Search the Community
Showing results for tags 'robot'.
Found 315 results
-
Lego maracas rhythm machine
kostistlac posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
https://youtu.be/eQmk5bInK0c <iframe width="800" height="475" src="https://youtu.be/eQmk5bInK0c" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> -
Location: G10 Onix Tags: Vehicle, Land Vehicle Last time, in Ender's story: Season 1 Season 2 A Man and His Dog Hamilton The Puffin Fight Night! Roomba Robot The Scurrier I Spy... ...Something Green and Red Inspired Action Sudden Geyser Galaxy Transport The Bentley Wheel Well OoC: Judges, the tv studio is re-used, but there is another picture further down. Please scroll all the way to the bottom. The base the robot is on is also re-used. Next up, we have Sushi Chef! And let the fight begin! OoC: Wheel Well (the red robot) is also re-used.
-
Robot Santa Claus
Eddie_Young posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Please support my fully functional walking Wind-up Robot. I'm posting this to the Technic forum, because it is actually a LEGO Technic/Mindstorms creation. The Classic bricks are only on the outside. I built this for Christmas 2016. It gave out presents to all our friends and family. The product of two months work! The sleigh is driven by two NXT motors (controlled by EV3) and Rudolph's legs are powered by a PF M motor. Santa Claus has an incorporated pneumatic system using two pistons, a pump powered by a PF L motor and an EV3 motor which opens and closes the pneumatic valves. The video shows a case where Santa rejects a naughty kid and, in the end, doesn't give him the present. I hope you enjoy the video as much as I enjoyed building. Merry Christmas !!! -
Name : Justice Gundam. Pilot : Athrun Zala. Series : Mobile Suit Gundam Seed. Material : LEGO. Code name : ZGMF-X09A. Height : 21 inch. References : _Justice gundam : Real Grade _Freedom gundam : Master Grade 2.0. Full Video - see how all the gimmick and articulation work in real life , check this video : or see more in my album :Flickr : https://www.flickr.com/photos/134378223@N05/albums/72157674353592682MocPages : www.moc-pages.com/moc.php/435132 This mobile suit is build to fight support side by side with ZGMF-X10A Freedom Gundam : How the main unit of this set (Justice gundam) look like without action base : Beam saber from side skirt : Beam boomerang from shoulder armor : Fatum-00 : _The backpack unit, also is a mobile armor which can fight along with Justice automatically . I purposely build this unit to be a lego Technic set with 4 functions _2 "Beam cannons" can be turn up down : _Switch forward the level and rotate the upper gear to control the 2 "Turret machine guns" on both side of the Fatum. The machine gun has 2 part, 1 main gun on top and 2 support guns which is my addition and can move independently. _Switch back the level and rotate the upper gear to control 2 wings. I did this because i think it'd be more interesting to control both wings at once. _Rotate the other gear to extend the Fatum so there will be more space for the mobile suit can stand on it which you can see below. This is how the Fatum be attached on Justice's back : How it stands on the Fatum : This is the other way to attach the Fatum-00 : My other addiction is the mode which i call "Full thrust mode" . Using more 16 thruster to speed up : _4 on each legs. _1 on each side skirts. _2 on back skirt. _2 on each shoulder. *GUESS WHICH MOBILE SUIT'S ICONIC POSE STYLE ! *Bonus scene : *Remember to check the video above to see all the gimmic and articulation work ! or check my previous MOC : http://www.eurobricks.com/forum/index.php?/forums/topic/139168-moc-freedom-gundam-zgmf-x10a/
-
Hey there, My name is Corneel Clarys and at the moment I'm making a life-size Lego Bastion from the game Overwatch. Please chech it out and give me some tips if you'd like! https://m.facebook.com/CorneelClarys.lego/
-
So, some years ago a Russian toy company TEHNOLOG released a tabletop wargame "MechBat" (Mechanical Batallion). It featured two groups of four Mechs battling each other along with squads of tiny soldiers. At the time, I loved the game, especially because it was not restricted to any kind of gaming board so I could come up with all kinds of crazy landscapes, scenarios and special rules. Each of the four Mech figurines had detachable arms and back pieces that symbolized their weaponry and special systems. My two favorites were Barbarian, armed with missile launcher and power fist, and Predator, armed with minigun and a laser cannon. Thanks to my friend @Garry_rocks I was recently reminded of the existence of MechBat and our conversations inspired me to recreate my favorite mechs in LDD. Here is how the original minis looked like: I took the respective color schemes from the picture and applied them to my models: [Render] MechBat - Barbarian and Predator by Artemiy Karpinskiy, on Flickr Here are Barbarian and Predator separately: [Render] MechBat - Barbarian by Artemiy Karpinskiy, on Flickr LDD Screenshot [Render] MechBat - Predator by Artemiy Karpinskiy, on Flickr LDD Screenshot * * *Now folks remember, if you like what I do and you want to see me create your OC, a favorite Bionicle Character, or something else, feel free to look up my Commission Info! I also now have a Patreon page, so please consider supporting!
