimental one-off that was a hushed-up trial in superheating. (or something similar they were trying back then) Anyway, a group of close friends and business leaders bought the one-off loco from a backlogged scrap dealer in the early 1930's and preserved it. (These people later became the LEGO Rail Transportation Society in the late 1940's, saving more and more rolling stock and locomotives before saving a to-be-torn-up branch line during the Beeching Cuts of the mid-1960's.) The engine was repainted to LBSC colors somewhere in that time, and re-allocated it's old number X1, designating it as a experimental engine. Over the years, the engine was restored to working order, and had it's troublesome super-heater removed entirely and replaced with a better one. It now runs as a mixed-traffic loco, puling tourist passenger and freight trains alike, just as it was designed to do in the late 1890's / early 1900's. The letters LBSC will go on the tender walls, while the engine will feature X1 on it's side. The block junction page I bought the original 2-6-0 from is seen here. Close-up view of the three passenger coaches, from which Annie and Clarabel (from The Railway Series / Thomas and Friends) contributed their designs to the look of. …and here is a close-up view of the guard's coach, which features a compartment for luggage and the guard himself. (That's a UK version of what we call the Conductor here in the States.) NOTES: Now, I know the coaches are a bit short in height by a single brick (or is the loco to tall?) but otherwise it looks odd if I change it to be taller / shorter. Any thoughts, comments, or suggestions? They are all welcome!

Hi there! This is my debut publication and let me present to you this Swiss Electric Locomotive, reproduced as faithfully as possible from the SBB Be 4/6 locomotive. This is a minifig-scale model. The model has a removable roof. Inside the model are: two electric motors, transformer, tools (4 pieces), compressor (x2) and a tool suitcase. The set includes a figure of a train driver with a briefcase: Inside the cab Front view New design of pantograph - first variant: ... and second variant: The first variant is not pretty enough, but it allows the pantograph to fold. The second variant is more elegant and plausible, but does not allow the pantograph to fully add up. This model can be motorized with the 1x 8809 and 2 x88013 Powered Up kit. Model info: Length: 50 cm (45 studs), Width: 9 cm (6/7 studs). Total parts: 1140. If you like this model, you can support it on LEGO IDEAS Thank you for your attention! I hope you enjoy this locomotive!

Hello there, this is my lego version of the japanese electric locomotive JNR Class EF65-1000. It´s operating on passenger and freight services in Japan since 1965. I really like the bulky and boxy shape, i think this translated pretty well to lego . Feel free to tell me what you think, comments and critic is very welcome! But enough talk for now, have fun watching the pictures: JNR EF65-1000 Lego MOC by Henrik S, auf Flickr JNR EF65-1000 Lego MOC by Henrik S, auf Flickr JNR EF65-1000 Lego MOC by Henrik S, auf Flickr JNR EF65-1000 Lego MOC by Henrik S, auf Flickr JNR EF65-1000 Lego MOC by Henrik S, auf Flickr (The loco is fully able to navigate the lego switches and R40 curves, the front and back boogies can swivel, the middle boogie holds the chassis of the loco)

Hello everyone, and thanks for stopping by! I´d like to show you my MOC of the DB Class 143. The proportions, similar to my class 111, aren´t 100 percent perfect to the prototype, but i´d like to think that it fits well with the official lego city trains. Maybe some of you guys will like it, if not that´s okay too Hope you enjoy the pictures, feel free to comment and critizise! DB BR 143 by Henrik S, auf Flickr DB BR 143 by Henrik S, auf Flickr DB BR 143 by Henrik S, auf Flickr As suggested by @Duq in the class 111 thread, the skies are now attached to the pantograph via 1x1 tile with clip DB BR 143 by Henrik S, auf Flickr

