Search the Community
Showing results for tags 'trains'.
Found 157 results
-
This picture is how it looks on my layout right now. All of the following items sit on two 6 x 3 foot folding tables placed in a upside down "L" format. I hope it's okay I included town buildings in this post! Layout Width: 6 feet Layout Height: 9 feet STRUCTURES & TRACK X51 Rail RC Straight X35 Rail RC Curved X2 Train track switch left X2 Train track switch right X1 Victorian Station (Barretts) X1 Victorian Signal tower X1 double track train shed (XL) X1 Water Tower X1 Coaling tower LOCOS & ROLLING STOCK X1 Mikado (2-8-2) steam locomotive X1 Mogul (2-6-0) steam locomotive X1 American (4-4-0) steam locomotive X2 Generic Boxcar X1 Bobber Caboose X1 Flat car with automobile load x1 Gondola with rock load X1 drop side gondola X1 combination baggage / coach (dark green) X2 Passenger car (dark green) X1 Observation (dark green) X1 combination baggage / coach (dark gray) X3 Passenger car (dark gray) X1 Observation (dark gray) X3 Passenger car (reddish brown) TOWN BUILDINGS X1 Saloon X1 Military Surplus store x1 Tudor-style House X1 Bank X1 Tavern X1 LEGO Train Cub building X1 Sinister Mansion X1 Johnny Thunder's office (XL) World City Train Shed I made the shed longer than the original set number 10027 by 4 tracks, and widened both stalls by 1 stud on each side. (This makes it so 8 wide trains can fit) I added a middle section, and threw out the old hinge-open plan. (left side, middle, and right side)The shed is capable of holding the modified 2-10-4 Texas type steam engine, side-by-side with my ALCO FA & FB diesel units. The shed used to be modular in 3 sections (two end segments and one middle), but it was very weak in the center. I then decided to redo the model into one large section, but the problem then became that the storage became nearly impossibly difficult... I have a a big wooden case for it, but it makes if hard to go up / down stairs. Victorian signal tower This Victorian-era tower features a signal bridge, a spiral staircase to connect the two floors and a signal / switch computer from more modern times. It was inspired by my Victorian Railroad depot, and will eventually be built for my layout after the station get finished. Victorian railroad depot (Barretts Station) The station features four removable sections: the tower roof and second floor, plus the left and right platform extensions. The building also has an interior with ticket desk, three seats and a fireplace on the lower floor. The upper room features a desk with chair. Sinister Mansion This classic 90's LEGO-styled model was originally built in 2007 by a Brickshelf user named "Widdi". That user uploaded the instructions which I stumbled upon and built / modified in Lego Digital Designer. I added another story for the tower, put furniture inside and worked a garage into the structure. More recently, I have redone the tower and removed some of the windows. Ironwood Lego User's group (IronLUG) This model houses Iron LUG, the local LEGO Users Group for Ironwood - area residents. It is situated in an old pharmacy that has been renovated into a display area. Stone Bank I took set the Bank from the 2011 Harry Potter LEGO set Diagon Alley (number 10217) and gave it a make over into a more City-like set. First I straightened the columns out, and added a more protected Bank teller area. The vault was shortened width-wise by 1 stud, making it 3 studs thick, (plus the door, of course) to allow it to sit closed next to the teller area. English tavern This English style tavern was built from set 10193, Medieval Market Village, and expanded by my brother to have an inside staircase and a better chimney. Bob's Adventure Supplies This building was originally part of set 10217, Diagon Alley, specifically Ollivander's wand Shop. I added a rear to the building and redid the interior to have more of a Military Surplus store look. The store is currently owned by Bob from LEGO Universe, and was finished in late 2014. Backwash Saloon This model was inspired by set 79109, Colby City Showdown from the 2013 Lone Ranger theme. I turned the 1 story bank into a 2 story saloon, complete with two lift-away sections to access the inside. Tudor house This building was originally the Blacksmith's shop from set 10193, Medieval Market Village released back in 2009. I got it in 2011, near the end of it's production run. It has been turned into my mini-figures house, complete with furnished interior. Johnny Thunder's office Since the last time I uploaded Johnny Thunder's office, I did a Bricklink inventory of the parts list and found that the first model is way cheaper than the following versions I made. It may be not as fancy, but it get the job done and looks okay too. Mikado steam engine The locomotive is a 2-8-2 (two leading, six driving, and two trailing wheels) steam locomotive. Engine number 5916 usually pulls the Meramec River Runner. Combination baggage and passenger car for the Meramec River Runner. Three identical passenger coaches The observation coach lacks the letters BRS (standing for Brick Railway Systems) but it is owned by that line. Mogul steam locomotive The locomotive is a 2-6-0 (two leading, six driving, and zero trailing wheels) steam locomotive. Engine number 4613 usually pulls the Emerald Express. Combination baggage and passenger car for the Emerald Express. Two passenger coaches The observation car of the Emerald Express. The letters BRS stand for Brick Railway Systems, the owner of the train. American steam locomotive This engine is a 4-4-0 (four leading, four driving, zero trailing) steam locomotive. It is numbered 12 and pulls a excursion passenger train. This is the train that is pulled by loco number 12. As a side note, the chains on the car ends have a glitch and refused to bend. They are supposed to sit on the 1x1 clip plates, and not the handrail itself. This post will be updated as time goes on with more real world pictures of trains and buildings. Any thoughts? EDIT: here is my layout as of today, the 21st of May 2015. In this picture you can see my dark green train with 2-6-0 steamer (second track to the back) my freight train with a BR Class 09 in lead (furthest track to the rear) The other vehicles are Bob's 1978 auto, a 1950's double-deck bus, a LEGO Movie police car and a VW bus. (you can't see the bus from here, nor can you see my Ford Anglia, but trust me: they are there!) The Adventurers seaplane is on the extreme left, next to my 7997 style train station. My town is on the right, with the saloon, Dr Who TARDIS and bank on the extreme right, while the Military surplus shop, tavern and Iron LUG are on the mid-right. The black and red models in the center are my current black and red train shed, a water tower, and the tallest object on my layout: the coaling tower. Sadly, the 2-8-2 is not here yet, with only one more Bricklink order that was supposed to arrive today. (It did not show up.) We did receive someone else's package by mistake instead! EDITED 5/27/15: Added the 4-4-0 and a new engine shed. I still need to take pictures of the 2-8-2.
