Search the Community
Showing results for tags 'Rebels'.
Found 113 results
-
I saw this fighter being flown by Sabine on season 4 of rebels and wanted to make it. Color scheme is similar but a little off since I didn't have all the correct pieces I needed. i put this in the wrong section...hope a mod can move it to Star Wars...:/
-
MISSION REPORT: Brickmasterben11, reporting to rebels head command from the moon of Endor. ~MOVEMENT: 2 SQUARES STRAIGHT UP Nothing much to report on our third week on this moon. So far we have seen not a single Imperial. This morning we stumbled across an abandoned weapons crate while on patrol, so maybe a run-in will be occurring soon. At least we haven't run into any of the native species. Another squad made contact and said the furry beasts ransacked their camp, stealing rations. END OF BROADCAST ~Bonus Pictures:
-
I got an inspiration last weekend, and decided to build a mini diorama of the Hoth rebel trenches on a 16x16 base. Once that was ready, I felt I had more in me. This was the result (the pictures are not that good, unfortunately)
-
This is my MOC of the rebel base at Yavin IV based on A New Hope, Rogue One and Star Wars Rebels. I tried to make so that it could possibly be made as an actual LEGO set so it's one section out of four to keep the piece count at around 2,000 pieces and the price as low as possible at this size, and so the exterior can be exhibited and the interior can be accessed to at the same time. The set has 4 different sections, each one based on a different area of the base seen in the movies and the TV series. The first one is the hangar where the ships are fixed and get ready for battles, the second one is the war room where the rebel leaders meet and follow the state of the battles, the third one is the room where the rebel pilots were taught how to destroy the Death Star, and the fourth one is the ceremony room where the heroes of the Battle of Yavin got their medals. I made the set on LDD and rendered it with POV-ray. I've made a list of minifigs that I think should be included with the set and I'm finishing making the illustrations for them since some of them are new so I'll post them too when they are done! Feel free to ask any questions about the moc or leave any comments or critiques about it!
-
Hello Guys ! I show you my MOC of the TIE Fighter with the STARWARS REBELS Design. I'm inspired by the awesome "TIE Fighters short film" on YouTube too. I'm trying to be the more "accurate" I can! I'm proud of my cockpit design which has a very good shape! :) I regret just a small space between the canopy and the rest of the cockpit. Moreover, the panels ("wings") are relatively heavy for the structure. The consequence is this creation is NOT for playing! Because the structure is a little bit too fragile for that! If you are interested, I sell the building instructions (PDF + Partlist.xls) 5 euros. I have to finish these instructions. My instructions are not free to help me a little to continue to build other things and to "protect" my work... I hope you understand. My website : https://bricksfeeder.wixsite.com/bricksfeeder On Rebrickable : https://rebrickable.com/mocs/MOC-10510/BricksFeeder/tie-fighter-starwars-rebels-design/#comments UPDATE (30/10/2017) : With RUSTINIDIEL, we found a way to improve the strength of the structure. Now, You can grab the TIE By the cockpit (not by just one wing) and put in on the air and different positions. BUT be careful ! You still have to take it not as a brute or too quickly. This TIE is still made for dioramas, or collection (static positions) An updated building instructions was made. For the person who already bought my instructions, I will send the updated version for free. :) My YouTube Video : See you soon! :) You can see my other topics : ITT : [MOC] ITT (Imperial Troop Transport) from SW Rebels TIE Advanced Prototype : [MOC] TIE Advanced Prototype (aka Inquisitor's TIE) from SW Rebels A-Wing (McQuarrie / SW Rebels Design) : [MOC] A-Wing (McQuarrie / SW Rebels Design) Batman's Batmech : [MOC] Batman's Batmech Speeder Bike 614-AVA : [MOC] Speeder bike 614-AvA
-
Hello all, hope you've had a good summer and September. After a two month hiatus I'm back with a new moc based off the Ahsoka novel form 2016
-
I step into the hangar with captain Nik. "Well, here she is. The Sparrow. One of the fastest ships this side of Tatooine." I walk around to the front of the starfighter. "It's quite small." I remark. Nik smiles. "For what it lacks in size it make up for in speed." I walked around to the back of the ship, which housed a small engine. I climbed into the small cockpit to find a control array. "Here's the hyperdrive boost, the regulator, and the lasers." Nik went around showing different knobs and buttons. As I climbed back out, Nik looked off into the distance. "Make sure you take good care of her, Brick. I wish I could take here with me, but I'm being shipped out somewhere near Endor, and I can only take what I can put on my back." "Don't worry." I said. "She'll be waiting here for you when you get back. I promise." ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------This build was originally going to be a small freighter like my old ship, but I changed it up to the current model. BONUS PICS: Control Panel: Cockpit area without canopy: Hangar (I hastily threw this together in a few minutes to have somewhere to put the ship and figures) This should be counted as possible bonus points according to the rules. Please judge!
