Search the Community
Showing results for tags 'locomotive'.
Found 189 results
-
Hi everyone This is the first time I've posted a MOC in the train forum and although these models are not trains, they are still locomotives of a sort and I thought this would appeal to train and especially steam fans. "Miniature Steam Machines" is my collection of 3 steam engines designed at a small scale. I set myself a challenge to see if I could build these little engines using a very limited amount of bricks but still maintaining a decent level of detail. They are all very small. The biggest of the 3 models only contains 128 bricks. Traction Engine The Traction Engine is the smallest of the 3 models and only uses 82 bricks. The basic structure of this model forms the basis for all three models and this one in particular is intended to represent a miniature version of my LEGO IDEAS project, The Old Workhorse - Traction Engine. Steam Roller The second model is a steam roller and this one is made from 109 bricks. Showman's Engine The third model is a Showman's Engine. This model is the biggest of the 3 and contains 128 bricks. I designed these mini models to act as a sort of side project and to help promote my LEGO IDEAS model called "The Old Workhorse - Traction Engine". This a much bigger and more detailed model. Here is a picture showing the mini models alongside the Old Workhorse. If you're interested in reading more about The Old Workhorse then it has its own topic here on Eurobricks. The Old Workhorse - Traction Engine If you like the model I'd also be massively grateful if you could please vote for it over on LEGO IDEAS at the following link. https://lego.build/2vRfVGL Many thanks for reading and I hope you like these models.
-
Railroad locomotive XL turntable - 12 outlet tracks and modular control tower
Murdoch17 posted a topic in LEGO Train Tech
Here is my XL turntable, which has 11 dead-end stall tracks and one outlet track. (though it can be reconfigured to be as many or as few tracks as needed). It is spread out over a 64 x 64 XL make-shift base plate size made up of of 4 regular (32 x 32) curved road plates with quite a bit of overhang due to the outlet tracks and tower. The re-purposed signal tower is now being used to control the turn table. This control building is modular, and has a roof and second floor that come off to reveal inside details. The studs on the sides of the building are supposed to spell out the the yard's name, but I haven't decided on a good name yet. If you have any suggestions for a name with 10 letters or less, please post a comment with it below! This table can handle a 4-track long engine (around 64 studs) with a bit of overhang at the ends, such as with my Frisco 1522 4-8-2 steam locomotive as seen above. Diesel A + B unit sets would have to be separated and moved independently, but that's okay and actually accurate for some real world locations / railroads. The basic workhorse of the turntable is this four track long framework you see here. The table's modular control tower features a lower floor that's empty except for the staircase. The upper floor features a machine to control the turn table, a wall clock, and a old-fashioned rotary telephone. The table easily glides on an raised outer ring of tiles, and turns on a central 2 x 2 pivot point. This whole thing can be mechanized, much more easily than a transfer table, but it still needs fine tuning to make it work right. The outer ring of tracks is only attached to the base plates at two certain points: every other spot is held on by gravity. (plates on tiles) This is basically a very much enlarged version of this model here. I was working on a seven-stall shed in the same style as the tower to connect to the turntable, but the angles and hinge bricks weren't working out due in LDD. I guess it will have to wait until the turn table is built in real life.... if it is ever built in the real world. Comments, questions, suggestions, and complaints are always welcome, as usual and thanks for stopping by! -
Bureau of Unexplained Phenomenon's 2-6-0+0-6-2 Garratt steam loco with 1920's passenger train
Murdoch17 posted a topic in LEGO Train Tech
