Search the Community
Showing results for tags '80s'.
-
Hello Porsche and Speed Champions fans, The Porsche 911 G-series (1973–1989, often referred to as the Porsche 911 Carrera during its production period) is one of the most iconic generations of the legendary 911 lineup. Known for its distinctive "impact bumpers," introduced to meet U.S. safety regulations, the G-series combined classic 911 design with modernized features. Building instructions are available on the following lins: https://rebrickable.com/mocs/MOC-212616/_TLG_/porsche-911-g-series It is a studless build in the new, 8 studs wide Speed Champions style, and can be built with or without the rear wing. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer the brick built solutions to keep the flexibility of the used parts in further builds, therefore only a standard vehicle registration plate sticker, a Porsche logo sticker and two types of simple, triangular, black stickers are used, but the model looks decent without any stickers too (see picture 8). My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the iconic headlights, side view mirrors, door handles, a rear wing, rear seats etc.. Maybe the most challenging one was to recreate the tilted hood with the air intake. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for one minifigure. I suggest to use a small or middle sized hair or helmet. The instructions and parts list files do not contain the minifigure shown on the pictures. Thanks for visiting, _TLG_
-
Hyper Falcon I played around a bit with the idea of a car from the late '80s with some slightly updated design elements. It's a typical coupe with a mid-engine layout, in this case, right behind the seats. Yes, there is a bit of interior (though I might have made some mistakes) and the engine is under glass. P.S. The new slopes/wedges are just awesome 🤩 Bricklink Torino Classico I took some inspiration from one car after an old series of sets. I tried to make it in "classic Italian style" convertible from 70-80 with some mix of "American land yachts" Bricklink Hyperion RS Another hypercar in "24h of Le mans 2024" Bricklink To be continued...
-
Hello Ferrari and Speed Champions fans, The Ferrari GTO (often referred to as Ferrari 288 GTO) (Type F114) is an exotic homologation version of the Ferrari 308 GTB produced from 1984 until 1987 in Ferrari's Maranello factory. It was designated GT for Gran Turismo and O for Omologata (homologated in Italian). Building instructions are available on the following lins: https://rebrickable.com/mocs/MOC-201540/_TLG_/ferrari-288-gto It is a studless build in 8 studs wide Speed Champions style, and it is some kind of update of my earlier 308 GTB model with some newly released parts, but it is a different car. I minimized the use of stickers to keep the flexibility of the used parts in further builds. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the air vents on the hood, the front bumper with the turn signal lights, the tilted front grill, the turn signal lights on the front side, the black stripe on the sides, the side-view mirrors, the tiltable seats etc.. Maybe the most challenging one was the iconic rear side with the vehicle registration plate, here there is a half stud offset. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats minifigures with bigger hairs can be used too if they are leaned back (in some cases the black 2x1 tiles have to be removed too). Thanks for visiting, _TLG_ Ferrari 288 GTO - Instructions 01 by László Torma, on Flickr Ferrari 288 GTO - Instructions 02 by László Torma, on Flickr Ferrari 288 GTO - Instructions 03 by László Torma, on Flickr Ferrari 288 GTO - Instructions 04 by László Torma, on Flickr Ferrari 288 GTO - Instructions 05 by László Torma, on Flickr Ferrari 288 GTO - Instructions 06 by László Torma, on Flickr Ferrari 288 GTO - Instructions 07 by László Torma, on Flickr
-
Hey everybody! After my participation in the 80s challenge on LEGO IDEAS, I submitted ''Bob Ross: Studio & Paintings'' with changes as a product idea. We have nearly 5,000 votes in just over a month! I hope you like it and I will appreciate if you consider supporting it on the LEGO IDEAS website. Feel free to leave feedback or ask questions. :) Project link: https://ideas.lego.com/s/p:55877fc73d204a70855ca159c1a3d941 My creating is an art gallery with Bob Ross his studio from ‘’The Joy of Painting’’ and six famous paintings. You can arrange the art gallery walls by your choise, for example by folding it like a heart. The build is multifunctional, so there is the ability to detach paintings and display them as picture frames, or hang them on a real wall.
