Search the Community
Showing results for tags '4-6-0'.
Found 9 results
Eight-wide steam engines and rolling stock of the WXYZ Railroad Wild West MOCs
Murdoch17 posted a topic in LEGO Train TechIn this latest model series, I decided in order to keep the "toy like" proportions of it's inspirational genesis, set 71044. (Disney train) Now, people who know my design style are probably scratching there heads right now in confusion, as I don't EVER build in 8-wide for trains. But in order to make it look as good as possible with the original 2010 Toy Story figures and their stretched appendages, I had to do 8-wide. My current setup... minus a few things on the other table not shown. This scene will change, as the freight 4-4-0 needs revision on the tender, and the passenger 2-6-0 and it's train need heavy work done, as you will see! Loco Number 1 - 2-6-0 Mogul w/ passenger train This 1890's style train is to be pulled by my revised Western 2-6-0 steam loco, and will be made from my older three yellow train cars. These newer cars are four studs shorter, so I can fit a fourth car in the storage box with the extra space. Also, the sidewall closest to the camera comes off on all the cars so you can get at the inside details. The coal-burning straight stack-styled locomotive is a mish-mash of two steam locomotives, the 4-4-0 from the Toy Story 7597 set and a British 2-6-0 train model designed by Block Junction. I repainted the British engine into a Toy-ish color scheme, then added 8-wide late 1800's American-style features with printed parts from set 7597. Oh, and I built a brand new small size tender from the rails up, which uses new red wheels from BrickTracks.. The rear of the engine features a coal tender with a ladder from the water tank-top down to the magnetic coupler. This tender is smaller than before, as it looked very silly next to my 2-6-0 IRL, and even worse next to my blue Western 4-4-0, which currently has an exact copy of the earlier tender version as well. The baggage car features two sliding freight doors in red along with two non-functional passenger doors in black. The side wall comes off, as it does on all the cars, to reveal seating. In this car, that means lots of luggage room and two seats. The two coaches are identical in every way, and are also quite similar to the parlor car at first glance. The inside features side seating, as in LEGO set 71044's Lilly Belle car... this also allows for easier moving of figures, and placing them in any of the five seats per car. The observation car features a rear platform, plus a red drumhead ready for the train's logo. The inside is the same as the two coaches, with five seats. Loco Number 2 - 4-4-0 American w/ freight train This freight-hauling locomotive is meant to be built from sets 7597 (Western train Chase from Toy Story 3), 71044, (Disney Train and Station) and set 10014. (Caboose from the My Own Train series, albeit a bit bigger width-wise!) I also used set 10013 (Open Freight Wagon, also from My Own Train) as a guide for the pipe-carrying car, plus model 15 (Tanker) from set 10183, Hobby Trains for the tanker car. This loco shares the same tender as my other Western 8-wdie loco from this time period. The engine itself, however, is an enlarged version of 7597, in yellow and blue. It's also meant to have inside pistons as it's an early-to-mid 1860's locomotive. (thus the lack of visible pistons!) The locomotive is missing these printed parts. They are as follows: The four yellow 1 x 6 bricks are supposed to be printed with this number 2. while the headlamp is supposed to have two of these printed yellow 1 x 1 tiles. The firebox door requires this print. This boxcar is an enlarged to 8-wide and recolored boxcar from set 3677 (2011's Red Cargo Train). The printed doors (not shown) and from set 7597. (2011's Western Train Chase) The coal-filled 8-wide gondola was inspired by a sub model from set 10183. (2007's Hobby train) This water tanker is a version modified of set 2126's (Train Cars) design with newer reddish brown tanks instead of the vintage 1998 brown of the original model, and now in 8-wide. This model was built from instructions seen at the Old Workhorse's Lego Ideas page as seen here. (I am not affiliated with the creator of that page, I just used their free instructions, visible further down in the updates section, to build the traction engine seen here.) This car is a mashup of set 10013 (2001's Open Freight Wagon) and the bed area from set 60059. (2014's Logging Truck) This caboose was inspired by set 10014 (Caboose) except this versions is 8 wide and the main two colors are reversed. Loco Number 3 - 4-10-0 Super Mastodon w/ military train This entire eight-wide military transport train was inspired by sets 71044, 60052, 79106, and 79111. It is inspired by the 1975 film "Breakheart Pass", which features an US Army resupply train traveling to a Western frontier Fort under siege. This train also has a couple play features, such as a rotating Gatling gun, moving steam engine side rods, and a exploding jail car wall, among a few others. This engine is basically a stretched version of my Western 2-8-0, with another driving axle and a four wheel truck in front. The wheel