Search the Community
Showing results for tags 'toy'.
Found 16 results
[MOC] Kenner Mini-rigs
MaximillianRebo posted a topic in LEGO Star WarsInspired by other builders on Eurobricks, I've created my own set of Kenner Mini-rigs. These were non-canon toys from the 1980s that were designed to fit into the Star Wars universe but never appeared on screen (although a few have made their way into various media since then). INT-4 Interceptor A figure can fit inside through a hatch in the roof and the wings do fold out. The INT-4 was a repulsorlift scouting vehcile used by the Empire. The short range flyer is operated by a single pilot and can be carried inside the body of an AT-AT. CAP-2 Captivator This was my first attempt at 'upside down' building. Bossk (or any other fig) can fit fully inside the cockpit, I just have it open to avoid reflections in the photo. The CAP-2 is a model of walker used by the Empire and bounty hunters. Two mechanical arms extend from the front of the vehicle with a blaster cannon mounted between them and a large mechanism on the back hold prisoners for transport. MLC-3 Mobile Laser Cannon I managed to fit wheels underneath the build to allow for easy movement and the cannons have a limited range of motion. The MLC-3 light thank is a type of self-propelled artillery mounted on a motorized, tracked chassis, used by the Rebels on Hoth. Desert Sail Skiff A small, open-air, repulsorlift utility vehicle. The sail skiffs are smaller in size than the regular skiffs seen in ROTJ and were designed to be used as one-man personal fliers. Endor Forest Ranger This build is based on a design by @jamie75, I made a recolour of his cockpit design and changed the wing design. The wings are capable of rotating through a full 360 degrees and the landing gear folds up. Unfortunately I don't have an Endor trooper to use to show scale, so here's Jedi Luke. This is a repulsorlift vehicle used by the Rebels on Endor. With its unique gravity-controlled cockpit capable of supporting a single pilot, the vehicle was designed for manoeuvring through the forests of Endor. The vehicle had two gyroscopic wings and a large blaster cannon on each side MTV-7 Mobile Terrain Vehicle This model is largely a rebuild of an existing MOC by @jere7my with minor adjustments. I really like how he used the technic rubber axle connectors to allow for the wheels to pivot from the body. The MTV-7 is a single tracked, double wheeled ground car used by the Empire to scout planetary terrain, in particular on Hoth. Family photo And finally a bonus round... Imperial Sniper This wasn't produced as part of the Mini-Rig line, but rather from Kenner's line of Body-rigs - similar non-canon toys on a built on a smaller scale to the mini-rigs. The Imperial Sniper is a repulsorlift craft piloted by one person. It features a large open seat, two blaster cannons, and a grappling claw.
[MOC] Cute and Compact F1 Car
zumaidi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingCute and Compact F1 Car - Pull back engine - 179 parts - 16cm X 10cm X 8cm - 174 gram I share it here - https://www.buymeacoffee.com/zumaidi/cute-compact-f1-car Thanks for your support.