These two trains comprise my space-train fleet for the Nexus Force, one streamlined passenger train, and one generic freight train. You can see more the Nexus Force stuff in this thread here in the Space sub-forum. It features a modular base, trucks, crawlers, and several spaceships, along with the mini-figures. (human or otherwise!) The Moonlighter train is owned by the Nexus Force, and is a retro-futuristic stream-liner mix of old-school steam technology, but with hyper-modern safety features designed specifically for use by Nexus Force personnel as a very high-speed, high-security ground transport between the northern-most city of St. Nicklaus and north-pole-hugging outpost of Ice Station Odyssey, around 500 miles away. (this all takes places on the ice-bound planet of Beta Polaris, which orbits what we here call the North Star, far away from Earth.) Thus this makes it a space train! Unlike the slower Earth trains, the Moonlighter type of space-train is super-streamlined, and can go up to speeds of up to 110 MPH (135 is the loco's top possible speed) on it's special track, with super-elevated curves and long straight-away's over hundreds of miles, all while using Positive Train Control (PTC) on the the mostly double-track mainline, where all vehicle crossings are flyovers and switches virtually non-existent once out of St. Nicklaus city limits. This train runs along with nine other identical versions of this train (10 total trains in all) on the route with up to seven in running order on the route and at least two in the maintenance shed / in emergency backup storage at any one time. They are numbered 200 through 210. The Nexus Force logo on the nose of the Moonlighter streamlined casing, (near the smokestack) and the rear of the observation car, while the engine's number (207) goes under the cab windows. The two forward tanks are for oil, and the rear tank is for water. The engine is equipped with a water scoop (like on the old New York Central steam locomotives) for refilling the water tank on the fly. There is a ladder from the tender-top deck to the coupler level behind the engine for access to the trailing passenger cars, and two ladders on either side of the steam loco for entry into the enclosed control cab. Three of these passenger cars go on the Moonlighter, with two before the dome car and one immediately after it. The recessed panels are the platform doors. One of these vista-dome cars goes in the middle of the train. (You may have noticed there are no exterior platform doors on this car. I decided not to add them because they didn't look good with the dome.) The rear observation car is currently missing it's rear curved windows, but it will have them when built IRL. The Nexus Force logo goes on the rear of this car, as previously mentioned above. After 45-ton locomotive 2011 has arranged a freight train in the Nexus force spaceport's yard, a electric main-line loco has arrived on scene to pull it's train to the some 500+ miles distant city of St. Nicklaus. This larger locomotive is numbered 99, and is running with a mobile armored cannon unit for the journey ahead, as it runs through some areas that could be ripe for an ambush by enemy forces, as you never know where the Maelstrom might have agents in deep cover or have planted ambushes alongside the line. A train was derailed and attacked last month in Avalanche Canyon by pirates, which is why the railroad is taking no more chances while it's position is being currently fortified all along the route. The other cars being pulled are: a flatcar carrying Commander Bob's 1960's sports car (going for it's yearly tune-up in town), a fully-loaded gasoline tanker, bathtub gondola with ice boulder load, and a bay-window caboose for the train's rear-end crew and a few more soldiers... just in case! This orange and white electric locomotive was inspired by the preliminary version of set 60198. (2018 Freight train) The inside is accessible via the removable roof sections. This model was inspired by this armored train MOC, that was itself inspired by the movie "Castle in the Sky" and it's armored train therein. The road vehicle model is partially inspired by Lola the car from the TV show Agents of Shield. (although this one doesn't fly) The sports car doesn't have great off-road capabilities, so it has to be trucked in on a flatcar to the remote space base. This fuel tanker is filled with gasoline or diesel fuel for use in the space base's land vehicles. Usually two or three tanker cars are sent into the base every couple weeks for refueled the on-base supply. This bathtub gondola is filled with ice boulders that have frozen ancient lifeforms trapped inside. The Nexus Force is sending them to a specialist laboratory off-world to have the DNA decoded and the beings themselves studied. Due to height clearance issues in St. Nicklaus city, regular-height cupola caboose types are forbidden. So, the bay window type is used instead. This moon base-like space base model is where the Moonlighter travels to, and was inspired by set 60036 (Arctic Base Camp), with a rooftop shield generator partially lifted from set 75098 (Assault on Hoth) and a sensor array inspired by set 76157 (Wonder Woman VS. Cheetah) The base consists of eight separate, interchangeable, modular sections, all of which have opening roof / wall sections for ease of access. These sections include (but are not limited too): a common bunk room, a spaceship control tower, a fusion generator, communications room, break room, and several more. As you can see, I joined the base to the rail-line with a short siding for freight deliveries, and for the servicing of steam locomotives on services such as the Moonlighter.

Recently I made some trains from Lego for wooden rails. They looked pretty familiar so I compared them to my old H0 trains and ho and behold they are extremely close in size. I quickly made a bunch of different wagons and trains. This way the kid can play with his H0 push along trains on his wooden railway network. Doing the same on my proper H0 railway resulted some catastrophic failures. If he breaks the Lego trains, I will be able to reassemble them with ease. Plus they are pretty cheap. The V90 set with all the wagons cost only 30 Euros. So far I made a DRG Class 80 steam loco with a matching coach wagon and a DB V90/100 with a flat wagon, a cooler wagon, a generic freight wagon and a tanker wagon. I'm in the process to make DB TRAXX and maybe a V43. I used solid bogies with those big wheels. The pin allows enough movement for the wheels take regular turns. The Traxx will have rotating bogies because that is freakin long, 27-28 studs. More pix here: https://bricksafe.com/pages/Pendra37/4-wide-trains