-
Hello. This forum is about classic car MOC builds and custom classic car MOC builds. Basically any car from the 90's and below can be on this forum. You can put your classic or custom classic car MOCs here on this forum too. And you can talk about classic cars. This forum is made to inspire classic car fans all around the LEGO space. And here are the things I would like to ask you to do. Do not bully or use profanity. And please do not be hesitant to report profanity. Please be nice to beginner builders who put there builds here. This is my first time creating a forum so if I mess something up or if you have any suggestions on what can improve this forum just let me know. -
Hello Big Lebowski, Corvette and Speed Champions fans, do you remember the hilarious The Big Lebowski scene? Walter Sobchak (Dude's best friend) destroys a brand new, red Chevrolet Corvette C4 (1985) with a crowbar. This car, colloquially known as the 'Vette, is a two-door, two-passenger sports car manufactured and marketed by Chevrolet across more than 60 years of production and eight design generations. The fourth-generation was the first complete redesign of the Corvette since 1963 and it is known for its sleek look. It was produced from 1983 to 1996. An other inspiration came from one of my favorite Matchbox as a child, and that color scheme will be built soon too :). This car could be a nice addition to the set 76903 "Chevrolet Corvette C8.R Race Car and 1968 Chevrolet Corvette". A-Team color scheme is possible too :). Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-80276/_TLG_/corvette-c4-big-lebowski/ https://www.mocsmarket.com/lego-mocs/corvette-c4-big-lebowski/ It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer to minimize the use of stickers to keep the flexibility of the used parts in further builds, and therefore this model include only one standard Lego sticker. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the pop-up headlights (the model can be built either with opened or closed headlights), the black stripes on the sides, the gray bottom part, the glass hatchback, the side-view mirrors, the tiltable seats etc.. Maybe the most challenging one was the iconic rear side with the vehicle registration plate, here there is a half stud offset. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats minifigures with bigger hairs can be used too if they are leaned back. (The Walter Sobchak minifigure has a custom torso and head, similar ones are available in some webshops. Its other body parts and the crowbar are standard parts.) Corvette C4 - Instructions 01 by László Torma, on Flickr Corvette C4 - Instructions 02 by László Torma, on Flickr Corvette C4 - Instructions 03 by László Torma, on Flickr Corvette C4 - Instructions 04 by László Torma, on Flickr Corvette C4 - Instructions 05 by László Torma, on Flickr Corvette C4 - Instructions 06 by László Torma, on Flickr Corvette C4 - Instructions 07 by László Torma, on Flickr
-
Hello Corvette and Speed Champions fans, the Chevrolet Corvette C4 car, colloquially known as the 'Vette, is a two-door, two-passenger sports car manufactured and marketed by Chevrolet across more than 60 years of production and eight design generations. The fourth-generation was the first complete redesign of the Corvette since 1963 and it is known for its sleek look. It was produced from 1983 to 1996. The model was inspired by one of my favorite Matchbox as a child, the color scheme was inspired by cyberpunk and destopian movies. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-85021/_TLG_/corvette-c4-skull-edition It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer to minimize the use of stickers to keep the flexibility of the used parts in further builds, and therefore this model include only one standard Lego vehicle registration plate sticker. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the hood decoration, the gray bottom part, the glass hatchback, the side-view mirrors, the tiltable seats etc.. Maybe the most challenging one was the iconic rear side with the vehicle registration plate, here there is a half stud offset. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats minifigures with bigger hairs can be used too if they are leaned back. Vette C4, Skull e. - Instructions 01 by László Torma, on Flickr Vette C4, Skull e. - Instructions 02 by László Torma, on Flickr Vette C4, Skull e. - Instructions 03 by László Torma, on Flickr Vette C4, Skull e. - Instructions 04 by László Torma, on Flickr Vette C4, Skull e. - Instructions 05 by László Torma, on Flickr Vette C4, Skull e. - Instructions 06 by László Torma, on Flickr
-
