Search the Community
Showing results for tags 'f1'.
-
Well, well... It's almost half of the 2025! This year's Speed Champions was amazing! All F1 cars, F&F and also amazing summer's release! Just whoa! Let's start discussion about 2026 cars!
-
I know it’s a bit early But while we wait for the set to be released… I don’t like the cylinder parts much anymore, so I intend to modify the engine. Judging from the photos we’ve seen, the engine is connected through the two connector blocks and apparently nowhere else. I’ve tried to make a new engine of the same size but of the kind I prefer, and with an attempt at a fake split turbo. Assuming there is a bit of space above where one connector block would be, the spinning ‘compressor wheel’ would be visible from the slot in the bodywork. Depending on the clearance beneath the engine, there’s a geared solution that would make the ‘compressor’ spin faster, and a rubber band solution that takes up less space. How bad it it? Suggestions? -
Well 2024 LEGO Speed Champions released 2 last cars (F40 & NASCAR) so came time to discuss about 2025. Somewhere in internet I read LEGO go all in F1 cars in 2025. What's your thoughts?
-
A crazy project I’ve always wanted to build! This fully studless Espace F1 fits four minifigs, features a detailed V10 engine between the rear seats, Simulated rear suspension with F1 springs, and custom 3D-printed wheels made by Brick The Brick— complete with authentic blue nuts on the left and red on the right! It also includes DIY functional LED headlights that switch on and off by magnetic proximity, and custom vinyl stickers designed by a friend of mine and professionally printed by an online printer shop This car was a legend in Gran Turismo 2, so I just had to build it to sit next to my Suzuki Escudo.
-
After some work in my (not so much ) freetime, I almost finished my project for a F1 racetrack with paddocks. I started to work on it some months ago, due to I like F1 and motorsports and I was partially inspired by old LEGO sets I played with when I was a child. First design idea was based on old road plates, but I cannot find a plate that really matched my idea and needs. So I decided to move on to new LEGO modular roads and I think it was a very good choice: they gave you ability to reach high details level. I was able to reproduce racetrack start line, cars positioning lines, pit lane markers and so on. In addiction to it I was able to add studs on pitlane so you can attach mechanics minifigs. The top section of each team-box can be detached easily and can be swapped togheter as you prefer. I designed some race commentary rooms with microphones, race statistics on monitor and so on and a podium part. The podium section is two team-box wide, fully detachable and has a pilots after race interview room on the back. MOC has width compatible with standard 32x32 road plates (2 of them) so it can be easily added to an existing layout. I also tried to imagine some stickers to be placed on podium section top panels. I tried to design this as modular and extendable as possible and now I'm working also on the part for the spectators which will be attached in front of paddocks (where there's the small green grass part) and it will be also compatible with 32x32 road plates. I added my MOC to LEGO Ideas, if you like it you can support me here: https://ideas.lego.com/projects/a914f1ad-f2da-4ec9-80df-009c2073b7c1 NOTE: I cannot edit the project on Ideas yet, so some images here are newer and a bit different. In a couple of weeks I will be able to edit the images on Ideas as well :D
-
Hello everyone! First I have to say, that I'm new here and this is my first MOC ever, so it's not as good as I imagined it to be. It's a bit inspired by Crowkillers model 42083 B Model Bugatti Formula 1 Race Car, but most of it are my own ideas. Let's start with a photo! Functions: - Full independent double wishbone suspension - Steering - Fake V8 Engine & RWD - Openable engine hood All the parts are from Chiron 42083 set, as it is the only set I own. I am pretty proud of how it looks, apart from the front suspension. It doesn't look how I wanted it to be, but it's all because of lack of experience and time. There's no gearbox, because I have absolutely zero experience with that and I didn't want to waste a week on that. But maybe in next version... who knows :) I especially like the front wing, which in my opinion is an improvement over Crowkiller's version. Let me know guys what you think! -
Hello I would like to share my first MOC Ferrari F1 SF90 in 1:8 scale. Making the MOC my main goal was display model so I decided to make it look as close as possible using all official Lego parts to real F1 car. But I wanted to have it all the basic features F1 car should have which are: - front and rear suspension - fake v6 engine (created by SuperKoala ) - removable front wing (I started all build from this element actually) - removable engine cover, - removable headrest system (this was added at the very end I didn't thought about this at all but it just came up naturally) - drs - steering The dimensions of the model : Dimensions 70 x 25 x 14 cm Weight 1,95 kg Pieces: 2186 My main donners at the very first stage were 42056 and 42000 which I already had and they had lots of elements I could use to try the concept. The first version was funny to watch as there were so many colors all over the place ;) I have used wheels and tires from 8674 as they are the best looking one and fit the best for design and don't have any labels on them (as unfortunately 8458 and 8461). The instruction has been done in Stud.io in PDF. Instruction build I also designed stickers sheet ready to print and I also will have printed version too. Hope you like it. Whole gallery Follow me: https://m.facebook.com/f1moc https://www.instagram.com/f1moc/
-
Manor was unfortunately one of the unluckiest teams in formula 1, and in 2016, its last year, the MRT05 was driven by Esteban Ocon, Rio Haryanto and Pascal Wehrlein. That car had a nice livery, so I built my replica out of legos! Sorry for Insta I had some problems with Flickr. I am pleasured if you leave some comments/ feedbacks/ tips.
