Search the Community
Showing results for tags 'Alternate'.
Found 153 results
-
Liebherr PR776 Dozer - Lego Technic 42100 alternate model
eric trax posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The idea for the B model in the form of the Liebherr PR776 appeared in December 2019. Unfortunately, I had no experience building alternative models, so first I assembled a simpler model - skid skidder based on Bobcat T870. Having already some experience and, what is important, knowing what I can afford during the build, especially the list of parts, I made it. I tried to make all the functions and as much as possible to make the original look like this The tactic I chose when designing was to check whether the new engines and hubs would fit in the 1:18 scale model (scale to the wheels). In fact, when I put the first hub between the tracks and the drive motors, I ran out of space in the chassis. Another problem was the new, long actuators. While they are great for lifting the blade, they are too long for the ripper. In the original, these actuators are very short. To keep the dimensions of the ripper I had to build them much more into the center of the model. This added another space problems and the need to place one of the engines at the bottom of the frame. I really wanted the model to resemble the original as much as possible, so I started building with modeling the hood. Then I took care of the blade, which consumed almost all DBG system bricks. However, the basic curvature was pretty nice. Its appearance gives a lot of visual effect. The problem was the shape of the cabin. I don't know who designed the original, but there is a suspicion that he was drunk. Fortunately, it was possible to create a quite realistic cabin and interior. It is masochism to use the Control + system on models of this scale. How to build in two large hubs so that you can replace the batteries from the bottom and turn them on from the top? The first hub is located under the hood between the tracks. From the bottom we have access to the battery and we activate it with a clever switch in - the left platform. The second hub is located directly under the cabin. This can be easily folded back to gives access to the control hub and turn it on using a switch in the cabin The model does not have a realistic suspension. I resigned from it because the model weighs over 3 kilograms. I really wanted it to be stable and the tracks did not make such terrible sounds as the model A while driving. There are, however, four tilt carts that make it easier to climb over obstacles. Some technical data: Length: 46 cm, Width: 25 cm, Height: 23 cm, Weight: 3.04 kg Drive and steering – 2x XLarge C+ motor Ripper – lift (Large C+ motor) tilt (Large C+ motor) Blade – lift (XL C+ motor), tilt (Large C+ motor) I wanted the application configuration to be as simple as possible, so I also created a custom profile in the buwizz application which greatly simplifies the configuration of the model control. I also made a layout to make the control panel pleasing to the eye. Instructions can be bought at Sellfy and Rebrickable: https://sellfy.com/m1longer/p/42100-dozer/ https://rebrickable.com/mocs/MOC-51120/M_longer/42100-liebherr-pr-776-dozer/ Custom stickers: https://www.mocsmarket.com/lego-mocs/lego-sticker-set-for-liebherr-776-dozer-42100-b-model/ Download custom BuWizz profile: https://cutt.ly/kfx57he -
[MOC] Autogyro - Lego Technic 42117 C model
Silvavasil posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi everybody! This is alternate model of the official Lego Technic set 42117The main feature of this model that it can drive around 2 meters. Realistic sound, both propellers rotate. YouTube When you push the model, the drive axle make the propeller works which produces the centrifugal force that force the drive works more longer. Follow my instagram: https://www.instagram.com/silvavasil_lego/ -
[MOC] 42099 alternate 'Jeepy'