Hello Skoda and Speed Champions fans, Skoda 105 is one of the iconic Eastern Bloc cars of my childhood. It was a rear-engined, rear-wheel drive small family car that was produced by Czechoslovakian car manufacturer AZNP in Mladá Boleslav, Czechoslovakia between 1976 and 1990. Engine sizes were 1.05 and 1.2 liters respectively. The color scheme of this model is based on my father's first car. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-93968/_TLG_/skoda-105/#details https://www.mocsmarket.com/lego-mocs/skoda-105-building-instructions/ KIT is available on MOCHUB: https://www.mochub.com/moc/skoda-105 It is a studless build in the original, 6 studs wide Speed Champions scale and fits perfectly to the new City style cars too. I have minimized the number of the stickers to keep the flexibility of the parts in further builds, therefore only two standard vehicle registration plate stickers are used. I wanted to build the model as accurate as possible in this small scale, therefore it contains lots of details: for example the front ligths, the front grill with the narrow chrome line and Skoda logo, the side view mirrors and the rear view mirrors, the door handles, the black rubber stripe on the sides etc... Maybe the most challenging one was the C pillar solution. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures: one on the front seat with small or middle sized hair (the rear view mirror assembly has to be removed in this case) and one on the rear seat without any hair. I prefer the model as it is shown on the pictures, but there are some modification possibilties: a) a rear windscreen can be added (there is a more detailed explanation in the last step), b) many of Skoda 105 cars has side view mirrors only on one side, c) on the real cars the color of the door handles and side view mirrors are sometimes black on the other ones they are chrome. Thanks for visiting, _TLG_ Skoda 105 - Instructions 1 by László Torma, on Flickr Skoda 105 - Instructions 2 by László Torma, on Flickr Skoda 105 - Instructions 3 by László Torma, on Flickr Skoda 105 - Instructions 4 by László Torma, on Flickr Skoda 105 - Instructions 5 by László Torma, on Flickr
-
Hello, I have a lego pirates imperial soldier figure which I cannot find on bricklink, brickset or any price guide (and that includes the ones that include the rarest of figures, like 'figure with only 50 copies which was given away at a lego convention in Romania in 2006'), and I think it may be worth money. Will upload a picture once I find it but basically it's this figure: https://www.bricklink.com/v2/catalog/catalogitem.page?M=pi004b#T=S&O={"iconly":0} except with a tricorn and possibly slightly different head, and with the lego logo on his back. It seems to have been a keychain as it does not come apart. He used to have the bottom of a plastic key chain (like this: https://www.bricklink.com/v2/catalog/catalogitem.page?G=3977c&name=Legoland Ambassador Key Chain - plastic chain, with stripes on back&category=[Key Chain][Legoland Parks]#T=S&O={"iconly":0}) on his head but this broke off years ago, probably still in a box somewhere! I think I got the figure at a young age in a box of second-hand lego my mum got me from a co-worker (mostly 90s stuff). If anyone can give a link to a bricklink page or any sources about the figure, please let me know. Would love to know if it's valuable/how it was initially sold. If there's a different forum for which this may be more appropriate please let me know. -
Hello Magnum, Ferrari and Speed Champions fans, this targa topped 1984 Ferrari 308GTSi Quattrovalvole (pictures 1 and 6) was made famous by the television series Magnum, p.i. in which the series' lead, Thomas Magnum (Tom Selleck) drove the car around Oahu for eight seasons while on his investigations, from 1980 to 1988. Several 308 GTS cars were used, a new one for each season, most being auctioned off after filming and all with the license plate ROBIN 1. The berlinetta version of this model is called Ferrari 308GTB Quattrovalvole (pictures 2-5 and 7-8). The design inspiration of this model came from a Ferrari 308 Matchbox which I received as a child. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-64110/_TLG_/magnum-pi-ferrari-308-gts-gtb-quattrovalvole/#details or https://www.mocsmarket.com/lego-mocs/instructions-moc-magnum-p-i-ferrari-308-gts-gtb-quattrovalvole/ They are a studless builds in the new, 8 studs wide Speed Champions style. I wanted to create a sleek models which are as accurate as possible in this small scale. Only two stickers are used per model: the rectangular Ferrari logo, and the vehicle registration plate, to keep the flexibility of the used parts in further builds. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The models contain lots of details: for example the emblematic air vents on the hood (black on GTS and red on GTB), the front bumper with the turn signal lights, the tilted front grill, the rear three quarter window with black cover, the turn signal lights on the front side, the black stripe on the sides, the side-view mirrors, the tiltable seats etc.. Maybe the most challenging one was the iconic rear side with the vehicle registration plate, here there is a half stud offset. I tried to fill every unecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats and the two interior tan tiles minifigures with bigger hairs can be used too if they are leaned back. Thanks for visiting, _TLG_ Magnum's car 01 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 02 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 03 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 04 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 05 - INSTRUCTIONS by László Torma, on Flickr Magnum's car 06 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 07 - INSTRUCTIONS by László Torma, on Flickr Ferrari 308 GTB Q. 08 - INSTRUCTIONS by László Torma, on Flickr
-
Here is a little diorama I did to try and get out of my lego slump. Been really interested in the 80's and 80's tech, from Commodores to tape drives to big old floppy diskettes. Anyways, enjoy my diorama of an 80's nerd in it's natural habitat soldering away.
