Search the Community
Showing results for tags 'tipper'.
Found 14 results
-
Hello people! I want to start showing you some of my latest models, it's quite a lot of time I don't share them here. This is an Iveco T-Way, full RC with PU motors and hub, controlled via Brickcontroller2 and a Joypad. It is equipped with suspensions on all axles (pendular on the front axles and pendular in 2 directions on rear axles). The drive motor is directly connected to rear axles (it "moves" together with the third axle). Stickers are self made. This model is a mod of my original static model, in grey and black version, which features Hog steering, rear pendular suspensions, fake engine and tipping body. Instructions available here: https://rebrickable.com/mocs/MOC-121004/technicprojects/iveco-t-way/#details
-
[MOC] Ginaf HD 5395
jorgeopesi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
It is based on a Ginaf HD 5395 and I chose it due how rare ti is, it looks like it is between a mining and a normal tipper truck, icing on the cake was that fifth driven and steered axle, the challenge was inevitable . It has openable cabin doors and bonnet. Tiltable cabin that hide the 6 in line fake engine. 5 axles, 2 are steered, 2 are drive axles and the last one is a drive and steered axle. All the drive axles have its diff and are connected to the engine. The steering axles are controled by 2 HOG on both sides behind the cabin. The tiltable bed woks with a long linear actuator operated with a lever that has to be used between the first and second axles, they are a hole for it on both sides of the truck. The gate of the bed has two movable connectors to close it. It is a totally modular MOC so it can be easily improved. I hope you like it, I will post a video and I put a couple of pics more to see it better. Here with the 42112 to see better the real size. And now with my other 2023 MOC (if I do not promote myself... ). Ok, ok the last one... Thank you for comment. The WIP thread is here Ginaf HD 5395 Video here Ginaf HD 5395 Video -
[WIP] Ginaf HD5395 (Render added 29 12 2023)
jorgeopesi posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
It is been a while without building, so good for me whatever it ends... It will be a 10x6 truck with 3 steered axles, the last one is the rare one, I do not know if it will be motorized or not, pneumatic or not, I do not know much so I just keep building. I discarted using bigger wheels because it would be too large but who knows... -
Leyland T45 Roadtrain, 42078 c model
BIGRIG2005 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
So, I ripped apart my previous Renault magnum also made from the bits out of the 42078 Mack truck set, and created this. A Leyland T45 Roadtrain. I have tried to make it one of my best c models yet, by trying to get a nice looking design, but still incorporate heaps of functions. The truck features: -a tilting cabin -opening doors -HOG steering -Working fake 6 cylinder Cummins motor -Working Mid-Lift axle -Same fifth wheel as Mack anthem, so trailers are interchangeable between the trucks. The trailer is a bulk tipper. I didn’t really base it off any trailers but more rather combined ideas from different trailers. I combined both the chassis from a side tipper and added a regular bulk tipper bed to that. The trailer features: -A tipping bed which is raised an lowered by a large actuator ram. -working stabiliser legs -suspended front axle (allows movement up and down so follows contours on undulating ground) -automatic locking tailgate (cannot be opened at anytime unless a force is acted upon it) -aligning rails on tipper bed to limit bed movement from side to side when fully lowered. Hope you guys like it 🙂. Cheers, Kyle -
Mack Granite 6x4 dump truck
grego18f posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Following numerous modifications on the Mack #42078, I decided to build an icon: The Granite. This is not my first one (See here) but built on a smaller scale (1:22 instead of 1:17). The proportions of the hood have been corrected compared to the original set. It is shorter now. It is far from perfection, but I think I have found a good compromise between looks and realism. All the necessary details are here: horns, jig lights, asymmetric sides… Some areas are not completed yet. This is the case of the front mudguards where I am missing some 1x1 black beams. Also, the taillights would look better with an oblong shape. The cabin (and all the insides) have been lowered by 1 stud leading to a redesign of the steering mechanism. The engine remains unchanged compared to the set. The front cooling fan has been replaced by a 20t simple bevel gear to accommodate the short hood. The rear part of the chassis is close to the one on the snowplow designed by @M_longer (42078 alternate). It enables to place the additional snow equipment. The tipper is white, with realistic shapes. Here are some views of the mechanics (very simple): The LDD file is close to completion. At this moment, I am not sure if I will share it because of the rear axles being the same as @M_longer’s. I did not buy the instructions for his alternate, all is built after photos. Hope you like it ?. Any constructive criticism is more than welcome! -
Classic Town 4-axle Mercedes Benz Arocs 4145K equiped with MEILLER Tipper, built in 4-studs wide (6-studs for the tipper). 02 by George Legoman, on Flickr 01 by George Legoman, on Flickr 16 by George Legoman, on Flickr 05 by George Legoman, on Flickr 04 by George Legoman, on Flickr
-
Classic Town 4-studs wide Truck and MEILLER Tipping Semitrailer 01 by George Legoman, on Flickr 006 by George Legoman, on Flickr 37 by George Legoman, on Flickr 10 by George Legoman, on Flickr 21 by George Legoman, on Flickr
-
[MOC] Mercedes Arocs Tipper
Thirdwigg posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Time for another truck, and this one is orange, because orange is awesome. Modeled (kindof) after the current Mercedes Benz Arocs. Features two axles driving a two cylinder fake engine, two steering axle with different ratios, tipper bed, tilting cab, and working doors. More at Thirdwigg.com. -
[MOC] Mercedes-mini with trailer
super-jaschka posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi there, after assembly 42043, I wanted to make a little copy. It turned out for me or not, it's up to you. Motorized functions. - Steering (Servo motor) - Driving and tilting of cargo bay (L motor) Manual switching functions "driving - tilting of cargo bay". When cargo bay is lifted, the side automatically opens. The cargo bay is mounted on a separate frame and fixed to six connectors to the truck chassis. So you can easily replace it with another element. The trailer is made similar to a truck. http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// http:// -
(MOC) Little truck with a trailer
jaschka xxl posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi there, after assembly 42043, I wanted to make a little copy. It turned out for me or not, it's up to you. Motorized functions. - Steering (Servo motor) - Driving and tilting of cargo bay (L motor) Manual switching functions "driving - tilting of cargo bay". When cargo bay is lifted, the side automatically opens. The cargo bay is mounted on a separate frame and fixed to six connectors to the truck chassis. So you can easily replace it with another element. The trailer is made similar to a truck. What happened, I can upload only one photo And why I have only two posts and not one topic, new member... -
-
-
Good day. After a rather long deliberation, I settled on the idea of a tipper, because I have not made such a model until this time. And now, without further ado, I give you my homemade. Function of model: working steering and lifting / unloading hopper. Turning the wheels through a gear on the roof. And, accordingly, the function of lifting / unloading is also carried out through the gear, which is located on the side of truck. A pair of stairs to lift tipper Driver's cab. And finally... Thanks for watching!
-
Hey This is my new creation Tatra T810 tipper truck. Truck have full 6x6 drive (without differential), Tatra suspension and pneumatic lifting tipper. Happy new year!!