[MOC] 1:22,5 Scale - G Gauge (45mm) - Toy Locomotive (Mark II) and new LGB-based "gondola" wagons
Paperinik77pk posted a topic in LEGO Train TechHi all! Here we go again with big Lego trains running on 45mm G Gauge track! Some of you may remember the yellow Toy Train locomotive I prepared back in 2019 -it was one of my first experiments with G-Gauge trains. This little locomotive was based on a small Powered-Up battery box and a Medium motor. Here it is during a night run on the new 45mm copper track with wooden sleepers I restored to be used on my small garden railway. Here's a detail of the old chassis with the original 1,667:1 gear ratio. This solution proved to work fine on a flat track at home, but was completely useless on the garden line, which can be easily considered a "mountain railway". A 3:1 gear ratio worked better, but gears were too stressed and speed was ridicolous. Plus, with some wagons, the motor always needed to work at full speed. Therefore, back to the lab, I completely revisited the heart of the locomotive, and updating some details on the exterior. Here it is, the Mark II (TADAAAAAAA) !!! And...what's new??? Actually, at body level, it did not change so much from the older one . Handle bars, and headlights have been modified and a new exhaust scoop has been added over the hood (there's no more a red On/Off button). The real new part is under the bodywork: A completely new chassis has been introduced, and now features a new 4-ports PuP Hub and a more efficient Large Motor. Gear ratio is now 2.779:1. It is very strong and smooth - the big battery/bluetooth hub helps traction (which can be increased with the use of rubber bands around the wheels), and the L-Motor is a great improvement over the M-Motor. I've prepared some workflows on the PuP application to work at 25/50/75/100% of the power. The chassis can be detached from the body with four "fast unlock" pins, so changing the batteries is now an easy task. Then, with a locomotive now up to the task of garden railroading, I needed some rolling stock. I've some LGB wagon bases with studs on top (item number 94063) which are the perfect chassis for some wagons I've designed in Stud.io. Both axles are steering, to help the wagon working on tighter curves. So here it is the small gondola , in a bright blue color: And the tan/beige gondola with taller sides: The LGB chassis runs smoothly and really helps the whole train to roll better. Sometimes these things are available (used or new) with an acceptable price, so I get them. A final photo of the consist (fat least for the moment)! Next to come, a passenger and a closed freight wagon with sliding doors (let's see who comes first). I'll try it on the garden railway soon and give some feedbacks (for now only some pretty satisfactory tests were conducted on homemade ramps) I hope you like it!!! Ciao! Davide
[MOC] Simple Technic Tank (Free Building Instructions)
makushima posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingLego Technic MOC - Simple Tank (Free Building Instructions) Free Building Instructions: https://rebrickable.com/mocs/MOC-59700/makushima/simple-tank/#details Lego Technic MOC - Simple Tank Lego Technic MOC - Simple Tank
[MOC] Star Wars Kinetic Balancing Desk Toy
Sandlot_Creations posted a topic in LEGO Star WarsThis is a Kinetic Balancing Desk Toy with interchangeable scenes! This scene is a X-Wing and a Tie Fighter in a dog fight over the Death-Star. LEGO Kinetic Balancing Desk Toy by Sandlot Creations, on Flickr LEGO Kinetic Balancing Desk Toy by Sandlot Creations, on Flickr you can watch it in action here : Let me know of any scene ideas you would like to see built! Finally, if you would like this as an official product please support on Lego Ideas! Here is the link : Kinetic Balancing Desk Toy Thank you for watching!
Bat Wolf of Lego Batman Movie
KMPMOCS posted a topic in LEGO LicensedBat Wolf, the chopper seen in the Lego Batman Movie, it first appeared when Robin managed to sneak into the Bat Cave, and appeared again around the 1 hr 05 min mark in the movie. Its image is also included in the LEGO® BATMAN MOVIE: The Making of the Movie book. Its not a very accurate build as my only reference was still images from the movie, so I went for simple, straight-forward building technics for this chopper :) Regards, KMP www.facebook.com/kmpmocs
Es rappelt im Karton
The Chosen One posted a topic in LEGO Action FiguresEs rappelt im Karton.
MOC - Lego Clockwork Locomotive
Paperinik77pk posted a topic in LEGO Train TechHi all, since I like a lot old tin trains (Marx, Hornby) and in particular the clockwork ones, I always wanted to try to create my own clockwork toy train. The first idea was to use the yellow old clockwork motor from the Basic sets of the 80s. Unfortunately, its wheels were designed to accept tires, so double side border and no capability to go through rail switches. From this forum ("Moc Clockwork Steam Locomotive" from RSB04 user) I understood the possibility to change the standard wheels with train wheels and so I did, adding two rubber bands. I can say it works fine, with all its limitations. I ended up creating a "reloaded" 115 set with parts of the 70s I had around. All cars are very light, and I greased the axles with tamiya Mini4WD grease in order to eliminate noises and to reduce drag. On a circle track, it makes 1 and 3/4 turns. On straight track, it travels more or less 4 meters. It is a toy train, no more no less, but I wanted something more modern.