The Bureau of Unexplained Phenomenon's train does not officially exist and you never saw it. All photograph's taken of this train are mangled by some unknown force while still in the camera, and it never seems to stay still for long enough to get a glimpse at the engine crew. The passenger cars are are only marked with the Bureau's logo on the sides for a clue to their ownership. The 2-6-0+0-6-2 Garratt steam locomotive pulls a four car train, consisting of what seems to be a baggage car, a sleeper, diner, and observation car. All four cars (and the engine) are marked in a dark blue with light gray accents and the Bureau of Unexplained Phenomenon's logo on the sides (not shown). According to the scattered reports of varying age, the train's scientist crew catalogs the odd happenings around the USA since the Bureau's founding by Abraham Lincoln in 1863, such as un-dead uprisings in the 1970's, ex-confederate vampires in 1875, time travelers from the 1980's in the 1880's, attacks by mutant giant ants in the late-1940's, and an entire town being held hostage by a giant blob from outer space in the early 1960's, just to name a few of the more prolific cases that we know of. Other reports suggest the train is not merely cataloging the happenings, but tracking them via a rip in space-time continuum in the Pacific Northwest that is waiting to be opened to it's full inter-dimensional potential. This man on the far left is supposedly one of the senior operatives of the mysterious Bureau, a Mister Graves. Mr. Graves has more recently (as of 1926) been keeping tabs on Lord Sam Sinister (far right) Senor Palomar (second from left) and Alexis Sinister's (second from right) plans for the inter-dimensional portal that is located in the pacific northwest of the USA. Mr. Graves has ingratiated himself into the evil trio's inner circle but is keeping deep cover on his plans for the portal. Rumors suggest the three are looking for the portal to release a being of immense power into our world, a event that Mr. Graves is no doubt trying to secretly prevent at all costs. This steam locomotive was originally designed by Anthony Sava but with fake pistons and with small-size friction bearing wheels. I added working pistons and Big Ben Bricks medium flanged and blind driver wheels as see here at Ben's website. In my model, gear wheels are used as stand in for the custom wheels that are not in LDD. Even with the added pistons, the engine easily can go around corners and switches. The rear of the loco. The baggage car is supposed to contain all kinds of mobile equipment for tracking strange type of hyper-matter and ecto-plasmic energy fields, among other things. (In reality, all these cars are empty) The dining car and sleeper. This is where the on board crew sleeps in one car and eats in the other. This car is called the war room. In reality, it's a remodeled business car, turned into a room full of charts and chairs and devices for listening for Sasquatches and detecting dragon smoke. It also messes with enemy listening devices and destroys track-side cameras of passers-by. Can't be too careful with the future of the world on the line! NOTES: In reality, I just wanted to build a small passenger train out of dark blue pieces to match the engine I posted a couple months ago to Flickr. I thought at first about making it for the president of the railway line, but a fictional secret government agency from the 1920's works just as well. Comments, questions, and complaints are always welcome. This train could possibly be built in 2019, but I'll have to see. -
I was inspired by a failed Ideas project railroad round house and shed from this builder to make this Wild West armstrong turn table in LDD. I'm thinking of doing this model instead of the the two track shed, as it is a bit smaller than the twice-as-tall shed. As this a mechanical table powered by brute force and not steam, electric, or pneumatic means, the table has four angled "iron" bars for mini-figures to grip to pretend-turn the table manually. (This type of table is called an armstrong turn table.) The two sets of tiles on the middle of the table should have this GREAT and this WEST prints from the Toy Story 3 line. NOTE: The flex tracks are supposed to be taken apart into two halves for them to fit on the table ends. You should only need one flex track instead of two as shown, as one whole equals two half units. The 3 and 1/2 track long table has eight tracks radiating outwards on it, with the possibility of more or less tracks if needed being an option in the future. If this was built in real life, the four main locomotives will enter on the bottom-most track and proceed to be rotated to the correct stub-end track for storage. However, the BTTF Time Train cannot fit on the rotating table, (it's just a bit too long) so it will sit on the straight-through track and just run across the table to get off at the other side. (All the items but the blue steam engine and table itself have been bought and built in real life.) As usual, comments, questions, suggestions, and complaints are always welcome!
