Search the Community
Showing results for tags 'Star wars'.
Found 1299 results
-
Hi, since I'm relatively new here, I figured I'd post some of the stuff I've been doing during COVID lockdown (mostly Star Wars related). I don't mean to spam this forum, so I figured I'd create only a few new threads over the next days where I collect some of my designs thematically, starting with this one. I've recently started to get into Neo Classic Space. I wanted to design the sets I would have craved as a kid. The results are these Star Wars / Classic Space mesh-ups. Instructions to all of them are up on Rebrickable: https://rebrickable.com/mocs/?tag=15887&include_accessory=on&include_bmodel=on&include_subset=on PS.: If you dig Classic Space, please consider supporting my NEO GALAXY EXPLORER over on the Lego Ideas Platform. I have opened a separate thread for it over here: Galaxy Starfighter X Galaxy Starfighter A Galaxy Starfighter Y Twin Engine Laser Craft Polaris I Speeder BOW Starfighter Ice Dune Speeder All Terrain Magnetizer
-
So, this is my mod based on the pictures from @Kozikyo86 I have to say that the mods to this set were easy to make and as always the only difficulty was parts. I had to take apart a good number of sets, mainly for smooth tiles. However, In my opinion it was totally worth it. First off, the head, Here i just added some parts to smooth out the jaw and the front end. I also replaced the black window with red, I am not sure why Lego went with black, red looks much more menacing for a robot dog. I also changed the canopy and increased the size as per the mod. Next, the legs, again this follows the moc, this was just a case of adding smooth tile pieces and added a few extra parts to the top of the leg to create a more bulky outline. In addition i added a few plates on the inside of the legs, to bring the depth closer to the technic beams. I tried to bring these totally level but it looked too bulky. I also tried making using 2 stud wide smooth tiles to totally cover the legs, again, this looked too bulky. Next up, the sides of the AT AT. This was an area where plates were in short supply so I had to use what I could find. I followed as closely as I could and made sure that any studs showing looked like they were purposfully placed. I still think the panel over the front leg needs adjusting slightly. I also added some small pieces on the leg joints. These look great from a distance and are easy to remove, i think they add a little extra interest. Bottoms of the legs, I added some smooth quarter pieces on top of the round circles. I also increased the height of these by one extra plate. On the (real) thing these parts are really high. I also echoed some of the detail on the outide of the legs onto the inside sections. All in all, I am very happy with the final result and I think it looks great on display with my other star wars stuff.
-
Here is my TIE-Droid (or TIE/D automated fighter) MOD, based on set 75300. TIE/D automated fighter by Veynom, on Flickr In the Star Wars expanded universe (Legends), the TIE Droid is a cheap automated fighter developed by the Empire in the Dark Empire comics. TIE/D automated fighter by Veynom, on Flickr When the 2021 version of the TIE-Fighter was released, I was first a bit disappointed because it was no more matching in size my large collection of TIE variants. But then I considered the TIE-Droid, which I imagine to have a slightly smaller cockpit ball. As I had a few of these 2x6 modified plates with studs on the side, I started building the TIE-Droid variant. TIE/D automated fighter by Veynom, on Flickr The resulting model is sturdy, swooshable and playable (as I kept the opening cockpit feature). The wings connections are solid but still easy to assemble and remove. TIE/D automated fighter by Veynom, on Flickr A small build but worth sharing as it allows us to complete our collection of TIE variants. TIE/D automated fighter by Veynom, on Flickr Free instructions for my TIE-Droid mod are available on rebrickable. Click, download, build, enjoy, and share your completed model back! Comments welcome.
-
Hello everyone, finally after almost 10 months I can present my new MOC. This time I decided to make a risky choice and wanted to recreate a "mighty and bad" vehicle that when I saw Episode IX immediately reminded me of a snowmobile. I spent a lot of time designing the two troopers. I wanted to recreate the right anatomy and I wanted to capture the right details. Little is seen in the film but this too is a medium that deserved a UCS version. To give you an idea, the "Driver Trooper" helmet is made up of 137 bricks and the "Jet Trooper" helmet is made up of 141 bricks. Here are some info on the MOC: - 5956 bricks and 2 minifigs - lenght 80,0 cm - width 25,2 cm - height 35,2 cm Here is a small presentation teaser I really hope you like it!