-
I've been meaning to post my old exoforce stuff here literally since the theme was still around in stores. This is my favorite Moc, Dark Sentinal. It borrows Alien avengers Giant laser cannons on its shoulders, and insanely heavy armor. Its literally covered in weapons. The design was inspired by this silly (but awesome) thing; http://www.deviantart.com/users/outgoing?http://vignette2.wikia.nocookie.net/exofarce/images/d/d5/Obliterating_overlord.png/revision/latest?cb=20100602212643 It's basically a practical superweapon for Mecha One. Rather than having a giant battle station with an obvious weakspot, he went for a Supernova-sized design with impenetrable armor and heavy weapons. All made possible from stealing golden city tech. Top view better shows off the awesome shape and style. I disliked that all the robot mechs were basically animals in the last year of exoforce, so I went with something powerful and high tech. My spray painted iron drone Mecha One sits in the cockpit. there are 3 printed control panels inside, its quite roomy I used a castle turret to create the shape of the torso. Did not have enough angled bricks otherwise... The back is also heavily armored, and almost entirely done with regular bricks. The gun's barrel can swing down to reveal a functioning blunt shooter. Thanks for looking! I'll be posting a lot more exoforce stuff soon.
-
Location: C10 Marden Tags: Vehicle, Land Vehicle Last time, in Ender's story: Season 1 Season 2 A Man and His Dog Hamilton The Puffin Fight Night! Roomba Robot OoC: Judges, the tv studio and the fighting baseplate are both re-used. ,,,It's the Scurrier! This is a robot to make all robot-kind proud. Top of the charts in every fight... ...and voted #1 robot you wouldn't want following you down a dark alley! The match has begun. Let us see who will win. The poor little guy never had a chance. Join us next time folks!
-
My new moc... Name : Justice gundam Code : ZGMF-X09A Series : Mobile suit Gundam Seed Pilot : Athrun Zala ***Check this link to see Finished version : http://www.eurobricks.com/forum/index.php?/forums/topic/144681-moc-justice-gundam-zgmf-x09a/ Full video : Built to fight side by side with Freedom gundam : Stand alone with Fatum-00 unit and the Fatum and be attached on its back or this style... but need support base I will finished this moc soon, hope you like it ! ***Check this link to see Finished version : http://www.eurobricks.com/forum/index.php?/forums/topic/144681-moc-justice-gundam-zgmf-x09a/ My previous moc : Thanks for visiting !