-
First off, I would like to say that, no, I am not terrible at maths! All shall be explained! (Sorry, this may be quite a lot of reading!) The Back Story: First aspect: Some weeks ago, I was having a general look for sets that might be of interest to me. I stumbled upon a very good deal on the Lego City Bus Station (Set no. 60154). I decided in a spur of the moment purchase to pick up 2 sets, with no real plan… That’s what sowed the seed! Second aspect: In the not so distant past, I had purchased a huge Lego haul from eBay containing many train set items and accessories. In amongst this, was an incomplete copy of the Lego Freight Rail Runner (Set no. 4564) – (maybe 80% complete) – at the time I didn’t really know what to do with it. Over time I harvested the 9V motor, wheels, couplings, bogie plates, wagon parts and straight track – basically all the good stuff! Now, I’m a big fan of seeing people doing set combining! I have never seen anyone attempt something like this! (Correct me if I’m wrong!) The Hypothesis: “Is it feasible to make a decent looking locomotive of any kind, combining Sets 60154 and 4564? – Using minimal significant other parts, but in cases where necessary only using parts I currently have, and not resorting to ordering things. The locomotive should ideally use Power Functions with 2 motors, lights are not necessary. Also, the finished model should be sturdy, strong, and able to be played with by children.” Answer, Was It Possible? Yes, and in my opinion, it turned out rather well. What I attempted to build was a massively simplified Class 37, with much artistic licence! Here is the finished product: Thus, the idea for “60154 + 4564 = 37?” was born! What do you think? Any questions, thoughts, or criticism will be much appreciated. Regards, James :)
-
Shay geared steam locomotive and silver ore mining train - MOD of a MOC
Murdoch17 posted a topic in LEGO Train Tech
This type of geared type loco is called a "Shay" (specifically a type "A", which means two pistons and two trucks) and were named after their original inventor of the type, Ephraim Shay. These loco's could only go about 20 miles per hour (or about 32 Kilometers per hour, if that's your thing) at top speed, and were very steady on rough track, hauling logging and mining trains up grades that would easily stall conventional steamer types. You can read more about Shay geared steam locomotive's at Wikipedia. Please NOTE: The design of the original Shay I redid into my version was by Stephan Pakbaz over on Flickr, as seen below. (His LDD file allowed me to build my version) as seen here. The 1 x 1 tiles on either side of the coal bunker are supposed to be printed with the number "4" The Shay type only has pistons on one side, with the other side being kinda sparsely decorated. Usually, their would be various accessories and such on this side, but i liked it better devoid of any clutter. The Shay geared steam loco bends in a odd way... but at least it works. NOTE: The angle shown is quite a bit more severe curve than the loco will ever have to handle.... but it looks pretty cool! This raw ore car was modeled after a custom Brick Link item by @wildchicken13 except mine is narrower and uses two wheels for a Wild West flair. You can see the original item that inspired me here. The caboose follows my standard pattern for my Western trains, with only a few color swaps and a missing cupola on top to set it apart from the others. Here we see the mining train consisting of four silver ore cars and a caboose, without the Shay. This is my latest (and most likely last) Western styled train, and it will join my other four steamers and their trains in my Wild West collection sometime later in 2018. (The reason I say "last" is that I've run out of railroad-related ideas for my Wild Western layout and am planning on focusing on the updated Native American camp, revised Fort Legoredo and the remaining frontier town buildings after this.) As you may have suspected, the ore the mining train holds comes from my well-protected silver mine, which can be seen in it's own topic. ...and as usual, comments, questions, complaints and suggestions are always welcome! -
Hogwarts Express with Hogsmeade station (real world MOC and a LDD WIP)
Murdoch17 posted a topic in LEGO Train Tech
Since the 2018 Hogwarts Express (set 75955) is lacking in realism, (with the engine and tender in particular!) I decided to revise my custom version with ideas from the set, including printed 1x4 curve tiles with Hogwarts Castle printed on them. The locomotive is a heavily modified version of LDDModelmaker's Black 5 model with some parts from set 79111, Constitution Train Chase. The tender features a three wheeled bogie design modified from the one in Anthony Sava's ALCO MRS-1. The middle axle moves side to side, as to allow going through switches and curves without issue. The inside of the cab features two gauges and the firebox. In this false-color image, the red parts slide, the blue ones stay put to allow for the loco to go around curves and switches. (BTW: There are parts underneath that keep the sliding bogie from falling out.) The roof and side wall of each coach come off independently from each other, to reveal four seats for students and / or the occasional teacher. The Hogwarts Express is usually made up of four corridor BR MK I passenger coaches, although sometimes a special fifth coach is attached with an open floor plan. (however, in this Lego design, they are all open floor plan!) Also, the end car is not accurate to the films, but is what I prefer to the alternative: a gangway leading nowhere with no red light on the end. In-universe / Film History for the Hogwarts Express: Leaving from Kings Cross' Platform 9 & 3/4 to Hogsmeade Station at exactly 9 AM, the Hogwarts Express carries students (and sometimes faculty) to and from Hogwarts' School of Witchcraft & Wizardry in the Harry Potter series of books and