gyenesvi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi All, I'd like to introduce my alternate model for 42099. It was inspired by the recently released Jeep Wrangler, in that it has a small turntable based suspension on both wheels. Since 42099 has the two large turntables, I thought I'd try and build a similar suspension. Also, since it has yellow-ish parts, I thought I'd build a body with Jeep-like features. Of course, not enough yellow parts for a full body, so I focused on the front (hood and the grill to be somewhat Jeep-like) and used to rest to make a consistent body at least. Building instructions are available from Rebrickable: https://rebrickable.com/mocs/MOC-62435/gyenesvi/42099-c-model-jeepy Some details I have opted for a simple suspension design by moving the turntables as close to the two axles as possible. The drivetrain is also very simple, putting the drive immediately to the differentials, resulting in slow speed but high torque on the wheels. The left and right arms holding the wheels are fixed, the whole front and rear axles are rotating and are damped by the springs. Due to the large turntables, a single pivot point is enough to hold the axles at both ends. Naturally, the size of the turntables is a bit of a problem for ground clearance (about 3.5 studs in the front and 4 studs in the back), but not as much as I expected (see below).A major challenge was to mount the steering motor on the front axle in a small space under the hood and to create a strong enough steering rig using only one side on the front of the axle (as opposed to the two-sided rig in the original model). The next challenge was to create a chassis rigid enough to hold the end points of the springs in a small pivoting mount to enable the lengthening of one side when the other one shrinks. Naturally, the arched pieces available in the model are useful for this purpose, with further reinforcements later on. The battery is placed in the middle of the chassis, providing a low center of gravity with easy access to turn it on. It is not a structural part of the model, so it can be taken out easily after removing a few body panels. Also, there's plenty of empty space inside the chassis to hide the cables.On the outside, I wanted to replicate some Jeep-like features with the few available yellow-ish panels. I decided to focus on the front, creating an arched hood with a massive front grill and lights. I wanted a consistent yellow body, so I used all yellow pieces for doors and hoods, and none were left for a roof, so I decided to build just a frame. Luckily, the curved corner pieces and the long black axles available could be pieced together for a consistent frame, that matches the style of the front grill. I think the overall proportions of the model came out quite well. I was also able to include a quite clean interior. As for actual performance on real terrain, see the video for my own off-road tests. Surprisingly, the large turntables are less often a problem in terms of ground clearance as I expected. I suspect it might be because with the fixed-arm pendular suspension, as one wheel is lifted, it also lifts the turntable half-way, so it is less likely to hit something on the ground. Also, with locked differentials it can climb quite well. Be careful however, on real rocks, it is possible to scratch the bottom of it, including the motors.The model can be controlled with the Control+ App just like to original model. More pictures Let me know what you think! Cheers -
After my 2 pick-up alternates, I returned to set 10265 twice more but this time to create 2 vehicles heavily inspired by iconic and classic sportscars from the 1960's in which Ford also played a key role, the GT40 and the Shelby Cobra which both fit perfectly with the 1967 Mustang. First the GT40 famous for winning Lemans. The GT40 was first built in England, but the later version in the US. GT04 main by Nathanael Kuipers, on Flickr The model features working steering wheel, opening doors, and engine cover with an engine that can be removed and displayed separately. GT04 open by Nathanael Kuipers, on Flickr Next is the Cobra Roadster, also a car that originated in the UK, but which Shelby with the help of Ford imported to the US. There it was equipped with a much larger engine that also required other changes to the chassis and suspension. I built this specific model for the TLCB Lock-down competition Cobra Roadster by Nathanael Kuipers, on Flickr This was a tricky model to render in bricks due to all its curves. Cobra Roadster rear by Nathanael Kuipers, on Flickr As with the GT40, this model features a working steering wheel and opening doors. Both front and rear open too. Cobra Roadster open by Nathanael Kuipers, on Flickr If you're interested to read more about the development or would like to see more pictures of either vehicle, please consider to have a look at my website NKubate.com. Thanks for looking!