-
Hi Everyone! This is my Stranger Things LEGO Ideas set. Stranger Things is one of my favourite shows, so this was a passion project of mine, I spent a lot of time and effort into creating this set. While it was rejected from LEGO ideas and never made it onto the LEGO Ideas website, I'm still really proud of the end result and had a blast making it. Bellow follows some images of the project as well as a YouTube video with my commentary & more images. Another 10 images of my project can also be viewed through Flickr: https://www.flickr.com/photos/92629537@N08/albums/72157677687497238 Thanks for taking a look! I would love to hear and discuss any feedback, criticisms and thoughts anyone might have. Thank you!!
-
Hello Corvette, A-Team and Speed Champions fans, the Chevrolet Corvette C4, colloquially known as the 'Vette, is a two-door, two-passenger sports car manufactured and marketed by Chevrolet across more than 60 years of production and eight design generations. The fourth-generation was the first complete redesign of the Corvette since 1963 and it is known for its sleek look. It was produced from 1983 to 1996. This color scheme of this model is based Faceman's 1984 Corvette from "The A-Team" which is an American action-adventure television series that ran on NBC from January 1983 to March 1987 about former members of a fictitious United States Army Special Forces unit. Building instructions are available on the following links: It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer to minimize the use of stickers to keep the flexibility of the used parts in further builds, and therefore this model include only two vehicle registration plate stickers. My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic color scheme with the red and black stripes on the sides, the glass hatchback, the side-view mirrors, the tiltable seats etc.. Maybe the most challenging one was the iconic rear side with the vehicle registration plate, here there is a half stud offset. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats minifigures with bigger hairs can be used too if they are leaned back. Thanks for visiting, _TLG_ Corvette C4 - A-Team, Instructions 1 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 2 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 3 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 4 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 5 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 6 by László Torma, on Flickr Corvette C4 - A-Team, Instructions 7 by László Torma, on Flickr
-
Corrects 3 important issues. -Airlock cockpit. -Docking pins. and correct color scheme.
-
I made this little thing with +/- 10000 pieces, 6x2 48x48 base plates and it's modular. Campolide station in the 80s, I used as a reference base 2 photos only. It took me about 3 weeks to do it.