-
Every couple years I come back to see what’s going on these days in the world of Lego, something that I’ve noticed is the lack of decent sets these days. for an example, 2005(6) and 2008 saw two big sets being the Turbo Tank and MTT and Sand Crawler, these many years later were re-released as these tiny compact sets that cost just as much. In fact, it’s not with just larger sets, it’s with the medium sized sets as well like the AAT for example. Maybe I’m just cynical? It feels like back in the 2000s there were some really special things that Lego produced, such as the glow up lightsabers, and I feel bad for the group of kids growing up on this line of productions. There’s something about Lego Star Wars that has gotten worse, maybe it’s the overly compact scale downs of sets, however, it’s just very rare these days that even while looking through videos, do I see anything that compares to the days over a decade ago.
-
*Your entry has earned 6 XP* Far from Naboo and Lemrik, ground of a jungle planet called Devaron is patroled by troopers, fighters and walkers. One of those patrols found an old wrecked interceptor, once belonging to a jedi padawan who crashlanded here during order 66. -------------- A small entry for the ltc.
-
A signal of a scout was lost near a native village. When invetigators got there, the driver was already dead. As of right now, It is still unknown weather this was a crime against the Pentastar Alignment. Report of TK-3465. Instagram: https://www.instagram.com/vytilo/
-
*Your entry has earned 60 XP* Our missions on Ambria and Dathomir were a bit too exciting for my liking, although they had earned me a promotion and a trust very valuable to me. Our next mission would be to secure the moon of Endor, where that fateful battle, in which we lost so many, was fought. It was about time we had our revenge, and as the NR rangers suspect shady business going on throughout the galaxy, the core is conveniently in denial of our ever-growing presence. We must be patient. Our time will come. The time when we have amassed enough resources to complete our ultimate mission. The final mission… As DT-R65 walks out of the lambda class shuttle, the moist air condenses on his visors, bringing him back to when he first fought here. The objective? Acquire weapons stored since before the first battle of Endor and advise the mobilization of troops to exterminate the local fauna. It seems smugglers and bounty hunter scum had already claimed the weapons cache, and were now selling weapons to both NR and Triumvirate forces. A reminder of the accelerating chaos growing in the galaxy with the New republic regime… Lieutenant Conwick, operating number ISB-098, is in charge of one of the platoons stationed here. As we make our way towards the received coordinates fallen troopers lay scattered, impaled and beaten. Helmets pierced by pikes decorate this savage combat zone. The fauna was more intelligent than anticipated, and was quick to adapt. We do however have one advantage; brute force. Conwick approaches on an AT-RT. Haven’t seen one of those in ages… In front of him stands the presumed weapons dealer, a Duros. A Pyke stands beside him, a bounty hunter by the looks of him, no doubt connected to the syndicate. They wear imperial armor, a mockery of the uniform… Their pit droids drop off the crate filled with high standard mandalorian weapons. They will serve the empire most effectively… Lieutenant Conwick -Commander Kurath, We are honored by your presence. Cdr Kurath (DT-R65) -I see your efforts here have yet to be proven… Your platoon has taken some losses. Lieutenant Conwick With all your experience in special operations, we will wipe out the remaining obstacles. Especially with the reinforcements you have dispatched. A squad of heavily equipped shock troopers march to meet the challenge. The beasts native to this moon will be burned, just like the rest of those who oppose us... AT-RT design by Inthert. Swamp speeder design by 8thbrotherbrick. AT-DT is of my own design, inspired by Sean Drews and concept art. There are 5 ewoks hiding in this MOC, can you spot them?
-
*Your entry has earned 12 XP* Friends of droids, clankers and CIS: Please look away! There is it. * PEW PEW * Got it! And there it goes. Excellent shot, Gecko! Let's return to base. Drinks on you. What?! Wait, wait, wait, I didn't agree to it. Not my problem. You shot the droid, you have to pay for it. Those are the rules, we all agreed on. I am not entirely happy, how the MOC turned out. One of those builds, where the idea is better than the finished build. I first tried my luck with half an ARC-170, but I had the same problem as my comrade @Simulterious with his crashed TIE. The only difference he decided to stick with his plans. But I changed fighters: to a good old Vulture Droid. One of the best things to come out Episode I (with its counterpart the Naboo Fighter). I m happy over feedback. (The photo isn't the best, I know. My camera has given up, in the middle of the shot. So, not good) The next MOC(s) will have some more story. Or just a story. I can't really say, that my MOCs are story-driven. So there's that. So don't despair, I have plans. Greetings from the Empire
-
I made a short animated film of lego in blender. I have used lego pieces to make everything but have a twist on the traditional stop motion movies. Hope it makes you smile. [media] [/media]
-
My Version of a 1:40 minifigure scale T-65 X-Wing. It took a while to bring all the Angles together that make the front Body looks like it should. Unfortunatly i didn't made a better picture of the slim Front Edge of the Wing made of round Slopes. I took the Standard Turbine and turned it 90°. Guess i'm gonna show some more Pictures of the Wing Design in Time...