-
I built 2 pickup alternates from Creator Expert sets. The first one is from the 10265 Mustang set, and to keep within the theme and time period I decided to go for a Ford F100 from 1970. The model includes steering by HoG, opening bonnet, doors and tailgate, a detailed interior and engine. Once done I thought why not try to build a pickup model from the 10252 Volkswagen Beetle too? So that's just what I did with this vintage American pickup truck somewhere from the 1930's. It has similar features as the 10265 alternate except for the steering function, which was not possible. Some pictures: Pickup trucks from 10252 and 10265 by Nathanael Kuipers, on Flickr 10265 Pickup Truck by Nathanael Kuipers, on Flickr Pickup Truck guts by Nathanael Kuipers, on Flickr 10252 Vintage pickup truck by Nathanael Kuipers, on Flickr 10252 Pickup truck rear by Nathanael Kuipers, on Flickr More information and pictures for model 10252 and 10265 at NKubate.com. In case you want to build your own copy building instructions are available at Rebrickable.com
-
Hi everyone! I am sharing an alternate build I made from set 31009: Small Cottage. Eurobricks user Rufus wrote a great review of the set here. It is one of my favourite modern sets, as I find it quite charming and to have a lot of potential in its relatively smaller size as buildings go. This build may appear simple, but was rather challenging to get just right. Allow me to show you some of the features. Below you can see the exterior, with the large sliding steel door, the utility lamp hanging alongside it, and the small pool which laps at the side of our building. Here you can see some of what was challenging - getting that red stripe all along the eaves while still being structurally sound took some patient rearranging and allocation of elements. Here is the interior. You can see the roof cutaway (and if you look closely, see some pot lights in the rafters), as well as the sink with water and faucet for cleaning up. Another challenge is present here - getting that cutaway symmetrical and stable, and having sufficient red elements for the gables. Every inventor's garage requires tools, and this one is no different. We have a drill press, a tool chest with an oil can, some shelving, and some crates of various material. All of this fits easily inside the garage. If you have a robot garage, you'd better build a robot! And here is what was left over. Not too bad, I think. This was a lot of fun to build and share. I hope you enjoy the pictures and description.
-
[C-MODEL] 42030 Rescue Jeep
jyd80 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Dear all, With the arrival of the new Volvo set, I felt like rebuilding my old 42030 front loader. The problem was that I still had a MOC built, standing in the cupboard since 2016 :s So I finally built some instructions for it (available at Rebrickable), and made a short video. Here is a presentation. The C-Model is a Jeep-like car (with Volvo colors ;) ) As the A model, it is fully motorized. The L and XL motors are connected to the transmission, and the servomotor ensures the steering (with Ackermann geometry, and working steering wheel): The two driving motors are connected by a differential, which allows combining their rotations. If we note x = 220 rpm the speed of the XL motor and y = 390 rpm the speed of the L motor), we can emulate 4 gears: L forward, XL backward: V = y - x = 390 - 220 = 170 rpm, XL forward, L off: V = y = 220 rpm, L forward, XL off: V = 390 rpm, XL forward, L forward: V = 390 + 220 = 610 rpm. The differential is also connected to a V6 fake engine, and the rear axle is pendular: Finally, the M motor is used to power a crane: Here is a small video to show it in action: Hope you like it! -
[B MODEL] Go-Kart (42102 alternate)
jyd80 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi there, Just made this simple alternate from the 42102 Mini Claas Xerion: It features a working steering wheel (using a direction with links, unlike the A model), and a working engine with a rear transmission. The LA holder is used as a cylinder and the piston uses the same technique as introduced in the 9393-B model. Building instructions are available on Rebrickable. -
[MOC] 42094 Alternate Builds
TGBDZ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Long time no see! Some of You maybe remember my love for excavators and alternate models - 5 years ago I participated in the TC5 challange for alternate builds with an excavator and thanks to Your support I won the competition. Recently decided to challange myself again with the same task of creating an alternate model of the excavator using a middle sized set. 42094 was a no brainer as the best choice - tracks, turntable, some gears, mini actuator - most of the major components necessary for a successful build. The biggest problem was the lack of the wormgear - it would increase control and strength of the extended arm. Nevertheless, I found a solution, and in the end I'm pleasntly surprised how the MOC turned out. Functions: Working tracks (duhh) no suspension, no boogeys, more stable that way Upper structure rotates, sadly didn't manage to attach a knob, so it's done by grabbing the upper part Working boom similar to my previous build Possible to change the height of the whole boom Bucket and the second section of the arm works together - If You reach further, bucket opens, and vice versa - if the arm is getting closer the bucket closes Arm and boom function is operated by a black knob made from small sprocket pieces, to gain easier access, the rear can be opened. Both of the functions can be switched using a LBG connector that switches the clutch piece. So guys, what do You think? Also, what other alternates You would like to see made from this set? And If You want to get the LDD file than check Rebrickable or link below: MODEL INSTRUCTIONS Cheers! -