In this latest model series, I decided in order to keep the "toy like" proportions of it's inspirational genesis, set 71044. (Disney train) Now, people who know my design style are probably scratching there heads right now in confusion, as I don't EVER build in 8-wide for trains. But in order to make it look as good as possible with the original 2010 Toy Story figures and their stretched appendages, I had to do 8-wide. My current setup... minus a few things on the other table not shown. This scene will change, as the freight 4-4-0 needs revision on the tender, and the passenger 2-6-0 and it's train need heavy work done, as you will see! Loco Number 1 - 2-6-0 Mogul w/ passenger train This 1890's style train is to be pulled by my revised Western 2-6-0 steam loco, and will be made from my older three yellow train cars. These newer cars are four studs shorter, so I can fit a fourth car in the storage box with the extra space. Also, the sidewall closest to the camera comes off on all the cars so you can get at the inside details. The coal-burning straight stack-styled locomotive is a mish-mash of two steam locomotives, the 4-4-0 from the Toy Story 7597 set and a British 2-6-0 train model designed by Block Junction. I repainted the British engine into a Toy-ish color scheme, then added 8-wide late 1800's American-style features with printed parts from set 7597. Oh, and I built a brand new small size tender from the rails up, which uses new red wheels from BrickTracks.. The rear of the engine features a coal tender with a ladder from the water tank-top down to the magnetic coupler. This tender is smaller than before, as it looked very silly next to my 2-6-0 IRL, and even worse next to my blue Western 4-4-0, which currently has an exact copy of the earlier tender version as well. The baggage car features two sliding freight doors in red along with two non-functional passenger doors in black. The side wall comes off, as it does on all the cars, to reveal seating. In this car, that means lots of luggage room and two seats. The two coaches are identical in every way, and are also quite similar to the parlor car at first glance. The inside features side seating, as in LEGO set 71044's Lilly Belle car... this also allows for easier moving of figures, and placing them in any of the five seats per car. The observation car features a rear platform, plus a red drumhead ready for the train's logo. The inside is the same as the two coaches, with five seats. Loco Number 2 - 4-4-0 American w/ freight train This freight-hauling locomotive is meant to be built from sets 7597 (Western train Chase from Toy Story 3), 71044, (Disney Train and Station) and set 10014. (Caboose from the My Own Train series, albeit a bit bigger width-wise!) I also used set 10013 (Open Freight Wagon, also from My Own Train) as a guide for the pipe-carrying car, plus model 15 (Tanker) from set 10183, Hobby Trains for the tanker car. This loco shares the same tender as my other Western 8-wdie loco from this time period. The engine itself, however, is an enlarged version of 7597, in yellow and blue. It's also meant to have inside pistons as it's an early-to-mid 1860's locomotive. (thus the lack of visible pistons!) The locomotive is missing these printed parts. They are as follows: The four yellow 1 x 6 bricks are supposed to be printed with this number 2. while the headlamp is supposed to have two of these printed yellow 1 x 1 tiles. The firebox door requires this print. This boxcar is an enlarged to 8-wide and recolored boxcar from set 3677 (2011's Red Cargo Train). The printed doors (not shown) and from set 7597. (2011's Western Train Chase) The coal-filled 8-wide gondola was inspired by a sub model from set 10183. (2007's Hobby train) This water tanker is a version modified of set 2126's (Train Cars) design with newer reddish brown tanks instead of the vintage 1998 brown of the original model, and now in 8-wide. This model was built from instructions seen at the Old Workhorse's Lego Ideas page as seen here. (I am not affiliated with the creator of that page, I just used their free instructions, visible further down in the updates section, to build the traction engine seen here.) This car is a mashup of set 10013 (2001's Open Freight Wagon) and the bed area from set 60059. (2014's Logging Truck) This caboose was inspired by set 10014 (Caboose) except this versions is 8 wide and the main two colors are reversed. Loco Number 3 - 4-10-0 Super Mastodon w/ military train This entire eight-wide military transport train was inspired by sets 71044, 60052, 79106, and 79111. It is inspired by the 1975 film "Breakheart Pass", which features an US Army resupply train traveling to a Western frontier Fort under siege. This train also has a couple play features, such as a rotating Gatling gun, moving steam engine side rods, and a exploding jail car wall, among a few others. This engine is basically a stretched version of my Western 2-8-0, with another driving axle and a four wheel truck in front. The wheel diagram show which six wheels will be blind and which four will be have a flange. I've tried a similar (albeit reversed) setup on my UK 2-10-0, so I know the wheel arrangement works in it's basics, I'm just not sure how the magnetic coupler will like this new arrangement. (My 2-10-0 doesn't like having a magnet, so it's hard-connected to the tender by a lift-arm on that MOC.) I included the working pistons, and a more cohesive color scheme of red and green, with a splash of yellow as on the previous 2-8-0 steamer. Big Ben bricks' medium size wheels, 4 with flange and 6 blind, are meant to take the place of the gear wheels in the order shown above. You can buy them at his site here. The tender and cab walls are supposed to have four of this printed red 1 x 6 piece inserted into them: The front headlight is supposed to have two of this printed 1 x 1 placed on it. This horse car was originally a cattle car from set 60052, (2014 Cargo Train) but I've re-purposed it for my Army officer horses. These cannons are from set 79106 (Calvary Builder Set) and were placed on a generic two-axle flatcar for transport by rail. The rotating Gatling gun you see here was taken from set 79111. (Constitution Train Chase) This car has the basic "look" of the Lily Belle parlor car from 71044, (Disney train and station) but is less ornately furnished due to be a second-hand coach refurbished cheaply for use by the US Army of the 1880's. The right-side wall is removable for access to the inside. The jail / baggage car you see was originally from set 79111, (Constitution Train Chase) with the basic coach styling of set 71044. This car has one play feature that is sure to blow you away: the back wall can be removed to get at the jail cell via the "dynamite" on the outside of the back wall. When pushed back towards the other end of the car, the lever on the left side pops the back wall out and the bad guys can escape! Also, the right-side wall is removable for access to the inside. Loco Number 4 - 2-8-0+0-8-2 Garratt w/ rotary snowplow train This blue train is marked (2-8-0+0-8-2 Garratt, for heavy duty rotary snow plow jobs) number 4, and joins the family of similar mid-1880's engines such as the large 2-8-0 for military transport, the inside-piston 4-4-0 for freight, and the fancy 4-6-0 for passengers. This 8-wide Garratt-type steam locomotive is perfect for use on the mountainous terrain of Colorado Rocky Mountains, with it's double steam locomotive pistons sets. (Before anyone says anything about Garratt loco's not being ever sold into the North American market, I'll say it's an lost experimental prototype to help with a motive power shortage. It may have been seen by the owner as a economical way of sending one locomotive to do the job of two.) This steam powered rotary snowplow was inspired by the real-world Denver and Rio Grande's narrow gauge plow "OY", as now seen on the Cumbres and Toltec RR in New Mexico / Colorado. I've decided to name my plow "YO" in tribute to my inspiration, using four of this part from the original Toy Story sets as a sort of marker. The rear of the plow features the coal tender. This 8-wide engine was originally a SRW locomotive works product, (made by Anthony Sava and formerly available on Bricklink until LEGO sadly removed most of his models.) I reworked the engine to have working pistons and side-rods plus a longer frame. This made it from 2-4-0+0-4-2 to a 2-8-0+0-8-2, among other smaller updates to the engine. I also substituted a Disney train-style boiler onto the engine to backdate it to the mid-1880's or so. Even with the added pistons, the engine can go around corners and switches quite easily. A simple caboose, for the snow plow train. I used a pair interesting windscreen parts for the cupola windows. Loco Number 5 - 0-6-0ST shop switcher Locomotive number 5 is an eight wide model of a generic 0-6-0 saddle tank steam engine from the later half of the 19th century, and was inspired by a @ScotNick build of Stanley from Thomas and Friends for the stripe work, and this build of Percy (also from Thomas) from the L Gauge site for the front of the boiler/ piston assembly. Here is the coal bunker / driving controls shot for this 8-wide