-
I'm new on Eurobricks. Just wanted to share the project that I'm doing in the evening hours with a couple of colleagues: Sioux.NET on Track. See more at https://siouxnetontr...wordpress.com/. Sioux .NET on Track is one of the expertisegroups of Sioux Embedded Systems in Eindhoven, a group of enthusiastic colleagues who come together after working hours to get experience with Microsoft.NET (mostly C# and WPF). To make learning fun, we develop an application for making a full automated Lego train, using Lego Mindstorms and Lego Power functions. One of the things I managed to do, is to use the NXT as a remote control for the EV3. You can see a small movie at our Youtube channel: It is not a finished product, but you can have the source code for free. The current part that I'm working on, is the Candy Rotation Stock. See a video of the prototype here: Please feel free to leave a comment here or at the Blog. Let me know what you think. Best, Hans Odenthal -
We had a little accident. Someone, who shall remain nameless, cranked up the speed on my 60051 High Speed Train, and it flew off the table and exploded on the floor, about 3 feet below.... It broke up into quite a few pieces. Well, the only real damage was a bogie plate that snapped off its pin. This was the one attached to the drive motor, I guess because it weighs more, it broke on impact. Is this repairable? Has it happened to anyone else? I had some spares and replaced it, and the train is no worse for wear. I just want to know if I should throw out the broken part or try to fix it. Would super glue or some other product work, or is it hopeless?
-
Early LEGO Trains of Mine - steam - diesel - passenger coaches
Murdoch17 posted a topic in LEGO Train Tech
I have been continually modifying the steamer for 11 years, the diesel for 4 years, and the coaches for almost a decade. The steamer and coaches were produced by my father, while the diesel is a MOD of another person's BR class 08. The steamer is getting new number-plates, working pistons, and drivers soon instead of the original model's 9V-era wheels. The diesel is getting cosmetically updated with a new number, and the coaches are (basically) staying the same. 0-4-0 steam switcher MOC This push-along copy of the engine in set 7722 was my gateway into Lego trains. I later added a My Own Train (set 3741) style tender, a new boiler, and so on. I am now adding working pistons (thanks to Hunter Dobbs!) and numbers to the sides of the engine and tender. The engine has gears as stand-ins for medium Big Ben Bricks wheels. BRS goes on the tender, while 5972 goes on the engine. The number of the engine is a tribute to "Olton Hall" (No. 5972) or "Hogwarts Castle" from the Harry Potter films. I really liked that engine when I was little. Fictional background for the steamer: Built in 1929 by Baldwin Locomotive Works for Brick Railway Systems (BRS), engine #5972 was supposed to be part of a 55-strong engine order, but the Great Depression started, causing BRS to cancel the last eight engines, leaving 5972 the last of it's class. The type has been painted in standard black with a red stripe. LDD file for the steamer: http://www.mocpages....1430843115m.lxf BR Class 09 Diesel switcher MOD I borrowed this British diesel design from Eurobricks user ChromeKnight in 2011, and made it in real life for Christmas of that year. This model was my introduction to Studs Not On Top (also known as SNOT) and has been very helpful to me over the years. The rear features three tail-lights. The number of this engine (8311) is the reverse of it's original number, 1138, to better fit with my numbering scheme for my trains. Fictional background for this diesel: In 1960, Brick Railway Systems (also known as BRS) was trying to find a good multipurpose (yet small) diesel switcher. It noticed the success of the British Railways ' Class 08 and so BRS asked the English railway if they would be willing to part with some about 10 Class 08's. The British took their time, but responded with one better: Class 09's, which have a higher speed of about 28 Miles per hour. Desperate for relief for their strained steam switchers, BRS said yes, and in April 1963, ten Class 09's made the journey across the Atlantic Ocean to BRS, whereupon they were numbered 8310 to 8320 and painted black with a single red stripe. LDD file for the diesel: http://www.mocpages....1430843320m.lxf Two-Axle passenger coaches These cars were inspired by two 4.5V sets: set 7722 "Steam Cargo Train, Battery"'s mail car & set 7715, "Push-Along Passenger Steam Train" and it's two passenger cars. My dad built these for me in the early 2000's. I added a passageway through the front of the mail / baggage car to allow the conductor to do his duties and made the bright colors of the original train more subdued with good ol' Brick Railway Systems black with a red stripe. The rear of the baggage car has room for the letters BRS, standing for Brick Railway Systems. LDD file for the coaches: http://www.mocpages....1430843654m.lxf Well, until I get real pictures taken of these, that's it for these. Any thoughts? EDIT: added the fictional backgrounds for the diesel and the steam engine. -
Dear Eurobricks friends, I've decide to start this topic in order to show you the layout of Falkenstadt, which is my LEGO world. Unfortunately, I don't have the physical space needed to have it set permanently (this layout measures a humble 11 x 4.60 meters), yet, most of it is already built and waiting in containers till I have it. I've been collecting LEGO since I came out of my dark ages, about 10 years ago. During this time, I focused on getting those sets I drooled over in the catalogues of my childhood, MOC building and getting many of the newer sets that appealed to me. I've collected Castle (mostly from the 80's), Classic Space, Classic Town, City, Pirates, modulars and trains. My main goal was to try to combine all this different themes into a single layout and that it would still be "believable" and coherent. During my childhood I did quite a bit of travelling through Europe and the one thing that really stroke me was how some cities managed to keep mostly intact buildings and whole areas of their medieval ages (I'm from Argentina, and the oldest thing here isn't older than the 1700's). Nuremberg, Rothenburg, Prague and Budapest are just some of the examples that struck me most. So, when thinking my layout, I decided to try to combine all the themes and give them a fictional historical frame, defining areas in it that went along with the different time periods, architectural styles and the blending between them. Another thing that was important to me was how to keep relative scale between sets. If you lay a 80's town set just right