Search the Community
Showing results for tags 'shuttle'.
Found 49 results
-
Medical Corps by Veynom, on Flickr The Medical Corps is a military unit providing medical services too all army personnel, in war and peace. The Medical corps services were formed during the Clone Wars and incorporated to the Grand Army of the Republic. The decision to create such unit was taken by the Senate of the Republic as the war started to prolongate and to expand onto a growing number of planets through the Galaxy. A majority of senators acted that then that it would be less expensive and faster to attempt “fixing battle-damaged clones” than growing more. However, and still for budgetary reasons, the future Medical Corps would be granted only second-grade equipment: modified outdated ships and speeders, old droids and equipment… Still, the Medical Corps was voted in and assigned with the task of identifying, evacuating, healing clones wounded on the various battlefields before sending them back to active duty. With the rise of the Empire, the Medical Corps was simply renamed into Imperial Medical Corps. Equipment were barely upgraded on a strict necessity basis and the overall budget did not really increase. Classified documents from the Commission for the Preservation of the New Order (COMPNOR) later revealed that showing wounded troops and casualties had to be considered as negative propaganda that could only serve any rebellion movement. Therefore appearance, size, and image of the medical care activities should keep a low-visibility profile. Armor and Gear Medical Platoon by Veynom, on Flickr Medical Corps members were first clones and as such had standard clone armors retrieved from the Grand Army surplus. Only a specific medical marking pattern based on dark red was applied to distinguish them from regular combat units. Because of the budget restrictions, not all armors were similar across the unit. HowTo: Helmets are from Clone Army customs. All minifig torsos, arms, legs and accessories have custom decals (water transfer). 614-AvA Speeder Bike Medic-Variant 614-AvA Speeder Bike Medic-Variant by Veynom, on Flickr Several types of speeder bikes, including 614-AvA types, were used by the Medical Corps after an adequate painting job was performed to add the medical logo and standardize markings. Several container crates were also generously lent to the Medical Corps. Rumours from the field report that often, speeders, crates, and other equipment were simply recycled from various battlefields and repaired for active duty inside the Medical Corps HowTo: The speeder bike is a MOD from the 75090 set while the crate is a recolouring of the 75141 crate. The crate can be attached to the speeder. The medical logo is a custom decal (water transfer) Medivac Platoon in action by Veynom, on Flickr QH-6 LAVr Medilance QH-6 LAVr Medilance by Veynom, on Flickr The LAVr QH-6 chariot is a multi-functional speeder universally exploited by various ground forces as a light transport vehicle. The Medilance variant has been adapted to medical care and can carry one stretcher. QH-6 LAVr Medilance by Veynom, on Flickr HowTo: MOC with custom decals inspired by the old LL-924 design. The root can be opened to add or remove the pilot. Several accessories can be moved inside to simulate medical activities. The stretcher easily slide in and out. Medivac Speeders by Veynom, on Flickr Sheathipede-class Medivac Shuttle Sheathipede-class Medivac Shuttle by Veynom, on Flickr Several old separatist Sheathipede shuttles were retrofitted into medivac shuttles. These could carry up to two wounded troopers on stretchers, a droid (often a EG-6 Power droid to power medical devices), and the pilot. Medivac Sheathipede back by Veynom, on Flickr Medivac Sheathipede top by Veynom, on Flickr HowTo: MOD based on the 75170 Phantom set. 8 studs longer, with custom decals (water transfer), additional details and greeble, detailed interior and place for a custom power droid. Medical Corps by Veynom, on Flickr All vehicles have playable features (opening compartments, rotating devices…). They are all highly swooshable and quite sturdy. So, what is your favourite element of this Medical Corps ? · The custom medic minifigs · The Speeder bike · The Medilance speeder · The Sheatipede Medivac shuttle · Gonky, the power droid I’m now considering building a capital ship for the Medical Corps. Maybe a Pelta-class or something more exotic. Ideas welcome …. Size matters not. Comments, remarks and constructive criticisms are most welcome.