yard goat. NOTE: The color scheme is red and yellow, though sadly here red looks pink. Loco Number 6 - 4-2-4T w/ RR office car I created a more realistic version of the 2016 Winter Village holiday train (set 10254) for all the train fans who didn't like the engine. I added working pistons, and more colorful (and less festive!) color scheme plus two more sets of fuel bunker-based wheels on the rear of the engine. The accompanying business car is for the WXYZ railroad president, and features a accessible interior, like the Disney Train (set 71044) it's modeled after. This private car has been given the name "Mount Clutchmore", after the tallest peak and highest point on the WXYZ line, at the tunnel under said mountain in Colorado. This locomotive is modeled after the unique C.P. Huntington of the Central Pacific railroad. The model will be numbered 6 for use on my Wild West railroad, and and features a (small) balloon stack, yellow and blue paint scheme, with red accents. This railroad office car is modeled after the dark red observation car as seen in the Disney Train LEGO set. It has been changed to a blue paint scheme, with red doors/ windows and brown trim, with a black roof. As the car has been stretched by four studs to fit the longer frame, there is more room inside. The Mount Clutchmore office car features three chairs, a table with drinks for investors / newspaper reporters, and a planter on a table at the rear-most end. Almost the whole wall is removable to get at these inside details. Loco Number 7 - Automotive Rail-Speeder The early '50's automotive rail-speeder is inspired by this fairly recent @hachiroku build here and by @Cale's pictures of Ma & Pa RR 101 as seen here. The vehicle is numbered "7", for use on the WXYZ Railroad, and rolls quite well on the track with no problems in stock switches or standard R40 curves. The rear has two coverings almost fully obscuring the rear wheels, in true retro style. This model is designed for track inspector's and high-up executive's to get up close and personal with the railroad. The roof is removable and the doors open, with seating for two figures side-by-side. Loco Number 8 - Galloping Goose (freight version) This Galloping Goose's front half was inspired by @hachiroku and his Indiana Jones staff car MOC, as seen here. The rear of Number 8, with all the doors open. Loco Number 9 - 2-4-0 Old English w/ silver ore and mine payroll train This very short train is based off set 7597, Toy Story 3's Western Train Chase, which my dad purchased for my birthday gift for later this year. I digitally converted the 4-4-0 "American" into a 2-4-0 "Old English" type which I then based off the real world 2-4-0 'Montezuma'. That 1871-vintage engine was the Denver & Rio Grande's first steamer. (which was the basis for the fourth Disneyland loco, the Ernest S. Marsh, by the way.) I had a real urge to name the LEGO version of the engine after Achu, the South-American tribal leader from the Adventurers' "Jungle" subtheme as a tribute to the real-world Montezuma engine and it's namesake Aztec leader. But I didn't think anyone would get the reference, so I didn't... at least not yet! The locomotive as it will be later in the year. I used the basic look of the Disney set 71044's engine for the two wheel tender, as it was too good an opportunity to pass up. (and it's accurate to the real engine it's based on, too!) I also managed to add working pistons, though quartering was not possible, sadly. The rear view of the engine, which will be numbered 9 in my numbering scheme for the Wild West-era W.X.Y. & Z. Railway. (This means it is replacing the 2-6-2 loco on the wanted list.) These three silver ore cars are taking their loads to the U.S. Mint in Denver to be made into coins. The mine payroll boxcar will feature dollars signs on the doors, as in the Toy Story 3 set. The caboose will have printed parts on the sides, saying "GREAT WEST". The inside with the roof removed. The Wichita Xenia Yazoo & Zephyrus Rail-Road (Stock market trade name WXYZRR) was a mid-19th / early 20th century enterprise also known as the Wasted, eXausted, Y bother & Z*. (*No one could figure out an insult to the railroad that started with the letter "Z") The railroad started in Wichita, Kansas in 1868, then went straight through Xenia, Oklahoma, while then meandering into Yazoo, Colorado and barely making it into Zephyrus, New Mexico by 1875. Other stations included several army forts dotted along the route through Oklahoma and Colorado, along with scattered mining camps and agricultural towns across the maps of New Mexico, Oklahoma, and Kansas. The railroad is hardly mentioned anywhere in writings of journalists, except in scathing "letters to the editor" of various newspapers about lack of the promised service on the line in the early years. Also, the much derided company slogan "last railroad you'll ever need" did not work out well for the new railroad, but it did vastly increase questions fielded to the main office about coffin, headstone, and various other memorial shipments from all over the area from which the railroad served. It is therefore shocking the railroad lasted as long as it did, a substantial fifty-six years from incorporation in 1867, to it's sale at auction in 1923! The old WXY&Z railroad had about 35 locomotives on the books at the maximum, but most of these were already very old when purchased and broke down frequently so they were chronically in the workshop for some reason or another. In fact, the seven additional 4-4-0 locomotives purchased third-hand from engine dealers were of the long-obsolete inside-piston variety of the mid-1850's, yet were bought in the early 1870's! However, what the railroad lacked in regular service motive power, it made up for in the snow plow-train department. A single prototype of what would later be called a "Garratt" (a doubled-power-unit steam loco with a single boiler not normally found in North America) was first run on the "High Line" between Fort Legoredo, Colorado and Glencoe, New Mexico in the steep Rocky Mountains. This is where the railroad really shined, in keeping the trains running through steep mountain passes with a single experimental train with a rotary snowplow at the head end... of course, there were other plow trains, but only two rotary trains. (One would work from either end of the Glacier Gulch Pass, and meet in the middle on a passing siding. The Garrett would be on one train, and two regular locomotives pushing the other.) After 1923's closing of the railroad, it was bought wholesale by a consortium of stock brokers from Denver, with plans to redo the line with less sharp grades and more snow sheds. However, during this reconstruction, the 1929 Great Depression began, leaving half the line with old grades though most of Colorado mountains, but new grades on New Mexico were finished in time. The passenger car fleet was upgraded, but the freight engines (downgraded passenger power, really) and rotary plows remained vintage as far back as 1878 for motive power. The older inside-piston locomotives went for sale once the Depression really started up, and one was snapped up for a potential history museum in Glencoe, while the rest were scrapped. Then, a miracle happened: the movie industry intervened, and several production houses bought some of the oldest rolling stock, engines, and the line was given enough cash to stave off it's dismantlement until 1941, when trains of heavy munitions from companies on the line came rolling through for the War effort, making the line the busiest it had ever been. The profits from this, and the later 1950 / '60's movie companies use of the stunningly scenic "High Line" line for motion pictures saved the line. When the good times started to dim in the early 1970's, the railroad was jointly bought by the states of Kansas, Oklahoma, Colorado, & New Mexico for tourists, occasional movie trains, and the freight that still used the line, as the original stock broker consortium had by then been dissolved. The "new" WXYZ railroad, (the town names were shortened to just the initials for simplicity's sake) was thus founded in March 1st, 1971. It has been running, mostly non-stop and is closed during the three winter months of December, January, and February for running of the single remaining rotary snowplow to get the line ready for opening day on March 1st of every year since the early 1970's. (NOTES from the writer: Only Wichita (Kansas) and Xenia (Illinois) are real-world towns, with them being based in name ONLY on real places. Yazoo, for example, is really a river in the state of Mississippi, while Zehyrus was simply because I needed a "Z" name that sounded plausible, and the Colorado Zephyr train was on my mind at the time. The rest of the story is also fiction, as no Garratt ever rode the rails of North America.... ever. Also, the WXYZ logo is an old Union Pacific logo from the early 1910's, while the railroad name's initials have never been used ANYWHERE on a railroad in the USA.) EDITED 8/3/21: added screenshots of engine No. 9 and it's train. I still need to take real-life photos of the private car and 4-2-4T, and now the blue 4-4-0 and it's freight train require photos too.