-
*Your entry has earned 3 XP* This is Gozanti Cruiser Yularen. We're in position. Starting Operation: Shutdown. IGV-55 surveillance vessel (Gozanti-class) With the defeat at Endor and Jakku, the Empire learned that they are not untouchable. So a small group of loyalists decided to act, so that something like this never happens again. They went befor the Triumvirs and laid out their plans: The establishment of Safe Worlds. Planets of little significance for the galaxy, but which allow the Empire to regroup and reorganize in the event of a overwhelming defeat. The gozanti cruiser IVG 555 Survallince-class „The Yularen“ was send to the backwater planet of Daluuj. A muddy planet in the Outer Rim. The mission: to lock down the system. Every single transmission, every message, imperial and non-imperial, has to go through the watchful eyes of the ISB. So that the New Republic can still believe that Daluuj is still a planet of no interest But under the surface is more. Much more. ---------- Just a small MOC. I build the Gozanti in one day. There you see how fast of a builder I am. (pretty, pretty fast). I always liked the look of the Gozanti. But I builded the MOC also to test my photoshop skills.
-
[MOC] The Mandalorian - Mando's S2 Speeder Bike (Scaled Down)
Admonisher posted a topic in LEGO Star Wars
I love the look of the Mandalorian on his speeder bike, as showcased in the Season 2 key art: This speeder appears in the new set "Trouble on Tatooine" (75299), and is a reasonably decent approximation considering it has to be sturdy and hold up to play. There are a few shaping inaccuracies, but that's par for the course. For reference, here's the official LEGO vehicle with no tweaks other than a hastily cobbled-together stand (and my unorthodox placement of the cape, with the left arm threading one of the neck holes to hold it at the desired display angle): The major downside, as with most LEGO speeders, is the scale! While it has some nice detail, it's simply much too large in comparison to the minifigure. The "foot pedals" (at least, that's what I presume the struts with the dark orange brackets are meant to be) are a case in point -- they're huge relative to the minifig, and nowhere near Mando's feet! So, despite the inevitability of loosing some greebling opportunities, I decided to take a stab at a scaled-down speeder bike for Mando to ride that would still successfully evoke the vehicle from the show. I also set myself the challenge of only using parts from 75299! Here's what I came up with: It's reasonably sturdy, fits both Grogu and Mando's Amban phase-pulse blaster, and the nose fortuitously lies at the correct angle. This design also allows Mando to sit a little more upright in his seat! But it's still not quite where I wanted it to be, so I did one final tweak with a few additional bars with clips, some swapped out colors, and a smooth base: Mando can now lean forward slightly as he does on the key art, which allows his cape to be properly affixed without getting crimped up. His hands still can't properly "grab" the handlebars, but it's close enough for my purposes. I'm sure I'm not the only person who has undertaken this challenge, so I'll probably be inspired to revisit this build in the future. For now, though, this makes me happy! -
Hi everyone, this is my first MOC design, a minifig scale UCS style 501st Legion BTL-B Y-Wing Starfighter. The inspiration came after watching the final season of Star Wars: The Clone Wars. It was awesome to finally see the BTL-B Y-Wing in 501st colours and I knew instantly I wanted a minifig scale version to go with my other Star Wars minifig scale ships. I've been slowly chipping away at this over the last few months, and I’ve spent a lot of time finessing the shape, proportions, colouring and details to make this design as accurate as possible. I think I have found a good balance of aesthetics, ease of construction and strength, as the design is very robust and "swooshable" for a model this big. It is approximately 1800-2000 pieces (need to update the Studio model before I know for sure), 61cm long, 28cm wide and 9cm high. To keep the proportions and look of the BTL-B Y-Wing correct, the cockpit is built with removable seats to allow minifigs to be placed for display if desired, and I opted to only allow the head of an astromech droid to be added for the same reason. I've made sure to add all of the weapon detailing, including an opening bomb bay with proton bombs, and have also added folding landing gear. I’m finishing off the instructions now and should hopefully have them done in a few weeks. I'll post the link on here once they are complete. Thanks for looking! I hope you like the design and happy to hear any feedback :)
-
[Factions Ep. 7 - Cat B][O10 - Ambria - TT] “Dank farrik”
ARKUM ELO posted a topic in Factions Archive