-
Hi All, My first post here, nice to meet everyone. I'm just sharing my recent MOC. Please check out my VR-052F Cyclone Ride-Armor from the Robotech/Mospeada 1980's classic animation. For those who are not familiar with the Cyclone, it was a type of armored motorcycle that a rider was able to transform into a wearable exo-suit for battle. It was one of the iconic vehicles in the Robotech/Mospeada series. It was really fun bringing this design to life in LEGO form!: Armor-Bike and Rider Mode Ride-Armor Mode This MOC is fully transformable between Armor-Bike and Ride-Armor modes. You can check out the transformation sequence here: LEGO VR-052F Cyclone Ride-Armor Transformation More higher quality images can be found on my Flickr: Daikoncat's Photostream If you really like this MOC, I would appreciate it very much if you help me reach my next goal of 1k supporters on LEGO Ideas. You can find my project page here: Lego Ideas Robotech/Mospeada Cyclone I am already aware of the licensing hurdles, but it still doesn't hurt for me to try. If you are interested in instructions, I am working on it Thanks for taking the time to check out my MOC -Daikoncat
.jpeg.d0d77c137859782bca2e18e06d194dad.jpeg)
.jpeg.3ff95ac57246b7e7c699fa184cadda06.jpeg)
-
Hello Ferrari and Speed Champions fans, Ferrari Testarossa is a legendary supercar of 1980s. It is a two-door coupé from 1986 and it is the red version of the car from the TV series Miami Vice as the used Lego windscreen is not available with white decoration. Almost 10,000 Testarossas, 512 TRs, and F512 Ms were produced, making it one of the most-produced Ferrari models, despite its high price and exotic design. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-57875/_TLG_/ferrari-testarossa/ https://www.mocsmarket.com/lego-mocs/lego-instructions-ferrari-testarossa/ UPDATE: Oct, 2021 - This MOC is available as kit too :) : https://mocsmaker.com/product/custom-building-kit-tr-84/ It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I minimized the use of stickers to keep the flexibility of the used parts in further builds. (Third picture shows the model without any stickers.) My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic side intakes with the bottom black stripe, the turn signal lights on the sides, the side-view mirrors, the front grill with the head lights, the iconic rear side with the vehicle registration plate. Maybe the most challenging one was the interior where the seat assemblies hold side panels too. I tried to fill every unecessary gaps and therefore some tricky build techniques are used. The model has space for two minifigures. I suggest to use small hairs. Without the seats minifigures with bigger hairs can be used too if they are leaned back. Thanks for visiting, _TLG_ FerrariTestarossa_byTLG_01 by László Torma, on Flickr FerrariTestarossa_byTLG_02 by László Torma, on Flickr FerrariTestarossa_byTLG_03 by László Torma, on Flickr FerrariTestarossa_byTLG_04 by László Torma, on Flickr FerrariTestarossa_byTLG_05 by László Torma, on Flickr FerrariTestarossa_byTLG_06 by László Torma, on Flickr FerrariTestarossa_byTLG_07 by László Torma, on Flickr FerrariTestarossa_byTLG_08 by László Torma, on Flickr
-
Once again I dug up something from the 80s... and once again it's something related to a movie police character called "Murphy" - Frank Murphy this time, to be precise. But although this Lego version of the Blue Thunder helicopter is in minifig scale unfortunately for Frank I wasn't able to incorporate functional cockpit doors... sorry Frank, you're stuck in there for all eternity! I hope you like my take on the iconic Blue Thunder from the 1983 movie. If you like it and you're up for a bit of a challenge you can find the free instructions here & some more pics here. Thanks & may the Gods have mercy upon poor old trapped Frank's soul...
-
The past 1,5 years I've been busy building an 80's town with most of the iconic classic town sets and all 12V grey era train sets. I started with buying sets that I didn't have yet, deyellowing all white and grey (including train tracks) parts which took longer than expected:I wasn't done when the summer of 2019 became autumn and by that time the sun wasn't strong enough (if the sun was visible anyway) so I built a de-yellowing device. I've used a total of 40 liters of peroxide solution to de-yellow most parts. After that I could start building the layout and town. The town consists of the most iconic classic town sets and three train loops from the 12V grey era. All 12V trains are running on these loops, including a locomotive from the 7777 train ideas book and a 12V crocodile MOC. There are 19 remote controls for points, signs, decouplers and a level crossing. Further more I have used over 120 original 12V light bricks for lighting. These two combined results in a total wire length of around 350 meters. Enjoy! :D
-
This is a mini version of Captain Future's Comet/Meteor spacecraft from the famous 80s cartoon. Despite its size the construction is actually reasonably stable and the design also allows the wings to rotate freely from the rest of the spacecraft.