-
The Platipus Class Imperial Shuttle never saw extensive service. It was designed to be slightly smaller than the Tydirium Class with heavy missile armament, but its dependency on supply lines quickly got the project cancelled after a handful of them saw limited action against pirate raiders. The foot soldiers liked it because it was a mix between a Tank Buster and a Transport vehicle ( MI-24 Hind wink wink ) I wanted to design something that had the marks of a Star Wars craft with added shapes inspired by real life animals (Platipus) and aquatic insects (Water beetle) with a Tie Advanced jammed in there :D The craft has no internals. It is just for display. Feedback is welcome
-
Hello guys, I have finished now the Imperial Shuttle I started already a while ago: Now all of the functions actually work, and the details of the ship have been finished so that everything should look as smooth as possible. The work was pretty hard balance between accurate looks, working functions and durability, and I am now quite happy with the result. ^^ Here is a video showing the functions that include: - 2 x lasercannons - 2 x missiles - Backcannon All of the cannons are launched by pressing different buttons at the bottom of the ship. The mechanisms behind this are rather complicated and they are based on the use of fishing wire that delivers the force to the right place. - Wings automatically turn the landing gear open and close. Also, the white covering plates of the landing gear open and close automatically. The wingcannons also turn up and down automatically, though on the video they are a little jammed. - Boarding ramp and an opening and accessible hatch. - Removable walls, wall and cockpit canopy. - Cockpit seats 4 minifigures, the interior has 2 seats, but can accomodate a platoon of up to 8+ minifigures or even more, if you don't care about comfort. - Samppu
-
Greetings everyone! After a couple of months work I am proud to present my minifigure scale Zeta-class cargo shuttle. “Manufactured by Telgorn Corporation with Sienar Fleet Systems, the Zeta-class shuttle carries a modular ‘interstellar orange’ cargo pod for versatility mounted on a 35.5m length frame.” Ever since Rogue One introduced the design, the industrial mining tug aesthetic appealed to me. It has the kit-bashed sensibility that I love in Star Wars, so I set about a UCS sized build. The lower cargo deck has space for troops and features a communications patch bay. I’m still working on finishing touches to the upper deck, but it houses the two seat command console and aft tech station. The gearing mechanism from 10212 locks the wings upright. By simply lifting the top deck away I can adjust the angle if required. The wingspan measures 1.15m, so I have yet to find space to photograph the wings in flight mode! During construction I used LDD for rapid prototyping. I still need to update the final build into the program, but the current ballpark is 4000 pieces. The Rogue One ultimate visual guide and Battlefront Scarif DLC were invaluable for determining the proportions. My personal technique for ‘minifigure scale’ is to calculate in-universe size against stud length. Small craft like speeders and skimmers skew towards 4.0s/m, starfighters 3.5s/m and large craft (e.g. UCS Slave 1 and Lambda shuttle) at 2.7s/m. Therefore I aimed for 92s long and 75s high. The final model measures 88s (l) 70s (h) 48s (w) / 70cm (l) 56cm (h) 38cm (w). Finally I threw together a Scarif landing pad for a diorama. Hope you all like it! (Link to the flickr album is here.)
