Search the Community
Showing results for tags 'yellow'.
-
What is CV-Project? The CV-Project (Construction Vehicles Project) is a project i started. It will be featuring a Tractor Unit (this Topic), a lowloader and a excavator. And maybe some other Vehicles. Introduction: My Name is Christopher and i am 14 years old. You are asking yourself, why i am telling you this? Because i maybe wont understand every word you will say Dimensions: Height: 24 cm Length: 42 cm Width: 15 cm Features: • Drive: 2XL Motors • Steering: Servo Motor geared down 1:3 • Live Axle Suspension on all axles • Detailed Cab and Interior Pictures: Tell me what you think. Thanks for reading -
What is CV-Project? The CV-Project (Construction Vehicles Project) is a project i started. It is featuring a Tractor Unit, a lowloader (this topic) and a excavator or some other Construction Vehicles Introduction: My Name is Christopher and i am 14 years old. You are asking yourself, why i am telling you this? Because i maybe wont understand every word you will say Dimensions: Height: 19 cm Length: 72 cm Width: 15 cm Features: • Self locking shores • Sturdy design (It can carry lots of weight) Pictures: Tell me what you think! Thanks for reading
-
The taxi is in minifigure scale. Four doors, the hood, and the trunk can be opened. Four minifigures can fit into this six studs wide taxi. It is on Lego Ideas now. I hope you like my model, and support it. Thanks :D https://ideas.lego.com/projects/ba0ece27-3326-46d0-90ef-2a2940698db1 More models are on my Youtube channel: https://www.youtube.com/channel/UCBOYseqPC24roj_mAHtu9Yg?view_as=subscriber Modification to Taiwan Taxi My other MOC models: [MOC] Police Motorcycle #2 [MOC] Sport Bike Stop Motion Speed Build [MOC] New York City Police (NYPD) Car [MOC] Lego Mini Cooper [MOC] Japan Tokyo Taxi vol.1 東京無線タクシー [MOC] Ice Cream Truck [MOC] LEGO California Highway Patrol [MOC] LEGO Police Car [MOC] Police Motorcycle [MOC] New York City Taxi / Cab [MOC] LEGO NYC News Stand [MOC] New York City Transit Bus [MOC] Newspaper Rack [MOC] Coke/Beverage Cooler Initial D AE86 Racer AC Transit Bus AC Transit Bus Short Version Ice Cream Van
-
Spent the last few days using spare blue parts to make this mech. Decided to go with a water theme since it was blue. And why not a trident? And a giant fan thingy? Lemme know what you think. Last photo is a bit grainy cause the sun was going down :p
-
Hello everyone! I'd like to show you another modern house: Qubi House. Following Villa Diaman I wanted to try more and so here it is! Enjoy! All photos can be found in my Flickr Gallery.
-
If you remember those little clockwork robots, which used to be toys and are now prized collection articles, than you will surely recognize my representation! I've been working on this for some time now and I'm proud to say that this robot walks as well as the real thing! It uses two pullback motors, a couple cogs (gears) and 623 LEGO elements to achieve (I only hope you agree ) both good looks and great functionality. The mechanism with the incorporated motors is made to fit exactly into the case and the case comes off all in one piece (I like my modularity). The mechanism for the legs is the most simple thing ever but making it was as complicated as any of my larger MOCs, because balance played such a vital role in all of it. You can still see it wobble as it walks (I find the wobble quite indearing though ) and a lot of work went into keeping it from falling when it does. I like to think this is my best work yet, so I hope you like it just as much enjoy!!! My Flickr gallery -
Other guys get to call Interflora when they need to say sorry.