movies. It has been seen in every Harry Potter film, from it's first appearance in the beginning of Philosophers Stone to it's (so far) last at the end of Deathly Hallows. (part two) The Hogwarts Express is usually only in the film for a short while, and it is generally a pleasant journey from Kings Cross to Hogsmeade, although Harry Potter, Ron Weasley and a certain Flying Ford Anglia might beg to differ! This 100% fictional version of Hogsmeade station (as in, not really based on any of the Harry Potter films) was inspired by several sets, mainly set 21324 (123 Sesame Street) and bits of my older Hogsmeade station MOCs from years past. The model is modular, and features a detachable track-side platform, ground floor, second floor, and roof. The platform is five tracks long, and starts three studs away from the rail head, making it a breeze for larger engines with wider pistons to pass through unrestricted. The street side features the same basic look as the other side, but in this case their is a staircase.... which could cause a problem for luggage trolleys as their is no ramp! As also used on the rail side, this Hogsmeade 1 x 4 tile should be placed on the four exposed studs on the second floor. The upper floor features the station master's office with an little break room for an off-duty engine crewman to sleep in. Also up here is a fireplace and two desks, one of which has an oil lamp on it. The lower floor features a bench for passengers out of the Scottish fog and rain. Also, the two ticket booth's share a single cash register, so the two ticket agents best be extra sure how much money goes where and who did what! Every floor & platform is grouped separately in LDD, as shown here. As usual, comments, questions, suggestions, and complaints are always welcome! EDIT 10/27/2020: Hogsmeade station LDD model replaced, screenshots and words updated accordingly. Real life pictures coming eventually. (Hopefully soon!) -
Wild Western "wooden" railroad steam locomotive storage shed (two tracks)
Murdoch17 posted a topic in LEGO Train Tech
This railway shed was inspired by Shaun Baseby (or @lightningtiger here on Eurobricks) and his smaller farm shed from 2014. He designed the basic Technic frame on this shed, and I ran with it to create this wooden western-style steam locomotive shed. This shed is 4 1/4 tracks long with a total of 68 studs from back wall to entrance to the building, along with a 10 stud wide entrance for stream locomotives. The shed features a cow skull on the front above the entrance, just to give it that wild west flair. The rear wall of the shed. The roof of the shed is not removable, but it can fold open a bit on clips. With this view you can see how the Technic frame supports the roof. Here is the scene with the three steam locos stationed at the Fort Legoredo area depot The shed will normally hold my 4-6-0 and 4-4-0 steam locomotives, with the smaller 4-2-4 sitting on a third track outside the shed as shown. That's the BTTF time train on the fourth track, in the way back. Comments, Suggestions and Complaints are always welcome! -
Hi all First time poster, long time LEGO-lover! Hope you all are good :-) I recently did a major clean-up in my storage-room and found a bunch of my old LEGO's. Bliss!! Among all the wonderful bricks I found my old 4563 Train set. I set it all up... and it didn't work. Then it suddenly did. And then it didn't. When it WAS working, it seemed only to go when the control (4548) was set to full speed. And the speed was very inconsistent - slowing down/speeding up very sporadically. Maybe corners was especially slow (?). the other locomotive I have (4551) didn't go at all. I tried different lengths of track, but then remembered that the train could usually get going even though the ends were not connected. So here's the question(s): 1: Does anyone know of this problem and how to fix it? 2: Would it be easier to upgrade the "engine" to some of the new RC-stuff? 2.1: Are there any good guides out there for that? Any comments, help and suggestions will be highly appreciated! Revolver_Aage
-
I recently rebuilt my GP-9 to resolve some aspects of it that I was unhappy about. Here's the final result: New Haven GP-9 Rebuild by Matt Csenge, on Flickr Primarily, I rebuilt it so that the section around the battery box and IR receiver is truly 5-studs wide. After that, I added the fuel ports to the sides of the fuel tank. Then, being inspired by Aaron Burnett's amazing Central of Georgia GP-9, I modified the ends using less-than-half-stud offsets to get rid of the stepped slope typically seen when using cheese slopes. I also added lights using Brickstuff's new Power Functions Power Source v2, which includes directional lights. Unfortunately when I moved back to NY I misplaced my controller, so I haven't tested it yet... Stickers from OK Brick Works and Jim Pirzyk. New Haven GP-9 Rebuild by Matt Csenge, on Flickr New Haven GP-9 Rebuild by Matt Csenge, on Flickr And here's the pre-rebuild version: NYNH&H GP-9 by Matt Csenge, on Flickr
-
My first Lego locomotive MOC. Modeled after a BNSF ES44AC locomotive. 6 studs wide, 50 studs long and powered by two Lego Power Functions train motors. The three axle bogies have enough articulation to negotiate the standard Legos curves. It's made up of about 1200 bricks, took about 50 hours to design in Lego Digital Designer, 8 hours to assemble and cost a little over $200 to build, complete with electronics, from parts purchased off Bricklink. I've included the .lxf file below and welcome anyone to build, copy, modify or just examine my building techniques. I took great care to create many different groups to make the digital version easy to disassemble an examine. I've also included a link to a YouTube video of it running. It negotiates the standard Lego curves with no problems. I hope you like! Here's the .lxf file... https://bricksafe.com/pages/sed6/bnsf-es44ac-locomotive Thanks for looking!