to a modular, it simply gets dwarfed and looks ridiculous. That's why I also tried had to come up with an intermediate scale which I call "semi modular", which helps with the blending. Most of my MOCs are in that scale. I'll be updating this topic as regularly as I can, taking pictures of the different MOCs for each area or uploading rendered images of those which still haven't been built in real bricks. So, after this brief (????) intro, let's start with the History of Falkenstadt and the general plan of the layout!!! History of Falkenstadt The history of the territory over which today sits Falkenstadt (Falcon's City) is extremely rich and dates back to the seventh century AD. At that time the region was inhabited by barbarian tribes of relatively peaceful character. In 676 AD, a group of Benedictine monks sent by Pope Donus, settles in the area in order to evangelize the barbarians and build the monastery of St. Stud, which's remains, repeatedly rebuilt, today stand in the outside of the city. In the year 890 AD the monastery is attacked by Viking raiders, burnt to the ground and all its occupants are killed. Horrified Pope Stephen VII decided to send a new mission in 930 AD, but this time with the support of King Johan Der Platen, who sends a contingent of knights under the command Knight Of Chevron. This new mission not only reconstructs the monastery, but builds a nearby fort. It is built with limestone from a nearby quarry, characterized by an intense yellow color, so it will be known as the Golden Castle. Around this fort will bloom the first city in the area. The prevailing peace is interrupted again in 960 AD. A new Viking raid, not only destroys the monastery, but also manages to capture the fortress and destroy most of the city. A few people manage to escape to the north and into in the woods. According to chronicles of the time (known as the Monastery of St. Stud Chronicles), among them is a young hunter (a falconer), who in his escape, and after bloody combat with the brutal Viking raiders, manages to free several of the monastery's monks. The chronicles do not mention his full name and just refer to him as Bern The Falconer or simply as "The Falcon" (Der Falke). The group of refugees settles in the forest and from there wage a re-conquest campaign led by Der Falke, harassing the small Viking garrison which had established in the monastery ruins. In 990 AD the now old Der Falke leads his troops into a fierce attack which definitely expels the Viking invaders. Thus began the reconstruction of the Monastery of St. Stud and construction of a new city. It was decided not to use the ruins of the Golden Castle as the superstitious people considered them cursed. Land was then elected to the south of the Monastery of St. Stud, considering them the most suitable. Aware of the re-conquest, King Oleg Der Platen (Johan's son and successor) convenes the septuagenarian Der Falke to his cohort, knights him and gives his family the coat of arms o the black and white eagle over inverted background. Also, he and his successors are appointed as protectors of the Monastery of St. Stud and made lords of the land surrounding it in "an extension of 50 baseplates". Der Falke returns to his new domains and decides to undertake the construction of a fortress at the entrance to the fjord, in order to protect from and prevent future Viking raids. He selects a rocky promontory at the entrance to the fjord which he names Falkenstein (Falcon's Stone), name that will take not only the fortress, but his descendants too. According to the chronicles of the Monastery of St. Stud, Bern Falkenstein dies the night of December 24th 1000 AD, at 80 years of age (age unusual for the time) without seeing finished the fortress he began to build. The location of his grave is unknown, but recent archaeological studies suggest that his remains rest under the main arch of the tower of the fortress of Falkenstein. He is succeeded by his son Ludwig von Falkenstein. Little is known about the Ludwig's mandate, beyond the not at least important fact that he completed the construction of the Falkenstein Fortress and that he fathered twin sons Otto and Gunther von Falkenstein in 1050 DC. On his deathbed, Ludwig calls his offspring and requires them to swear not to fight for his succession. They solemnly swear and Ludwig dies within hours. Gunther and Otto then decided to divide the family domains, swearing loyalty to each other ad eternum. Otto keeps the family's coat of arms and the Fortress of Falkenstein (as well as the title of Protector of the Monastery), while Gunther chooses for himself a new emblem with a winged sea serpent. Despite maintaining the same surname, Gunther is known hereafter as the Black Knight because of the color of his favorite armor. Given his adventurous spirit, Gunther chooses the lands to the east and on the opposite shore of the fjord, which is still unexplored. There he builds his castle, which still exists. The brothers also divide productive tasks. Otto dedicates the work of his servants to agriculture while Gunther is dedicated to livestock. In 1090, to commemorate the feat of the Re-conquest led by his grandfather, Otto formally names the city as Falkenstadt. He instructs to build a large building to officiate as Court and Council Chamber and in front of it he starts building a cathedral. Both buildings are preserved today, serving the first as Parliament. He also builds the first city walls. Of them, the only remaining section is Falcon's Tower, now recycled and transformed into a train station. The region will undergo a period of peace and prosperity for the next 10 years. But in 1100 everything will change. The grandson of King Oleg Der Platen, Olaf II, decides to ignore the land titles given to the Falkenstein family and requires Otto and Gunther to pay exorbitant taxes. They both refuse and Olaf II invades the region and sets city of Falkenstadt under siege. Before this takes place, Otto and Gunther manage to retreat to their respective strongholds. The siege of Falkenstadt lasts two years until in 1102 eventually falls, victim to famine and plague. The population is reduced to a few hundred, who are expelled from the city. Most of these refugees, like their ancestors, seek shelter and subsistence means in the forests north of the Fortress of Falkenstein. A small group, led by Hans Wolf will settles in a former guardhouse and begins a guerrilla war against the invader. The group will be called the Wolfpack. For the next 20 years the area will witness countless battles between the royalist troops of Olaf II and the coalition of Otto, Gunther, the Wolfpack and the People of the Forest. During this period the current city gates erected as part