Search the Community
Showing results for tags 'Clone Wars'.
Found 101 results
-
Hi everyone! After 15+ hours, it's finally finished! I'm quite happy with the end results however there are some small bits I'm not quite satisfied with yet. The angled wings were quite a challenge as well as the top but I think I managed to do those decently. Hope you all like it! Part count is 1002 Comments and criticism are welcome!
-
[MOC] Minifig Scale Armored Assault Tank & Defoliator Deployment Tank
IcarusBuilds posted a topic in LEGO Star Wars
Hello everyone, as promised here are my AAT and DDT MOCs. AAT - Armored Assault Tank While LEGOs Clone Wars AAT is actually very close to minifig scale, many of the proportions just aren't quite right. I changed the front sections shape a fair bit, as the actual tank isn't quite so round. It sort of flattens out in the middle, I also added the scoop in the front. In cross-section images it shows that the front domed peace is actually also a hatch, so I added that functionality since it was already on a hinge. There is enough room in the turret for a full droid, even with the hatch closed, you just need to fold the head down. The rear hatch can also open, revealing the droid crew, 1 driver and 2 gunners. Also did a palette swap for the AAT Lok Durd rides around in. DDT - Defoliator Deployment Tank The DDT design-wise isn't too different from the AAT. Shaping the stabilizers wasn't the easiest, but I think they came out alright. The turret itself wasn't too difficult to design, but oddly enough getting the grated platform along the side proved rather annoying. I had to leave it for a while and come at it with different perspective. As always, hope you enjoy. -
This is the malevolence moc from the clone wars that I designed a while ago. I guess you could call this micro-scale since the actual cruiser is just so big; 4 times longer than a Venator. At a little over 1700 pieces, I designed this moc to be a little display model. And I think it turned out quite well. I just wish the trans-pieces showed up a little bit brighter in the renders; it is kind of hard to see them. I put in some renders of the y-wings that I designed a while ago into the main image just to kind of show that amazing space battle from the beginning of season 1 of the clone wars. Overall I really liked how it turned out. Let me know what you all think! destroy the malevolence by ice chips, on Flickr UntitledModel by ice chips, on Flickr front by ice chips, on Flickr front_2 by ice chips, on Flickr back by ice chips, on Flickr I do also have a few more pictures and instructions available here if you were interested: https://rebrickable.com/mocs/MOC-58861/starwarsfan66/malevolence/#details
-
[MOC] MINIs from Clone Wars - 10 models incl. NEW Turtle Tanker from Brothers arc
obijon posted a topic in LEGO Star Wars
New models will appear in the replies to this thread so keep an eye out! Models in this thread: 1. TWILIGHT 2. TRIDENT 3. BTL-B Y WING STARFIGHTER 4. HYENA DROID BOMBER 5. ARQUITENS-CLASS LIGHT CRUISER 6. CK-6 SWOOP "FREECO BIKE" 7. T-6 JEDI SHUTTLE 8. H-2 EXECUTIVE SHUTTLE 9. RX-200 ASSAULT "STUN" TANK 10. TURTLE TANKER (NEW) Hello again everyone After re-watching some of this prior to watching the new series I decided to go back and update some of my old Clone Wars models from a while back which were originally posted on the From Bricks to Bothans (FBTB) board. As I said these are not new models but have been updated for new parts which were not around when these were first built. The original versions of these were built way before the Planets Series so I have also had to buy the figures. The old versions can be found here (with some very bad and grainy photography!): http://www.brickshelf.com/cgi-bin/gallery.cgi?f=140779 TWILIGHT First up we have the Twilight - The Twilight was a Corellian G9 Rigger-class light freighter owned and operated by the Jedi Knight Anakin Skywalker during the Clone Wars. Skywalker and his Padawan, Ahsoka Tano, used the ship to escape from a battle on Teth. The original version was grey and sand blue but I decided to ditch the sand blue tints. I also updated the top cannon as the 1x1 brackets were not available when this was first built – just the neck bracket