Presenting a Dutch version of my DSB Litra MK - thanks to UrbanErwin for giving me this idea NedTrain Vossloh G 400 B My model: Scale: 1:45 Length: 27 studs Width: 8 studs Bricks: 640 Locomotion: 1 x M-motor (PF) Gear ratio: 1:1 Power: 1 x 9v battery with 1 x PF custom adapter Control: SBrick Designed: 2020 (Slightly) updated: 2023 Very high setting render from Stud.io with custom decals done in the PartDesigner tool. Left: Central coupling arm on without any wagons. Right: Central coupling arm replaced with a coupling magnet when pulling or pusing wagons. Interior with placement of the SBrick, M-motor and 9v battery: On a tableau at exhibitions: The railing can only be made in Dark Green using BlueBrixx parts for now. Change all Dark Green to Dark Turquoise and the railing can be made using genuine LEGO parts.

Presenting another of my Danish State Railways’ (DSB) locomotives - redesigned from 7-wide to 8-wide and digitally rendered but already built and tested DSB Litra MK The Danish State Railways (DSB) first radio control shunter Litra MK was built by Siemens/Vossloh in Germany as type VSFT G322. 25 were built from 1996 to 1998. All but one shunter were transferred to DSB subsidiary Railion in 2001 and DB Schenker Rail in 2007. My model: DSB Gods version. Scale: 1:45 Length: 27 studs Width: 8 studs Bricks: 586 Locomotion: 1 x M-motor (PF) Gear ratio: 1:1 Power: 1 x 9v battery with 1 x PF custom adapter Control: SBrick Designed: 2020 (third attempt at the class) (Very slightly) updated: 2023 Very high setting render from Stud.io with custom decals added in the PartDesigner tool. Rear with the hidden SBrick inside: Removable hood for easy placement of the 9v battery inside - likely a 800 mAh rechargeable Li-Po one: The mechanical power transmission technique with 1:1 gearing: On a tableau at exhibitions: Link to my NedTrain Vossloh G 400 B and other liveries based on my design My earlier 7-wide version was rather fragile and prone to implosions when handled wrong but this time around the construction is pretty solid and the mechanical power transmission much better with surprising pulling capability. Long live 8-wide