of a new defensive system. This is why they still bear the Lion's Coat of Arms, as a reminder of the presence of the invader. Olaf II also builds a fortress on the northwestern edge (to ensure his supply chain) and a new bridge over the River Schön (both still remain). By 1124 the Coalition has managed to besiege the royalist troops behind the walls of Falkenstadt. This siege will last one year, until finally the city falls after a fierce assault led by Otto Von Falkenstein. During the assault and having already freed nearly all of the city, Otto found his death when struck by an arrow fired from the tower of the City Council (where his statue now stands). Otto dies without heirs and without seeing the completion of the Cathedral and is buried on the spot where he fell. After the Otto's death, the population asks Gunther to assume the mandate on all family land and in a strange fact for the time, proclaim him King. Gunther is crowned in the unfinished Cathedral on December 3, 1126 and establishes his throne in the ancient fortress of Falkenstein. His reign, however, did not last long. In 1135, he dies at age 85, leaving as legacy the foundations of a legal system and having completed the Cathedral's construction. His remains rest in the south chapel of it. Whit this the Chronicles of the Monastery of St. Stud come to their end. For the next 500 years, the city will enjoy peace and prosperity until in 1652 it is ravaged by British pirate raids. Significant events of this period include the construction of the El Dorado Fortress on the opposite side of the fjord in 1690, which worked in conjunction with the Falkenstein Castle and the Black Fortress guarding the entrance to the fjord and therefore the port of the city. From this period a small pirate base on an island at the entrance of the fjord still remains. Of this period is also the museum ship now anchored near El Dorado Fortress. In 1860, with the emergence of larger vessels, it was decided to move the port to the north shore of the fjord, as this has deeper waters. Over the next 20 years, the transfer of goods between the two sides of the fjord (from the New Port to the Old Port) will be done in barges. Aware of the complications of this method (impossibility to make the crossing during storms, delays and its inherent danger), King Grunwald III instructs the engineer Gustave Studffeil the design and construction of a bridge to ease the crossing of the fjord. However, it must continue to allow the entry of vessels to it. Studffeil chooses the narrowest point of the fjord and designs a revolutionary piece for its time. He proposes an elevating bridge with two sections, controlled and managed from an tower set on an artificial island. This tower, in turn, complements Meinhard's lighthouse, built in 1765 at the entrance to the fjord. Despite receiving criticism and having his ideas laughed at, he begins construction of the bridge, which is finished in record time and inaugurated on 16 November 1886. To this day, the Bridge of Grunwald, as is known, remains in operation. During the decades of 1870-1890 many of the most emblematic buildings of the city are also built. Unfortunately, few of them remain, as bombings suffered by the city during Second World War , wiped out most of them. However, half a block remains almost intact near the Lion's Gate and the now abandoned (and according to many haunted) Grand Hotel opposite the apse of the Cathedral. During this period the village of Schneedorf, atop mount Weißen Berg is also erected. In 1898, Manfred II, Grunwald III's successor acquires the first steam locomotive and lays the first railways in the region. This locomotive is now located in the front yard of the Central Station. In 1905, seeing the potential of trains as transportation and cargo means, commands his engineers to build two workshops in the northern part of the New Port to serve for the manufacture and maintenance of locomotives. He also instructs the already old Studffeil the construction of a railway bridge over the fjord. From these workshops, on May 14th 1920, will roll the Emerald Night, iconic locomotive that even today still runs (only tourism purposes). By this time is also built the Central Railway Station, the first movie theater that is still preserved and the Municipality of the city. The Kingdom of Falkenstein will remain on the sidelines of the First World War. However, it cannot remain neutral during World War II. It will first be invaded by Germany and by the Soviets later. The King Carsten I will be deposed and imprisoned. Large sections of the city will be demolished by bombings (including almost all of the old walls and many large buildings constructed during the second half of the nineteenth century). However, by 1945, after waging a guerrilla war, the kingdom regains its independence. In memory of those unsung heroes today stands a monument in the Central Station Park. After the war and during the 50s the city was rebuilt. The wealthiest families choose to move to the outskirts of the old ruins of the Golden Castle. This area of the city is known as Goldorf. During the 60s the new Central Hospital and the Airport are constructed (the city formerly had only an airfield) and railways extended to link the different sectors of the city. The remains of the Old Port are also recycled and converted into a yacht club. Also, during this period, the first goals of the Space Program are achieved, when astronaut Neil Studstrong sets foot on the moon and pronounces his famous words "just a stud for minifgs, but a giant leap for minifigkind". This Space program continues till today, with permanent bases on the moon's surface. In 1990 and as part of the celebrations of Falkenstadt's Millennium a new railway station near the airport and the Otto von Falkenstein National Stadium are built. In 2010 a monorail line that connects the city center with the airport and Goldorf opens. At present, the Kingdom of Falkenstein, with its capital at Falkenstadt, has as form of government a constitutional monarchy. Its economy is based mostly on trade through its thriving port, agriculture and livestock. Another important source of income is provided by the always present tourist activity, given the rich history of the city. The Layout: Sector A: This is the Castle area of the layout. The idea is to have this table detachable, in order to play with this layout in a different time period. Sector B: Historical Port Sector C: New Port, cargo transfer and rail yard Sector D: Old port, recycled into Marina Sector E: Airport and Space Center Sector F: Stadium Sector G: Main city Sector H: Goldorf area Sector I: Rural area Sector J: Schneedorf Village Comments are greatly appreciated! Enjoy!