[MOC] Freedom Gundam ZGMF-X10A
demon14082001 posted a topic in LEGO Sci-FiName : Freedom Gundam. Pilot : Kira Yamato. Series : Mobile Suit Gundam Seed / Seed Destiny. Material : LEGO. Code name : ZGMF-X10A. Height : 21 inch. Wing's length : 15 inch. References : _Freedom gundam : anime ver, Real Grade, Master Grade 2.0 , Metal Build. _Strike Freedom gundam : Perfect Grade, Metal Build. My 2 main models are Freedom Master Grade 2.0 and Strike Freedom Metal Build. Fulll Video Review - see how all the articulation work in real life : or see more in my album : Flickr : https://www.flickr.com/photos/134378223@N05/sets/72157667572346161 MocPages : http://www.moc-pages.../moc.php/431161 Build to fight support side by side with ZGMF-X09A Justice Gundam : How this Mobile Suit look like without action base : Front Back (Beam rifle can be attached behind) Holding weapon On action base The wing can open like this. The open-function is built by Technic style (Rotate gear on each side) Using Beam Saber *Full Burst Mode All weapons are used as once : _2 CIWS guns (mounted on Head unit). _Beam rifle (on right hand). _2 Plasma beam cannons (hidden behind Wings unit). _2 Rail cannons (transform from Side Skirts). *Remember to watch the Video Review above to see how all the articulation work !. . . . or my previous moc , Astray Gundam : http://www.eurobrick...opic=117605&hl= Thanks for visiting .
Eddie_Young posted a topic in Special LEGO ThemesThe all time classic toy of the 20th century and to me the coolest toy right after LEGO now finally in brick form! This is my project for LEGO Ideas. It uses a classic blocky body and cubic head design to make it simple and cute. It is, as you can see,decorated with a control panel on the chest, a face with two scary red eyes and a cool little window on it's back that lets you watch the mechanism at work. And it can really walk!!! Let me know which colour and which design (arms, antennas, etc.) you like more Thank you. If you like it, please support on LEGO Ideas.
[MOC] Modular Toy Shop!
Lego_Nerd98 posted a topic in LEGO TownHere is a MOC I finished recently: a Modular Toy Shop. I put it up for voting to become a Lego Set, but it isn't faring well. What do you guys think of it?
[MOC] LEGO Brick Separator Grass Trimmer
dr_spock posted a topic in LEGO Technic, Mindstorms, Model Team and Scale ModelingDo you have a young child who likes to help you cut the lawn? Do you have more brick separators than you know what to do with? Why not make child size toy weed whacker? LEGO Brick Separator Grass Trimmer by dr_spock_888, on Flickr Powered by one AAA battery box and XL motor. The brick separators are not sharp and will not cut a child's toes or fingers. Safety glasses should be worn. Created for Flickr's Separator Anxiety https://www.flickr.c...ps/2840637@N21/
Lego Freight Train idea & instructions
LegoGunInstructions posted a topic in LEGO Train TechA brand new custom lego Freight Train made in LDD. I can't seem to upload the screenshots here. Check out the screenshots on MOCpages: [link removed: self promotion]
Masters of the Universe
LegoJalex posted a topic in Special LEGO ThemesHere are some of the figures from Masters of the Universe. Myself I did not have any figures as a kid, but I remember that I often enjoyed looking in the toys catalogues and thought they looked really cool. My favourite during that time was Hordak. These brickbuilt figures I have tried to build as small as possible, but with details and as close to the original as possible.
Horse Racing Toy
skcheung posted a topic in Special LEGO ThemesIf you are old enough you may have owned this toy. I loved this as I was a little child but my mother did not buy me this (LEGO neither, of course). Since then, this toy ran out of my memory until last Saturday I discovered it in a toy museum. Now I have the money to buy this toy but nowhere I can buy... The only alternative, perhaps, is to build this. As expected, it brings lots of joy to my kids. Video:
MOC: TMNT - Turtle Party Wagon
LegoJalex posted a topic in LEGO LicensedI repost this since it was lost from the server move. So here is the Turtle Party Wagon from 1988 again. Unfortuantely no Turtles minifigs, yet (I have to wait till 2013 :)) Comparision with the real Turtle Party Wagon.