-
MDC is an abbreviation I made up for my digital creation Though I think that these are all existing colour (according to brickset ldd or both) so it could be built non-digitally. Little Phantom 1 by batalfie, on Flickr The Phantom is a modified VCX-series auxiliary starfighter that is used by the spectres of phoenix Squadron in missions against the galactic empire. Little Phantom 3 by batalfie, on Flickr My aim was to make a version of the phantom in a similar scale to that produced by Lego back in 2014 but with space for an interior and at least 3 minifigs. I have not entirely succeeded as using ldd only 2 figs can fit but in real life I am sure 3 or more could fit ,its just that positioning in LDD isn't exactly easy. The shape and proportions could also be better but I am happy with the current model, and maybe after a few modifications I will build it in the brick. Little Phantom 6 by batalfie, on Flickr Thanks for viewing.
-
First up, I want to give a shout out to Jerac, Krispy and Renegade Clone for their fantastic MOC designs... especially Renegade Clone, whose A-Wing design this is based on. My goal with adapting Renegade Clones design was to provide a base platform that all the colour variants could readily be produced using only bricks, whilst achieving the proportions and angles of the SW Rebels source material. In reviewing these renders, one change I'll likely make is to replace the 4 1x1 round tiles (98138) on the aft thruster assembly with transparent bright-orange to match the main engines. When looking at source material, there were some variations not only in the colours for the main ship, but in the style of the wing mounted weapons, so I decided to get a little creative with those. Feedback and constructive criticisms welcomed.
-
Hello Guys ! I show you my MOC of the Speeder Bike 614-AvA seen on the SW Rebels series. This MOC has closed dimensions of the minifig's scale (a little bigger) with 88 bricks. It's not perfect but better than the 75090 set I think. And next to my minifig's scale ITT (building instructions will come soon!) You can find my first tutorial to build it on my YouTube channel ! Link to Rebrickable : https://rebrickable.com/mocs/MOC-9726/BricksFeeder/speeder-bike-614-ava-from-starwars-rebels/#comments If you have some ideas or constructive criticisms, share with me please! I want to upgrade my skills! :) Enjoy and have a nice day! You can see my other topics : ITT : [MOC] ITT (Imperial Troop Transport) from SW Rebels TIE Advanced Prototype : [MOC] TIE Advanced Prototype (aka Inquisitor's TIE) from SW Rebels A-Wing (McQuarrie / SW Rebels Design) : [MOC] A-Wing (McQuarrie / SW Rebels Design) Batman's Batmech : [MOC] Batman's Batmech
-
So I built this MOC of the A-Wing inspired by its snazzy blue colour scheme in Star Wars Rebels a while ago and it's sat on my shelf for a few weeks. I finally got around to finishing the back area of it although I'm not too pleased with how the engines turned out. Most of this was built from memory without comparing it constantly to reference pictures so I took a few "creative liberties" with the ship like with the guns on the sides. Also, I don't have any tiles in blue and didn't want to make any bricklink orders so I used bricks instead, hence why it doesn't feature the pointed tip the actual ship does (let's just say the rebels modified it). A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr A Wing by R4canine, on Flickr This is my first post so if anything is wrong with formatting or something else please say! I've been browsing this forum for a few months now but never posted.