-
Hey everyone! I've finally decided to start my own thread, rather than piggy-back someone else's. Frankly, I need help with this: https://www.flickr.c...157643245649484 I'm trying my hand at remaking the classic 7760, with full PF components (lights too!) for a while now, but have hit a wall. The problem lies with the cab windows, and my current solution looks terrible in real bricks... So, I threw together an LDD moc up of what I currently have, and earnestly hope that you can provide me with something insightful! http://www.brickshel...ry.cgi?f=554681 Thanks in advance, ~M_slug357~
-
Hello, I am woking on plans for a Lego layout of the majority of the Magic Kingdom, in Walt Disney World Florida. I am planning on using the Philips Hue System for lighting so that I can have daytime/nighttime/morning/evening. I also am going to include LifeLites for the lighting of the street and in buildings. A few of the rides will be able to run as well, including the Walt Disney World Railroad which runs around the park. Lastly I am also going to include sounds into different areas of the park to add to the realism. Is there a program where I can make all these systems automated so that by the push of a button or two the entire layout comes to life?
-
Hello, This topic is devoted to my latest project, building the Magic Kingdom in Walt Disney World in Lego. Hello, For this project, I am planning to in some shape or form recreate the firework show "Wishes!" that is at the Magic Kingdom. I have been reviewing different ideas and brainstorming for the few weeks. I have seen some people do similar things and use a projection type of system, however in order for this to work everything must line up perfectly so that the show looks realistic. I have also seen a actual miniature recreate of "Fantasmic!" in Disneyland, however I am not sure if it is a good idea to light small fireowrks off around Lego, much less inside. Does anyone have any ideas on how I can recreate the show?
-
Fully automated Layout
World_Of_Brick_ posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, I am woking on plans for a Lego layout of the majority of the Magic Kingdom, in Walt Disney World Florida. I am planning on using the Philips Hue System for lighting so that I can have daytime/nighttime/morning/evening. I also am going to include LifeLites for the lighting of the street and in buildings. A few of the rides will be able to run as well, including the Walt Disney World Railroad which runs around the park. Lastly I am also going to include sounds into different areas of the park to add to the realism. Is there a program where I can make all these systems automated so that by the push of a button or two the entire layout comes to life? -
Hello, I wanted to upload my 15+ vehicles from the 1940's to today in a way that was quick and efficient, thus this thread is about getting the pictures out with side notes structured like this: (picture goes here) 19## yellow semi truck Built 20## Inspired by set ####, known as "Insert set name" LDD file: (if available) LDD missing parts / prints You are free to comment, but please note: the remaining 10 or so vehicles are (going to be) in another topic, because they are more Adventurer's / 1920's themed. I would also appreciate a mod indexing these MOCs in their respective topics. Also, please note these were taken by me and a family member with a cellphone camera, so please take that into consideration with the picture quality / cropping. I also only took one picture per vehicle. First up: 1950's Double deck bus - 7 wide Built 2014 Modified from Scotnick's UK Bridgemaster bus LDD file: http://www.mocpages....1420233991m.lxf LDD notes: Wrong wheels in the LDD file, but the ones in the picture are correct. 1960's Volkswagen Microbus Built 2012 Modified from a LEGO Rockband promotional build LDD file: http://www.mocpages....1416926983m.lxf LDD notes: LDD file missing rear view mirrors Money transport truck Built 2015 Built from set 76105 (Doc Ock's truck Heist) LDD file: http://www.mocpages....1411148366m.lxf LDD notes: There are some cosmetic changes from the LDD file to real life, but it's functionally the same. Classic Space themed car (Benny's ride) Built 2014 MOC model LDD file: http://www.mocpages....1408629670m.lxf LDD notes: his car has had one change to it since I took this picture! The wheel wells have been changed to the longer style because the short style does NOT exist. Sorry for any confusion on the matter. Also, the rear features the (printed!) classic space logo from Benny Spaceship, plus a license plate of your choice. 