-
Location: G09 Greater Drigo Tags: Vehicle, Land Vehicle, Spaceship Last time, in Ender's story: Season 1 Season 2 A Man and His Dog Hamilton The Puffin Fight Night! OoC: Judges, the tv studio and the fighting baseplate are both re-used. As Ender flew through the Marden system he continued to watch the Mech Wrestling on holo-tv. Alright peeps! We are back on the air after moving to our identically designed TV studio on a new hover-cam suite! We know you all want to see the next event, so without further, unnecessary explanation from my colleague about that move, here's the next robot contestant. Hey! First up tonight is the Roomba Robot. And who's up to fight this fancy vacuum? To Be Continued...
-
Got inspired by Miracle of Sound's song "Man and Machine". * * * Now folks remember, if you like what I do and you want to see me create your OC, a favorite Bionicle Character, or something else, feel free to look up my Commission Info! I also now have a Patreon page, so please consider supporting!
-
This is a set I made for LEGO Ideas, but I figured I'd share it here as well. I'm still very new on Eurobricks and this is only the very first MOC that I've posted, so I'm open any tips anyone has to offer about how to format these sorts of posts in the future. The set is based on science fiction classic Forbidden Planet and includes minifigs of all the main characters from the film, including a block-built version of Robbie the Robot, plus the weird unnamed space-car thing that Robbie drove around. I also included a minifig-scale lego version of the film's poster. I tried to make everything as accurate to the film as it was possible to get at that scale, including custom decorations for the uniforms complete with accurate rank insignias. Here's some various angles of the car thing. Sadly, I wasn't able to make it so the front opens like in the film. Here's some of Robbie. Funnily enough, he actually has greater range of articulation than the original Robbie costume/prop did. And here's some closer looks at the poster I designed for it Let me know what you think. If you like it, please take the time to support it on Lego Ideas.
-
disclaimer: I do not have any licence for any Matt Groening original work. I only created LEGO Bender for fun and for free. Its LEGO interpretation and LEGO design is my own. info: Bender's Wiki ______________________________________ Hi, I am Bender, I bend girders, I can bend them into any angle. 45 degrees, 30 degrees, you name it... I also want to kill all humans, I smoke, I drink, I steal. This is how I look: As you can see I am not just some stupid bottom to top robot, I am a SNOT robot: And I can move, thanks to softaxles, magnets, pins, balls and sockets: My front door opens, so I can hide all I steal. Look at that nice pile of money I stole: I am getting sick of you humans, with your organs and soft skins. I will have a drink of my beer: Oh, somebody ripped my hand of. But it can be easily attached back: And if you do not like me, you can bite my shiny metal.....oh...you can't, it is plastic: ______________________________________ Video: Instructions (free) (PDF computer generated) will be on Rebrickable (link available when MOC approved on Rebrickable): preview: EDIT: Instructions available Rebrickable - BENDER
-
Here a model of Jester from Titanfall 2. Jester is a simulacrum, an AI robot imitation of a person, but doesn't realize or accept that. The model is about 1/10 scale, 7 inches or 18 cm tall. He's packing a couple of weapons that are actually throwbacks to the first Titanfall game, a white, black, and orange CAR SMG (Combat Advanced Round Submachine Gun) and a RE-45 large caliber handgun on his right thigh. Red grenades hang from the green tactical vest he wears. The Wampa/Taun-taun horn hanging from the back of his head is supposed to be a raccoon tail. I haven't seen any art that suggests there is a red rising sun motif on the back of Jester's vest, but I like the red design on that dark green, and the boat-stud keeps those plates together and helps hide their unsightly undersides. The fanny pack is a rocket pack that grants players enhanced jumping and parkour mobility in the game. The model has 14 points of articulation: neck, shoulders, elbows, wrists, abdomen, hips, knees, & ankles. The base holds a polycarbonate bar (light saber) that inserts into the bottom of a ski that forms his feet. I had to shorten that bar by about a millimeter to get the foot to be flat and flush against the tile flooring of the base. The abdomen has a couple of 1x2 grille tiles that aren't attached to anything, but trapped by the geometry of the surrounding parts. These move up and down as the chest and hips are posed to simulate pivoting pistons. Thanks for stopping by and having a look!