-
Hello from France Guys ! I'm Bricks Feeder and it's my third topic on Eurobricks! :) Today, I show you my MOC of the A-Wing using the design seen on the SW Rebels series and based on the Original A-Wing Concept of Mr. McQuarrie. I will make some pictures of my advance in the future but for the moment, I give you some videos (of my YouTube Channel) of my prototype on LDD. This MOC is based on the Jerac's A-Wing but I made a lot of change. For the moment, It's just a prototype on LDD. I tried to build a functional Landing gear. But I have to test the structure in real. I made Three version : Two A-Wing of the Phoenix Squadron (534 Bricks and 523 Bricks) and the A-Wing that Ezra used in the season 3 to go to Tatooine (523 Bricks). Although, These MOC need some stickers for the details. I take all advice if you have! :) You can see my other topics about SW : ITT : [MOC] ITT (Imperial Troop Transport) from SW Rebels TIE Advanced Prototype : [MOC] TIE Advanced Prototype (aka Inquisitor's TIE) from SW Rebels A-Wing (McQuarrie / SW Rebels Design) : [MOC] A-Wing (McQuarrie / SW Rebels Design) Batman's Batmech : [MOC] Batman's Batmech
-
UPDATE : 6th October 2017 The building instructions (PDF + partslist.xls) of my ITT are finally available! The rebrickable link is not valid yet (I'll do an update for that) but you can go to my website (https://bricksfeeder.wixsite.com/bricksfeeder/starwars-1). To help me a little to continue this passion, these instructions are paying (10 euros by paypal). Link to Rebrickable : https://rebrickable.com/mocs/MOC-10166/BricksFeeder/itt-imperial-troop-transport-minifigs-scale/#comments My final MOC has 1154 pieces and has light f you want. https://youtu.be/2S4VYgInwfM I hope you enjoy! :) Keep on building! ----------------------------------------------- Hello from France Guys ! I'm Bricks Feeder and it's my first topic on Eurobricks! :) I show you my third version of my MOC of the ITT (Imperial Troop Transport) seen on the SW Rebels series. This MOC has the dimensions of the mining's scale with 1174 bricks. => Almost 21cm (L) x 10,5 cm (W) x 9cm (H) I'm trying to build a "cool" Interior of the cockpit. I'll continue to work on it. I am not satisfied yet ! I'll show you my advance and if I can, the real one! If you have some ideas or constructive criticisms, share with me please! I want to upgrade my skills! :) Enjoy and have a nice day! P.S. : If you have the time... Check my You Tube Channel! ;) My previous version can be seen in this video.
-
1st release of Darth Vader in LEGO form: Darth Vader's TIE Fighter in action, from Lego set 7150 Vader's Tie Fighter and Y-Wing.
-
"Let's go men!" We burst through the doors only to have Rod shot down. I dive behind a crate while the remainder of my squad scramble for cover. It's almost as if they expected us to be here. 2 human thugs and a cyborg were unleashing volleys of lasers in our direction. I shot one thug and he fell behind a crate. I jumped out and joined the rest of my troops as we pushed towards the door. The cyborg fell, hit by a laser bolt. We ran towards the last thug, and I hit him square in chest. He fell back and into a control panel, opening the other door into the palace. "Well, at least we don't have to hack into the panel now." We advanced through the door and into the palace halls.
-
I am currently working on a Ghost MOC from Star Wars Rebels. I'm basing the design of DarthTwoShedsJackson's Ghost. I really dislike the original Lego set because its too small and has no interior. I'm making it UCS scaled and it would really help if anyone could give me some advice.
-
I am currently working on a Ghost MOC from Star Wars Rebels. I'm basing the design of DarthTwoShedsJackson's Ghost. I really dislike the original Lego set because its too small and has no interior. I'm making it UCS scaled and it would really help if anyone could give me some advice.