diagram show which six wheels will be blind and which four will be have a flange. I've tried a similar (albeit reversed) setup on my UK 2-10-0, so I know the wheel arrangement works in it's basics, I'm just not sure how the magnetic coupler will like this new arrangement. (My 2-10-0 doesn't like having a magnet, so it's hard-connected to the tender by a lift-arm on that MOC.) I included the working pistons, and a more cohesive color scheme of red and green, with a splash of yellow as on the previous 2-8-0 steamer. Big Ben bricks' medium size wheels, 4 with flange and 6 blind, are meant to take the place of the gear wheels in the order shown above. You can buy them at his site here. The tender and cab walls are supposed to have four of this printed red 1 x 6 piece inserted into them: The front headlight is supposed to have two of this printed 1 x 1 placed on it. This horse car was originally a cattle car from set 60052, (2014 Cargo Train) but I've re-purposed it for my Army officer horses. These cannons are from set 79106 (Calvary Builder Set) and were placed on a generic two-axle flatcar for transport by rail. The rotating Gatling gun you see here was taken from set 79111. (Constitution Train Chase) This car has the basic "look" of the Lily Belle parlor car from 71044, (Disney train and station) but is less ornately furnished due to be a second-hand coach refurbished cheaply for use by the US Army of the 1880's. The right-side wall is removable for access to the inside. The jail / baggage car you see was originally from set 79111, (Constitution Train Chase) with the basic coach styling of set 71044. This car has one play feature that is sure to blow you away: the back wall can be removed to get at the jail cell via the "dynamite" on the outside of the back wall. When pushed back towards the other end of the car, the lever on the left side pops the back wall out and the bad guys can escape! Also, the right-side wall is removable for access to the inside. Loco Number 4 - 2-8-0+0-8-2 Garratt w/ rotary snowplow train This blue train is marked (2-8-0+0-8-2 Garratt, for heavy duty rotary snow plow jobs) number 4, and joins the family of similar mid-1880's engines such as the large 2-8-0 for military transport, the inside-piston 4-4-0 for freight, and the fancy 4-6-0 for passengers. This 8-wide Garratt-type steam locomotive is perfect for use on the mountainous terrain of Colorado Rocky Mountains, with it's double steam locomotive pistons sets. (Before anyone says anything about Garratt loco's not being ever sold into the North American market, I'll say it's an lost experimental prototype to help with a motive power shortage. It may have been seen by the owner as a economical way of sending one locomotive to do the job of two.) This steam powered rotary snowplow was inspired by the real-world Denver and Rio Grande's narrow gauge plow "OY", as now seen on the Cumbres and Toltec RR in New Mexico / Colorado. I've decided to name my plow "YO" in tribute to my inspiration, using four of this part from the original Toy Story sets as a sort of marker. The rear of the plow features the coal tender. This 8-wide engine was originally a SRW locomotive works product, (made by Anthony Sava and formerly available on Bricklink until LEGO sadly removed most of his models.) I reworked the engine to have working pistons and side-rods plus a longer frame. This made it from 2-4-0+0-4-2 to a 2-8-0+0-8-2, among other smaller updates to the engine. I also substituted a Disney train-style boiler onto the engine to backdate it to the mid-1880's or so. Even with the added pistons, the engine can go around corners and switches quite easily. A simple caboose, for the snow plow train. I used a pair interesting windscreen parts for the cupola windows. Loco Number 5 - 0-6-0ST shop switcher Locomotive number 5 is an eight wide model of a generic 0-6-0 saddle tank steam engine from the later half of the 19th century, and was inspired by a @ScotNick build of Stanley from Thomas and Friends for the stripe work, and this build of Percy (also from Thomas) from the L Gauge site for the front of the boiler/ piston assembly. Here is the coal bunker / driving controls shot for this 8-wide yard goat. NOTE: The color scheme is red and yellow, though sadly here red looks pink. Loco Number 6 - 4-2-4T w/ RR office car I created a more realistic version of the 2016 Winter Village holiday train (set 10254) for all the train fans who didn't like the engine. I added working pistons, and more colorful (and less festive!) color scheme plus two more sets of fuel bunker-based wheels on the rear of the engine. The accompanying business car is for the WXYZ railroad president, and features a accessible interior, like the Disney Train (set 71044) it's modeled after. This private car has been given the name "Mount Clutchmore", after the tallest peak and highest point on the WXYZ line, at the tunnel under said mountain in Colorado. This locomotive is modeled after the unique C.P. Huntington of the Central Pacific railroad. The model will be numbered 6 for use on my Wild West railroad, and and features a (small) balloon stack, yellow and blue paint scheme, with red accents. This railroad office car is