-
Hello everyone ! I think it's no surprise that i am pumped to see Rogue One TONIGHT ! I've been waiting for the movie since it was announced, and a specific group of people have caught my atenttion ever since day 1: the Death Squad, i just love the idea, looks, and function of Krennic's special team, and Krennic himself, and it has grown after reading Catalyist. I am a sucker for SW's shuttles, unfortunally most of the TLG's sets and MOC's are huuuge since they are in minifig scale (or close to it) and i don´t have the space to display them, i still wanted to make Krennic's shuttle since i am in love with the ship so i thought "Why not do it in a mini-midi scale ?" and that's what i did. Now i could be wrong of this being on the mini scale, but to be honest i don't know in which scale this fits I gotta say that it was hard to recreate this ship in this scale (specially since i wanted to keep the wing folding, landing gears and ramp in the final model) and while not perfect i am really happy with the result since i think i re-created it fairly well. This Shuttle has some interesting and sharp angles that were definetly a challenge while building it, but i think it came out looking quite well,,, atleast it's recognizable Moving to the back, i had no idea of how i was going to do the enginee of the ship, it finally ocured to me to use clips and grilled tiles to get the look of the enginee, the rest was pretty simple to do so i'm not gonna get into it lol i am very happy that i was able to pull of this mode, you can't see it very well here but the model is sitting on it's landing gears along with the retractible boarding ramp, this wing-folding function was very difficult to re-create due to the size i decided to build the model on, as a consecuence of this the wings're waaaat thicker than i'd like to, but what are you gonna do.... I am still pleased wih the result. And that's pretty much it, thank you guys so much for taking the time to read this, i really hope you like this little thing, i am very happy to anounce that the instructions (this means the PDF & LDD files) will be up by Friday for free !! they will be posted here so keep an eye out for that May the force be with you ! -Prime
-
Finally got my Kylo Ren command shuttle converted to all black with red viewing port and folding wings. I think it turned out decent and is still very playable and swooshable! Started on it last January, but became addicted to Star Wars Battlefront for way too long after getting a PS4 at Christmas. Anyway with the recent release of Krennic's shuttle in mostly all black, I got inspired to pick up the black pieces from many Bricklink orders and finish my conversion of Kylo Ren's shuttle. I wish I could have gotten the red viewing port "fangs" to transition a little better into the top portion, but it still looks pretty good from a distance. Removing all the cross linked technic beams opened up a lot of room in the interior. I added two sets of the technic rotation joint disks to each wing and now they have three clickable positions for folding up and down. 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command ShuttleIMG_4497 MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr 75104 Kylo Ren Command Shuttle MOD by Shawn Minkey, on Flickr Command Shuttles Comparison by Shawn Minkey, on Flickr Command Shuttles Comparison by Shawn Minkey, on Flickr
-
Hey guys. I thought I would post a video of my Airport. I "think" I am finally done messing with it for a while. It now has a general aviation area, a much larger main terminal, a rebuilt tower, a seaport and many other improvements. I also wanted to incorporate the new airplane sets that came out this year. So here it is. Hope you like the airport. Next project is finding a place for the modular coming out in Jan!
-
Bricklinking the Lambda-Class Imperial Shuttle 10212
Spud The Viking posted a topic in LEGO Star Wars
I have decided to build the, what is in my opinion, best ship in Star Wars: the classic and sleek imperial shuttle. From making a wanted list and ticking off what I actually have, is there any other advice you guys can pass on to me? It is a bit daunting but I have amassed about 25% of the total parts and just thinking of that beauty pushes me on. Thanks. -
I'm new here som I hope I get this right When kylo Ren is away... RC Imperial shuttle by Andreas Lenander, on Flickr RC AT-ST by Andreas Lenander, on Flickr
-
Hi all, I wanted to present this MOC that I built originally for the Evolved contest on FBTB but due to various circumstances, I could not complete it on time. Anyway, I thought it was a brilliant contest idea and therefore I decided to complete my MOC eventually. The most important aspect of a MOC contest is not winning. It is not even participating, but it is definitively building one's own creations. :D Therefore, please let me present you my Sheathipede-class transport shuttle Evolved. Thirty years after the fall of Palpatine, the First Order is running at full speed its rearmament program. In order to be able to quickly ship troops to all corners of the known and unknown galaxy, the First Order looks toward reliable, effective, multi-purpose transport ships providing a flexible and large freight capacity. Some of the First Orders engineers decided to base their design on an old separatist shuttle dating from the Clone Wars: the Sheathipede. And they made it evolve... Sheathipede-class transport shuttle Evolved by Veynom, on Flickr For the very first tests, Captain Phasma is around. Sheathipede-class transport shuttle Evolved by Veynom, on Flickr A bulky rear side which offers a large loading ramp. (Who said "a big a.."?) Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Troops can be landed and quickly get out of the ship. Sheathipede-class transport shuttle Evolved by Veynom, on Flickr I am currently also building several cargo modules that will fit inside and maximise both the playability and flexibility of this ship. Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Inspection ... Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr Sheathipede-class transport shuttle Evolved by Veynom, on Flickr This MOC is quite sturdy but is hard to carry, just by its shape and size. Comments are welcome.