-
Lobst3r, a walking robot
Aswin posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
This is Lobst3r, the walking robot that can walk in any direction. It goes forward, sideways, it can turn and even rotate on the spot. Robots that can go in any direction are called holonomic or omnidirectional robots. Most holonomic robots are made with special wheels. This robot however is a walking robot. Its legs implement Klan linkage to walk. But the real trick is in the toes of the legs. The wheel on the tip of each leg is the secret to its holonomic capabilities. This small wheel is mounted perpendicular to the direction of the leg. As a result, the leg can roll sideways without any friction whilst still having friction in the walking direction. The base of the robot is triangular, the simplest form to create a holonomic robot. On each side are 4 legs that are linked to a single medium EV3 motor. An additional NXT motor under the tail of Lobst3r powers the claws of the robot. The robot has two ultrasonic sensors that are used to detect objects in front of the robot. If it sees an object it will try to walk around it. If that doesn't work it will snap it claws in self defence, back up, rotate and walk away. The US sensors are switched on and off to prevent one sensor picking up the echo's from the other sensor. As a result the robot seems to blink with its eyes The program is written in leJOS. LeJOS offers standard code to implement holonomic robots. -
Lets guess the name of this MOC ! ZGMF-X09A by demon demon demon, trên Flickr hint : Built to fight side by side with this guy :
-
Benny's Classic Space models - spaceships, robots, and buildings!
Murdoch17 posted a topic in LEGO Sci-Fi
(When the base and any other digital creations are built in real life, I will add those pictures into this page.) This is the beginning of a journey through the wormhole to a mini-figure called Benny and a civilization on the cusp of greatness. His continuing mission: to seek out new lifeforms, to explore unknown worlds, all in the name of of science and awesomeness. The year is 1980-something, the name of the theme is Classic Space. Classic Space fortress walls The base as it was ordered... will post a picture of the complete setup when built in real life. Here is the front gate of my space base to let the train (or road vehicles) through. It can safely open and close still using the HoG (Hand of God) method without impacting the flow of 9v current (still need to add those 9v tracks..) through the rails... though I wouldn't suggest driving through it with the door closed! This is one of twelve walls sections, held together with the other modules by four Technic pins.(two on each side) This is one of four of the corner modules. I redesigned these since last time to be less parts intensive and have fewer gaps in the wall. Astro Bot Recharge / Repair bay The inspiration behind this large robot-recharge port model is mainly inspired by the mech repair bay from 2006 set 7709. (Sentai Fortress) from Exo Force. I can attach the robot to a small mound behind each foot, where it holds it there by two studs per heel. The dark gray thin sidewall pieces located on three sides of the foot make sure Astro Bot 33 won't wiggle side-to-side and disengage from his charge port prematurely. The wall supports the mech repair bay and also gives me another two brand-new wall sections (in length) in for the base to play with at the same time! Classic Space HQ / Benny's skyscraper - 76038 MOD This building was inspired by my brother's take on set 6398, Central Precinct HQ. He added a back staircase module (which I have removed in favor of an older 2015 Avengers tower-inspired model / MOC I made a couple weeks back), while I removed the prison cell and changed the color scheme from white and black to blue and white with trans-yellow glass. The windows and doors were also modernized, and the large spinning sensor array added to the roof. I've also added connectors to the main base walls, which means the building is fully integrated into my Classic Space base. As previously stated, the rear was inspired by set 76038, Attack on Avengers Tower, from the Age of Ultron movie. This ultimately meant that the 1990's-style model's floors had to be stretched upwards by two bricks each in height to match the newer model's floor-plan. I really like the sleek wraparound window on the top floor of the building, as it is where personal Benny's office is. He gets to look out on the space base, and marvel at how things have changed since his creation in 1984. The right side wall opens up to