modeled after the dark red observation car as seen in the Disney Train LEGO set. It has been changed to a blue paint scheme, with red doors/ windows and brown trim, with a black roof. As the car has been stretched by four studs to fit the longer frame, there is more room inside. The Mount Clutchmore office car features three chairs, a table with drinks for investors / newspaper reporters, and a planter on a table at the rear-most end. Almost the whole wall is removable to get at these inside details. Loco Number 7 - Automotive Rail-Speeder The early '50's automotive rail-speeder is inspired by this fairly recent @hachiroku build here and by @Cale's pictures of Ma & Pa RR 101 as seen here. The vehicle is numbered "7", for use on the WXYZ Railroad, and rolls quite well on the track with no problems in stock switches or standard R40 curves. The rear has two coverings almost fully obscuring the rear wheels, in true retro style. This model is designed for track inspector's and high-up executive's to get up close and personal with the railroad. The roof is removable and the doors open, with seating for two figures side-by-side. Loco Number 8 - Galloping Goose (freight version) This Galloping Goose's front half was inspired by @hachiroku and his Indiana Jones staff car MOC, as seen here. The rear of Number 8, with all the doors open. Loco Number 9 - 2-4-0 Old English w/ silver ore and mine payroll train This very short train is based off set 7597, Toy Story 3's Western Train Chase, which my dad purchased for my birthday gift for later this year. I digitally converted the 4-4-0 "American" into a 2-4-0 "Old English" type which I then based off the real world 2-4-0 'Montezuma'. That 1871-vintage engine was the Denver & Rio Grande's first steamer. (which was the basis for the fourth Disneyland loco, the Ernest S. Marsh, by the way.) I had a real urge to name the LEGO version of the engine after Achu, the South-American tribal leader from the Adventurers' "Jungle" subtheme as a tribute to the real-world Montezuma engine and it's namesake Aztec leader. But I didn't think anyone would get the reference, so I didn't... at least not yet! The locomotive as it will be later in the year. I used the basic look of the Disney set 71044's engine for the two wheel tender, as it was too good an opportunity to pass up. (and it's accurate to the real engine it's based on, too!) I also managed to add working pistons, though quartering was not possible, sadly. The rear view of the engine, which will be numbered 9 in my numbering scheme for the Wild West-era W.X.Y. & Z. Railway. (This means it is replacing the 2-6-2 loco on the wanted list.) These three silver ore cars are taking their loads to the U.S. Mint in Denver to be made into coins. The mine payroll boxcar will feature dollars signs on the doors, as in the Toy Story 3 set. The caboose will have printed parts on the sides, saying "GREAT WEST". The inside with the roof removed. The Wichita Xenia Yazoo & Zephyrus Rail-Road (Stock market trade name WXYZRR) was a mid-19th / early 20th century enterprise also known as the Wasted, eXausted, Y bother & Z*. (*No one could figure out an insult to the railroad that started with the letter "Z") The railroad started in Wichita, Kansas in 1868, then went straight through Xenia, Oklahoma, while then meandering into Yazoo, Colorado and barely making it into Zephyrus, New Mexico by 1875. Other stations included several army forts dotted along the route through Oklahoma and Colorado, along with scattered mining camps and agricultural towns across the maps of New Mexico, Oklahoma, and Kansas. The railroad is hardly mentioned anywhere in writings of journalists, except in scathing "letters to the editor" of various newspapers about lack of the promised service on the line in the early years. Also, the much derided company slogan "last railroad you'll ever need" did not work out well for the new railroad, but it did vastly increase questions fielded to the main office about coffin, headstone, and various other memorial shipments from all over the area from which the railroad served. It is therefore shocking the railroad lasted as long as it did, a substantial fifty-six years from incorporation in 1867, to it's sale at auction in 1923! The old WXY&Z railroad had about 35 locomotives on the books at the maximum, but most of these were already very old when purchased and broke down frequently so they were chronically in the workshop for some reason or another. In fact, the seven additional 4-4-0 locomotives purchased third-hand from engine dealers were of the long-obsolete inside-piston variety of the mid-1850's, yet were bought in the early 1870's! However, what the railroad lacked in regular service motive power, it made up for in the snow plow-train department. A single prototype of what would later be called a "Garratt" (a doubled-power-unit steam loco with a single boiler not normally found in North America) was first run on the "High Line" between Fort Legoredo, Colorado and Glencoe, New Mexico in the steep Rocky Mountains. This is where the railroad really shined, in keeping the trains running through steep mountain passes with a single experimental train with a rotary snowplow