1950's Ford Anglia Built 2011 Inspired by set 4728 (Escape from Privet Drive) LDD file: http://www.mocpages.com/user_images/80135/1425155138m.lxf Nexus Force themed car (Bob's ride) Built 2014 Inspired by AdamtheLEGOfanrutland's LEGO City Undercover cars LDD file: http://www.mocpages.com/user_images/80135/1425153423m.lxf 1950's Fire Truck Built 2012 Built from set 9484, (Red's Water Rescue) LDD file: http://www.mocpages.com/user_images/80135/1416965118m.lxf LDD Notes: 1x1 round print missing from file. Plumbing Van Built 2014 Stock set B model 70811, (Flying Flusher) LDD file: http://www.mocpages....1420233794m.lxf 1950's Ice Cream truck Built 2014 Built from set 70804, from a MOD by Rick C. LDD file: http://www.mocpages....1416424243m.lxf Garbage truck Built 2014 stock set B model 70805, Trash Chomper LDD file: http://www.mocpages....1420233627m.lxf Police patrol car Built 2015 Almost stock model of set 70819, Bad Cop's Car Chase LDD file: http://www.mocpages....1420233428m.lxf 1950's Gasoline tanker Built 2012 Modified from set 10184, Town Plan LDD file: (none available) World War II American Jeep Built 2009 Inspired by set 6628, Peril in Peru LDD file: (none available) Modern Limo Built 2010 Inspired by set 3222, Helicopter and Limousine LDD file: (none available) 1980's Junk car Built 2012 Based off of set 9484, Red's Water Rescue LDD file: http://www.mocpages....1412897086m.lxf Bucket-lift truck Built 2010 Based off set 3179, Repair Truck LDD file: (none available) Front End loader Built 2009 Based off set 7630, Front-End loader LDD file: (none available) Dump truck Built 2010 Based off set 7789, Lotso's Dump Truck LDD file: (none available) Crane vehicle Built 2010 Based off set 7936, Level crossing LDD file: (none available) This concludes the post. I hope you enjoyed it, and comments are always welcome!
-
Hi all, I own some push-along trains, 4.5v trains, 12v trains and 9v trains and recently extended my collection with the 7938 power functions train. Unfortunately, I have had nothing but trouble with it so far. Things I ran into so far have been: - Unlike the manual claims, the power functions battery box does not work with rechargeable batteries, only with non-rechargeable batteries. The green light does not burn when switching on the battery box with rechargable batteries inside. I am using the same rechargeable batteries in other devices and they work fine there. So broken batteries are not the problem. - The (new alkaline) non-rechargeable batteries are drained within 10 minutes of running. The motor does get reasonably warm during that time but not exactly hot. Which means I'd have to spend a fortune on batteries to keep it running. - There is a large amount of wheel-spin all the time and the train makes a lot of noise when that happens. It just doesn't run as good as the old 9v system. I suspect both my battery box and motor are broken. The train is brand new and I have a lot of experience building Lego trains since decades and I am sure I have build the train correctly. I am not considering to buy the Lego rechargeable battery box 8878 as it is too expensive. I am running the train on the old style metal 9v tracks. What I have tried so far is call the Lego service line and explain the issues. They are very kind and helpful and will ship a new battery box. I doubt however if that would solve all the issues. Has anybody ran into these problems before? And any thoughts of what might be the issue?
-
Hi everyone. Here goes some photos of trains created with my Son :) Microtrain: Custom wagon for passengers (6 comfortable places) and theirs baggage. Combined with "Enlighten" train.
-
Hello everyone, i just unearthed some old 4.5 vilt trains from storage. Now I am not so sure what to build with them so could you please show some of your creations with 4.5 volt trains? One more thing is do 4.5 volt trains run on pf track as well as 4.5 volt track? Thx.
-
Hello, and thanks for reading! This is my current home layout, built over various iterations in the last year. I started with nothing but the desire of getting back into trains and into Lego. Given I had limited space, I settled for a 4 ftx6 ft rectangle, or roughy 7 x 5 32-stud baseplates. Here's the BlueBrick diagram: Layout in BlueBrick, on Flickr And here's the first version, with green felt over the raw wood panel: Initial layout Here's a view from above -- it was not easy to take this picture :) Layout full view Modulars on 'main street' are temporarily with their top floors removed so we can see the whole railroad. This is a view from the other side: Layout from the back I am able to run two trains concurrently, and keep a third one on a side line, which has been good for a while. Now I want to build more, and I am again kind of out of space.. ..problem is, in the meantime I also got somewhat addicted to modular buildings.. so it's a constant struggle to use space as best as possible. I eventually opted for a 'custom' road between two rows of buildings, which saved me some space. I also wanted to have a feeling of a small but vibrant town, pedestrian and bike friendly. No private cars. The little smart-like cars mimic the 'car2go' shared cars we have in Seattle. The tunnel helped creating some more space for buildings: Tunnel The other good thing about the current layout is that it leaves enough space for a decent station: Train Station - Stazione Still a WIP, once I'm more satisfied with the interior I'll add more pictures and a post for that. I think I will now look for a different 'iteration' and different layout.. suggestions? I could possibly expand the available space by one baseplate in either (but not both!) direction. I would like to accommodate 4 or 5 trains, and at this point I don't care anymore to run several of them at the same time. I just want to build and display more trains :) Lastly, thanks for all of you who participate in the forum and keep it alive. This is my first year "back" in lego and I learned a lot from all of you and your great creations. Keep on building!