Good evening community, Today i want to present our latest realized model. The XII H2 was especially designed for the hilly terrain of saxony. It has been built in Chemnitz between 1910 and 1927. The model consists of approx 1121 parts and it´s about 58 studs long. The model is a customer-wish and it´s designed for a motorization with power-functions as well as powered-up and for sure with the old 9V train-motor. All the electronics like motor, battery-box and IR-reciever take place in the large coal-tender. All the wheels are from Big Ben Bricks. The main wheels are XL-drivers, the wheels on the front-bogie are medium and at the tender are small train wheels. To make this locomotive with the low hanging cylinders suitable for curves, i separated the cylinders horizontally. The upper part is fixed to the main frame and the lower part is connected to the bogie and could swivel left and right. Special attention was paid to the boiler with the golden rings and the golden accents like in the example. The technic to create the boiler rings was taken over from the DR BR 01 of Simon Jakobi (Dr.Snotson). The instruction of the DR BR 38.2-3 is no available on our website. As a speciality i also want to use this opportunity to present our latest news. Since November the 1st we offer different 3D-printed components in our shop too. We offer different rod-designs in various dimensions, as well as rod sets or special components like blind-wheels or customer solutions. This offer is probably most interresting for customers in europe because we´re located in Germany but we ship worldwide too. And here with custom 3D printed parts.

Here is my first go at building a 10 wide locomotive with full interior.

Heavily inspired by @Electricsteam's long-awaited in-the-brick Atomic Streamliner project, (as seen here in this thread) I have designed my own Atomic-Age wonder called "Nucleus". It is, as the inspirational original builder once said "a fission powered turbine loco" with 4-4-2 Atlantic wheel arrangement. The Nexus Force logo piece goes on both sides of the locomotive's tender. Nucleus is owned by the Neo Nexus Force, and is a retro-futuristic stream-liner mix of old-style 2-rail technology, but with hyper-modern safety features designed specifically for use by Nexus Force personnel as a very high-speed, high-security ground transport between the northern-most city of St. Nicklaus and north-pole-hugging outpost of Ice Station Odyssey, around 590 miles away. (this all takes places on the ice-bound planet of Beta Polaris, which orbits what we here call the North Star, far away from Earth.) Thus this makes it a space train! Unlike the slower Earth trains, the Nucleus type of space-train is super-streamlined, and can go up to speeds of up to 160 MPH on it's special track, with super-elevated curves and long straight-away's over hundreds of miles, all while using Positive Train Control (PTC) on the the mostly double-track mainline, where all vehicle crossings are flyovers and switches virtually non-existent once out of St. Nicklaus city limits. This train runs along with seven identical versions of the train on the route with up to five in running order on the route and at least one in the maintenance shed / in emergency backup storage at any one time. They are named / numbered Nucleus 1 through 6. The baggage car, which usually holds anything from sled dogs in crates, to core samples of millennia-old meteorites bound for labs under armed guard. All the doors on this model open up, as shown. (The rest of the passenger cars doors on the the other cars open too, but it's only here you will see it being shown!) The passenger cars come in groups of two, jointed together by a Jacobs bogie in the middle. The observation car at the rear of the train. This train will go nicely with my Nexus Force moon base, plus my other, Classic Space themed train based on the Aerotrain, called the Astrotrain. The Nucleus train probably won't be built for a while, (orange isn't a cheap color!) but it's at least on my radar. Once again, a hearty thanks to @Electricsteam for his wonderful eight-wide model, as it inspired my six-wide one. As usual, comments, questions, and complaints are always welcome!