at the head end... of course, there were other plow trains, but only two rotary trains. (One would work from either end of the Glacier Gulch Pass, and meet in the middle on a passing siding. The Garrett would be on one train, and two regular locomotives pushing the other.) After 1923's closing of the railroad, it was bought wholesale by a consortium of stock brokers from Denver, with plans to redo the line with less sharp grades and more snow sheds. However, during this reconstruction, the 1929 Great Depression began, leaving half the line with old grades though most of Colorado mountains, but new grades on New Mexico were finished in time. The passenger car fleet was upgraded, but the freight engines (downgraded passenger power, really) and rotary plows remained vintage as far back as 1878 for motive power. The older inside-piston locomotives went for sale once the Depression really started up, and one was snapped up for a potential history museum in Glencoe, while the rest were scrapped. Then, a miracle happened: the movie industry intervened, and several production houses bought some of the oldest rolling stock, engines, and the line was given enough cash to stave off it's dismantlement until 1941, when trains of heavy munitions from companies on the line came rolling through for the War effort, making the line the busiest it had ever been. The profits from this, and the later 1950 / '60's movie companies use of the stunningly scenic "High Line" line for motion pictures saved the line. When the good times started to dim in the early 1970's, the railroad was jointly bought by the states of Kansas, Oklahoma, Colorado, & New Mexico for tourists, occasional movie trains, and the freight that still used the line, as the original stock broker consortium had by then been dissolved. The "new" WXYZ railroad, (the town names were shortened to just the initials for simplicity's sake) was thus founded in March 1st, 1971. It has been running, mostly non-stop and is closed during the three winter months of December, January, and February for running of the single remaining rotary snowplow to get the line ready for opening day on March 1st of every year since the early 1970's. (NOTES from the writer: Only Wichita (Kansas) and Xenia (Illinois) are real-world towns, with them being based in name ONLY on real places. Yazoo, for example, is really a river in the state of Mississippi, while Zehyrus was simply because I needed a "Z" name that sounded plausible, and the Colorado Zephyr train was on my mind at the time. The rest of the story is also fiction, as no Garratt ever rode the rails of North America.... ever. Also, the WXYZ logo is an old Union Pacific logo from the early 1910's, while the railroad name's initials have never been used ANYWHERE on a railroad in the USA.) EDITED 8/3/21: added screenshots of engine No. 9 and it's train. I still need to take real-life photos of the private car and 4-2-4T, and now the blue 4-4-0 and it's freight train require photos too.
LB&SC Railway 4-6-0 mixed traffic steam locomotive with four passenger coaches
Murdoch17 posted a topic in LEGO Train TechThe engine seen below originally came as a generic British 2-6-0 from the Block Junction website, to which I added two extra leading wheels and a new paint scheme inspired by that found on London, Brighton, and South Coast Railway locomotives around the turn of the 20th century. But wait, you say, there were no 4-6-0's in that time period on that railway, or even ever painted in that scheme later on! I know that, consider this a experimental one-off that was a hushed-up trial in superheating. (or something similar they were trying back then) Anyway, a group of close friends and business leaders bought the one-off loco from a backlogged scrap dealer in the early 1930's and preserved it. (These people later became the LEGO Rail Transportation Society in the late 1940's, saving more and more rolling stock and locomotives before saving a to-be-torn-up branch line during the Beeching Cuts of the mid-1960's.) The engine was repainted to LBSC colors somewhere in that time, and re-allocated it's old number X1, designating it as a experimental engine. Over the years, the engine was restored to working order, and had it's troublesome super-heater removed entirely and replaced with a better one. It now runs as a mixed-traffic loco, puling tourist passenger and freight trains alike, just as it was designed to do in the late 1890's / early 1900's. The letters LBSC will go on the tender walls, while the engine will feature X1 on it's side. The block junction page I bought the original 2-6-0 from is seen here. Close-up view of the three passenger coaches, from which Annie and Clarabel (from The Railway Series / Thomas and Friends) contributed their designs to the look of. …and here is a close-up view of the guard's coach, which features a compartment for luggage and the guard himself. (That's a UK version of what we call the Conductor here in the States.) NOTES: Now, I know the coaches are a bit short in height by a single brick (or is the loco to tall?) but otherwise it looks odd if I change it to be taller / shorter. Any thoughts, comments, or suggestions? They are all welcome!