-
Train MOCs and Builders - Who/What is Your Inspiration?
Digger of Bricks posted a topic in LEGO Train Tech
Who are some of your favorite train/locomotive AFOL builders, and what are your favorite creations of theirs? Anything and everything relating to trains amongst fan creations and builders can be discussed here, including Locomotives, Railcars, Trolleys, Monorails, Train-centric Architecture, LEGO Ideas Projects, Techniques and whatever else that may fit within the context of this subforum! -
Red five-car electric passenger train set (60051 / 7745 MOD)
Murdoch17 posted a topic in LEGO Train Tech
This electric high speed passenger train was inspired by both 7745 (High-Speed City Express Passenger Train Set) from 1985 and 60051 (High-Speed Passenger train) from 2014. The train features two locomotives (with no motors in either), one club car and four coaches. The roof of each car comes off to get at the inside, and all but the locomotives have interior details such as tables and chairs. (The cab cars are supposed to have generators and mechanical details, but I couldn't make it look good so they were removed.) The cabs on the two locomotives have computer screens for the drivers, but the rest of the open space is empty. You can add in PF / or 9v motors to either (or both!) of the locos, but I did not due to my personal preference of hand pushing things around. This car is one of four identical ones that all have removable roof sections. The club car's top roof section is removable to get at the upper floor, but the lower section is not accessible at all. (I did try unsuccessfully to make it work. The LDD file for this model is at brick safe. Please note, the red of the train can be completely replaced by blue, if you wanted to give it some variety. Comments, questions and suggestions are always welcome! -
These are the first pictures of the latest contribution to my train collection: a Swiss IC Train with an Re 460 locomotive (partially based on an idea by @Stefaneris). In addition to the locomotive, the train consists of five 1st class coaches whereof one is a panorama coach. The train has a total lenghth of 2.3 m and is equipped with four 9V engines. Quite fascinating to watch this unit climb all the way up to the Swiss mountains and all the way back to Knivsta Station - in two minutes! Goose bumps - and a touch of homesickness ...
-
Hello! Here is my first try on a locomotive and also the first one I completed. Some details like the bell are still missing but overall its pretty much complete. As for the moment I built this i had only a XL-Motor available to power it, so I implemented it into the drivers compartment. The headlamp at the front does light up with the Power-functions-LED. Was a bit tricky to hide the big transparent LED thingy in the headlamp design. Overall I am happy how it turned out, and I hope you will enjoy it aswell! When I got some time I will take some more pictures! Suggestions and critisism are welcome! Lego 4-4-0 Western Locomotive by Ragni Norgrimson, auf Flickr
-
I'm working on a locomotive, an ES44. In LDD it's 50 studs long, but the scale is just a little off. I need to lengthen it to 58 studs to get the large fuel tank between the three axle bogies to scale properly. Is 58 studs too long?