I saw a few posts about folks wanting to see some more photos of the winners of the 2020 Brick Train Awards. I would like to present the regional winner of the Best Steam Locomotive category of the 2020 Brick Train Awards. Presenting the Chicago Burlington & Quincy 2-8-2 Mikado! A bit about why I choose to model this engine. I live long the "Racetrack" a stretch of triple-track mainline between Chicago and Aurora Illinois and wanted to model something steam closer to home to the Chicago Burlington & Quincy Railroad was the natural choice. I have a Big Boy, Emerald Night, Disney Train so I have smaller and very big engines covered. I need to fill the mid-size freight engine gap. While doing some research I found a CB&Q 2-8-2 Mikado that survived scrapping and that was actually in service! It was engine number 4960. A bit about the prototype. Engine # 4960 was among the last batch of Mikados purchased by the CB&Q. It was built in August of 1923 and part of the class O1-A. These were well balanced, easily fired, and well liked by their crews. They were replaced with diesels during the Transition era. 4960 was retired from freight service in 1957 and selected for the Burlington's Steam program which ran until 1966. During this time she pulled excursion trains around the Chicago area as the Burlington was headquartered in Aurora at the time. When the program was cancelled 4960 was sold to the Mid-Continental Railway Museum in North Freedom Wisconsin where she sat for a while. Fast Forward to 1981. The Bristol and Western Tourist Railroad was getting started and leased 4960 and restored her. 4960's time with the Bristol and Western was cut short due to bankruptcy. The engineer and fireman that ran 4960 went on to work for the Grand Canyon Railway but kept thinking about 4960. They convinced the GCRR to purchase 4960 where it she was restored and received a face-lift as well. 4960 was converted to burn waste cooking oil and periodically pulls tourist trains from Williams Arizona to the Grand Canyon. A bit about the build. This was a fun and challenging build requiring a lot of new techniques to accomplish the look and different aspects. I wanted to make this a functional engine that I could play with, but also a detailed engine that I could proudly display in my living room. This is a PowerFunctions engine and has 2 L motors in the boiler along with the receiver. The battery, naturally, is in the tender. I almost did not include the brick-built canvas curtains in back of the cab but @Roadmonkeytj really encouraged me to keep them, and I'm so glad he did. I really was not planning to submit this to the 2020 Brick Train Awards because i was waiting for decals and a couple parts to finish it so I submitted it as a digital build with a work-in-progress photo and a test run video. I was quite surprised to see that I won! See the announcement here at Brick Model Railroader. Now the fun bit, the photos! Render of the BTA Entry Questions, comments are welcome! Thanks for visiting! ALCO