-
My special rendition of Ferrari SF90 Mission Winnow. https://forum.brickset.com/discussion/24340/f1-custom-stickers-collection-2016-1990-2006#latest More to come..
-
This is my first try at making a tread and posting pictures, so I hope I do it right. It all started with me making a very oldschool 2015 Sauber car out of ancient lego I found in a tray in the basement. 20190310_161317 by Martin Hansen, on Flickr Later lego started making real versions of F1 cars and I remade my 2015 Sauber. 20190310_161340 by Martin Hansen, on Flickr 20190310_161434 by Martin Hansen, on Flickr Then during the 2018 season I started making all of the teams cars and I finally finished the project, right in time for the 2019 season to begin next week The cars were made with parts available to me and might not be the perfect match, but they are good enough for me. All 10 cars 20190310_161801 by Martin Hansen, on Flickr Mecedes. I made some changes mainly removing some green, which I feel are not "of the right shade" url=https://flic.kr/p/24vFQut][/url]20190310_161821 by Martin Hansen, on Flickr 20190310_161842 by Martin Hansen, on Flickr Ferrari. Is the official one, I think. 20190310_161900 by Martin Hansen, on Flickr 20190310_161913 by Martin Hansen, on Flickr Red bull 20190310_161944 by Martin Hansen, on Flickr 20190310_161957 by Martin Hansen, on Flickr Renault 20190310_162054 by Martin Hansen, on Flickr 20190310_162104 by Martin Hansen, on Flickr Haas 20190310_162117 by Martin Hansen, on Flickr 20190310_162126 by Martin Hansen, on Flickr Mclaren 20190310_162525 by Martin Hansen, on Flickr 20190310_162536 by Martin Hansen, on Flickr Force India 20190310_162756 by Martin Hansen, on Flickr 20190310_162810 by Martin Hansen, on Flickr Sauber 20190310_162819 by Martin Hansen, on Flickr 20190310_162831 by Martin Hansen, on Flickr Toro rosso 20190310_162851 by Martin Hansen, on Flickr 20190310_162910 by Martin Hansen, on Flickr Williams 20190310_162920 by Martin Hansen, on Flickr 20190310_162928 by Martin Hansen, on Flickr On the grid. 20190310_162039 by Martin Hansen, on Flickr 20190310_162617 by Martin Hansen, on Flickr 20190310_163022 by Martin Hansen, on Flickr All of them 20190310_163203 by Martin Hansen, on Flickr Some cars are a bit dusty, it was a long season and some was done way before others. I hope you will enjoy them.