Hogwarts Express with Hogsmeade station (real world MOC and a LDD WIP)
Murdoch17 posted a topic in LEGO Train TechSince the 2018 Hogwarts Express (set 75955) is lacking in realism, (with the engine and tender in particular!) I decided to revise my custom version with ideas from the set, including printed 1x4 curve tiles with Hogwarts Castle printed on them. The locomotive is a heavily modified version of LDDModelmaker's Black 5 model with some parts from set 79111, Constitution Train Chase. The tender features a three wheeled bogie design modified from the one in Anthony Sava's ALCO MRS-1. The middle axle moves side to side, as to allow going through switches and curves without issue. The inside of the cab features two gauges and the firebox. In this false-color image, the red parts slide, the blue ones stay put to allow for the loco to go around curves and switches. (BTW: There are parts underneath that keep the sliding bogie from falling out.) The roof and side wall of each coach come off independently from each other, to reveal four seats for students and / or the occasional teacher. The Hogwarts Express is usually made up of four corridor BR MK I passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. (however, in this Lego design, they are all open floor plan!) Also, the end car is not accurate to the films, but is what I prefer to the alternative: a gangway leading nowhere with no red light on the end. In-universe / Film History for the Hogwarts Express: Leaving from Kings Cross' Platform 9 & 3/4 to Hogsmeade Station at exactly 9 AM, the Hogwarts Express carries students (and sometimes faculty) to and from Hogwarts' School of Witchcraft & Wizardry in the Harry Potter series of books and movies. It has been seen in every Harry Potter film, from it's first appearance in the beginning of Philosophers Stone to it's (so far) last at the end of Deathly Hallows. (part two) The Hogwarts Express is usually only in the film for a short while, and it is generally a pleasant journey from Kings Cross to Hogsmeade, although Harry Potter, Ron Weasley and a certain Flying Ford Anglia might beg to differ! This 100% fictional version of Hogsmeade station (as in, not really based on any of the Harry Potter films) was inspired by several sets, mainly set 21324 (123 Sesame Street) and bits of my older Hogsmeade station MOCs from years past. The model is modular, and features a detachable track-side platform, ground floor, second floor, and roof. The platform is five tracks long, and starts three studs away from the rail head, making it a breeze for larger engines with wider pistons to pass through unrestricted. The street side features the same basic look as the other side, but in this case their is a staircase.... which could cause a problem for luggage trolleys as their is no ramp! As also used on the rail side, this Hogsmeade 1 x 4 tile should be placed on the four exposed studs on the second floor. The upper floor features the station master's office with an little break room for an off-duty engine crewman to sleep in. Also up here is a fireplace and two desks, one of which has an oil lamp on it. The lower floor features a bench for passengers out of the Scottish fog and rain. Also, the two ticket booth's share a single cash register, so the two ticket agents best be extra sure how much money goes where and who did what! Every floor & platform is grouped separately in LDD, as shown here. As usual, comments, questions, suggestions, and complaints are always welcome! EDIT 10/27/2020: Hogsmeade station LDD model replaced, screenshots and words updated accordingly. Real life pictures coming eventually. (Hopefully soon!)