[MOC] 42108 Set Alternates
TGBDZ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi there! At the start of January picked up the 42108 set (Actually wasn't planning on spending money on more Lego at the start of the year but saw a surprisingly cheap deal for a new set and just couldn't resist it). Naturally, opened the box, went through the instructions and applied all the stickers to their belonging parts and started to work on new alternates without assembling the original set (Yes, I'm a mad lad :D ) And who would have guessed.. my first alternate was another excavator.. I hope that people don't get exausted of seeing another one but this set turned out to be a great part pack for creating a sleek and fully functional wheeled excavator! Functions: Working steering - blue gear on the back Adjustable front shovel - manually, can be locked in place Adjustable rear outriggers - mannualy, can be locked in place Rotating upperstructure - Black knob at the rear of the chassis Fully functional arm - controlled by 2 seperate knobs on the top of the upperstructure Chasis storn enough and with the outriggers and shovel extended it can support the whole weight of the excavator and lift it from the ground. At this moment this is the second set that uses the new Large linear actuator, and it just makes reach on this medium sized excavator crazy good If You want to build it Yourself - Instructions available here: https://rebrickable.com/mocs/MOC-38023/tgbdz/42108-alternate-wheeled-excavator/?inventory=1#bi (Or simply look for TGBDZ on rebrickable) For the next build I wanted to make something different that I haven't tried before.. After Some tinkering with the parts a bit I started to build a rather large structure using the larg 3x11 curved panel pieces and after creating a large bathub like structure I decided to make an articulated hauler. I had atleast 6 wheels, for the center joint I could use the turntable, large actuator should cover the lifting of the cargo bed - all the major issues were solved quickly and here is the result. Functions: Working steering - no HOG - the center of the cab is so close to the swiveling point that it's easy to steer by pushing on the cab sides Fully adjustable chasis/suspension - front axle is solid and together with cabin is rotating on the turntable located in the center of the chasis - rear axles use double wheel boogies that easily gets over small obstacles Functional and tipping cargo bed - uses large actuator and is operated by knobs on either side Cargo bed can be locked at the back to prevent unecessary spillage of goods And just like for the excavator - I think the original 42108 stickers add a lot of nice touches to the design. Instructions for the Hauler will be available soon. What should I build next? At the moment I'm thinking of making two models at the same time - 42108 has 8 aviable wheels.. Will see :) Cheers! -
This is alternate model of LEGO Technic set 42106 - Hoonitruck, pickup truck inspired by Ken Block's custom truck. Model use only pieces from set 42106 Stunt Truck and Bike show released 1h 2020. Model has openable rear gate, doors, steering system with a knob behind the cab. You can remove duck tail, some front stufff like bash-bar and tow ring, change rear wheels to narrow ones and get street-legal custom pickup. 3D model or/and full instruction are on my plans list. All photos https://vk.com/album177639081_271161751 -
[C-MODEL] C-Model Index Discussion
Josephiah posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi all, This topic is for discussion of the new C-Model Index (under construction here), and for suggestions of C-Models for inclusion. I hope the index will help us all keep track of the great C-Models people have created, and in many cases, their instructions. I've managed to find a good collection to get started, but no doubt I will have missed some, so please tell me any you'd like to see added (or any mistakes/missing details/etc), and I'll add them in future updates. Rules for inclusion: Uses parts from only one set; That's about it! Where possible, I'll list details of EB topic, youtube video, instructions, and part count. Models detailed on EB are obviously favoured, but I've already come across one or two from elsewhere which I feel deserve to be included. They are listed in no particular order. Where individuals have listed their creations as C-Model, D-Model, etc, I have ignored this and called them all C-Models, because each designer's classification doesn't work when all compiled together. To keep this manageable, I'm going to try and release these in groups according to the original set. To start with, here's all the C-Models I have managed to round up for the set that got me out of my dark age - and perhaps its no surprise, given the sheer number of useful parts: [EDIT: moved 42009 into the index.] Hope this is useful - suggestions welcome. Jo -