-
4-8-2 streamlined steam locomotive with Ohio Pacific passenger train
Murdoch17 posted a topic in LEGO Train Tech
Please NOTE: There never was a Ohio Pacific railroad in the real world, but in my fictional universe, it never made it to the California coast, just to Denver, Colorado at it's western-most terminal with New York City being it's eastern-most point. As such, this locomotive is entirely fictional, with the paint scheme for the coaches inspired the real-world Missouri Pacific. This model was inspired by user @brickblues and his 4-6-2 Mallard-styled steam locomotive. My version of the engine is a 4-8-2, which means it has four leading, eight driving, and two trailing wheels, making it a Mountain type locomotive. The engine is streamlined with a blue shell around the boiler with tan and white stripes in places. The tender is supposed to say "Ohio Pacific" in printed 1 x 1 tiles, while the cab is supposed to say 6093 (also in printed tiles). The cab of the loco should features this print for the firebox door that is lacking in the LDD file. The baggage car features opening double doors for the baggage end and single doors for the passenger end. The three coach cars are identical with two opening doors at either end. The observation car features a open-air rear platform for looking at the passing scenery. This train is on the to-build list (which is getting longer all the time!) in real bricks. As usual, comments, questions, complaints, and suggestions are always welcome! -
From 1919 to 1962, the Chicago, Milwaukee, St. Paul and Pacific Railroad (known as the Milwaukee Road) had these five General Electric-made behemoths pulling trains under the wires from Chicago to Seattle. They were called the Bipolar's for each of the locomotive's 12 motors had only two field poles, mounted directly to the locomotive frame beside the axle. The motor armature was mounted directly on the axle, providing an entirely gear-less design. These locos were so powerful they could out-pull modern steam locos, and what used to take two steamers took just one bipolar. However, after a disastrous 1953 rebuilding by the railroad's company shops (who had no clue how to work on a electric loco) the engines were prone to failures and even fire. And so, in 1962, four of them were scrapped with the lone survivor, numbered E-2, towed to the Museum of Transportation in St. Louis Missouri, where it has sat silent even since, as seen above. The slightly stylized LEGO version of the locomotive was inspired by a 1999 version of the Bipolar electric locomotive built by user legosteveb and by a digital-only design by @Sunder. With this updated, more curvy model, the classic orange and red scheme was impossible, and so as the yellow and red of the previous model type. Thus I was forced to invert the red and yellow to the fictional scheme seen. (The black number boards in front and rear should say "E2" in printed 1 x 1 tiles.0 The loco frame is split in three sections as per the original engine. The front and rear section can pivot slightly to make the engine go around curves. Since the last uploading of this model, the wheels have been re-arranged into two groups of seven (they are joined near the end of the frame, with the exact middle section floating freely between the two ends) and the body of the engine has been extended for a total magnet-to-magnet length of 70 studs. The model should perform well on R40 curves / switches, as this picture attests to it's flexibility.... though until it's built in real life, it will remain untested. The newer model is only 1 plate higher than the previous version, with the same length and width. As you can see, it's my longest single locomotive yet designed with 14 axles total. (I'm not 100% sure my articulation attempts in all the boogies and the frame were enough to work on standard LEGO track, but I guess I'll just have to see when it's built in real bricks latter this year!) The passenger train, and the rear car in particular, were inspired by the Milwaukee Road's Olympian Hiawatha service from Tacoma, Washington to with the rearmost car being a Beaver Tail observation car, which were out of service by 1961. (you can read more about these odd-looking cars here on this Wikipedia page.) Actually, I'm not sure the Beaver-tails were ever used all the way to the West Coast on the Olympian, but since it's LEGO, who really cares! That's all I have done for now, and as usual, questions, complaints, comments and suggestions are always welcome! (real life pictures coming to this topic as soon as possible, but the LDD file for the whole train is available here at Bricksafe)
-