-
Detroit, the near future... yeah well, not really, actually - it's 1987 and one of the best movies ever was released: Robocop! The future of law enforcement. Part man, part machine, all cop. This is my attempt to recreate one of my most beloved movie characters and I tried to add as much accuracy, details and features as I could. Robo stands approximately 24cm/9.5inches tall and features about 25+ points of articulation for simple recreation of memorable poses from the movies. He comes with lots of accessories, many of which can be stored inside his leg holsters (...yes, he includes an opening leg holster, one each leg! A must!!): His regular gun, the Auto-9, which can be "upgraded" with the iconic triple fire effect, the data spike (not retractable, sorry), also interchangeable heads with/without helmet (the helmeted version is designed so you can use just the top half to recreate the "take off helmet without chin guard" scene) and I also included his flamethrower arm (but not his jetpack... yet...?). The whole build turned out to be surprisingly solid, highly poseable with great playability. Hope you enjoy this as much as I do. (You can visit https://bricksafe.com for many more pics and https://rebrickable.com for the parts list/instructions, should you want a Robo for yourself. Thanks.) Also super happy and exited to announce the full set (including all parts & instructions v7) is now available @ buildamoc.com! Thanks to all who support my designs by purchasing from legit MOC stores.
-
The Robot Command Center is a controversial Classic Space set and in some senses was a pioneer set. It was the first classic Space set which wasn´t neither a Vehicle, nor a Spaceship and even a proper Base. The design pushed the limits of 1984 Lego pieces and yet the structure was solid. Making aside the fact this set had many cool features, as many 80s space sets, it had some problems. The awkward "feet", the too low grabbing arms, the unreachable boxes, but many CS fans consider its worst flaw the two large canopies on each side of the robot. I´ve seen for years several updated versions of this set as Neo Classic Mocs and either remove the "beaks" or leave them as a mere adorn. In either case the problem wasn’t confronted. Following this logic, the solution would be leaving the canopies, but making them useful. Give them a purpose, to make them more than just a decorative feature. Some examples would be making them tool boxes, containers for equipment like jetpacks or drones, covers for hi tech sensors, an extra pair of arms inside the covers or defensive mechanisms. I focused on the last option and designed modern weapons which fit inside the canopies and leaving intact the rest of the original design as much as possible. Giving the RCC a worthy upgrade for this retro set. Link https://www.facebook.com/astronautagris/posts/508673584111677
-
Hello, Violator is a legendary studio album by English electronic music band Depeche Mode. It was first released on 19 March 1990 by Mute Records internationally, and by Sire and Reprise Records in the United States. Preceded by the singles "Personal Jesus" and "Enjoy the Silence", the album propelled the band into international stardom, and also yielded the singles "Policy of Truth" and "World in My Eyes". This is a studless build based on the original LP cover. Everything is brick-built, stickers are not used. The size is 48 studs x 48 studs x 5 plates high. The rose head and the "Depechemode" assemblies are a bit tricky too, but the most challenging was to design the "violator" assembly. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-122576/_TLG_/depeche-mode-violator-lp-cover or https://www.mocsmarket.com/lego-mocs/depeche-mode-violator-lp-cover/ (The 8x16 tiles were ordered directly to this MOC and after I received them, I realized they are matte black. Of course they could be replaced by for example 2x4 tiles which are gloss black as the most of the tiles.) Thanks for visiting, _TLG_ 01 Depeche Mode - Violator, LP - Instructions by László Torma, on Flickr 03 Depeche Mode - Violator, LP - Instructions by László Torma, on Flickr 02 Depeche Mode - Violator, LP - Instructions by László Torma, on Flickr
-