I've been split in scale since I began building LEGO trains with all my shunters, freight wagons and latest passenger train being 7-wide or 1:54 and all my older locomotives and passenger wagons being 6-wide or 1:60. With almost all of my buildings close to true minifig-scale, I've been contemplating to unify my scale for a few years now but I couldn't decide to go for either 7 or 8-wide...in addition to being pretty much satisfied with most of my 6-wide models as they are. Well, no more Presenting my favourite Danish State Railways’ (DSB) locomotive redesigned to 8-wide and digitally rendered in two versions and liveries... DSB Litra MZ The powerful Litra MZ locomotives were built by Swedish Nydquist & Holm AB (Nohab) and Danish subcontractors on license from General Motors. 10 MZ (I) were built from 1967-1969. 20 MZ (III) were built from 1972-1974. 61 in total were built across all four variants (I-IV). Quite a few are still used today by private railway companies either domestic or abroad, in Iran, Norway and Australia. My model of DSB Litra MZ (I): DSB maroon livery used in the 1960/70s with the highly recognizable crown and wing logo on the front. Scale: 1:46 Length: 56 studs from buffer to buffer Width: 8 bricks Bricks: 1.264 Powered: 2 x L-motors, 2 x AAA battery boxes + 2 x SBricks, 1 x AAA battery box + 1 x SBrick/PFx Brick or 2 x BuWizz battery boxes Control: PF with SBrick, PFx Brick or BuWizz Designed: 2020 My older 6-wide version from 2016: https://www.eurobricks.com/forum/index.php?/forums/topic/119474-moc-the-danish-state-railways-dsb-locomotive-litra-mz-i/ All renders are done on the very high setting in Stud.io with all of my own custom decals added in the PartDesigner tool. Upgearing from 20 to 12 teeth with a ratio of 5:3....more speed, less power PF L-motor design with good advice from some of the Brick Train Depot guys. Credit to Duq for coming up with the original idea of using the T-piece. 3-axled bogie: The center wheel will utilize a black hockey puck as a blind driver or a 2 x 2 round tile with open stud and 1 x 1 round tile placed on top on it as the alternative. https://www.bricklink.com/v2/catalog/catalogitem.page?P=47576#T=C My model of DSB Litra MZ (III): DSB "modern" red & black livery used in the 1980s. Scale: 1:46 Length: 56 studs from buffer to buffer Width: 8 bricks Bricks: 1.331 Powered: 2 x L-motors, 2 x AAA battery boxes + 2 x SBricks, 1 x AAA battery box + 1 x SBrick/PFx Brick or 2 x BuWizz battery boxes Control: PF with SBrick, PFx Brick or BuWizz Designed: 2020 My older 6-wide version from 2011 and redesigned in 2015: https://www.eurobricks.com/forum/index.php?/forums/topic/172599-moc-herningværket-vestkraft-is-complete-set-of-locomotives-and-wagons Part of the fun and what set LEGO trains apart from pure model railroading is the inclusion of minifigs, so whenever and whatever I always try to make space for them and also keep on some play features and interiors. The 8-wide body is quite roomy and has a fairly correct interior. 2 x PF L-motors with either 2 x AAA battery boxes + 2 x SBricks, 1 x AAA battery box + 1 x SBrick/PFx Brick or 2 x BuWizz battery boxes can be utilized: Both locomotives with DSB Litra MZ (I) in front of the later version DSB Litra MZ (III) in the background: Technical addendum: For the first time ever I have used technical drawings overlayed with LEGO scaled grids to get the dimensions right or as close to right as possible. The models haven't been built yet but some smaller builds have been used for testing during the design phase. My slightly shorter test train didn’t really like driving through R40 curves, no surprise there Too much length overall and the wheel sets in both ends of the bogies are also pretty far from each other producing some drag. Going through isn't impossible though but rather uneven and a tiny bit struggling, especially with added wagons. There are no problems driving on straight tracks and through larger radii curves. To my surprise however was the finding that the total number of parts were the same or even slightly less than a similar 7-wide model So henceforth, 8-wide it is

The Boston and Albany had two wheel-arrangements that were used in their Suburban tank locomotives the 2-6-6t: In 1906 the Boston & Albany received ten 2-6-6T locomotives built by Schenectady followed by eight more in 1907 designated Class L-1a and L-1b. The tank engines had 20x24 inch cylinders, 63-inch drivers, and operated off 185 lbs. of boiler pressure. During 1928-1931 Lima rebuilt the engines with superheaters, increased the cylinder bore to 23 inches, and the boiler pressure to 200 lbs. The rebuilding produced a substantially more powerful engine. The rebuilt locomotives became Class L-3 and L-3a and when 4-8-2's were delivered in 1940 as that class, they were reclassified D-2a and D-2b. After that, the B&A came out with a class of 4-6-6t locomotives: In need of specialized locomotives for its Boston commuter service, the Boston & Albany purchased five 4-6-6T locomotives from Alco in 1928. The locomotives were designed for rapid acceleration, adequate power for heavy trains of up to 20 cars and perhaps most uniquely – to be operated equally well in either forward or reverse. Not having to turn the locomotives at the end of the line saved space and cost and also a lot of time. The locomotives bore a strong resemblance to the New York Central's Hudson in the front, with a small attached "tender" behind the cab riding on a shared 6-wheel trailing truck. Coal and water capacity was adequate for the commuter runs. The D1-A class served the railroad and Boston's workers well for two decades before being replaced by diesels. Although these locomotives were unique to the B&A / NYC, there were similar designs used on other railroads with the same needs. My Model: I'm still waiting for side rods which I will 3d print at my library after COVID is over. The model took me 4ish months to build A lot of parts Many modified bricks Powered with an L-motor geared 1:1 Entered in the Brick Train Awards under the 'Teen' Catagory D1a 4-6-6t Brick Train Awards by Coal Fired Bricks, on Flickr D1a 4-6-6t Brick Train Awards by Coal Fired Bricks, on Flickr D1a 4-6-6t Brick Train Awards by Coal Fired Bricks, on Flickr D1a 4-6-6t Brick Train Awards by Coal Fired Bricks, on Flickr Comments, Questions, Praze, and all critical thinking are welcome. Bye Bye everybody, Cole (the name I own on my birth certificate)

I have started making the HLE 25 from the NMBS for my NS, NMBS Benelux train set. This was a bit of a challenge because of the sloped front. I'm posting this to show you the progress and for feedback. I have the idea that mine looks different than the real thing. 8-wide would be easier to make more details but I decided to stick to 6-wide. The inverted slopes behind the front coupling are attached to the bogie. Also a small detail that is hard to make is the yellow line. Because of the 2 x 1 x 2 slopes I can't make a yellow line. If anyone has some ideas for me or things that I can do to make it look better, feel free to tell me (Also, this engine will be made specially to be fitted with PF)