Hi all, this time I'd like to show you something that is a bit different. It is more a study, or an experiment than a real model. It's is a very small narrow gauge locomotive, inspired by an hand-made creation of Mr. Akio Inoue (who is a famous live steam builder in Japan). The locomotive is depicted on Mr. Mori Iroshi site, which is of great inspiration to me. There's also a Youtube channel (simply search AKUBI LR on Google, you''l find it immediately). Let's say it is a mix between a DEKI-3 and a Rhatische-Bahn GE 2/2 162. Once it was yellow, now it has RhB colors. It's a bit "Japanese" since it has a super-deformed body, it is more tall than long. "Power" (HA HA HA ) is coming from a 9v micromotor mounted upside-down, and there's a working headlight. It needs a battery car to work. I use it on black narrow-gauge Lego curved track, but I recently discovered that LEMAX track has the same gauge and offers straight tracks (no switches, sorry ). It is sloooooooooooooooooooow! I hope you like this little,nerdish thing! It's name is PKZIP (like the file compression archiver for DOS PCs of the past)
-
4-4-2 "Atlantic" steam locomotive with Great West passenger train
Murdoch17 posted a topic in LEGO Train Tech
I don't see many 4-4-2 Atlantic types steam locos around in LEGO, and even less orange-colored trains besides the TGV-like Horizon Express and SP Daylight 4449. This should fix both problems at the same time, and yes, it's build-able in this color in real life. The Atlantic type 4-4-2 (4 leading, 4 driving, 2 trailing) was the top-of-the-line express train hauler in the middle 1890's to early 1910's. Some continued right up until the end of steam in the Fifties, with the Hiawatha's of the Milwaukee Road hitting 100 MPH speeds daily with this wheel arrangement. The engine should have "3110" printed on it's cab and "GREAT WEST" on it's tender in 1 x 1 tiles. The cab of the loco with four printed gauges and the firebox door. Four identical passenger cars in matching orange paint-scheme are pulled by the Atlantic-type steam locomotive. The words GREAT and WEST are supposed to be printed on the 2 x 4 tiles on either side of the cars. Here you can see the whole train at once. I'm not sure when or if this loco and it's consist will be built, but if it is I will update this post here with better, real-world photos. LDD file available at this link here. As usual, Comments, Suggestions, Questions, & Complaints are always welcome! -
Hi all, since I like a lot old tin trains (Marx, Hornby) and in particular the clockwork ones, I always wanted to try to create my own clockwork toy train. The first idea was to use the yellow old clockwork motor from the Basic sets of the 80s. Unfortunately, its wheels were designed to accept tires, so double side border and no capability to go through rail switches. From this forum ("Moc Clockwork Steam Locomotive" from RSB04 user) I understood the possibility to change the standard wheels with train wheels and so I did, adding two rubber bands. I can say it works fine, with all its limitations. I ended up creating a "reloaded" 115 set with parts of the 70s I had around. All cars are very light, and I greased the axles with tamiya Mini4WD grease in order to eliminate noises and to reduce drag. On a circle track, it makes 1 and 3/4 turns. On straight track, it travels more or less 4 meters. It is a toy train, no more no less, but I wanted something more modern.
-
4-10-4 type steam locomotive "Red Demon" + Pan-American Limited - real world train MOC
Murdoch17 posted a topic in LEGO Train Tech
The 4-10-4 (four leading, ten driving, four trailing) "Rainhill" wheel arrangement was so named after the Rainhill Trials of October 1829 in Rainhill, England of which the famous Rocket was the only entrant to complete the Trials. The Rainhill type was designed in 1927 and built in early 1928, though it was originally called the "Gigantic" type, but the planned Centenary of Steam celebration sealed the deal on the naming of the type. (Unfortunately, the plans for the potential celebration were postponed in July 1928 and finally cancelled one day before the Stock Market Crash of 1929.) The steam locomotive prototype of the 4-10-4 Rainhill type was painted a dark red and gray color-scheme with a light gay box on the tender and was sold by Baldwin Locomotive Works in 1928 to Brick Railway Systems, but due to technical teething troubles and because of it's unusual color scheme was nicknamed the Red Demon. The engine worked the trans-continental route on the "pan-American Limited" passenger train from New York to Los Angeles, with the Red Devil or one of it's type worked the portion west from St. Louis to Las Vegas. The Red Demon original engine (number 7957) worked this route from 1930 until being bumped to freight duties in early 1958. The engine then worked freights with it's thirty-nine brother's in diminishing numbers until this one was sidelined in 1971, the last of it's kind. The Red Demon was pulled out of the mothballs in 1973 for potential use on the 1976 American Bicentennial train but politics intervened and Texas and Pacific 2-10-4 number 610 got the job instead. After that, the engine's future looked bleak until the "Save the Red Demon 7957" Committee was formed which