Hello Ferrari and Speed Champions fans, the Ferrari F40 (tipo F120) is a mid-engine, rear-wheel drive sports car engineered by Nicola Materazzi with styling by Pininfarina. It was built from 1987 to 1992, with the LM and GTE race car versions continuing production until 1994 and 1996 respectively. As the successor to the 288 GTO (also engineered by Materazzi), it was designed to celebrate Ferrari's 40th anniversary and was the last Ferrari automobile personally approved by Enzo Ferrari. At the time it was Ferrari's fastest, most powerful, and most expensive car for sale. Building instructions are available on the following links: https://rebrickable.com/mocs/MOC-99799/_TLG_/ferrari-f40 https://www.mocsmarket.com/lego-mocs/ferrari-f40-building-instructions/ It is a studless build in the new, 8 studs wide Speed Champions style. I wanted to create a sleek model which is as accurate as possible in this small scale. I prefer the brick built solutions to keep the flexibility of the used parts in further builds, and therefore only Ferrari logo stickers are used. (If you preferred a better shaping instead of a real rear side grill, then 2pcs of parts 61409 could replaced by 2pcs of tiles and some additional stickers, see the picture 3.) My intent was to keep the width-length-height ratio of the real car and this size makes it possible. The model contains lots of details: for example the emblematic front, hood , side and rear intakes, the narrow black line on the front and sides, the front turn signals, the side view mirrors etc... Maybe the most challenging one was the iconic rear side with the vehicle registration plate and the rear spoiler, here there is a half stud offset. I tried to fill every unnecessary gaps and therefore some tricky build techniques are used. The model has space for one minifigure. I suggest to use small or middle sized hair. Thanks for visiting, _TLG_ Ferrari F40 - instructions 1 by László Torma, on Flickr Ferrari F40 - instructions 2 by László Torma, on Flickr Ferrari F40 - instructions 3 by László Torma, on Flickr Ferrari F40 - instructions 4 by László Torma, on Flickr Ferrari F40 - instructions 5 by László Torma, on Flickr Ferrari F40 - instructions 6 by László Torma, on Flickr Ferrari F40 - instructions 7 by László Torma, on Flickr Ferrari F40 - instructions 8 by László Torma, on Flickr Ferrari F40 - instructions 9 by László Torma, on Flickr
-
01 by RJ BrickBuilds, on Flickr Hello, Bozos! You can support Johnny 5 on Lego Ideas to turn him into an Official Johnny 5 Lego Set here: Johnny 5 on Lego Ideas Who is Johnny 5? Those who don’t know him, Johnny 5, also known as “S-A-I-N-T Prototype Number 5” or Number 5 for short, is a very lively and inquisitive military robot prototype who’s perpetually hungry for more “input”. He is the star of the 1980’s movies Short Circuit and Short Circuit 2 and a TV special called Hot Cars. He became sentient when he was luckily struck by lightning during a combat demonstration. Although he is designed to serve the military as a robot prototype, he has an adorable child-like behaviour and has a great respect for life. He is a peace-loving robot and refuses to use his military capabilities to harm others. Despite being very intelligent and inventive, his naivety and trusting nature has been taken advantaged of on several occasions. Design This model is fully motorised using Powered Up motors and hub and controlled through a mobile device using the Powered UP App. It uses Technic parts to ensure stability of the structure, and System parts to capture the look and form of Johnny 5. The following are the playable features of the model: Movement – This model can move around on tank tracks and uses skid steer to change directions. Body – Johnny 5’s body can tilt using a Powered Up L motor and controlled using a mobile. Arms – Arms can be raised and lowered individually using the Powered Up App. The fingers can be adjusted manually as well as the elbows. Head – The head can be tilted and turned using the Powered Up App. Eyebrows – Eyebrows can be manually adjusted to suit the desired facial expression. Laser – The laser at the back can be raised and lowered using the Powered Up App. Watch the YouTube video here to illustrate these functions better: Johnny 5 on Youtube Total Pieces: 2,711 Dimensions: Studs: W 68.4 x L 36.1 x H 73.5 Inch: W 21.5 x L 11.4 x H 23.2 cm: W 54.7 x L 28.9 x H 58.8 Weight: 99.8 ounces or 2.83 kg Johnny 5 MOC Pictures: 02 by RJ BrickBuilds, on Flickr 03 by RJ BrickBuilds, on Flickr 06 by RJ BrickBuilds, on Flickr 05 by RJ BrickBuilds, on Flickr 04 by RJ BrickBuilds, on Flickr 07 by RJ BrickBuilds, on Flickr 08 by RJ BrickBuilds, on Flickr 09 by RJ BrickBuilds, on Flickr 10 by RJ BrickBuilds, on Flickr
.jpeg.d0d77c137859782bca2e18e06d194dad.jpeg)
.jpeg.3ff95ac57246b7e7c699fa184cadda06.jpeg)