-
this is the update page for my beautiful moc of the rebel Nebulon- b Escort Frigate Go here for a parts list:https://rebrickable.com/mocs/MOC-8067/AWproductions/nebulon-b-escort-frigate/ I added the red details, fixed the stand, and changed the back to make it look more like the real deal, as you can see here: Version 3: Version 2 Version 1 The original topic is here:
-
[MOC] TIE Advanced Prototype (aka Inquisitor's TIE) from SW Rebels
Bricks Feeder posted a topic in LEGO Star Wars
Hello from France Guys ! I'm Bricks Feeder and it's my first topic on Eurobricks! :) I show you my MOC of the TIE Advanced Prototype (aka The Sith Inquisitor's TIE) seen on the SW Rebels series. I will make some pictures of my advance in the future but for the moment, I give you some videos (of my YouTube Channel) of my prototype on LDD. This MOC is based on the original LEGO set 75082. The "wings" were directly inspired by this forum on Eurobricks (http://www.eurobricks.com/forum/index...). I'm trying to build a "cool" Interior of the cockpit. For that point, I'm inspired by the awesome TIE Fighters short film. I'm trying to be "accurate" but it's difficult when you found pictures of a subject with different "shapes" or variations of shape between them. So I based my model on the first appearance of this fighter in the Rebels Show... I made a second version with some upgrades of the articulations of the "wings" to get it stronger. Moreover, I change all the back! I'll continue to work on it. I am not satisfied yet ! I'll show you my advance and if I can, the real one! If you have some ideas or constructive criticisms, share with me please! I want to upgrade my skills! :) Enjoy and have a nice day! P.S. : If you have the time... Check my You Tube Channel! ;) -
This is the long worked on Lego Nebulon-b Escort Frigate. I started building this one day a month ago when I was looking for something challenging to build. I did a quick google on rebel ships, and decided to do this one. I saw another, way bigger version of this on eurobricks, and I used that as a little reference, too. The ship is very sturdy, and the way it is built is very cool. Here's an overview picture and I will go into more detail in other pictures. (Just so you know this isn't the Redemtion, that's why the pods are different colors) (It is swooshable, and I intend on making an instruction manual for you guys).
-
Since TheNerdyOne_ posted his first ships for his Rebel Fleet, I was inspired to build some capital rebel ships myself. The CR90 (a.k.a. Corellian Corvette or Blockade Runner) is propably my favorite rebel capital ship - its fast and pretty maneuverable for its size, heavily armed, easy to reconfigure for different tasks, and most importantly of all, it has interesting shapes as a model and a nice contrast between its elegant long shape and the massive engine array on the back. I initially started by building TheNerdyOne_'s Corvette according to his LDD files, but I quickly realized that this model could not be built with bricks without the application of glue. So, while his model still remained my inspiration, I set out to do what's most fun with LEGO: Come up with my very own build. The model is roughly the scale of TheNerdyOne_'s Corvette - it's slightly bigger - and built very differently to his model, so that I can now with confidence call it a MOC of my own. The core consists of alternating layers of bricks and two plates stacked in multiples with a footprint of 2x3 and 2x5 studs, with modified studs (one stud on the side) running along the middle. 1xX plates are connected to the studs that run along the sides of the core structure in the middle and make for a super-sturdy base with studs on the front, sides, and optionally on top and bottom where needed. Both the engine array and the display stand are connected deep into or with the core, which results in one of the most sturdy models I have ever build. The ship I built I have christened 'ARGUS III'. It's a ship attached to Phoenix Squadron which has been outfitted with a very powerful sensor array and the capability to mask its signature to some extend. The ARGUS III has been used on several occasions by FULCRUM (Ahsoka Tano) to spy on imperial facilities and intercept secret imperial transmissions - lastly near Mustafar. I hope you like the model, and I hope @TheNerdyOne_ likes it, too - your fleet is the inspiration for my own fleet, which will hopefully join the ARGUS III in time.
-
Hey everyone, Was just browsing the board and noticed @Forresto asking about Rebels style Tie Fighters, so I pulled up the ones I designed a little while back that I hadn't posted yet. I haven't had time to build them in real bricks yet, but once I get some free time I'll probably give it a go. First up in the Standard Rebels Tie Fighter; I combined multiple techniques from different builders from here and on Flickr to get the ball as round as possible, I can't remember who right now, but if I remember I will try to add names. Changing the wing size from the standard was a bit of a pain but this seams to hold together. Next is my version of the Inquisitor's Tie Advanced Prototype; The wings were also a pain to build on this one, I tried to keep them as thin as possible, which unfortunately means they aren't the strongest design, but they will work for now. Hope you all enjoy, I realise tie fighters are a dime a dozen, but I tried to go in a different direction with my design to better fit the Rebels aesthetic.