piece. I also wish they would bring the old fingered hinge plates back as I still have old grey ones for the bottom wing as they are the only piece that work so it can fold up properly. These are now rare but are very useful for mini builds as you do not have to add an extra layer of plates for imperial shuttle/Skyhopper (hint) wings for example. It shows my age that luckily I have a few of these lying around! TRIDENT Next up the Trident - the Trident-class assault ship, also known as the Trident assault ship, was a model of aquatic gunship manufactured by the Colicoid Creation Nest. They were used by the Confederacy of Independent Systems during the Clone Wars. This one is so old the cheese slopes were not available when it was first built so I have used the cheese slopes to update the head to give it a more rounded appearance – previously this had a jumper plate and a tile where the cheese slopes are. I have also updated the “limbs” with the 1 x2 plates with handles and clips, replacing the old finger hinge plates and also added the tooth pieces and added the round tile for the cockpit. Those cone pieces are still not both available in normal red though so dark red it has to be! Meh. BTL-B Y-WING STARFIGHTER Thirdly we have the Republic version of the Y-Wing Starfighter. The BTL-B Y-wing starfighter was an assault starfighter/bomber that flew combat missions for the Galactic Republic during the Clone Wars. This did not have a major overall – mainly new white pieces as the old ones had yellowed. I have added some of those curved 1 x2 slopes which weren’t around and a couple of the round plate with a bar which are very useful for cannons on minis! The shape of the nose has been built using the horizontal hinge plates instead of wedges so that is only 3 studs wide. HYENA DROID BOMBER Lastly, for this post, the Hyena Droid Bomber - the vulture droids big brother. These were droid starfighters manufactured by Baktoid Armor Workshop. They were designed for heavy ordnance bombing runs. Based on vulture droid designs, Hyena bombers had wider and sturdier hulls with huge wings to gain stability during flight. This one had the most drastic rebuild as I rebuilt the centre section completely. Instead of the 1x2 slopes with grilles I have used the new 1x2 curved slopes for the heads both on top and underneath. I also made the centre section a stud wider. Let me know what you think. More soon. Jon -
[MOC] LEGO Star Wars Clone Trooper BARC Speeder, Apr.14 2020 finalized
JoeChu1980 posted a topic in LEGO Star Wars
Apr.14 2020 finalized Dear friends, here I would like to post my finalized LEGO Star Wars Clone Trooper BARC Speeder, as usual, previous MOC design post records had been folded at the end of this post. Since last MOC built of my BARC speeder, almost 1 year pass. Recently TCW S07 is on show and LEGO announced 75280 BARC and AT-RT battle pack as well. All these delightful things encourage me to finalize my BACR speeder MOC evolution tangle. Some time I just stared at the 3D model for quite a while, couldn’t figure out what’s myself prefer... During my MOC polish, there’s very good inspiration from Flickr ID Luca (a.k.a Luca s projects) BARC-speeder with sidecar (https://flic.kr/p/2gDHfAr ) . Especially in our domestic forum, a fan (贴吧用户_5AeVAaG) work out the front engine’s turbo feature within limited space. The key trick of front engine turbo feature, is the MF tool screw driver as below, for sure, per suitable color, 93094 Lipstick is also working fine. Since early of this year my AT-RT MOC evolution, I decide to abandon MF riding position, which need to disassemble MF legs, I knew lots fans feel bad on it, thus, now MF legs print is presentable To ref. the BARC Speeder database (by unusualsuspex, on deviantart), here I built this 15 stud length BARC speeder, if as normally count 3 stud = 1 meter, then just fit the MF scale :) Benefit from the radii of 26047 part, the sidecar is rotatable to display the scene from TCW S04E11. To duplicate myself BARC and AT-RT battle pack, here I combine it with my AT-RT MOC, and a fun of “fake news” leaking box is coming :p Also plus one more couple of BARC and AT-RT, it upgrades toward an “Kiros battle pack PLUS”, LOL With color scheme modified, easy to gain an EP3 91 Recon Corps BARC version. May.30 2019 updated Oct. 2018 modification Sept. 2018 first try -