reveal the inside of the building. Ground floor is official meeting space, second and third floors are for monitoring the radio telescope and other such devices across the galaxy. Fourth floor is the break room, while the fifth floor is Benny's personal office. (Note: On the outdoor patio on floor three is the monument to Jens Nygaard, the gone-but-not-forgotten creator of Classic Space.) The rear tower folds open for access too, and like the side wall, locks shut on a Technic pin. Here you can also see Benny's desk. Lunar Crater Crawler vehicle This model is based off 60192 (Arctic Ice Crawler) from the 2018 CITY Arctic theme, this MOD is called the Lunar Crater Crawler and moves boulders with it's larger gripping claw tool. It can seat one fully-suited astronaut figure. It also has printed controls in front of the space seat. Floodlights sit on the sides of the craft, allowing you to see on the dark side of the moon, while there is a clip for a handheld radio should you need to contact the command base. The rear should feature the Classic Space logo on a 4x2 slope, while a bumblebee stripe printed 1 x 2 tile goes above the logo. This printed pieces will be applied in real life once it's built. Lunar Armored Marauder hover-transporter The new set 75311 (Imperial Armored Marauder) has been transformed into a Classic Space version, complete with revised forward-facing side guns. All the hatches still open, but I couldn't use space seats inside this one, but there are plenty (four per vessel) of 2x2 modified tiles with just enough room for air-tanks in the model... at least I hope that will be the case! The rear of the Marauder. I just need to buy two copies of my digital file as shown, as that's at least $15 total cheaper than buying two sets and recoloring them after the fact. Any thoughts on this MOD? Classic 1950's Moonraker automobile Inspired by this recent @hachiroku build here, I have completed this new early 1950's car for Benny, who seems pretty happy with it. Looks pretty classy, right? The two doors open, but the obligatory black space seat is missing, because any more height and Benny would not fit inside. The rear has a license plate, the classic space logo, and two coverings partially obscuring the rear wheels. The roof is held on by four studs, and is as such removable. As a courtesy to the driver instead of the space seat, I have included a light bluish gray upholstery for the back of the seat. Classic 1980's Security Forces Jeep (x2) This model was heavily inspired by set 75916: Dilophosaurus Ambush from the first series of Jurassic World sets. I have turned that jeep into a Classic Space vehicle by subtracting most of the features and adding the CS logo to this piece on the trunk and a space seat for the driver. This CS version has a trans-yellow windscreen and a revised roll-cage. The rear of the vehicle has a spare tire, license plate and tail-pipe while the roll-cage folds back to allow for you to place the driver in the seat. Cosmic Explorer This is a heavily modified set 70816 (Benny's Spaceship, Spaceship, SPACESHIP!) to features a new canopy from set 75176 (Resistance Transport pod) for the front windscreen, plus a rear turret that elevates and rotates in lieu of the radar dish and repair robots. To match the new canopy, the crew quarters were enlarged and opening roof remade, but the wings still fold out via the same Technic mechanism as in the original set 70816. More recently, I added a new nose to the ship inspired by DC comics set 76028. (Darkseid Invasion) The rear of the ship features the three main engines. The sensor array that was once near here was replaced by a four-barrel repeating laser turret that can rotate a full 360 degrees and elevate to 180 degrees, allowing for cover fire in almost any direction. The wings fold out if the center engine is pushed inwards, ready for the foam-tipped missiles to be engaged and aimed at any Blacktron III enemies... I did remove those yellow missiles, as they were too touchy and could fire accidentally. The main canopy has been heavily modified to allow for crew to go between the engineering and navigation sections without having to exit the ship. The Unikitty-seat area was replaced with a opening canopy for the engineering and fire-control crew to see outside from their stations near the Imagination Reactor. Deep Space Fighters These ships are deep space fighters of the Galaxy-class. Each seat one figure and have enhanced hyper-drive making it nearly as fast as LL-929. (Benny's spaceship) This ship was designed to be a heavily-armed fighter, and features an