Here are all the pictures of my (and a few other members of Gateway Lego User Group) Wild West era-stuff on display at Our Lady of the Snows' Way of Lights display, in Belleville, Illinois until December 31st. (excluding Christmas and New-Years eve, they are closed those nights.) These only are some of models I have been making since 2014, more can be found in this thread here. There are a ton more tables (and themes!) at the show, so come on down to view them all, this is only a small inkling of what's there! (sorry mod's, had to do that last bit.) US army Fort Legoredo, circa mid-1885. The town of Legoredo, part 1: general store (in front, next to fort) Doc Brown's saloon, (corner lot) train station (obviously placed) The town of Legoredo, part 2. post office (in white with red flags) Sheriff Woody's lockup (next to the water tower) barber shop (with the deck on the second floor) Bank (the big impressive building) blacksmith's shop (small shack across from the bank) rear-wheel steamboat Proud Mary and the Boulder Cliff Canyon through-truss bridge. Also, Stinky Pete's house nearby. Rapid River Village, part 1. The posse is chasing down the escaping convicts on the handcar, while the train is making up for lost time and might beat both of them! (I was inspired by the 1990's LEGO Loco video game opening cinematic with the handcar being chased by the train, if you couldn't tell.) Rapid River Village - part 2, with skull butte and the village elder's tepee's on top. Also, see if you can spot the tail end of the Delorean time machine in the tunnel! NOTE: This is not all my stuff - the Indian village on the tan base-plates was designed by Gateway LUG member Chris Curtis, and the red stagecoach was brought in by a third member. My father designed the three elevated wooden box-risers next to the skull mountain, under the cubed tan felt. Any thoughts, comments, or suggestions? Please leave them below!
Western 4-6-0 steam loco and passenger train (real-life) MOCs - 71044 inspired
Murdoch17 posted a topic in LEGO Train TechAs seen here on EuroBricks, user @Carefree_Dude tried his hand at making the new Disney train have working pistons and getting rid of the hideous no-metal-axle wheels. I was very much impressed with the results, and took the pictures and reverse engineered them to have a similar 4-6-0 of my very own. (If the tender looks familiar, it hasn't changed at all from the last version.) However, as you may have noticed, the pistons are different, as they gave me a ton of trouble figuring them out, so I imported a design of my own previous use that I know works. The rear of the loco features a ladder to the tender-top, where the hatch to the water tank is found and also where the neatly stacked wood pile is located . These passenger cars were mostly inspired by set 10014 (Passenger wagon) but repainted red instead of green and with fancy part 30613 "Brick, Arch 3 x 6 x 5 Ornamented" on the end of the cars. I might be mistaken, but Flickr user The Shubes (Isn't he on Eurobricks too?) may have been the one to inspire these coaches with his own red versions of set 10014 as seen here. The end of my passenger train features this little four wheel caboose. It was designed after set 10015 (Caboose) with some features taken from set 7597 (Western Train Chase) This design is now finished in real life, after a record six days from designing on 10 / 20, ordering on 10 / 21, to being built on 10 / 26. That's really fast service by my standards!
Hogwarts Express and 4-6-0 steam loco Hogwarts Castle (5972)
Murdoch17 posted a topic in LEGO Train Tech(Note to mods: please leave this in the train tech forum, as it is be Harry Potter related, but it is more of a train build than anything else. Thanks in advance!) Since the rumor is that Harry Potter is coming back this summer, but without the Hogwarts Express. I thus made my own, but we will see if it gets built in real bricks by summer..... HP universe / Film History: Leaving from Kings Cross' Platform 9 & 3/4 to Hogsmeade Station at exactly 9 AM, the Hogwarts Express carries students (and sometimes faculty) to and from Hogwarts' School of Witchcraft & Wizardry in the Harry Potter series of books and movies. It has been seen in every Harry Potter film, from it's first appearance in the beginning of Philosophers Stone to it's last at the end of Deathly Hallows. (part two) The Hogwarts Express is usually only in the film for a short while, and it is generally a pleasant journey from Kings Cross to Hogsmeade, although Harry Potter, Ron Weasley and a certain Flying Ford Anglia might beg to differ! The Hogwarts Express is usually made up of four corridor passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. The train is supplied with all kinds of goodies and sweets, from Bertie Botts Every Flavor Beans to Chocolate Frogs. The locomotive is a heavily modified version of LDDModelmaker's Black 5 model with some parts from set 79111, Constitution Train Chase. The tender features a three wheeled bogie design modified from the one in Anthony Sava's ALCO MRS-1. The middle axle moves side to side, as to allow going through switches and curves without issue. The numbers 5 9 7 2 go on the sides of the tender... it's not prototypical, I know, but it works well enough. Also, The boiler is a modified version of set 79111's Constitution steam engine. In this false-color image, the red parts slide, the blue ones stay put to allow for the loco to go around curves and switches. (BTW: There are parts underneath that keep the sliding bogie from falling out.) The train is currently made up of five cars that are slightly different than the actual British Railway MK I coaches used in the films. The Hogwarts Express is usually made up of four corridor passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. Also, the end car is not accurate to the films, but is what I prefer to the alternative: a gangway leading nowhere with no red light on the end. the baggage / coach car (known as a combine) three regular coaches guard coach This was made by me in Microsoft Paint sometime in 2014, and was based off a image from a Google search of the Hogwarts Railways logo. EDITED 7/4/2017 to bring up to date with new pictures and ldd file. Model to be built in real life sometime around Christmas 2017. EDITED 1/19/18: Since the rumor is that Harry Potter is coming back this summer, but without the Hogwarts Express. I thus made my own, but we will see if it gets built in real bricks by summer..... Any questions, thoughts, or complaints are welcome!