[MOC] Delta-7 & 7B Aetherspite-class Jedi Interceptors Collection
starwarsfan66 posted a topic in LEGO Star Wars
This is my collection of the Delta-7 and Delta-7B Interceptors I've designed. I made Anakin's fighter first and used that as a kind of template to create the color schemes of the rest of the starfighters. I used a combination of snot technique in the front/middle and plates & wedges on the wings to try and get a sleek looking design. image 1 by ice chips, on Flickr Untitled_3 by ice chips, on Flickr Untitled_4 by ice chips, on Flickr Untitled_5 by ice chips, on Flickr UntitledModel_3 by ice chips, on Flickr Untitled_6 by ice chips, on Flickr Untitled_5 by ice chips, on Flickr image 5 by ice chips, on Flickr I also made instructions for these as well here: https://rebrickable.com/mocs/MOC-60714/starwarsfan66/delta-7-interceptors-bundle/#details This fighter is definitely bigger than what minifig scale should be. I did make retractable landing gear as well. Of course, a minifig can fit in the cockpit and an astromech sits in the middle, except for the 2 Delta 7 fighters where the built-in astromech head is on the wing. Let me know what you all think! -
I designed the UCS Clone Wars Y-wing Starfighter a couple of months ago, and I thought I'd share some images of it here. They are all over 1860 pieces, so pretty close to the Original Trilogy UCS Y-wing we got back in 2018. This starfighter has room for 2 pilots: One in the front, and another as a gunner in the bubble turrent. The windscreen piece behind the bubble turrent can also easily come off to reveal a small space that you can fit a crate in. And there is room for an astromech droid as well. All you have to do is remove the curved tiles which are attached in by one stud each. 39632 by ice chips, on Flickr 39632 3 by ice chips, on Flickr 39632 2 by ice chips, on Flickr 39632 4 by ice chips, on Flickr Heres some more close-up pictures. cover by ice chips, on Flickr Clone Wars Y-wing 1_5 by ice chips, on Flickr I also designed this model to be compatible with the 2018 UCS Y-wing stand. So it will fit perfectly on that stand. However, this model does need either 2 rubber bands or 2 thin threads. If you look at the 4 long panels on each of the engines, you will notice that there is a 1x1 studded area open. That is where you have to put a white or clear rubber band so that those 4 panels can stay together and not be flimsy. Alternatively, tying a thin thread around that 1x1 studded area and covering it up with some 1x1 tiles would work as well. I couldn't find any other way to connect those parts 'lego pieces wise'. I did make instructions as well at https://rebrickable.com/mocs/MOC-55730/starwarsfan66/y-wing-starfighter-yellow-gold-leader-variant/#details Let me know what you all think of this moc!
-
Hello, so this is my first time posting. I made a digital moc of the Separatist Shuttle (from the clone wars show) and the Type-B Separatist Shuttle (from the clone wars citadel arc) a while ago, and I thought I'd post them here. I'm curious as to what you all might have to say. It certainly took a long time to get the design as best as I could. Separatist Transport Shuttle normal by ice chips, on Flickr backside1_2 by ice chips, on Flickr interior1 by ice chips, on Flickr interior2 by ice chips, on Flickr backside1 by ice chips, on Flickr Separatist Sheathipede Class Type-B Shuttle droid squad1_2 by ice chips, on Flickr droid squad1 by ice chips, on Flickr side angle1 by ice chips, on Flickr cargo1 by ice chips, on Flickr I believe this is how I am supposed to embed images. I have a lot more images but I think there is a limit to how much I can put here. I did also make instructions for both of these models, but I'm not sure if I'm allowed to post those here. You can find them on rebrickable if you search for the separatist shuttle. Or you can also PM me for a link as well. I haven't really seen many people do mocs for these separatist shuttles; they don't get enough love. We've seen them in plenty of clone wars episodes, and I just love the design of the shuttle and gray-dark blue color scheme. What are your thoughts on my design?