-
The six wheeled Tyrrell P34 was the first F1 model I built back in 2006, using a mix of Technic and System LEGO parts. Since then, I have made several F1 cars covering about three decades, from late 60s to early 90s, all in 1:8 scale. Due to the small front wheels of the P34, the compact front suspension of the first model was working, but was not as accurate as I would have liked. That’s why last year I decided to evaluate the possibility of building a detailed and fully working front suspension for this iconic car, taking advantage of all newest parts introduced by LEGO, as well as old and discontinued ones to reproduce this state of the art model in a bigger scale. In fact, the 22969 rims and 32296 big tires that I’ve always used as rear wheels in all previous models, in this case are acting as the “small” front wheels, in a fully independent double front suspension. There is a single central anti-roll bar that reacts to the displacement of the two front axles. At the same time, the steering rack is directly acting on the front axis, while the movement is then transferred to the second axis through a pivot and levers. As a result, the overall model scale went up to 1:5, and this lead to a completely brick built rear wheel concept, with an internal rigid frame to keep the cylindrical shape and support the model weight without distortion, and an outer layer of rubber elements. In such a large model, I decided to also include some RC features: XL-motor for driving, servo-motor for shifting, M-motor for steering. All of them are controlled with a powerful BuWizz unit. The compact 4 speed gearbox is a reinforced mod of Paul J Boratko III’s solution with the new rotary selector, while the shift drum is based on the concept MK II of P-LEGO, adapted to stay within the side prismatic fuel reservoir. Obviously, inside the cockpit, the steering wheel rotates while steering, and the shift lever moves as well while shifting. Other features are the various brake cooling systems (through NACA intakes and hoses for the front axis, and dedicated ducts for intermediate and rear wheels), a 90 degree V8 fake engine with 0.5 stud pitch between banks, air intake cones, two side water cooling radiators, three oil cooling radiators (two paired with water ones, one on the rear wing support), rear suspension with big 11.5L shock absorbers and stabilizing bar, side windows in the cockpit, and more. Dimensions: 798x389x188 mm Weight: 5.3 kg Parts: about 6’000
-
Hello! I'm happy to share my (first) full MOC in the Icons F1 series, the Jordan 191! I started working on this a few weeks after the 10353 Williams FW14B was announced since printed wide rear tires would finally be available. I'm still not sure what TLG might release next in this series, but decided to try my hand at the Jordan 191 due to its historical significance as Michael Schumacher's F1 debut car and also to add some nice color contrast with the red/white McLaren and blue/yellow Williams. The initial build started off as a digital mod of the FW14B with a green and blue livery and an aggressive forward tilt on the upper intake. A new front wing followed and things were progressing nicely until I realized that a 2-stud wide sidepod was simply too thin and made the blue/green ratio look off. Thanks to some inspiration and feedback from @prototyp, I decided to rework the tub to add an additional plate of thickness and also made a few tweaks to the cockpit area. I was also able to use minifigure life rings in pearl gold on the inside of the rims to mimic the yellow markings on the rims in real life. A few compromises had to be made to some of the finer details in the interest of stability, but I'm pleased to say that the end result is rock solid and holds up extremely well next to the MP4/4 and FW14B. It features the usual working steering and removable engine cover with a model of a V8 inside, and is compatible with the same stand used with the Icons F1 cars. Schumacher's "Tic-Tac" car: Proportions check: Building instructions are on Rebrickable: https://rebrickable.com/mocs/MOC-213339/bentobrick/jordan-191/#details Let me know what you think! -
I looked at the McLaren F1 model and the pilot figurine for a long time and still couldn't come to terms with their size :) Since it is not possible to enlarge the figure, we had to make the car smaller :) Since I disassembled the official model, I modeled two cars in the Studio for before/after comparison. A couple more photos with stickers How do you like the idea and execution? :)
-
Hi everyone, Here’s my latest MOC: the Red Bull RBX32 “Pikes Peak Edition”, an original build in 8-wide Speed Champions scale. This custom car combines the raw, muscular feel of a Hot Rod with the sharp, aerodynamic lines of a Formula 1 car. It's heavily inspired by the wild engineering seen in the Pikes Peak International Hill Climb, as well as by Aaron Beck’s real-life F1 32 concept – a mashup of a Ford '32 coupe and an F1 chassis. While I used many parts from LEGO set 77243 – Oracle Red Bull Racing RB20 F1 this is not a MOD. The chassis, proportions, and overall concept are entirely original. My aim was to design something that feels fast, aggressive, and believable as a Red Bull-backed experimental racer — blending motorsport fantasy with LEGO realism.