-
Yes, ANOTHER thread with MOD´s of the Imperial Shuttle and First Order TIE. :) Well I thought I´d share these anyway. The Imperial shuttle is one of my favourite vehicles of the OT, so what started with a couple of tiles ended up with a couple of Bricklink orders. The wings are made in the same way as the top fin (and UCS wings). Bricks and Technic beams. The end result turned out very nice. The cockpit needed to be thinner when made out of all white parts. The designers of 75094 and 10212 used gray in a very clever way to make the cockpit look thin yet still hold figs. In my flickr there is a before and after photo of the cockpit during the mod. There is no room for a copilot anymore but the troop area remained unchanged. Alot of tweaks and rebuilds later I feel finished. There is room for improvement but at the moment i´m satisfied. b] shuttle01 by mordatre, on Flickr shuttle03 by mordatre, on Flickr shuttle04 by mordatre, on Flickr shuttle08 by mordatre, on Flickr And now the First Order Special Forces TIE Fighter 75101. Main differences are the now white wings and the inner spokes on the wings. The inner spokes are, as you know a problem since the first TIE Fighter released. I am satisfied with the solution I came up with using technic connectors and axles. I tried using longer axles but then they bent outwards because of the plates, so I used the shorter ones for a sleeker look. The top cannon got rebuilt to look more like the one on Hasbro´s model. I also extended the main body so the model is two studs wider than the official set. FOSpecialForcesTIE01 by mordatre, on Flickr FOSpecialForcesTIE02 by mordatre, on Flickr FOSpecialForcesTIE04 by mordatre, on Flickr There is already a great version of the standard FO TIE in this forum by user belkor. He inspired me to make my own. I based mine on 75101. I´m currently awaiting parts to incorporate the spokes on the inside of the wings as I did on my Special Forces TIE. Other than that this one is also two studs wider. FirstorderTIEfighter02 by mordatre, on Flickr FirstorderTIEfighter04 by mordatre, on Flickr FirstorderTIEfighter03 by mordatre, on Flickr
-
Location: E11 - The Fascini Cluster Tags: Vehicle, Spaceship, Land Vehicle, Exploration, Civil --Weekly Explorer's Transmission-- --Log of Eagle-Eye Silver-- --12 Oktobrinali 3815-- After Kawashita spent some time mining Sector E11, a treaty was struck to share the awesomnium-rich asteroid field between Kawashita and Octan Corp. The sharing agreement gives Octan Corp. the opportunity to acquire the precious resource. I’ve been piloting an OT-14 Zelus dropship-style shuttle this past week making cargo runs between the large asteroids in the Fascini Cluster. It’s fairly menial work, confirming a different manifest a few times a day and running between asteroid and fleet endlessly. At least the Zelus is nimble and quick. The four Pegasus TFG thrusters are controlled independently by the flight control computer and that vectoring makes for impressive maneuverability for landing and docking as well as at high speed. There’re even rumors of Octan SpecOps modifying some of these shuttles for their use, and of course painting them black. After piloting this thing for a week, I can certainly see the appeal. --End-- I really need to build more in the week! More pics tomorrow-ish, I need some sleep...
-
Hi All, Back in february I started to work with LEGO trains again, after many years. One thing I wanted, was to see if I could make a train wagon to transport the Shuttles (set 10231) orange tank! I don't have any Maersk trains or anything like it, but anyway, the build started. So, after some trials and errors, I ended up with this design: IMG_0502 by Marook, on Flickr It's basically two ends with a long rod inbetween, normally seen on some huge trucks with special transport (like windmill parts etc..) The end looks like this, up close: IMG_0503 by Marook, on Flickr And here is the middle facing side: IMG_0504 by Marook, on Flickr Loaded, it looks like this: IMG_0505 by Marook, on Flickr IMG_0507 by Marook, on Flickr As far as I could meassure, it's 47 studs long without the tank loaded. I still need something to fix the tank during transport, but it's actually quite stable, and runs LEGO curves fine.. Hope you like it..