-
Hello everyone, I'm currently working on a y wing from the clone wars TV show. The front and engines are based off @Jerac's design and the rest is mine. The outer shell of it is done however the internal structure still needs a lot of work. Feedback is welcome!
-
[MOC][WIP][LDD] Minifig Scale Clone Wars BTL-B Y-Wing Starfighter
IcarusBuilds posted a topic in LEGO Star Wars
Hey everyone, So I recently started re-watching Clone Wars since I finally got it on BluRay, and thought I'd take a stab at some of the ships since Clone Wars was the first series I started making MOCs for. (One day I may show my earlier stuff once I update it all.) I had forgotten how neat the Republic Y-Wing was, and thought I'd tackle that. I had planned to show this off as real bricks but it's going to cost a bit more than I had originally anticipated, so here is the LDD version for now. Anakin's BTL-B Y-Wing Starfighter (1) by IcarusBuilds, on Flickr Version with landing gear, there is unfortunately no room to fold it in, so it has to be removed and bricks placed over the holes. Anakin's BTL-B Y-Wing Starfighter (2) by IcarusBuilds, on Flickr They had the design drawings available on the Star Wars website, so I used those to get my design as close as I could scale wise. Anakin's BTL-B Y-Wing Starfighter - Full (1) by IcarusBuilds, on Flickr And then a collection of the different colours seen in the show. BTL-B Y-Wing Starfighter - All Colours (1) by IcarusBuilds, on Flickr BTL-B Y-Wing Starfighter - All Colours (2) by IcarusBuilds, on Flickr BTL-B Y-Wing Starfighter - All Colours (3) by IcarusBuilds, on Flickr As a side note, there is enough room to fit Anakin and Ahsoka in the cockpit, I tried to fit a clone, but the helmet is just way to big to fit under the canopy. Also I am aware that these do contain some pieces that do not currently come in the shown colours. Anyways, let me know what you think, and enjoy. -
[MOC] Minifig Scale Delta-7B Aethersprite-class Light Interceptor
IcarusBuilds posted a topic in LEGO Star Wars
So a few years back I set out to make my first Star Wars MOC (as an adult that is). I was really into The Clone Wars and decided to start with something small. I finally decided on the Delta-7B, as it was featured heavily in the series. And I had a bigger goal that I was aiming for, that it would be a part of. This was my first minifig scaled MOC, long before my Ghost, Phantom, etc. Though I've had these sitting on my desk for years, it wasn't until recently that a few new pieces came out that finally added the finishing touches to them. So I've finally decided to show them off, in lieu of the bigger thing I'll be showing in the "hopefully" near future. So lets just jump into it. Anakin and Ahsoka's Delta-7Bs. Delta-7B (1) Delta-7B (2) Closer look at Anakin's. Anakin's Delta-7B (1) Anakin's Delta-7B (4) Closer look at Ahsoka's. Ahsoka's Delta-7B (1) Ahsoka's Delta-7B (4) I also designed Hyperdrive Ring's for them. But haven't built either yet. Anakin's Hyperdrive Ring (1) Ahsoka Hyperdrive Ring (1) And just for a size comparison, with my Phantom. Delta-7B (4) by IcarusBuilds, on Flickr Hope you enjoy. IcarusBuilds -
[MOC] Minifig Scale WLO-5 Speeder Tank & Starhawk Speeder Bike
IcarusBuilds posted a topic in LEGO Star Wars
So, I'm back again with another MOC, this time I thought I'd tackle the WLO-5 Speeder Tank (aka. the Pirate Tank) seen throughout the Clone Wars by Hondo and his gang. WLO-5 Speeder Tank When I first started the design for this, it was heavily based off of screenshots since I couldn't find anything else. When I was almost finished, I realized that I had scale drawings of this thing the entire time that were included on the Blu-ray (Which I have included on my flickr). I realized almost immediately that my proportions were WAY off. So, I started from scratch. And this was the result. From the start, I wanted to try and incorporate an interior into the build, there wasn't a huge amount of space after the rebuild, but I was able to fit one in. It's not super detailed, but I was