Upon receiving the 2016 Clone Turbo Tank I soon became curious of it's potential. I had seen rather negative reviews with the Tank as the subject matter, and soon became worried that I had made an unwise purchase. However, I happened upon BrickBros UK YouTube channel and soon thought of an idea. Perhaps I could turn this around. Using pieces from the Clone Turbo Tank I began work first on a Venator-Class Star Destroyer. Within a short period of time I became convinced that this particular vessel wouldn't work, so I decided to start over again and attempt a Pelta-Class Frigate due to the 2016 Rebel Combat Frigate being on my mind. Once finished and run out of plates I glared down upon my abomination and decided that I would rather see what Eurobricks may try. So here I leave you with a quandary. Imagine: The Galactic Republic ordered a shipment of cruisers from Kuat-Drive Yards to be delivered to Coruscant. Upon arrival it became apparent that there had been some sort of misunderstanding: the shipment contained only Turbo-Tanks! Instead of succumbing to dread, republic engineers decided to use the parts from the tanks to construct the cruisers they had ordered. Your Goal: (If you choose to accept it) Construct an alternate vessel using ONLY parts from the 2016 Clone Turbo Tank. This can either be done in LDD or reality. Upon completion upload an image (or more) to this topic. I suggest for the LDD creation that you use the following file: Clone Turbo Tank Sadly, due to my economic status there will be no prizes for a "winner." However, the best looking ship will most certainly join my fleet of Republic Vessels. The following vessels would be appreciated: + Consular-Class Cruiser + Pelta-Class Frigate + Aquarius-Class Light-Cruiser + Acclamator-Class Frigate + Venator-Class Star Destroyer I would share images of my failed attempt but I fear that its disturbing complexion my cause a disruption in your appetite or cause nausea. I thank you dearly for reading this long and rather odd post. I do hope that you attempt this challenge and post your own creation, whatever it may be! I wish you the best of luck, and may the alternate building begin!
-
Most of you probably remember when Lego did alternate builds on the back of boxes in a lot of themes between the 90s and mid 2000s. A lot of these were very bizarre, but which stick out to you as exceptionally weird? All themes welcome
-
Let me introduce myself and tell you something about this new topic. Some of you may know me in connection with modification of alternative model from set 8052. I modified it into truck with work platform last summer and provided you building instruction via brickshelf. It is not my only creation so I decided to share my other creations with you too. One more note before introducing my models – I am focused on building models from one set so they could be named as “unofficial alternative models”. It’s enough about me and let’s look at what I have for you now! This is truck with work platform I spoke about above. My latest creation is “telehandler” also from set 8052. Honestly it doesn’t have telescopic boom but at least it looks like it has... :) It features following functions: lifting boom via linear actuator and medium motor with gear ratio 1:3 (it is as slow as lifting container in main model) rear axle steering with eccentric control via beacon on roof of cabin – this was little puzzle because lack of bevel gears front stabilizers which are able to lift front wheels little bit above land adjustable rear mirror (I like especially that one on side of battery box)
-
Hey everyone, I'm back with another alternate model, this time for the latest modular - 10264 Corner Garage. I posted the exterior in the set's thread back in February and had to put the project on hold for a bit. I came back to it this month to finish the interior and you can see the result below. It uses 2190+ pieces, so about 85% of the original set. A lot of the very specialized pieces and Technic pins left over. Initially I wanted to make 3 fully furnished floors but it soon became apparent that I wouldn't have enough pieces for everything. The floor would have to be compromised a lot due to a lack of plates (since the original has an unusual floor shape) and there also weren't enough pieces left for furniture, without combining colors willy-nilly. So I settled for a store on the ground floor and an appartment on the top. Building these alternates, I'm starting to realize why Lego hasn't produced a classic straight modular for a while. The latest ones we had were DD, DO and PR - and while DD's and PR's sidewalks are straight, the buildings themselves are more corner-y. Having only one exposed side makes the building looks less interesting standalone. I think I will go back to corner modulars or adapt Lego's philosophy of "straight-but-corner" for the future. Seems like more fun. Enjoy the pictures below. You can get the instructions here.