enclosed cockpit allowing for long distance travel such as from system to system if in an emergency. The rear of each of the two ship's features two engines made up of four smaller rockets. Here is the cockpit, which can seat 1 pilot figure per ship. Interstellar Frigate I really like this ship and have since I first saw it, I just had to wait for the instructions for set 75293 (Resistance IT-S Transport from Star Wars) to come out to make sure it could be built in real bricks with the changes I had in mind. (which were quite a lot!) I'm so glad I chose to do it in LDD first before just buying random bricks, as it required SO many modifications to the design (including an actual windscreen and extended cargo bay!) and changing other colors, that I would have been completely lost just swapping parts out at random. The eight engines are attached in a completely different way to the set design, as 2 x 4 bricks with three Technic holes going straight down don't exist in LDD. This new design was the only suitable way to get them to work on the ship in a very tight space. Also, I added double raised fins to the rear of the ship, for that extra retro '80's space flair. The cargo bay is quite spacious for troops or freight as it has been elongated by four studs from the set's original length. (You can see it is loaded with five yellow space-crates above) The roof of the cargo bay comes off, while the landing ramps fold up / down for loading or unloading of cargo / security personnel. The front of the ship has a space seat for a single pilot with two large laser forward-facing cannons. The pilot's cabin also features actual controls and a real front windscreen. (unlike the stickers and tiles in the original set!) The cockpit roof folds away, just as it did in the original set, which you can partially see here. K8-E the robot dog - Benny's best friend After meeting the Doctor (Who?) and his K-9 (pronounced Canine) unit, Benny decided he wanted a pet. So he bought himself a retired space police bot named K8-E (it's pronounced Katy) who helps Benny with his maintaining his SPACESHIP! and home base of the fleet. The two robot dogs eventually teamed up to sabotage a Blacktron and Dalek peace treaty from being signed, thus keeping the Universe safe from their plans for conquest for the moment. K8-E even took a laser shot from the Blacktron secondary leader, saving K-9 from being killed in the midst of them leaving the self-destructing Dalek ship. When reunited with Benny and the Doctor a short while later, the robot dog was fixed up and given the nod of approval from the Doctor, and a happy farewell from K-9, who left with the Doctor in the TARDIS to go to parts unknown looking for the Daleks fleeing from their loss at the hands of K8-E & K-9. From then on, K8-E has been keeping Benny company while awaiting the return of K-9 and the Doctor. K8-E is actually modified from set 8399 (K-9 Bot), which is a 2009 Space Police III set. Astro-Bot 33 - Classic Space's Giant Robot You may ask yourself: "Why would the Classic Space fleet want a giant robot?" The answer is a simple one: "Who in their right mind wouldn't want a giant freaking robot!?!?!" This Classic Space version of Build Better Bricks' Iron Giant with the head of the previous @hachiroku version of the model's head added on. (consider it a mashup of the two Iron Giant models!) I made it into CS colors (black, light / dark grays and blue) with red and green light parts, and two yellow / black bumblebee stripe tiles. The rear of the robot. The 4 x 2 slopes on the arms are supposed to have this print. The mouth now can open to allow for posing... but unfortunately, it doesn't play nice with the shoulders, so the mouth must remain closed until I can figure out a better solution. Another thing that didn't work well was the rotating waist: it operated too jerkily and was hard to operate, so I removed that feature. Conveyex Crawler-Transporter This is a heavily modified Classic Space version of 2018 Star Wars set 75217 (Imperial Conveyex Transport). It's length has been doubled and the visible weapons have been removed, to make more room for passengers. Behind the trans-yellow glass of the former cargo-cars are seats, so that workers can get to Benny's space base without driving in themselves. (Call it a commuter light-railroad system, without the "rail" part!) The vehicle can be shortened or lengthened in modular sections depending on the needs of the specific mission, but in this particular case it has two crawler engine units, and two cargo hauler segments that can easily detach for maintenance