-
Hello Skoda and Speed Champions fans, Skoda 105 is one of the iconic Eastern Bloc cars of my childhood. It was a rear-engined, rear-wheel drive small family car that was produced by Czechoslovakian car manufacturer AZNP in Mladá Boleslav, Czechoslovakia between 1976 and 1990. Engine sizes were 1.05 and 1.2 liters respectively. The color scheme of this model is based on my father's first car. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-93968/_TLG_/skoda-105/#details https://www.mocsmarket.com/lego-mocs/skoda-105-building-instructions/ KIT is available on MOCHUB: https://www.mochub.com/moc/skoda-105 It is a studless build in the original, 6 studs wide Speed Champions scale and fits perfectly to the new City style cars too. I have minimized the number of the stickers to keep the flexibility of the parts in further builds, therefore only two standard vehicle registration plate stickers are used. I wanted to build the model as accurate as possible in this small scale, therefore it contains lots of details: for example the front ligths, the front grill with the narrow chrome line and Skoda logo, the side view mirrors and the rear view mirrors, the door handles, the black rubber stripe on the sides etc... Maybe the most challenging one was the C pillar solution. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures: one on the front seat with small or middle sized hair (the rear view mirror assembly has to be removed in this case) and one on the rear seat without any hair. I prefer the model as it is shown on the pictures, but there are some modification possibilties: a) a rear windscreen can be added (there is a more detailed explanation in the last step), b) many of Skoda 105 cars has side view mirrors only on one side, c) on the real cars the color of the door handles and side view mirrors are sometimes black on the other ones they are chrome. Thanks for visiting, _TLG_ Skoda 105 - Instructions 1 by László Torma, on Flickr Skoda 105 - Instructions 2 by László Torma, on Flickr Skoda 105 - Instructions 3 by László Torma, on Flickr Skoda 105 - Instructions 4 by László Torma, on Flickr Skoda 105 - Instructions 5 by László Torma, on Flickr
-
Hello Speed Champions and City fans, It was my entry to Bricklink Designer Program Series 3 and 4. It has received many kind comments and support, but unfortunately it has not been selected, therefore I decided to make the instructions available here: https://rebrickable.com/mocs/MOC-177592/_TLG_/school-bus I always loved American style school buses, therefore I decided to design one to Bricklink Designer Program Series 3. It is not actually based on a real one, but it contains many typical details: the black bumper rails and STOP arms on the sides, the crossing arm, the side and rear doors, the rearview and crossover mirrors, the mudguards, the warning lights etc.. The roof assembly can be removed as one piece and in this case the internal details are visible: there is a driver seat with steering wheel, dashboard, gear shift, passenger seats and even a fire extinguisher. It is 8 studs wide, studless build in minifigure scale and fits perfectly to Speed Champions cars or to a LEGO City. There are many working details: the front and rear doors, the STOP arms, the crossing arm and windshield wipers. I wanted to create a clean build and tried to fill every unnecessary gaps and hide unnecessary studs, therefore some tricky, but legal build techniques are used. The set includes three minifigures: a driver, a school girl with a pen and backpack and a school boy with a brick built backpack. The model has space for 17 minifigures: one driver and 16 passengers. If the passengers are kids with short, rigid legs, then they can stand on the seats. The building instructions guidelines have been followed. It is built from the palette "BDP Series 3", so there are some color and part restrictions. The color "Bright Light Orange" would be a bit more authentic, but the available parts are restricted, therefore I decided to use "Yellow" and I am satisfied with the result. The STOP sign is very rare part and it is not available in this palette, therefore it is replaced by a simple, white, circular sign with a sticker. The door 43967 is also not available in yellow, therefore it is replaced by a brick built one, however, in this case I was able to add some extra details: a black door handle, bottom window and red lights. I hope you like my design, I appreciate any feedback. Thanks for visiting, _TLG_ School Bus - Bricklink Designer Program 3 - 01 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 02 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 03 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 04 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 05 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 06 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 07 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 08 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 09 by László Torma, on Flickr School Bus - Bricklink Designer Program 3 - 10 by László Torma, on Flickr
-