-
This is my second alternative build of McLaren F1 42141. This time I was inspired by Dakar rally and I made a version of Sebastien Loeb's Prodrive RX Hunter. This is the 2022 version and just like all my Technic model based on a real car; I invested a lot of effort into making it as close as possible to the real counterpart. I was able to reproduce the position of the engine, The curved shaped roof, doors and even the spare tire!Functions:- Independent suspension in all wheels- V6 fake engine (located inside the cabin just like the real car!)- HoG steering- Opening doors (Butterfly doors)I am no good at stickers but I made a basic sticker sheet that I am including as optional.Can't wait for the Audi RS Q e-tron???Don't worry! This one will keep you busy. Instructions on rebrickable as always: https://rebrickable.com/mocs/MOC-152876/A_Great_Builder/prodrive-brx-hunter/#details -
Hi, guys! I know that, there is February yet and we're before March release, but let's start new topic! So, at first I want to say that 2023 wave is amazing. New brand, new mudguards, new windscreens! Whoah! And there are my speculation/cars I want to see in Speed Champions 2024: ~ Porsche 911 GT2 RS Clubsport 25 ~ Porsche Taycan ~ Audi e-tron GT ~ BMW M6 ~ BMW M4 GT3 & BMW M3 1991 ~ Ferrari 499p LMH ~ Ford Focus RS 2021 ~ Honda Civic Type R ~ Cadillac LMDH What do you think about my cars? What cars would you like to see? Show your speculation/wishlist.
-
Hi everyone In 2007, an intense battle was raging on F1 tracks around the world. Lewis Hamilton was having a barnstorming rookie season, battling his teammate and reigning two time world champion Fernando Alonso for the world championship. But Finnish driver Kimi Raikkonen was sneaking up on the McLaren pair, and took the lead at the last round in Brazil to win the championship. Here is my rendition of Kimi's car, the Ferrari F2007. -
I've been into the update of old sets in the last couple of years, so it was just a matter of time before I tried to update Set 8440 from 1995. Set 8440 is simple with only steering a V-6, and a rear differential, but I thought I could add some features. Turns out I really couldn't . I stared with building the original 8440 in studio, and making it trans light blue as introduced by @Seasider for TC20. I placed a couple of panels and wheels to get an idea of where to place the "hardpoints." The wheels would be a little bigger, but I felt it would be a good place to start. Off to work I went. I placed the panels early, and worked on the rear engine and transmission. I had hoped to add some sort of suspension, but lost interest in this part of the project. I kept spending time on the engine details and, for whatever reason, the front wing. Considering how these details would have had to be cut back to add a suspension, I'm happy with the direction I settled on. Eventually it came together, and I'm happy with how it turned out. (I'm trying new photo setup, and still have some kinks to work out) The engine cover is removable, and the front and rear wing are easily removable. I think it pays homage to the original 8440 well, but you can see the comparison below, and the final new over old overlay render (I really love these). A video to show off the few features of the build, and one of those fun little speed render builds. Enjoy. Finally, I have made free PDF instructions which you may find at Rebrickable.com. I'm trying to keep most of my builds free, so I hope you are able to enjoy them. It's an easy build with common parts, so if you need to scratch your nostalgia itch, go crazy. I'll take requests for other old sets to build, so let me know what I should do next. -
Hi Guys, Here to share my RC MODs and MOCs, wish you like them. Please comment below. Thanks! https://rebrickable.com/users/WW Bricks Studio/mocs/ [Full RC] LEGO Technic 42143 Ferrari Daytona SP3 Power functions -BuWizz 3.0 x1 -Driving: PF XL motor x2 -Steering: PF Servo motor x1 - Doors: PU M motor x2 - Engine cover: PU M motor x1 [RC] LEGO Technic 42141 McLaren F1 + 1 BuWizz 3 + 2 BuWizz Motors + 1 PU L Motor [RC] LEGO Technic 42130 BMW M 1000 RR controlled by BuWizz App [RC] LEGO Technic 42125 Ferrari 488 GTE + 1 BuWizz 3 + 2 BuWizz Motors + 1 PU L Motor [Full RC] LEGO Technic 42115 + BuWizz 3.0 / BuWizz motor / PU L & M motor [RC] LEGO Technic 42115 Lamborghini Sian with BuWizz 2.0 [Full RC] LEGO Technic 42110 + 1 BuWizz 3 + 2 BuWizz Motors + 2 PU L Motors [RC] LEGO Technic 42110 RC Land Rover Defender with BuWizz 2.0 [RC] LEGO Technic 42083 + BuWizz 3.0 / BuWizz motor / PU L motor [RC] LEGO Technic 42083 Bugatti Chiron with BuWizz 2.0 My alternative F1 MOCs were made by 42083/42110/42115, [MOC] LEGO Technic 42125 Ferrari F1 Car [RC] LEGO Technic 42115 RC Lamborghini F1 car -
Cute and Compact F1 Car - Pull back engine - 179 parts - 16cm X 10cm X 8cm - 174 gram I share it here - https://www.buymeacoffee.com/zumaidi/cute-compact-f1-car Thanks for your support.