or to drop more segments in / out. On each of the engine units is the dual drivers compartments, located on either side of the tread behind the square openings. Each car seat four figures, meaning the whole train hauls eight people (+ their air-tanks!). ....and yes, two of the handles on the doors are upside-down in all the pictures. Classic Space figures These are all my Classic Space figures. The thirteen green figures are the soldiers of the group, while while the six red suited people are scientists. The three blue figures are Benny (in helmet), Penelope (with pigtails), and Unikitty who are the officers of the group. The two other figures, (the red android and the robo-dog) are T-3PO, who serves as the translator to other species and computer systems, while the robo-dog is K8-E who happens to be Benny's personal pet / security guard. The astronauts you see here are the famous "Lost Six". These half-dozen brave souls were with Benny in 1988 when the space station they were on was ambushed by Blacktron I forces and blasted into a black hole. Benny managed to escape the station before it entered the gravity field, but only just in the nick of time. (He could not reach his ship mates due to a computer error with the hatch systems.) Benny's suit was damaged in the escape, and he still wears it like that to this day as a reminder of his failure to get his crew off in time. This is the last picture of the Lost Six, with Benny out of frame because he took the picture. (He was supposed to be in the picture, but he forgot to set the timer on that take.) Will we ever see these brave men and women again? Only time will tell! Meet AstroKitty (in blue) and PuppyNaut (in white)! I've had AstroKitty built like this since 2014 when I got Benny's Spaceship (x3) from the original LEGO Movie line. I had to find a novel solution to the head-falling-off problem. (double the body width and pretend it's a bigger spacesuit) I was very sad to see Lego never released a blue one of the upside-down 1 x 3 tile parts with hole used in the newer Unikitty! sets seen around 2018 to correct this error. I did, however, note the new arrival of Puppycorn, Unikitty's energetic younger brother from the TV show and was disappointed to see he never had a Classic Space variant, besides the "Alien" version. (which I don't count as actually being Puppycorn.) So, in short, I made one from his Dalmatian costume, made to be double wide like AstroKitty. Sadly, there is no Classic Space logo on Puppynaut, as there is on Astrokitty. (This drives my OCD nuts!) ...oh, and they have headlamps on both their helmets, to provide light in dark environments and a convenient hole for the unicorn horn to fit into. I have used what was left of the word astronaut as originally worded by LEGO, as in ASTRO goes with KITTY; so thus PUPPY gets hitched to NAUT. Thus, we get PUPPYNAUT to describe him. EDITED 5/21/21 added some newer models to the post. As usual, Comments, questions and complaints are always welcome! -
Hi All, Posting my first attempt at a Mech, titled The Jackal. I Started off with a basic frame and then tweaked my design over a few days to add bulk and detail on the armor. added some simple Photoshop effects for fun Feedback would be great or any ideas for weapons?
-
Name : Freedom Gundam. Pilot : Kira Yamato. Series : Mobile Suit Gundam Seed / Seed Destiny. Material : LEGO. Code name : ZGMF-X10A. Height : 21 inch. Wing's length : 15 inch. References : _Freedom gundam : anime ver, Real Grade, Master Grade 2.0 , Metal Build. _Strike Freedom gundam : Perfect Grade, Metal Build. My 2 main models are Freedom Master Grade 2.0 and Strike Freedom Metal Build. Fulll Video Review - see how all the articulation work in real life : or see more in my album : Flickr : https://www.flickr.com/photos/134378223@N05/sets/72157667572346161 MocPages : http://www.moc-pages.../moc.php/431161 Build to fight support side by side with ZGMF-X09A Justice Gundam : How this Mobile Suit look like without action base : Front Back (Beam rifle can be attached behind) Holding weapon On action base The wing can open like this. The open-function is built by Technic style (Rotate gear on each side) Using Beam Saber *Full Burst Mode All weapons are used as once : _2 CIWS guns (mounted on Head unit). _Beam rifle (on right hand). _2 Plasma beam cannons (hidden behind Wings unit). _2 Rail cannons (transform from Side Skirts). *Remember to watch the Video Review above to see how all the articulation work !. . . . or my previous moc , Astray Gundam : http://www.eurobrick...opic=117605&hl= Thanks for visiting .