*Your entry has earned 14 XP* Bravura squad has once again been dispatched, this time to Ambria, on the search for Moff Pyerce’s forces. Coda, Dolore and Ferroce along with ISB had approached a settlement north of the LZ. DT-R65 and IG-828 explored the natural formations... DT-R65, IG-828 and specialists from the ISB roamed the horizon on an infantry support platform, repurposed for imperial use as a transport. A cloud of steam rises a wall ahead of them. IG-828 turns toward DT-R65. He nodds, and directs the speeder towards the steam. A white wall lay before them. “This could be a vent, from a generator, Could also be a natural vent.” says DT-R65. “We should go down there.” says one of the specialists. DT-R65 takes off his helmet, takes a knee in the barron and hot sand. He feels its coarseness between his fingers. The area around the steam has an abundance of minerals from the core. DT-R65: “I used to work in places like this… I’ll go down. IG-828 will lower me down with his grappling hook.” He puts on his helmet and IG-828 hands him the hook. The temperature rises as DT.R65 descends. “We’re receiving a transmission from headquarters.” says the specialist to IG-828. IG turns toward him, sharply as if being interrupted. The trooper takes a step back, slightly unsettled by this inhuman looking droid. “We are to return to the Crescendo for a new briefing. Bravura has established a base near the settlement, north-west of our position.” The droid turns back towards the steam, and DT-R65 cannot be seen because of it. “[We will finish our mission here.]” replies the IG unit. DT-R65 turns on his thermal scan, but it’s no use, everything is affected by the temperature of the steam. He turns his head to take a look behind him. He catches a glimpse of old mining equipment. 8 lights are pointed towards him, but they are moving towards him. He turns off the thermal view… “Dank farrik…” Infantry support platform designed by 8th_brother_brick. Modified by myself to fit an imperial theme. -
This has been my first LEGO MOC, I designed this on BrickLink Stud.io after Porsche collaborated with Star Wars to make their own spaceship. When I first saw their design I instantly fell in love with it, and I thought I might just make that in LEGO. Thanks to everyone for taking a look. Pictures
-
Hello everyone! I would like to apologize if it is not allowed to show our lego’s collection… it is considered as spam may be? Sorry in this case. It includes MOCs (LDD0xx), MODs (xxxx+LDD0xx), Lepin figures ("-F" from "false")... from all the episode films (I-IX), with referenced names from Wookieepedia (https://starwars.fandom.com/wiki/Main_Page). This videos had already existed, but today they have been updated because of the Chistmas adquisitions. The LDD files are available if someone wants any of them, feel free to improve them. I hope you like it!
-
Rebrick/Recolor of the 75060 Slave I. Going for Blacktron 1 theme. Unfortunately, some parts don't come in black. LEGO 75060 Slave B1 UCS by nixtron1, on Flickr
-
On Flickr a little bird (...or panda) whispered to my ear that the people on Eurobricks would really like my stuff so here I am! This is my Blacktron Razor Crest. It goes by Laser Thrust and features no original Star Wars pieces so it can be on Lego Ideas. If you like my ship, you could go to Ideas and support it, that would be nice!!! I really have shrunken the pics as far as I could but yeah, have a look at flickr.com/photos/ygreklego - there you'll find more!!
-
*Your entry has earned 30 XP* “The jedi were the guardians of peace in the galaxy. Oh, how they have fallen… I was alive back then, albeit a very young man, I understood the situation quite well. I knew where I stood. I’ve always known. People say you should be open to new ideas. Well, I was, I saw their point of view, and I said: to hell with it. … I once spoke to the great emperor you know, on multiple occasions. Him and I, we came from the same place, in thought as well. You know, the jedi were almost wiped out in the first battle of geonosis. I wish they had been, would have saved the world all this chaos…” (Death trooper CDR DT-R65 to droid unit IG-828 of the imperial Triumvirate) More pictures on flickr, and timelapse on my YouTube channel
-
I designed the UCS Clone Wars Y-wing Starfighter a couple of months ago, and I thought I'd share some images of it here. They are all over 1860 pieces, so pretty close to the Original Trilogy UCS Y-wing we got back in 2018. This starfighter has room for 2 pilots: One in the front, and another as a gunner in the bubble turrent. The windscreen piece behind the bubble turrent can also easily come off to reveal a small space that you can fit a crate in. And there is room for an astromech droid as well. All you have to do is remove the curved tiles which are attached in by one stud each. 39632 by ice chips, on Flickr 39632 3 by ice chips, on Flickr 39632 2 by ice chips, on Flickr 39632 4 by ice chips, on Flickr Heres some more close-up pictures. cover by ice chips, on Flickr Clone Wars Y-wing 1_5 by ice chips, on Flickr I also designed this model to be compatible with the 2018 UCS Y-wing stand. So it will fit perfectly on that stand. However, this model does need either 2 rubber bands or 2 thin threads. If you look at the 4 long panels on each of the engines, you will notice that there is a 1x1 studded area open. That is where you have to put a white or clear rubber band so that those 4 panels can stay together and not be flimsy. Alternatively, tying a thin thread around that 1x1 studded area and covering it up with some 1x1 tiles would work as well. I couldn't find any other way to connect those parts 'lego pieces wise'. I did make instructions as well at https://rebrickable.com/mocs/MOC-55730/starwarsfan66/y-wing-starfighter-yellow-gold-leader-variant/#details Let me know what you all think of this moc!