The Great Train Robbery of 1888 - a comic told in real pictures
Murdoch17 posted a topic in Brick Flicks & Comics(Mods, please note I wasn't sure where to put this, as it's a train / western / comic starring a few licensed Disney characters. Please put it where you think it should go!) In this thrilling tale of 60 miles-per-hour high speed adventure, the outlaw Blackheart Gang) switches a weapons-laden military train onto the same track as a unscheduled special, with disastrous consequences! See each sequence of this horrifying tale in colorized photographs and you too will ride the midnight train to Adventure! 7:07 PM - Denver Colorado: The military train pulled by engine 1 is heading out of the yard and onto the main line towards San Francisco. It is crewed by a small group of soldiers, plus fireman Samuel McGee and engineer Joseph W. Jackson. 8:00PM - Carson City, Nevada In another rail yard, the crew of the unscheduled special charter train pulled by loco number 3 is making sure the engine is spotless and ready to pick up it's party of potential railroad investors. The train is supposed to pass trough Fort Legoredo at 9:30 that evening, where it will let the military train pass by on a side track. 8:40PM - Fort Legoredo While making his hourly rounds, the station master of the Fort's railway station is ambushed by three Blackheart Gang members, and he is relieved of his switch keys. While trying to escape, he trips on an exposed rock and falls, where upon he is then shot dead. 9:23PM The switches are set for the freight train to fall into the hands of the gang, when a different whistle is heard from the other end of the track causing the bandits to hurriedly switch the tracks back to allow the special to pass by. 9:30PM With both train approaching the same switch at the same time, the gang works quickly to allow the passenger train pass by, but still diverting the convoy train. 9:32PM The engineer and fireman of the military train see what is about to happen and jump to the ground with the iron steed still powering on towards the switched track! 9:40PM The train reaches the end of the side track and derails, with steam and steel flying everywhere. Horses and cannons are sent scattered across the tracks, and the sleeping soldiers on-board will never wake again. 10:20PM After stealing all they and their horses can carry, the Blackheart gang set the steam engine to explode, then set off into the darkness. A posse rides out later that night from the local village to check out what made the explosion and they discover the gristly wreck. Meanwhile, out in the desert, the Blackheart gang begin to plan their next move. THE END Any and all thoughts, comments, complaints, and questions are welcome. This non-moving picture was shot on three 6 x 3 foot tables with a cell phone camera and no special effects... just so you know. Thanks for reading!!
Cool Lego 10 Wheeler for Lego Ideas
tweetsie12 posted a topic in LEGO Train TechHey everyone! this is my 1st post! I found this really cool Lego ideas project for a lego 4-6-0 ten wheeler so please help the model get 10,000 supporters! here is the link to the page: https://ideas.lego.com/projects/129767 No, it isn't mine, but I LUV IT!
4-6-0 - first ever engine attempt
Covenant84 posted a topic in LEGO Train TechHi all. Here's my (WIP) first attempt at a steam engine. So far I'm pretty happy with the boiler and tender. The cab, wheels, centre coupling and some details need work but they'll have to wait until I can get more bits. The chasis isn't very strong when handled at the moment, may redesign from scratch. It's also having derailing issues on corners - I think the problems the current centre coupling. C&C welcome.