able to get the basic shapes, the driver, and most importantly fit the couch at the back, including a bottle of pirate rum. The rear hatches can open and the turret can rotate. You have to remove the turret gunner’s legs for him to fit, but given that the actual pirates legs would extend into the interior it works visually. A couple comparison photos with my Delta-7B and AAT for size. Starhawk Speeder Bike While I was at it, I thought I'd design some Pirate speeders to go with the tank. I didn't realize just how small they would be at minifig scale, so I had to simplify them quite a bit. Overall though I'm happy with the design, and by removing a few plates you can accommodate 2 riders. And a comparison to my Delta-7B. Hope you enjoy. -
I had actually built these over a year ago, but it just hit me today that I never posted them online. I was aiming to find a balance between something that's close to minifig scale, albeit without sacrificing detail and functionality. It was the advent of part 26047 Plate, Modified 1 x 1 Rounded with Handle that enabled me to build these so that the front legs can rotate inward when switching to the rolling mode. I have six completed droidekas that I decided to pose at different angles alongside a B1 and B2 battle droid for reference. I will provide a parts list and breakdown if requested.
-
Hello everyone, Though I'd start a topic on discussion about the new clone wars show. Spoilers duh. What did you all think of the newest episode?
-
Hello everyone, The Twilight is Anakin Skywalker's ship in the majority of the clone wars TV show and while it may not be the sleekest one out there it has always been one of my favourites. Unfortunately I missed out on the official Twilight set and since then I have always wanted to build it. I knew that I didn't have the pieces in my collection to build a minifigure scale version of the Twilight so I put the idea off until I got the A-Team LEGO Dimensions pack and I immediately saw that the piece used as the spoiler on the back of the van mini build would be perfect for a micro-scale Twilight build. That set the scale and then the rest of the ship followed. I am pretty happy with it overall and I think it captures the feel of the Twilight quite well. One part I am trying to work on is a new design for the main wing because I don't really like how thick it is on my model so any suggestions there would be much appreciated. Photo 2020-04-23, 1 29 25 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 30 21 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 29 49 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 28 58 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 28 31 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 28 09 PM by Mr. Dufresne, on Flickr Photo 2020-04-23, 1 27 18 PM by Mr. Dufresne, on Flickr Thank you for checking out my MOC, any thoughts or suggestions are much appreciated!
-
Hello there! I want to show you my first kinetic sculpture - Walking Grievous. Figure is activated by turning a little switch on the left side of a stand. This swith is connected to the PF Battery Box via interesting lever. The stand contains M-motor for the main function - walking. L-motor for battle mode. Walking mechanism consists of two levers to move legs forwards and backwards and lifting them. Also M-motor drives a crankshaft to move whole figure up and down for more realistic movements. p This is not a 75112 set at all. Only things thsy have in common are chestplate and head. Other thing are different. Legs have been completely reworked to match Grievous from TCW series, I've added tubes for his neck, trans-yellow barrel-pieces for chest container and removed a lot of spare plates and armor. Now the figure is much closer to the original proportions of General. It also has battle mode - Grievous is able to twirl his sabers with upper arms, which can be added and connected to the L-motor with an axle behind Grievous's back. I recommend you to watch the video to see how this all moves and works: Thanks for watching!