-
Hey Everybody, I've just started building a semi-permanent layout upstairs at my house (i.e. not on the floor) and thought I would share. Comments, suggestions, etc. are welcome! This is just the start, I obviously have to move my modulars in, get more baseplates/roadplates, throw a couple more trains on the rails (metroliner, custom E7 set). I will also be adding a tunnel with mountain above for my WIP narrow gauge layout. More on the Tweetsie (shown here) layout and custom E7's in the future. I'm awaiting a few BrickLink orders for ballast, trees, scenery, so more to follow! BlueBrick plan: Full layout (with trains moved for clarity): Yard view (looking head on to the trains): Album with full-res here.
-
Hello eurobricks members and guests, I would like to know how to put lego train set gifs into your signature. Thx
-
Hello lego train enthusiasts, I finally got the Horizon Express. The reason is that I was born in france and the TGV is my favorite of all time so far and would like to know when it will be discontinued because on lego.com it says sold out. I also would like it if you could share some modifications that you put on your horizon express trains. Thx
-
Hi So Lone Ranger theme is already gone, for some sadly for some people not. Still, everyone interested has to notice that LR sets were very first Legos set in Widl West since... well... a rather long time... 1997 my loyal imaginary servant tells me, so, there You have it So let's discuss what this theme, both classic 1996-97 Wild West and 2013 Lone Ranger gave us, what great ideas we could find within them and what were/are the possibilities of expansion, of sets, of factions, of major gimmicks could new sets introduce. Well, basically, what would we like to see and play with if TLG was about to release a new Western-based line. So far we have a fort, a mine, indian village, a bit of a city, a covered wagon, LR brought a train ( finally! ) and a stagecoach ( finally! ). So I gues a train station would be a nice addition, well any kind of railway sets. Perhaps a river steam boat. I'd say that should consider splitting indians into TWO factions. It's clear that indiands from classic Wild West sets were somewhat neutral, or simply good guys, apparently there wasn't a single set that would include both Soldiers and Natives! I guess we all know the reason behind this decision. Still, they could get more from Indians by splitting them into traditional GOOD indian faction and... tada!... BAD indian faction, full time bad megablocks, scalphunters. On the other hand, Western doesn't produce as many set opportunities as Pirates and Castle did. It simply can't offer so many types of fortresses, ships, boats etc. Still, deserted "ghost" cities would be a good idea, some hideouts, lumberjacks, trappers, goldminers, caravans with settlers, a donkey/mule would be a great addition to Lego animals, not mentioning a bison of course! ( they did a prototype i've heard! ) Mexicans in their somberos and corrupted army could a nice addition. Perhaps the whole team could expand even farther, to mix a bit of colonial xix century feeling into it - Adventurers kind of thing, only set a little bit earlier, and without cars. Some great fictional sets can be found here: http://www.eurobrick...howtopic=15788 http://www.eurobricks.com/forum/index.php?showtopic=18994
-
This is my city layout that I presented for the first time at Bricktober - Perth 2014. I was the first time I was able to assemble the entire layout in one place and run a train around it. Hope you enjoy. IMG_0283 by Technic70s, on Flickr IMG_0330 by Technic70s, on Flickr IMG_0377 by Technic70s, on Flickr IMG_0367 by Technic70s, on Flickr IMG_0348 by Technic70s, on Flickr IMG_0332 by Technic70s, on Flickr IMG_0292 by Technic70s, on Flickr IMG_0272 by Technic70s, on Flickr DSC_9619 by Technic70s, on Flickr More Photos here https://www.flickr.c...57649480688125/
-
Hello, my dear friends of the LEGO world! It's a great pleasure to post my first MOC on Eurobricks! I always followed the news and researched MOC images of AFOLs from all over the world to inspire me on my works and now it's my turn to contribute to the hobby sharing my dreams. This MOC is a reproduction of a train station, which is part of a larger rail complex, located in the brazilian city of São João del Rei, in the state of Minas Gerais. The city is celebrating 300 years of foundation (1713-2013) and this was the way I found to honor this special place in my life. The São João del-Rei Train Station is the start point to one of the most famous passenger transport ride by steam train in Brazil, linking two beautiful historical and touristic cities of the country, São João del-Rei to Tiradentes, guaranteed itinerary of any tourist who wants to visit this region. In November, I hope I can expose this MOC in Expo LUG Brasil, our main LEGO event here in the country. Enjoy the pictures! São João del-Rei Train Station 1 por Adolfo LUG Brasil, no Flickr São João del-Rei Train Station 5 por Adolfo LUG Brasil, no Flickr São João del-Rei Train Station 8 por Adolfo LUG Brasil, no Flickr
-
Here are my American -style trains, in real bricks (NOTE: lots of pictures!:) ENGINES 2-6-0 Mogul #4613: Built 2014 2-10-4 Texas #6297: Built (as 2-8-4 Berkshire #6221) 2012, finished 2014 FA (diesel A-unit) #7996: built 2013 FB (diesel B-unit) #7996: built 2013 GG1 electric: Built 2012 TRAIN CARS (PASSENGER) Legoredo Limited - streamline combine: built 2011 (yes, it's missing a magnet, but I fixed it after this shot!) Legoredo Limited - streamline coaches: built 2011 Legoredo Limited - streamline observation: built 2011 999 Limited - heavyweight combine: Built 2012, finished 2014 999 Limited - heavyweight coaches: Built 2012, finished 2014 999 Limited - heavyweight observation: Built 2012, finished 2014 TRAIN CARS (FREIGHT) Generic Boxcars: Built 2011 Depressed Center flatcar: Built 2014 Drop-side Gondola: Built 2013 Water Tanker: Built 2013 Rock hopper: Built 2013 Branch-line Caboose: Built 2014 I have more, but they are a mix of UK & US trains, plus I have my streetcars. I am getting 4 more passenger cars (they are dark green vintage ones for engine #4613), plus a 2-6-2 steamer engine for Christmas. Railroad Buildings will be posted here, but the non-train buildings will be posted in the Town forum sometime.