-
Figured I wanted to make somethin' like a Sentinel-class Shuttle to carry all the shiny stormtroopers I got for Christmas, but since 1. I don't have the correct color or shape of colors to make a perfect Sentinel and 2. I also wanted my shuttle to carry AT-STs, I decided to go my own way with this. So, here is construction log one: As you can see, I have a tidy little gearbox that the wings are attatched to. Here's the crank that operates it (I'll turn it in to something prettier later.) And here's with the wings folded down. That's it for today! Come back tomorrow for more!
-
Hi everybody! I'd like to show you my latest mini-moc. It try to represent the Space Shuttle in its most exiting moment: the launch to the space. Hope you like it: Other pictures: http://www.mocpages.com/moc.php/405011 Ideas: https://ideas.lego.com/projects/92515 Any comment or suggestion is welcome! Bye Teazza
-
1. Set 1701: Galileo 7 Exploration by [DustyBricks], on Flickr 5. Door Opening by [DustyBricks], on Flickr 6. Tricorder readings, Dr. Mccoy? by [DustyBricks], on Flickr 7. Back by [DustyBricks], on Flickr 9. Controls by [DustyBricks], on Flickr Hello all, this Galileo 7 shuttlecraft from the original Star Trek series is my latest creation. Once again, I tried to build it like a Lego set with as many play features as possible. This build depicts the shuttlecraft Galileo 7 landing on Taurus II only to meet a large, stone/spear throwing anthropoid on the planet surface, as in the original episode "Galileo Seven". So, yeah, I'm in a very Star trek mood... Anyway, Enjoy! Video with all of the play features: https://flic.kr/p/qmVBVY
-
The Imperial Base located in...I don´t know where...in a frozen planet in an uncharted system where the Imperial troops try to secure new energy sources and raw materials for sustaining the military effort. Although the basis of the troops are snowtroopers (109), there is a small platoon of the Special Operations Unit. This unit has many tasks, and one of them is to complement the reconaissance work of some of the drones. And these drones sometimes find a valuable prey. As soon as the location of the prey is known, a squad is send to get the pray because the Base Commander wants to arrange a BBQ. However, they don´t always arrive on time and nothing but bones is what they find. Oh! A wampa! This is rather a dangerous enemy! And the troops open fire, of course, in self defense. But a wounded wampa is a very dangerous creature, and more if it is at point blank. And the result is a stormtrooper with a leg amputated. Fortunately, the attack was reported and the evacuation APD was sent. The Base hospital was calmed. The medical officer was checking his IMPBOOK profile. The APD landed and two off-duty snowies were sent with a stretcher to help in the movement to the operating room. One of his fellows takes his leg before the injured stomtrooper gets inside. Quickly!!! The medical droid, also known as "You´d rather not meet me" is ready and starts the work. Wow! The leg is in place! It is so fast that the stormtrooper runs away. His fellow and the doctor are impressed. Have two additional pics of the Hospital. Enjoy! You can check it on mocpages, http://www.mocpages.com/moc.php/393662
-
Recently I've been working on modding a 7166-1 Imperial shuttle, and I decided that I should make a new cockpit. The current one is a little unfaithful, so I took a crack at it. The cockpit should be quite small and thin, which I tried to encompass in my new cockpit. Any suggestions and comments are welcome. If anyone wants, here is the current LFX file:Imperial shuttle mods 2.lxf One problem is there will probably not be room for any figs, but it would look better. The underside. Still no floor.