A tiny microscale Offshore Powerboat!!! It contains 33 pieces without the base.Fast,tiny and yellow,the king of the sea. Offshore powerboat new_4 by Antonis Papastergiou Offshore powerboat new_3 by Antonis Papastergiou Offshore powerboat new by Antonis Papastergiou Offshore powerboat new_4 by Antonis Papastergiou Ofshore powerboat_6 by Antonis Papastergiou Ofshore powerboat_7 by Antonis Papastergiou Ofshore powerboat_8 by Antonis Papastergiou Ofshore powerboat_9 by Antonis Papastergiou, on Flickr
-
NOTE: The steam loco itself began life as a 2-8-4 Berkshire type built by @Plastic_Goth and the instructions were purchased from Rebrickable as seen here. To make this steamer my own, I upped the wheel count of the original locomotive by another leading axle, making it into a 4-8-4 Northern-type from the original 2-8-4 Berkshire as built in the instructions. The piston / wheel assembly is entirely my own work, as is the completely new 7-wide tender and the train the loco pulls. The whole train, with the steam loco and five cars - a baggage car, three coaches, and a observation lounge. This engine originally pulled my MOW (Maintenance Of Way) train when it was built three years ago. Now, it's been upgraded to passenger train service. I also updated the front of this 4-8-4 steam loco model to have a smaller cowcatcher, as opposed to the original one-piece cowcatcher I originally had installed. The rear of the loco, which is lettered for my railroad, Brick Railway Systems. Inside the cab of the engine. The baggage car. All five cars use roller-skates for door handles. These three identical passenger cars are also in the train. The observation car on the tail end of the train uses four of the new 3x3 macaroni brick parts in trans-clear for the back window. These parts are actually the reason I didn't upload this a month or so ago when the rest of the train was finished - I had to wait for them to arrive from Pick-A-Brick. Thoughts? Comments are always welcome! -
I created this upgrade version of this 1987 space set using only pieces found on the Classic Space theme. Now the spaceship can split into 3 modules, the two cockpits plus a speeder that is the mid secton of the ship. This is the set we should gotten back in 1987!. If you enjoy this MOC and want to see more of my stuff, please visit my Facebook group: Lego Space Futuron/Exploriens/SP3 https://www.facebook.com/groups/1421271881962817
-
Hi all, today I'd like to show you something I'm after since a few months. During the first days of lockdown I saw a documentary on Chile and its people, towns, traditions and lifestyle. One of the main points of the documentary was focusing on the railway running from Los Andes to Rio Blanco valley , a spectacular run between mountains, aside the Rio Blanco river. Originally it connected Chile to Argentina. And this "thing" was presented as the main attraction of the current line - its name is "Gondola Carril T-1024". I sincerely do not know why it is called "T-1024" . The "Gondola Carril" is a railmotor, based on an American built bus, the Yellow Coach Z-26. This time I understood that the letter Z is identifying the chassis type and 26 the number of passengers it could carry . The bus was normally used in Los Andes town, until it was converted into this very nice railcar. Originally used as a cheap inspection vehicle, It is now fully restored and used for touristic travels. And I can say it is an experience I would like to do once in my life. The "Ferrocarril Transandino de Chile" is a narrow gauge (metric) railway, therefore I based the whole project on 1:22.5 scale (good for running in the garden!). It is designed to run on G-Scale track (45mm), but with some modifications it could easily be converted to run also on standard Lego gauge (on large curves, since it is quite long). Since there are no specific technical specifications for the Gondola, I searched for the ones of the Z26 Bus - and tried to adapt the design according to the pictures and videos of the real railcar. The original motor used by Yellow Coaches Bus was replaced by a more modern Cummins Diesel, as nicely "declared" above the radiator. Despite the original railcar is based on a chassis, this one is basically a unibody build with some underside reinforcing (let's say - like the Jeep Cherokee XJ). It's quite light, so a medium motor is sufficient to move it. In the design, I used a PuP motor, placed in the front, under the hood. Then a pair of gears in cascade, cardanic joints and a transmission axle bring the power to the rear wheels. The "gears" I mentioned can be changed easily to have a lower or higher gear ratio, as needed. This railcar not meant to pull anything, so a lower gear ratio could save some batteries. Battery box is placed in the rear part, immediately beyond the rear axle. The small red axle you can see near the T-1024 sticker is used to turn the PuP battery/receiver on and off. The next picture shows the powertrain - it's taken from an alternative blue version of the railcar I prepared , with some freelance solutions which make it more "generic". I hope you like this one, and (more important) take a look to the original one, because it's really nice piece of history. https://www.ferrocarril-trasandino.com.ar/historia/ Ciao! Davide -