-
Hi! Design of my new MOC is ready! This is my first MOC from Clone Wars! Darth Maul's Gauntlet Fighter Main functions: - 735 pieces, - 1 minifigures - Darth Maul from Star Wars Rebels - a lot of details PDF Instructions - read description on my YouTube movie or check on Rebrickable! What do you think? More on my Youtube, link below! Also available on Rebrickable: https://rebrickable.com/mocs/MOC-32053/EDGE OF BRICKS/mauls-gauntlet-fighter/#comments
-
[MOC] [INSTRUCTIONS] – LAATi Republic Gunship – The Clone Wars
Chef posted a topic in LEGO Star Wars
********************************************************************** INSTRUCTIONS NOW AVAILABLE Given the number of techniques used from JBB_777’s design I have obtained his consent prior to making my instructions available (for a modest USD 10) 486 pages of detailed PDF instructions on Rebrickable ********************************************************************** It took the better part of the year but I present my rendition of a minfig scale LAATi Republic Gunship. It is based on the version from the The Clone Wars television series, which made a stronger impression on me than the one that appeared in Episode II AOTC. The TV show told the full story of the Clone Wars and the considerable extent of the gunship's deployment and impact in battle. I used both the studio model from AOTC and images from the show as reference materials to design this MOC. The MOC uses many of the building techniques seen in JBB_777’s 2017 gunship, which I liked very much, such as the Technic frame and the method to attach the wings to the body. The engine took inspiration from Caleb Ricks’ gunship from 2018. I designed this ship to be as accurate as I could to the source material. One main attribute of the ship I included but that is usually left out in other MOCs is the angled fuselage that widens from front to back. The stepped surface is a compromise to achieve this result given the choice of the internal supporting structure. Other MOCs based purely on the version from AOTC did not have to face this issue due to the omission of doors in the movie model, which left empty spaces on the ship’s lower body. My builds tend to be sturdy and this MOC is no different. However I made a little gaffe – the ship is slightly off balance. The engine and wings of the ship went through several redesigns and by the time I was satisfied with the look I did not realize how much additional parts and weight I had added. However the ships still sits fine on its own as long as no extra pressure is applied to the rear. Additional Facts: The MOC consists of 1917 parts and took 7 months to complete Measures 33cm long (excluding turret barrels) with 38cm wingspan Shares 50% of the parts with JBB_777's gunship The AT-RT from the final image is a moded version of one of JoeChu1980's AT-RTs Chef_LAATi_View1 by Chef Aslopert, on Flickr Chef_LAATi_View2 by Chef Aslopert, on Flickr Chef_LAATi_View3 by Chef Aslopert, on Flickr Chef_LAATi_View4 by Chef Aslopert, on Flickr Chef_LAATi_View5 by Chef Aslopert, on Flickr Chef_LAATi_View6 by Chef Aslopert, on Flickr Chef_LAATi_View7 by Chef Aslopert, on Flickr Chef_LAATi_View8 by Chef Aslopert, on Flickr Chef_LAATi_View9 by Chef Aslopert, on Flickr Chef_LAATi_Geonosis by Chef Aslopert, on Flickr Thanks for reading! -
[MOC] simplified full crouching AT-RT Another try May.27.2019
JoeChu1980 posted a topic in LEGO Star Wars
Mar.28.2019 updated rev13 Build instruction is made as HERE May.27.2019 updated Still be inspired by other fans' MOC, and kept on optimizing my design, the latest rev14 conception as below. With piece parts in hands so far, some prototype were built to compare with last one (rev13), given up full studless, make it more compact. Your comment are appreciated, and please feel free to let me know which one is your prefer. And some more pic of this rev14, to show the pose it could be. As usual, previous rev were edited as blow folders -
Hello gents, There was this contest going on over at LEGO Ideas so I decided to try some Star Wars once again. I hope you like it. I'm glad to have this awesome figure of General Grievous. The most tricky part about this creation was most likely the hanging platform, it broke a couple of times before I managed to find a sturdy construction that would maintain the huge overhang.
-
Hello there, I am working on some scene MOC and there's an application of the Trade Federation destroyer droid, I knew LEGO published many version before, and I got some of them, but still felt a little bit not good enough. Till I saw Flickr ID Taylor.T MOC, very good reference, just can't crouch... So I simulated and built it with materials in hand, it turns out pretty neat, and I think the crouching-able is what I prefer. Compared w/ MFs, the size is also good.