-
Hi! This is the SBrick team. We currently are in the first week of a Kickstarter campaign to raise money for a device that replaces the IR remote with a next level remote control for LEGO. With SBrick, you LEGO Train enthusiasts, will be able to overcome the channel limitations from off-the-shelf LEGO PF IR Receiver. You can control up to 16 SBrick receivers from your smartphone, tablet or PC, which makes it perfect for large train layouts at home or your LUG events. You can use SBrick to control your trains (drive, lights and more) or to control other stuff from your train layout off the train, like track switch points, semaphores, etc. With SBrick you will never get lost again, trying to understand which remote is controlling which train. Control up to 16 trains (SBrick has 4 ports but can only go inside one train at once), or split between trains and of train devices. You can control: - N trains - (16-N)*4 layout devices (track switches and semaphores) Here is a train test video on our youtube channel: Read more and Support us @ kickstarter!
-
Hey guys! Sorry if it seems like I'm botting all the forums for Lego Ideas votes. I'm just using Lego Ideas to host my image sources, so it usually coincides with one of my Lego Ideas projects. Right now, I just completed work on the Polar Express- a 1/78 scale model of a Pere Marquette 1225 2-8-4 Berkshire steam locomotive. It has a coal shunter, 4 passenger cars, and a caboose. Right now the locomotive is painted mainly black with stone grey accents, and the cars are painted black, navy blue, and classic red. If I built it in real life right now, it'd have a astonishing length of about 5 feet/1.6 meters, and only contain 1,697 pieces. This is mainly due to the fact that it's built using 6X34 train plates and 1X16 beams for the base below the car interior. Every single car is built with a modular roof that can be detached for playability inside the train, and the same goes for the actual locomotive. It's capable of holding 42 passengers, if you don't include the chefs and conductor who'll be standing and traveling between the cars. Here are some pictures of the train: The front view of the whole train: The view of the back of the caboose and observation area: View of one of the cars: View of the Entire Train: Whats funny is it's literally so large I couldn't photograph it any larger without displaying the whole screen and UI around it. Cross Section of a Train Car With Adjustable seats: Rear View of a Train Car: Mid View of the Train from Behind: Anyways, I hope I could receive some feedback on this. It's my first actual try at a Lego Train, so there are obviously some areas where I can improve. Also, when the project is approved within the week, it's called The Polar Express on Lego Ideas, and it'll be posted by my account there, LegoGuyLOL4Ever. If anyone is interested, I'm also attaching a copy of the Lego Digital Designer file to this. If you try to build it IRL, it might be expensive due to the amount of Navy Blue. polar express 2.0 copy.lxf
-
Hi everyone, I've been lurking around reading these forums for a while, gathering inspiration, copying a few of the ideas for 90-degree and single-crossover designs etc. I finally took the plunge with trying the create a double crossover, one which doesn't cost £80 on ebay, and which allows fully flexible route setting. The base parts are 4x points and 4x curves, and while the result is geometry compatible it takes up 3 track widths, and will give any purists (those who object to hackwaws and superglue) kittens - or possibly full grown cats, it's pretty extreme. To be fair, I was also a purist until I got into trains and decided that the number of different types of track piece just didn't cut it. I present the results in images, one included, a couple more detail shots at: http://www.sealhaven.force9.co.uk/ Questions & comments welcome.
-
Hello all! New here to Eurobricks and the whole AFOL Trains community in general. I have noticed that there there are essentially two different train systems the 9v (runs on metal rails using a DC current from a transformer like a normal model railroad) and then Power Functions. I unfortunately don't have any of either to experiment with but I was just thinking would it be possible to merge the two and create a kind of DCC system? (Digital Command Control - current standard for powering and controlling model railroads) What I mean is this, you have the PF system that uses a battery pack, IR or RF receiver to power either a "train motor" or another motor that uses Technick gears etc, to power the wheels. Could not one remove the actual motor from the 9v train motor housing and use the metal wheels as contacts to pass the current through from the metal track to your PF control system? This way you would not have to break your layout into Power Districts and you would be able to run multiple trains on the same line under completely different control. Each train would be controlled by it's unique PF controller yet pulling the same current from the rails. Essentially moving the battery pack from a pack of batteries in the locomotive or tender and placing it in the rails where you no longer have to worry about charging or bringing extra batteries. I haven't been around long enough to see of you guys are doing this yet or not, but just thought I'd throw it out there. As I stated, I unfortunately don't have either system (or trains) to experiment with but will as soon as I have the coin. I recently downloaded LDD and built an MOC that I designed to run in either system or both. I've always been an FOL and trains but never have been able to bring the two together until I downloaded LDD. Let me know what you think of combining both 9v and PF and I'd love some feedback on my MOC in the link below. I went for detail so it turned out to be about to scale so wider and I'm sure taller than the standard size, though still on the Lego standard gauge track. Cheers! https://www.flickr.com/photos/128636628@N08/