Hi, my first moc: Lego Land Rover 90 Camel Trophy Edition. Original chassis RC made project by "sheepo garage". Body is my original project, but inspired by RM8 and sheepo. I hope You like it :-) my moc`s: https://www.bricksafe.com/pages/Fabiomaster -
My kind of Sneakers by 0937 Superfan, no Flickr Since I start building with LEGO® pieces one of my goals was to design a pair of Sneakers. I hadn't a scale in mind, but with my collection growing up I found out that I had enough pieces to start making a prototype at least. When the set 43179 - Mickey Mouse & Minnie Mouse came out, I was able to finish my idea because of the Round Corner 3 x 3 x 2 Dome Top - 88293 in yellow ( yes I wanted to build a yellow pair of shoes ). When I started to search for inspiration and to check how other AFOLs were building their sneakers I found out that one thing that I was not fully fulfil were the shoe laces! So I knew that one thing that I could make a diference from the others was on this part. My favorite photo is the bottom back point of view. It does show the main part of the MOC but get a little teaser about how everything is assembled. This is my favorite type of sneakers. And you? What is yours? -
Instructions available NOW for US $7.99: Instructions Explore the depths of the deep sea with the HERMES EX101 Deep Sea ExoSuit. Seat yourself in the double-walled cockpit and use the levers to control the arms and legs. Be careful, though, the oxygen may run out! Attach the hook to rocks so you don't drift away (and watch out for the sharks)! This mech is designed with LEGO bricks that are currently available. However, lights are not included in the package but are only shown in the render. They can be purchased at several third-party retailers including LYGOD, LightMyBricks, Brickloot, and Lightailing. BUILD [url=https://flic.kr/p/2kXsKq8][/url]Deep Sea Suit Lit Drop 1 by [url=https://www.flickr.com/photos/192785398@N07/]Peter Bryant[/url], on Flickr This build is remarkably simple: It's divided into 14 submodels, most of which are repetitive. I incorporated what I believe to be my best SNOT (Studs Not On Top) techniques yet. DESIGN PROCESS As with all of my MOCs, I started by doing a rough sketch of how I wanted it to look. I took heavy inspiration from 76105-1 The Hulkbuster: Ultron Edition. This means that many design elements are taken from that mech. For example, the design of the legs is very similar to, but not a direct copy of, that robot. [url=https://flic.kr/p/2kXunQw][/url]Deep Sea Suit Lit and Released Back by [url=https://www.flickr.com/photos/192785398@N07/]Peter Bryant[/url], on Flickr FINAL PRODUCT Instructions are available now at the link above. Please, consider purchasing as I am trying to gather all of the parts to build in real life. FEATURES Minifigure cockpit (as in, a Minifigure fits inside) Fully posable Instructions bundle includes .xml file for easy upload to BrickLink and full - color instructions (White Background) Sticker Sheet and display stand coming soon!
-
Boxcab Shunter Hi guys, I've just finished a new Power Functions boxcab locomotive. I hope you guys like it. It was my first ever Power Functions MOC and I think it came out quite well. Here are the specs length: 16 bricks (with couplings) hight: 11 plates colour: yellow motor: PF train motor battery box: AAA weight: 314,1 gram But without further ado, Here are some pictures of it! Front view side view Motor How I hid the battery box And how I hid the reciever the only problem is that it doesn't have any wagons... And I have zero idea about what to build for it. I thought about some giant boat trailer or a flatbed but I scrapped those ideas. Bye
-
I came across some Blacktron minifigs in plastic bag. Love those old simple smiley faces. This calls for a MOC. How about a Blacktron pod racer? Blacktron Pod Racer by dr_spock_888, on Flickr The pit crew. Who hired that silly Gungan mechanic standing between the power couplings? Day 053 of 365: Blacktron Pit Crew by dr_spock_888, on Flickr
-
Has anyone else here recreated the Yellow Lantern Batman as seen in the LB3 75th Anniversary DLC pack? Here's an image of him so you don't have to google it yourself: I realized that all it takes is Sinestro's body (replace his hands with black ones) and legs, and a Batman head, second most recent cowl style, and cape, so I made him for my minifigure collection, and I think he looks really awesome. The only thing missing is his ring, but that's unavoidable. I'll post a picture here of my version of him now, but I didn't think that was needed before because it is literally exactly like the image above, except, of course, for his expression. -Nomad
-
Just a quick discussion...I was planning on buying the Ninjago set 70752 Jungle Trap so that I could use the translucent green sword pieces for my Green Lantern. I now realize that there are way more translucent green pieces than yellow and that Sinestro only has his one sword-thing. Anyway, are there any good translucent pieces (specifically yellow) like weapons or just normal bricks for the Lanterns to use?