-
Alternate MOC models from official #LEGO Creator sets
Peteris_Sprogis posted a topic in Special LEGO Themes
Custom design alternate MOC model made using pieces from official LEGO sets. Let's start off with the 31074 Rocket Rally set. More to come! -
[MOC] Formula 1, 8070 alternate
jyd80 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Dear all, I would like to present a one-set MOC I realised based on the 8070 supercar. It was done after COP 21: an environmentally friendly alternate that does not use the PFS elements of the original set :D While deprived of PFS, this Formula 1 features quite a few interesting functions: 4 independent suspensions Direction by HOG and steering wheel A V8 fake engine A 2 speed gear box (accessible from the cockpit) A moveable spoiler (gear under the right side) An openable engine cover So basically, that is more than what the 42000 set offers ;) (yet with no optional motorisation) Here are a few pictures: A view from the cockpit: Opening the engine cover: The spoiler and V8 engine: From above: From below, showing the mechanics for opening the engine cover and moving the spoiler: Here are the left-over parts: Hope you like it :) Any comment most welcome. -
[C-MODEL] 42075 - Dune Buggy
Tomik posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Let me introduce you my latest alternative model - Dune Buggy built out of set 42075 (First Responder). This buggy is my tribute to two special sets: 8829 (my very first LEGO set) and 8048 (the set that definitely ended my dark age). It features front axle steering, rear axle suspension, V2 fake engine and opening cab cage same as original models. I wanted to add differential but it would make engine block too high so it has just "one wheel drive". I hope you will like and any comments are welcome. -
Instructions available here. I'm sure I'm not the only who on one hand appreciated the different direction Lego took with the DD design, but on the other hand found it hard to incorporate seemlessly into an existing town layout, since the architectural style is so distinct. So I set out to rebuild the set in a style more resembling the other modulars. And the result is the Internet Café Corner Modular. I almost gave up halfway through when I realized there wasn't enough bricks to build all the side walls I wanted, but in the end I managed to scrape together enough pieces to build everything I set out to. The first floor contains a couple computers to use for internet access and a small café with free Wi-Fi. The second floor has some living space and the rooftop a small garden.
-
[MOC] Sydney Opera House 10234 alternate model - The Robotics Lab modular
Huaojozu posted a topic in LEGO Town
Rebuild the Sydney Opera house as The Robotics Lab, the new high-tech institute in town, specializing at mech prototyping and AI. Take a sneak peek at the latest robot the folks at the lab are building - and if you want, use more parts to finish it! Transforming this set into a 32w modular was certainly a challenge. As opposed to the Big Ben, which has a lot of small parts that lend themselves nicely to decorations, the Sydney Opera House has a large amount of specialized pieces and technic parts that don't really fit well with a standard modular. When I saw the amount of ball joints included, I immediately remembered my Bionicle MOCing days and thought about making a mech out of them. But I still wanted a modular to add to my city as well, which presented an interesting dilemma. I wanted to use the white roof pieces as armor plates, but their scale meant that the mech would be several feet tall if built like that. And there was no way the modular would be able to house it. I thought about making a scene where the mech was destroying a half-damaged building, but that seemed hard to incorporate into people's towns making it look out of place. So in the end I went with a solution of a Robotics Lab, where pieces of the Mech are being constructed and assembled. That way there is a nice scene in the modular, but it's tucked away and not clashing with the standard town aesthetic. And in case anyone wants to finish the design, they only need to add a body and an arm to have the finished product. The large amount of dark windows are well suited to a "secret" project, keeping it away from prying eyes. With no doors in the set at all, I had to make due with brick-built ones using hinge pieces from the set. I am especially proud of the tilted roof windows that ended up being perfectly LDD legal, which is something that's always a worry when you design with real bricks first. The first floor has the legs mounted on a wall, ready to be attached to the final body, as well as an arm being worked on by a group of engineers. There's also the AI sign, just in case it wasn't clear to everyone what's going on here. The second floor (and the roof) have no floor, accentuating the verticality of the building, leaving enough space for the Mech to be assembled (though they will probably have to airlift it out when it's done). There is an engineer doing final checks on the head of the Mech, using a platform and some adjustable lights. In the end, I am really hope as to how this project turned out. I may go and use the remaining parts to actually build the body and recreate the destruction scene described above, though that will probably take me some time. I hope Lego will release a new large scale Creator Expert set soon so that I can try rebuilding it as well (the Roller Coaster isn't really a modular material :D). The instructions are available on my rebrickable page, where you can also check out some other cool alternate models. https://rebrickable.com/users/Huaojozu/mocs/ -