-
Hello everyone ! It is my pleasure to finally show you a model that has been in the making for a while now, My take on the Delta 7 Starfighter. The Delta 7 has been one of my favorite starchips in Star Wars for a while, in fact it was the first major set i got, so it was very important to me to make justice to this craft. Befor anything, huge shoutout to: M G, Atlas & Maelven for being the main inspiration for this model. This particular model was made to be as close to minifig scale as i could get it to be, this being 11 studs width, 23 studs in lenght and 4.5 studs in height. (taking in acount a minifig being 6 foot-ish) my model comes slightly larger than that being 25 studs in lenght & 6 studs in height, but this is due to the parts i used and to make it quite swooshable. I'll admit that some of the proportions are a bit off, but considering the size this is made on, i think that's a fair trade off. One of the most intuitive features of this model is it's ability to sport all the colors and variations seen in canon (from Mace Windu's to Ashoka's), which just shows how customizable the model is. Here are some renders of Obi Wan's along with the rest of the crew's: As with most of my models i did in fact make instructions for these, which you can buy over here !: https://ebay.us/4EBNjp Besides you also get some original artwork i made for it: Really hope you like it ! As always any feedback is more than welcome. May the force be with you -Prime
-
There's MOC for an ChinaLUG activity, and would like to share here for your fun. This's a story beyond the Clone Wars, 17 BBY, 2 years after Order 66 executed. On the system Saleucami, both Driods and Clones were gone, space-lines were destroyed, and only wasteland remained. Over view of 32x32 base scene. The main creatures play in Cut Lawquane, early stage well trained clone trooper, may participated 22BBY 1st Geonosis battle, quit and founded family with TwiLek Suu Lawquane. Forced growing procedure makes him aged fast. (I once thought about using typical clone head of animation version, but face-silkscreen style may not consist with other MFs, so changed Fett's, since they are from the same DNA) Shyyya Lawquane, Twilek, Suu's daughter; Kath, (above pic, right MF) my original character in this MOC, Togruta female from Kiros, escaped from Zygerrian's slavery and joined Cut's surviving hunting. Katooni, youngling, I imaged she was assigned to Jedi Stass Allie as Padawan, took non-millitary ship to Saleucami and just luckily missed Order 66, then survived... Acklay, a surprisingly agile fury of sharp claws and pointed fangs, the vicious acklay was one of the three arena creatures unleashed in the Geonosian execution arena. Background and base. since TCW S02E09-S02E10, the war reached here and Droids army may deployed defoliator capsule weapon (below pic left-upper zone). 19BBY Order 66 took down both Separatists and Republic, Jedi Stass Allie was eliminated and her 91 Recon corps turned back to hunt for Jedi, this outer rim system was abandoned. Above pic showed a wreckage of Stass Allie speeder bike.
-
Hey guys, with the return of the clone wars I've decided to build this moc based on one of my favorite episodes of the series S2epi5. I built one moc of the AT-TE to take the especial place on the moc. Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr www.youtube.com/watch?v=e_ggAvmKo9s
-
Wow, first real post here! This is my modification of TLG's 75042 Droid Gunship, in an attempt to make it more film-accurate. List of Modifications: - removed play features such as dropping bombs and spring launchers - slimmed down light laser cannons on winglets - changed main laser cannon to add articulation and increase accuracy - added additional pieces to front to cover gaps between ball turrets and nose - added more accurate payload on underside of disc - removed cockpit hinge, filled details appropriately Here's a view of the whole thing. Off to the side, you can see the original cockpit section, which can be easily installed As a little bonus, you can open it to reveal the HMP's Droid Brain! In canon, nearly all of the Confederacy's space and ground "vehicles" were actually independently-controlled droids. However, many games portray them as vehicles with onboard pilots, so you can easily remove the droid brain, as it is only attached via the front two studs. Above is a close-up of the droid brain. The image below shows the improved payload of missiles. Let me know what you think! I'm planning to make more accurate versions of other ships as well, so let me know what you'd like to see next!