-
From promobricks.de: All Formula 1 fans can look forward to a new car in March. This consists of 1431 parts and should cost 179.99 euros. It is not yet known which racing team the car comes from. It seems most likely to us that LEGO will enter into a partnership with the current all-time favorite Mercedes or the no less legendary Ferrari. Due to the release date, however, it should be certain that the bolide will be based on the design of the coming 2022 season. Set number: 42141 Number of parts: 1431 Release date: March 01, 2022 Recommended age: 18+ RRP: 179.99 euros -
Hello everyone! Maybe it's too early, but let it happen. What do you think of the Speed Champions series in 2022? Do you think it will disappear or continue, or will it be under a different name? Anyway, personally, I think they will stay with us for a long time (after all, they have made specially new wheels for 2021). It seems to me that there is a good chance to see in 2022 in the SC series such cars: - BMW M8 (maybe GTE) - Pagani Zonda or Huayra - Ferrari - some F1 car - due to Toyota license can Toyota gr010 (hypercar) - maybe some cars from the DTM or VASC series Post comments about what you think.
-
Good Day. Today I present to you an alternative model built from Bruno Jenson's italian supercar - F1 racecar in 1/8 scale. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Functions: -RC drive (2x L-motor) -> 1:1.191 gear ratio (20z/12z ; 20z/differential) -RC steering (servo) -pushrod rear suspension -independent double wishbone front suspension -working steering wheel -V8 with moving pistons ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- General sizing was taken from Ferrari F2007, with design inspired from different F1 racecars from 2000s and 2010s era. Originally the idea was to use a 2 speed gearbox to have a low speed with better torque and a higher top speed, however after trying out several variations, it proved to be unrealiable when cramped into a little space, and invaded into the driver's compartment too much. First part of the design was the rear pushrod axle, which is a first for me, and the end result works decently enough. Then the front axle was made, where due to lack of personal ability a compromise on suspension had to be made in favour of the servo, so the springs were mounted in-between the wishbones. A negative effect of that is that the car sat too high, and the travel was physically reduced, so the spring are constantly compressed. Next step was the conjunction of the rear&front axles, followed by bodywork. Initially the intention was to make it all red, using white on the rear wing, but after using a 3x11 curved panel upfront, it seemed almost a must to try and make a stripe (sort of a nod to the original set). Unfortunately there's only 1 of those curved panels included in white, so the air intake ended up all red except for the vertical stabiliser. For the leftovers: I'd say about 1/4-1/5 of the total parts, mostly black beams and all sorts of small connectors&gears, the volume of this car is much smaller than the supercar, and it is much simpler inside. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Find attached below a video (sorry for flashy thumbnail ) and more photos. Instructions (step-by-step photo sequence) are being made. ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- Brickshelf gallery: https://brickshelf.com/cgi-bin/gallery.cgi?f=582869 Thanks for reading, C&C welcome! -
Hi everyone! Looks like I'm (finally) back to do something here. Last months have been quite messy, and a new quarantine here didn't help for sure. BTW, here I want to show you my 2nd Lego F1 creation with custom stickers: the 2005 Renault R25 First of two title-winning cars (in 2005 & 2006), the Renault R25 won the first race of the season in Australia with Giancarlo Fisichella and, several races after, gave Fernando Alonso his first F1 title. This car also marks the end of a Ferrari rule in F1 lasted 5 years, from 1999 to 2004. R25 With Decals - Bricksafe Thoughts? Let me know
-
When I was cleaning up my working place today I rediscovered one of my very early mocs, a Ferrari F2002. The scale is about 1/12 and by today's standards you have to describe its look as very vintage: looks of studs exposed, countless illegal building techniques and some parts in wrong colours because I could not just order them on bricklink. But there is one part of the build I am still proud of today: the (not working) rigid suspensions. It is very funny how things can change in about a decade. I hope you like it. http://Ferrari F2002-3 by klingen_guru, auf Flickr http://Ferrari F2002-2 by klingen_guru, auf Flickr http://Ferrari F2002-1 by klingen_guru, auf Flickr http://Ferrari F2002-5 by klingen_guru, auf Flickr