raised enough money to restore the engine to working order by 1978 and has kept the engine indoors and in tip-top shape ever since under the Red Demon Incorporated moniker. This company uses five former Brick Railway Systems-styled coaches on fan trips, but they are wholly owned by Red Demon Inc. The tender features the name of the railroad (Brick Railway Systems) on it's side, with a light at the rear and a ladder to the top deck. In reality, there was no 4-10-4 type of steam locomotive. It was strangely skipped over in the age of steam... none of this wheel arrangement were ever built. The name Red Demon was chosen because the 4-14-4 type of Soviet Russia was the closest analogy to my loco... except mine works fine, while the Russian one never did much as it spread the track, ruined switches and pulled the freight cars' couplings apart due to it's raw power. The second reason for the name is the Red Devil, a heavily modified South African 4-8-4 engine with a gas producing combustion system and many modern improvements. That cape gauge engine worked beautifully, but was mothballed in 2003. As of 2018, however, the Red Devil is again puling fan trip trains in South Africa! The three regular coaches, all in the same color scheme as the engine. The Pan-American Limited's observation car. The whole train. Comments, Questions, Complaints, and Suggestions for the future are always welcome! EDIT: 12/8/22: There really is a prototype for everything! I designed a 4-10-4 steam locomotive in 2019, thinking it was a complete work of fiction, as no class had been built to that wheel arrangement. Turns out, I was partially wrong - no class had been built, but one had been designed by Baldwin Locomotive Works, as seen in their online archives! It was a three-cylinder beast drawn up for a road called The Monon (otherwise known as the Chicago, Indianapolis, and Louisville Railroad) back in 1928 - not very far off my fictionalized backstory year of 1927 as written by me in 2019.... spooky, right? -
2-6-0+0-6-2 (Double Mogul) Garratt-type steam locomotive - real world MOC
Murdoch17 posted a topic in LEGO Train Tech
This steam locomotive is a 2-6-0+0-6-2 Double Mogul (Garratt-type) steam engine. This type of wheel configuration was built for use on railways in South America, Australia, Africa, and England in at least six different track gauges, according to Wikipedia. None were built for use in North America like my model is supposed to be, but I'm ignoring that fact. The engine I have made traces it's lineage to a model originally designed by Anthony Sava as a 4-6-0+0-6-4 but with fake pistons and with small-size friction bearing wheels. I added Big Ben Bricks medium flanged and blind driving wheels for use with the working pistons. The very inspirational original Sava engine is available for purchase in PDF instructions format at Mr. Sava's official Bricklink store here. Even with the added pistons, the engine easily can go around corners and switches quite easily. I did have to add two weight bricks for the pistons to grip the rails sufficiently to move instead of scrapping along the track like they were before. The engine also features a nicely decorated cab with plenty of printed tiles. (The letters BRS are the initials of my fictional railroad: Brick Railway Systems.) I got this picture from Google as an example of how close my LEGO Garratt engine is to the real deal. (I couldn't find a "real" picture of this specific type, but I know it exists according to Wikipedia. So this O gauge model of it will have to do...) As usual, I have a color-matched train in the works that this engine is to pull. To see the Maintenance of Way crane train's topic click this link. Please let me know if you have any comments, questions, suggestions or complaints. Thanks for looking at my model! EDIT 10/16/17: I edited the engine by extending the boiler four studs. The pictures have also been updated as well. -
I'm trying to drag a very good builder of trains to EB and everything related to railway construction, pavlo, which lives in the Russian Lego forum. I obtained permission from him, I will now publish his works here. They are valuable in that they cover a diverse railroad park of the USSR / Russia, the work is done in the same style and at different scales (in 6, 8 and 10 widths), have an LDD file, and those who wish can collect these, modelism in the part of railway. Let me know if you are interested. Thanks in advance. First of all, a picture with several of his works. Gradually I will replenish this topic with new models from pavlo
-
I was thinking of building a locomotive with a boiler that is 3 studs in diameter. Part #30360 fits the bill nicely, but I cannot think of a part that will fill the middle gap. Do you have any ideas on how to do that, or is there another part that is 3 studs in diameter that does the same job better? Fig. 1 Part 30360 was produced by The Lego Group between 1999 and 2012.