-
I picked up a Phantom II set (75170) a couple of weeks ago for my 7 yr old son. I was immediately impressed with the figures adding key pieces to our collection, but the shuttle was severely lacking. Like usual, there was no room in the fuselage for any figures. Even the pilot barely fits...wth! So I gave it a go and chose to fix the issues. I wanted to start with a fresh piece so I could take my time and avoid my son asking for his toy every five minutes. Did some looking and found a shuttle, by itself, for $7.00. Grabbed it and got started the minute it arrived. The main idea was to add cargo and passenger room while connecting the rear of the hull with the cockpit, creating a walk through of sorts. I also wanted to maintain the exterior dimensions so we didn't lose the ability to dock with the Ghost. I wanted to keep the build simple and provide strength since it would still be played with. Like most ships, and sets for that matter, this shuttle was over-engineered. I can understand why, but it really was overkill for this application. Original set... Interior structure for top fin...
-
Hi everyone! This is my entry to the third round of the MOC-Olympics over at IDS. The task was to show the Empire and the Rebels fight over the orange cargo boxes from Rogue One and explain what they contain. After the A-Wing fighters of 'Phoenix-Squadron' had destroyed the Imperial escort and disabled the transport shuttle, Captain Syndulla's freighter 'The Ghost' took over the main mission. The Imperial shuttle was loaded with food supplies for the garrison on Ryloth. The special forces team on board the 'Ghost' was tasked with the retrieval of the cargo containers before they got lost in the infinity of space. But as they disembarked from the cargo hold and started retrieving the containers, stormtroopers with oxygen tanks on their backs rose from the wreckage. Was this all a trap? It was important for the rebels not to panic, the mission was their top priority. The people of Ryloth would starve if they abandoned their mission at the first sign of trouble.. I hope you like the build. Let me know what you think in the comments!
-
[MOCs] The Workhorse and the Racehorse of the Rebel Fleet
DarthTwoShedsJackson posted a topic in LEGO Star Wars
After playing the good old X-wing and Tie fighter series of videogames in my rare spare time lately, I had the urge to build my favorite tag-team of the Rebel Alliance: The Y-wing to deliver a huge punch to large targets, and the A-wing to clear the path for the Y-wing towards the target. I already had a good base to start with for the A-wing with my McQuarrie A-wing prototype, but I improved and modified the build once more. First of all, I made the sides smoother and the angle of the sides more accurate by getting rid of the slope bricks, and using a straight assembly of tiles mounted on a hinge instead. Here I also applied a sticker - something I normally don't do - but in this case it looks much better with the long dark sticker on the front two thirds of the sides to represent the dark gap in the fuselage for the torpedo- or missile-launchers. Also, it's an official sticker from Lego originally used for the canopy of an older A-wing set. I also made the fuselage in front of the engines one stud shorter, and the part of the fuselage in-between the engines one stud longer - both of which required a re-engineering of the internal structure, mainly for sturdiness. I also brick-built the engines differently to the official set in the recent wave, and also made them one stud longer. This gave me the right proportions compared to the studio model used in Return of the Jedi. The engines are also angled less than those of the McQuarrie prototype-version in order to give the fins the correct angle. With the Y-wing I basically had to start from scratch, which initially required some sketch-building mainly to get a grasp of the correct proportions of the engines and the cockpit sections and to get the size correct for minifig scale. As with the A-wing, I also wanted to SNOT-built it with studs-up in all 6 directions, and give it accurate greebling and detail as much as possible. I quickly realized that it was important to get the contrast between the smooth elegant cockpit and front sections of the engines and the cluttered, mechanical fuselage right. I also aimed for retractable landing gear, so that I can display it in landed mode or flight mode along with my A-wing. What can I say? I'm pretty happy with how both have turned out, and building the Y-wing with all the greebling was lots of fun. Both are sturdy - something which was particularly important with the Y-wing because the engines are heavy, as is the rest of the model, which is why the flat wide struts that connect the engines to the fuselage have their core built right into the inner structure of the engines and the fuselage, resulting in a very solid connection which prevents the struts from bending at all under all the weight - neither in landed nor in flight mode - and the engines not wobbling at all. Feel free to comment, and tell me what you think. Happy building!
