LEGO Speed Champions 2024 rumors/speculation

[Snowman184]

Wow, where did you find that image.

"Brick On"

[Void_S]

10 hours ago, Bartlomiej said:

Maybe, but will this part fit in new slick tyres?

I thought about the low-profile wheels. These ones will require another covers. Maybe these Cup plates, which were used for recent Creator Expert Corvette headlights? %

[Bartlomiej]

3 hours ago, Snowman184 said:

Wow, where did you find that image.

"Brick On"

https://www.verkkokauppa.com/fi/product/897586/LEGO-Speed-Champions-76922-BMW-M4-GT3-ja-BMW-M-Hybrid-V8-kil

And some cool photos are here too:

https://blokkenpiloot.nl/product/lego-speed-champions-bmw-m4-gt3-bmw-m-hybrid-v8-racewagens-76922/

e. g. 

[prototyp]

Was curious about these new funky wide wheels so did a quick Photoshop overlay with the recent low-profile co-moulded SC wheels. Assuming the outer diameters are the same, it looks like a 2x2 tile should fit inside the rim of the new wheel. Looks like it might be tight, but appears in the margins of typical brick-to-brick gap. Hopefully it'll fit... That said, it would be cool if there was yet another new wheel-cover/turbo-fan/aero-disc part

(there's a very slight difference in perspective between these two images, hence the slight misalignment... tried to focus on the centering of the tile and the new wheel to get a read on the fitment of a 2x2 tile and the 'brick-gap' typically kept as a minimum space between parts)

Edited January 18 by prototyp

[Void_S]

Wow, nice idea, @prototyp!

I'm only afraid if the spokes will leave too small space for this tile. The existing wheels are significstly recessed, and New ones, seems to be not... 

[Bartlomiej]

2 hours ago, Void_S said:

Wow, nice idea, @prototyp!

I'm only afraid if the spokes will leave too small space for this tile. The existing wheels are significstly recessed, and New ones, seems to be not... 

I looked closely at the some photos an I think there is around 0,5 stud gap.

So, round plate should fit 

But if we'll use these parts:

with these or similar linker:

Only tyres will be spinning and plates will stand.

So, in my opinion the best part would be modified 2x2 plate with pin like this one:

But with flat bottom. 

[Void_S]

Or put a 1x1 round plate (that will half-sink in the wheel's center pinhole) and then add the 2x2 round tile.

[Alibuchan]

On 1/16/2024 at 6:26 PM, Bartlomiej said:

Real car revealed. So, we're waiting for Lego!

https://www.instagram.com/p/C2Ky8XoIOah/?igsh=NXpoM3lrMzY1ZDZ5

That's the 2024 livery reveal on the 2023 car, the 2024 car will be revealed on Feb 14th.

[Snowman184]

9 hours ago, Bartlomiej said:

I looked closely at the some photos an I think there is around 0,5 stud gap.

So, round plate should fit 

But if we'll use these parts:

with these or similar linker:

Only tyres will be spinning and plates will stand.

So, in my opinion the best part would be modified 2x2 plate with pin like this one:

But with flat bottom. 

Yes, non-spinning wheel covers like on the real car, very cool.

"Brick On"

You know, they could bag up 10 sets of the new wheel-tires and sell every one, this new mould is truly revolutionary.

[Bartlomiej]

No F1 car in March?!

https://www.brickfanatics.com/better-look-upcoming-lego-speed-champions

[Void_S]

1 hour ago, Bartlomiej said:

No F1 car in March?!

https://www.brickfanatics.com/better-look-upcoming-lego-speed-champions

Brickset also doesn't list it... Maybe it was shifted to summer? 

[Alibuchan]

19 hours ago, Bartlomiej said:

No F1 car in March?!

https://www.brickfanatics.com/better-look-upcoming-lego-speed-champions

If it’s based on the 2024 car it will be embargoed until the actual car is released.

Im sure the same thing happened with the technic set and the pictures were released either the same day or the day after.