-
[WIP] Mechanical Arm
Nazgarot posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I found I need something more flexible and stronger than a simple mechanical third hand to help me when I do welding. The Third Hand I have right now is rather clumsy, somewhat like this but bigger. The other standard variants are way to flimsy, and of little use for my purposes. Today I happened upon this, and immediately thought I need to have this! Both for usefulness and because it's cool. Then I thought it was way to expensive, and that I could build one myself. I first thought i could do it from metal, using the one I found as a blueprint for how to make it. Then it hit me it would be much cooler and much more fun to prototype it with Lego. So here I am. This is what I'm hoping to end up with, and I would much appreciate it if anyone has tips for how to make something like this, or links to other similar projects. The important part for me is that it needs to be strong and stable. I prefer using as few gears as possible in order to reduce backlash. It might be some time before I can start this project for real as I'm about to replace the roof of my house, but I'll try to update here as often as possible. -ED- -
[MOC] The Automatic Birthday Crisp Delivery Vehicle (ABCDV)
896gerard posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Sometimes, you have annoying things on a birthday party and with this MOC, I tried to solve at least one of them... For higher-quality images, click http://www.brickshel...ry.cgi?f=565441 (The first day, it's never public, which is strange) [edit]: MocPages link: http://www.moc-pages.com/moc.php/431271 for better quality images.. The video explains all trouble and how I solved it: -
Greetings Fellow Sci-Fi Fans, I present to you my version of the Bushwacker Battlemech from the PC game Mechwarrior 4. It is fully posable. It has great balance, and its strong. It took 2 months to design, perfect and build. I was up every night until 4 AM. It is captured in a running and gunning pose. I will try to make better pictures in the future. Feedback is welcome. Features of the BSW-S2 variant: The S2 is a variant of the Bushwacker that makes the 'Mech more effective at short to medium ranges. The 'Mech carries an ER Large Laser to allow the 'Mech to engage an enemy at long ranges as it closes. The 'Mech carries an LB-X Autocannon/10 or a Rotary 5 unit with 6 barrels, which can fire both standard and cluster ammunition for long to medium range engagement capabilities. For close combat, the 'Mech has two SRM-4 short range missile launchers, making it a powerful unit at any range. For added defense, the S2 carries an Anti-Missile System. Lego Bushwacker Mech Moc from Mechwarrior 4 by Andras Pacza, on Flickr Lego Bushwacker Mech - Running and gunning 4 by Andras Pacza, on Flickr Lego Bushwacker Mech - Running and gunning 3 by Andras Pacza, on Flickr Lego Bushwacker Mech - Running and gunning 2 by Andras Pacza, on Flickr Lego Bushwacker Mech - Running and gunning 1 by Andras Pacza, on Flickr Cheers, Tyutyu aka Andy
-
Hiho, here is my frindly AI Bot Cailin. It took some time until I came up with the idea with the head. If you want to see how I built the head, take a look at my flickr side. have fun kind regards Gama AI Bot Cailín by Gama Bomb, auf Flickr
-
Please help Benny to destroy the mega robot that wants to conquer the world.
-
My almost finish moc Name : Freedom Gundam Series : Mobile Suit Gundam Seed / Seed Destiny Fulll Video : LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr The wing can open like this .... LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr and Full Burst Mode like this .... LEGO Freedom Gundam ZGMF-X10A [Demo] by demon demon demon, trên Flickr I will soon finish the weapon and pose more action picture . Thanks for visiting !