-
Sienar Fleet Systems T-4a Lambda-Class Imperial Shuttle
rx79gez8gundam posted a topic in LEGO Star Wars
This is my movie-accurate Lambda-Class Imperial Shuttle, designed from pictures of the movie model, set photos of the full-scale mockup used for filming, and the book Star Wars Complete Cross Sections. It is highly detailed inside and out, with a full interior with space for 6 minifigures in the cockpit and a further 18 in the cargo/passenger compartment and a detailed drive section. The wings are fully positionable, as is the boarding ramp, wing cannons, and fully retracting landing gear. The MOC borrowed the basic head design from the UCS model but is 1.5 times larger and much more faithful to the source material. This MOC took a week to build, with particular challenges in the wing fold mechanism and landing gear. Would love to hear feedback! http://mocpages.com/moc.php/380384 -
The border between the prosperous Galactic core and the more lawless Rim is loosely defined, but most legitimate traders use the American colony world of New Washington as the unofficial border. The spaceport is clean and and well kept and the bribes are low. Many different classes and types of ships, on either side of the law, pass through New Washington, including Hangar B-51. Below are some of the security-cortex images. [[OOC: I was a little bored of taking photos of ships on a blank background, and wanted to test out creating a backdrop with some character to it. Below are the results. Click on the images to get to more pictures and details of the ships involved.]] The Keepsake-class Fighter by TenorPenny, on Flickr The N-V-class Enforcer by TenorPenny, on Flickr Hangar 27 by TenorPenny, on Flickr Hangar 27 by TenorPenny, on Flickr Hangar 27 by TenorPenny, on Flickr The Gen-7 CIV by TenorPenny, on Flickr
-
Swiftsure-class Diplomatic Shuttle by TenorPenny, on Flickr Swiftsure-class Diplomatic Shuttle by TenorPenny, on Flickr Swiftsure-class Diplomatic Shuttle by TenorPenny, on Flickr Decked out white, the universal colour of peace and neutrality, the Swiftsure is used in times of war by the great Solar Navies to ferry important diplomats and personnel from place to place, with all organised military forces having agreed to never attack such a shuttle, on pain of court martial. Two ion engines make the shuttle as quick as it's namesake, whilst the roomy interior has room for a head of state and their entire retinue to travel in comfort and style. The Swiftsure's reputation has been tarnished just once, when the Italian Fascist League stole one, loaded it with explosives and managed to get close enough to the Earth defensive net to destroy half of the New Washington solar platform, with significant loss of life. Ever since, the Swiftsure computer cores have been upgraded to carry layers and layers of code, in order to confirm and double confirm identifies of the crew and people on board. Crew: 2 pilots, 1 comm-tech. Engines: 2 Rolls Royce 'Whirlwind' Nacelles. Weapons: *PROHIBITED* Computer Core: Hakumi Positronics X7
-
AS-27 Escort Shuttle by skapunkplaything, on Flickr AS-27 Escort Shuttle by skapunkplaything, on Flickr AS-27 Escort Shuttle by skapunkplaything, on Flickr The '27 was first commissioned for the wealthy gas traders of Saturn at the turn of the century, but has seen widespread use in a number of areas since. These traders were highly prized targets of kidnappers and pirates throughout the Sol System and beyond, and soon realised that if they failed to travel well armed, they might as well not travel at all. In that vein, the '27 was designed and put into production by the military arm of Lockheed-Franklin. With a thick, duranium armoured hide and three (one heavy dorsal, two underslung medium) plasma cannons, it was at first deemed too well armed for civilian use. A couple of bribes later, and the AS-27 was rolled out and bought in droves by wealthy VIPs, traders, governments and NGOs. It has since, of course, made it's way into more unscrupulous hands and has been used as a boarding craft, gunship and loot-boat. Length: 39m Crew: 2. Passengers: 25, or 12 armoured marines. Armament: 1 x Heavy Plasma Cannon (dorsal). 2 x Medium Plasma turrets. Computer: MS2700H (under licence)
-
Just thought I'd show you guys one of my newest little MOCs: a Transit shuttle. This shuttle has multiple uses in various cities/towns across the world. Most popular include transit and airport services. It also is one of my first MOCs to be completely pre-designed using LDD. Here's a YT video showing some features.
-
I recently stumbled on the work of Master Beef (with fries) on flickr, and his work is very impressive. Take for example his Lambda-class shuttle: Somehow he manages to interrupt the smoothness and appears to have altered some of the angles of the ‘real’ vehicle — and yet the model is unmistakeable, it looks very Star Wars-ish, and it looks refined, done with seemingly tacked-on shapes but with purpose, like good greebling. Plus there’s some very nice shaping in there. And don’t miss his other Star Wars MOCs, like his Y-wing and his 74-Z:
.thumb.JPG.1493565333fc74a41021a3de1870838e.JPG)