Hello, this is my second alternative set for the 31065 townhouse. It's a lighthouse Enjoy and comment! https://rebrickable.com/mocs/MOC-15030/Damiano_Anger/31065-lighthouse/#comments https://rebrickable.com/mocs/MOC-15030/Damiano_Anger/31065-lighthouse/#bi
-
Have you ever wondered how to end a row of modulars in a natural way? One of the available options is to introduce a water feature, be it a beach, lake or a river and then use that for a nice natural progression. In this case, I took the Big Ben set and rebuilt it as a 32w modular that's meant to sit at the end of your street and transition into a beach, bay or a similar feature. I wanted it to evoke the placement often found at beach resorts with a walkway "onto" the sea. It's kind of a faux corner building, as it has 2 adjacent sides of the facade exposed, but only one pavement. Since 10253 doesn't contain a baseplate, it sits on standard plates included in the set, making it slightly higher than other modulars. You can easily solve it by putting everything on a 32x32 baseplate and adjusting the pieces slightly to allow for modular connections. If you like it, you can get instructions here: https://rebrickable.com/mocs/MOC-14123/Huaojozu/the-lounge-10253-big-ben-alternate-model-modular/ Since there are no doors in the set, I solved it by making a sliding door as commonly seen in malls for example. That also determined what kind of building it's going to be - a store, hotel, casino or a similar high-end establishment would fit best with such pronounced doors. The Big Ben ski pole decorations also serve well to give the appearence of rich-ness. It was a bit of a struggle to make the interior, as the 10253 set contains an awful lot of tan bricks and not much else. But in the end I am happy with how it turned out. There was only enough plates to make floors for two sections, so the roof is just that - a roof. I've at least made the statue on the second floor a bit higher to justify the space. It was a lot of fun to do this and I am already looking forward to my next project, which will be an alternate model for the Sydney Opera House 10234. It's going to be interesting to see how so many curved white pieces can be used. And since it also has lots of blue, it will make a nice complement to The Lounge - sitting opposite of it and ending with the sea as well.
-
Alternate MOC model from official LEGO City sets. Let's start with a few LEGO City 60182 set alternate remake models. 60182 Truck and trailer 60182 Hot Rod Duel 60182 Minivan and pickup 60182 Dragrace cars Thanks for watching!
-
This is a build I have been wanting to do for a while, and thought I'd share with you guys on the forum. In this build I'll be combining one of my favourite sets with one of my least favourite sets. The 7900 heavy loader set is one of my favourite sets of all time. I love the cab-over design and the three axle chassis, and although its big, I think it looks perfectly proportional for what it is, and hasn't dated as much as other sets I own from the same release year. The truck looks awesome and beefy on its own, but the bridge that came with the set is too large to be sitting on the back of it all the time, and without a trailer or implement to tow it isn't of much use. There are no other semi-trailers that are compatible with the truck, and any custom trailer or implement that I've made has doubled up on what I own already. In this build I will be combining the 7900 heavy loader with the 60060 auto transporter, one of my most hated sets. I'll be making a new dual-axle chassis for the semi-truck and putting the car transportation bed on the back. I've already tried a test fit of the parts and it looks great. The 60060 auto transporter is very minimalist, and looks silly when it isn't trucking anything around my town. The proportions are just wrong, and with such a small puny cabin, anything that I pose on the back that's wider than 4 studs looks silly. The 7900 cabin would be a nice touch, and allow me to pose some bigger vehicles on the back without it looking dumb. I'll post changes here, but all photos will be uploaded to an album on google drive: https://drive.google.com/drive/folders/1XzrzH4sKs5NiD6B9WTDTMNCHkkoMG5xk?usp=sharing