[Snowman184]

I'm hoping for the McLaren MP 4/4 in Speed Champions to go with the ICONS set 10330 McLaren MP4/4.

[Bartlomiej]

So BMW Hypercar will have stickers on the windscreen. Unfortunately :(

[Void_S]

56 minutes ago, Bartlomiej said:

So BMW Hypercar will have stickers on the windscreen. Unfortunately :(

Well, all previous SC sets that had this windshield, all had it stickered, not printed because of its relatively flat and rectangular shape (no 3D curves that may cause some stretches for the sticker).

[Bartlomiej]

36 minutes ago, Void_S said:

Well, all previous SC sets that had this windshield, all had it stickered, not printed because of its relatively flat and rectangular shape (no 3D curves that may cause some stretches for the sticker).

Porsche had printed windscreen:

 

 

 

New sets info!

Edited January 24 by Bartlomiej

[carlo.fadel]

17 minutes ago, Bartlomiej said:

Porsche had printed windscreen:

 

 

 

New sets info!

So, we're getting fwo F1 cars including the still unrevealed 76919 mclaren???

[Void_S]

38 minutes ago, Bartlomiej said:

Porsche had printed windscreen:

I thought you meant M4's windscreen. This particular one is "only for printing" due to such curves... Stickers may look terrible on it.

40 minutes ago, Bartlomiej said:

New sets info!

• "Lamborghini V12 Vision GT" should have a lot of relatively big curved parts rather than some small slopes to fit into the limit of 230 parts.
• As for the "Aston Martin Duo", these two relatively equal cars also meet our proposals.

The only mystery so far is this "big set" 76924 and if/when Mclaren F1 76919 will be released...

[Llewop]

I’m so glad more F1 cars are getting done. 

just need an updated Williams and Red Bull and Torro Rosso (I’m not going to call them by their new name) 

im surprised it has taken so long for the Aston Martin to be done. 
 

also kind of surprised they haven’t done like a “race set” where two or three different team cars racing against each other. 
 

I am gutted I missed the last McLaren with the pit stop set so I hope one day they could update that maybe with another team 

Edited January 24 by Llewop

[RacerRabbit]

13 hours ago, Bartlomiej said:

 

New sets info!

Awww yeah! Lego and Gran Turismo, together at last!

Also, the inclusion of a safety car in the SC range is interesting. I'm guessing the Vantage. A conversion from safety car to road car should be pretty easy.

[Snowman184]

On 1/24/2024 at 12:16 PM, Bartlomiej said:

So BMW Hypercar will have stickers on the windscreen. Unfortunately :(

Wow, you have the Bimmer set already?

[RacerRabbit]

Just found out on BirckFanatics that the Mercedes Twin Pack is rumored to include the AMG GT Roadster and an AMG G63 with a couple of unnamed sets rumored to launch in August.

Fresh LEGO Speed Champions 2024 set rumours race into view (brickfanatics.com)

[Bartlomiej]

17 hours ago, Snowman184 said:

Wow, you have the Bimmer set already?

No, found on Instagram.

[Void_S]

On 1/1/2024 at 5:53 PM, Void_S said:

76924 ($49.99, 806 pieces): the biggest set ever (before the champion was 76922 BMW M4 GT3 + BMW M Hybrid V8 with 767 parts in total).
It should include two cars, following the price, and due to the parts count, they may be:
- Some big SUV-like car with ~430 parts (like Bronco R)
- Some pony-like (or similar to BMW M4) car with 376 parts.
So far these types of cars have the biggest part count, due to their size and bulky design.

 

On 1/6/2024 at 9:47 PM, Bartlomiej said:

76824 Mercedes 2-pack

Mercedes AMG GT3 Evo

Mercedes TRX-6 G63 AMG 6x6

2 hours ago, RacerRabbit said:

Mercedes Twin Pack is rumored to include the AMG GT Roadster and an AMG G63

Hey-hey, does it really come true? I only wonder if we get 4X4 or 6X6 G-Wagen  

 

Edited January 28 by Void_S

[Gzynek2323]

Based on piece count I hope for a 6x6