-
Hello everybody, My first MOC to be posted on Eurobricks is the CAT D9 bulldozer. My goal with this MOC was to make it look as good as I could while still working as well as I should like. It has these functions, all controlled by power functions: -blade powered by 1 x M-motor -ripper powered by 1 x M-motor -treads powered by 2 x L-motor, 1 on each side for skid-stearing -two pairs of LED lights with hidden switch Pictures of the model: Here is the link for a video that demonstrates all functions. If someone could tell me how to embed it, I would be very grateful, as I could not figure it out -
I think this is the right forum to post it at.. I have build a 6 wheel sport/race car. 6 wide, front spoiler 8 wide. Description : this V8 voice command driven car is all you need for fun on the track! The 4 front wheels give you a great amount of downforce and amazing steering abilities! It has space for to minifigures who would love to race! For pictures this link: https://www.flickr.com/photos/132315528@N04/sets/72157654451150402 Note: i DONT use bb codes just because they freakin don't work when copied on my ipad and the slow connection makes it even impossible to get to flickr on the computer. Is there a way to fix this on the ipad? I'm getting annoyed.
-
I was messing around in LDD and looking at pictures of set 60098 (Heavy Haul train, not yet released for 2015. See it here: https://www.flickr.c...s-55973205@N08/ ) when I realized I probably could do a lot better using set 7939, the look-alike Cargo Train from 2010. I turned the electric locomotive into a diesel, and stretched the frame to allow for a beefier engine area. I didn't think about motorizing it with Power Functions until now, but I did make it build-able in two more varieties in case you wanted to color match 60098 with the red one, or maybe build you own engine with the black one. The cab still opens, and the driver can sit down and control the train from either end of the locomotive. This train was designed last year, but was unbuild-able until this year with the release of the back windscreen in trans-clear with a Marvel Superheroes set. The train consists of one baggage car, three passenger cars, and a observation lounge car. The rear car was based on the Milwaukee Road and it's beaver-tail observation cars. Here is the LDD file for the yellow 7939-style engine and the accompanying train cars: http://www.mocpages....1431959052m.lxf Here is the two other colors of the engine I was talking about earlier. The red one is supposed to represent 60098 (Heavy Haul Cargo train), while the yellow one is inspired by 7939 (Cargo Train). The black one is the only other color available for this type of engine. By The Way: the letters BRS should go on the three exposed studs on the sides of the locomotive, while the numbers for the engines should go on the sides of the fuel tank. 7939 for the yellow one, 7045 for the black one (because that's the only set that cockpit part comes in!) and 7944 for the red one, as it matches the other engines in sequence and was used in the 2007 set of that number. (Fire Hovercraft) ... or you could use your own numbering scheme. LDD file for the three different colored engines: http://www.mocpages.com/user_images/80135/1431958750m.lxf Thoughts, comments, and complaints welcome!
-
I have motorized my 7939-inspired MOC and added a new engine inspired by early Box-cab diesels. This is my first couple of motorized MOCs ever, and I'm not sure I did it quite right. I won't be building them, but if anyone wants to take a crack at them be my guest. Here is the front view. The yellow engine is also build able in red or black, while the blue engine is also build able in white. The cab on the yellow engine opens up, but the blue loco is inaccessible at this time. It may be possible to fix this, but it would require a roof redesign and I don't feel like redoing the engine (again) right now... Here we see the innards of the engines: The triple A Battery box and IR receiver. There are two 2x2 holes in the frame of the engine for a PF cord to the motor. No lights are included, but it may be possible to make them fit inside if you really wanted to. The roof sections that are hidden in this picture are removable, and are held on by four studs each. LDD file: http://www.mocpages.com/user_images/80135/1432672946m.lxf As I said above, these are my first motorized models, so please tell me if I did something wrong. Also, Comments, Questions, & Complains are always welcome!
-
So many of the people who like the SImpsons are fans of the many nice LEGO sets that were made by the LEGOS to be about the show. But i thought there should be a very big statue of the head of Hommer Simpsen the dad from the Simpsons. So I did the statue in the LDD. It's good old Hommer Simspon and his dognut. Homar has a mouth and just like in the show it is full of many food. He is gluttonous but love able. His tounge moves too and there is food in his mouth. Here is the Homer eat the donut. Hommer have many adventures with his wife Marg and his children Magey, Lysol, and Bert. They live in town of Springtown and have adventures with Mr. Barnes and Smather, Kirsten the Cloun, Apu Nahasapeemapetilon, Ralf and Chef Wiggem, Hand Malloman, and even Bender the Robot. I will make all of them to have adventures soon. I uploaded the Hommer so you all can look on it with you're computer and change it to be green if you really like. HOMMER SIMPSEN.lxf I hope you like the lego building I made