-
Hi, after long years of only reading the site, I joined in 2018 and finally I would like to spend some words about me. My first set was 645 Milk float and trailer. The first phase took some years, my brother and me we had quite many sets until 1978 or so inlcuding the first year technic sets and some small Classic Space sets I all remember fondly. New start after my Dark Ages was 6514 Trail Ranger in 1996. I spent one hour building many different car versions from this one box - which was quite a fun with only 32 pieces. With the restart the focus was on 9V trains, City and Technic, 8868 e.g. - one favorite one. Around 2000 I also bought my first StarWars set - 7140 X-Wing. Then I started with collecting the alien minfigures from Lego Star Wars. Of course it did not stop me and nowadays I have all Star Wars minifigures you can see on Bricklink and some more. In 2018 the Lego Star Wars Minilands closed and I decided to build my own one. This year I built Cavegod's Sandcrawler, KitBricksto's Tantive IV and Brickvault's Ghost, the parts for the executor are also prepared. Many other plans are set up of which I luckily some need to do on my own. On Eurobricks I especially like the friendly way of conversations and discussions with many well experienced builders and fans from all over the world.
-
Hello! Here I want to present you my MOD from the Lego 75318 The Child set. More photos on Flickr album
-
...when all through the house Not a creature was stirring, not even a mouse; The stockings were hung by the chimney with care, In hopes that St. Nicholas soon would be there; The children were nestled all snug in their beds, While visions of LEGO Star Wars Sets danced in their heads; My MOC shows a typical scene that happened every year - at least in my childhood. It is often said: "The greatest pleasure lies in the anticipation", which was also true for me. Usually I wished for one of the bigger starships from LEGO Star Wars for Christmas, like a Millenium Falcon, spent weeks dreaming of getting this set as a gift and how I would build it with my sister in our living room. P.S.: Can you spot all the easter eggs? Hints: 75257, 75288, 75274, 75276, 75277, 21042 T'was the Night Before Christmas by Aldar Beedo, auf Flickr] T'was the Night Before Christmas by Aldar Beedo, auf Flickr T'was the Night Before Christmas by Aldar Beedo, auf Flickr T'was the Night Before Christmas by Aldar Beedo, auf Flickr T'was the Night Before Christmas by Aldar Beedo, auf Flickr
-
Hello, so this is my first time posting. I made a digital moc of the Separatist Shuttle (from the clone wars show) and the Type-B Separatist Shuttle (from the clone wars citadel arc) a while ago, and I thought I'd post them here. I'm curious as to what you all might have to say. It certainly took a long time to get the design as best as I could. Separatist Transport Shuttle normal by ice chips, on Flickr backside1_2 by ice chips, on Flickr interior1 by ice chips, on Flickr interior2 by ice chips, on Flickr backside1 by ice chips, on Flickr Separatist Sheathipede Class Type-B Shuttle droid squad1_2 by ice chips, on Flickr droid squad1 by ice chips, on Flickr side angle1 by ice chips, on Flickr cargo1 by ice chips, on Flickr I believe this is how I am supposed to embed images. I have a lot more images but I think there is a limit to how much I can put here. I did also make instructions for both of these models, but I'm not sure if I'm allowed to post those here. You can find them on rebrickable if you search for the separatist shuttle. Or you can also PM me for a link as well. I haven't really seen many people do mocs for these separatist shuttles; they don't get enough love. We've seen them in plenty of clone wars episodes, and I just love the design of the shuttle and gray-dark blue color scheme. What are your thoughts on my design?
.thumb.JPG.a6e449e5685f8b389fadcf907e1be99b.JPG)
