Search the Community
Showing results for tags 'dozer'.
Found 10 results
-
Liebherr PR776 Dozer - Lego Technic 42100 alternate model
eric trax posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
The idea for the B model in the form of the Liebherr PR776 appeared in December 2019. Unfortunately, I had no experience building alternative models, so first I assembled a simpler model - skid skidder based on Bobcat T870. Having already some experience and, what is important, knowing what I can afford during the build, especially the list of parts, I made it. I tried to make all the functions and as much as possible to make the original look like this The tactic I chose when designing was to check whether the new engines and hubs would fit in the 1:18 scale model (scale to the wheels). In fact, when I put the first hub between the tracks and the drive motors, I ran out of space in the chassis. Another problem was the new, long actuators. While they are great for lifting the blade, they are too long for the ripper. In the original, these actuators are very short. To keep the dimensions of the ripper I had to build them much more into the center of the model. This added another space problems and the need to place one of the engines at the bottom of the frame. I really wanted the model to resemble the original as much as possible, so I started building with modeling the hood. Then I took care of the blade, which consumed almost all DBG system bricks. However, the basic curvature was pretty nice. Its appearance gives a lot of visual effect. The problem was the shape of the cabin. I don't know who designed the original, but there is a suspicion that he was drunk. Fortunately, it was possible to create a quite realistic cabin and interior. It is masochism to use the Control + system on models of this scale. How to build in two large hubs so that you can replace the batteries from the bottom and turn them on from the top? The first hub is located under the hood between the tracks. From the bottom we have access to the battery and we activate it with a clever switch in - the left platform. The second hub is located directly under the cabin. This can be easily folded back to gives access to the control hub and turn it on using a switch in the cabin The model does not have a realistic suspension. I resigned from it because the model weighs over 3 kilograms. I really wanted it to be stable and the tracks did not make such terrible sounds as the model A while driving. There are, however, four tilt carts that make it easier to climb over obstacles. Some technical data: Length: 46 cm, Width: 25 cm, Height: 23 cm, Weight: 3.04 kg Drive and steering – 2x XLarge C+ motor Ripper – lift (Large C+ motor) tilt (Large C+ motor) Blade – lift (XL C+ motor), tilt (Large C+ motor) I wanted the application configuration to be as simple as possible, so I also created a custom profile in the buwizz application which greatly simplifies the configuration of the model control. I also made a layout to make the control panel pleasing to the eye. Instructions can be bought at Sellfy and Rebrickable: https://sellfy.com/m1longer/p/42100-dozer/ https://rebrickable.com/mocs/MOC-51120/M_longer/42100-liebherr-pr-776-dozer/ Custom stickers: https://www.mocsmarket.com/lego-mocs/lego-sticker-set-for-liebherr-776-dozer-42100-b-model/ Download custom BuWizz profile: https://cutt.ly/kfx57he -
[MOC] Caterpillar D10T Dozer (with instructions)
keymaker posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hi, I present my newest creation – tracked Dozer Caterpillar D10T. I decided to go for old technic models style – without panels, frame construction. I like to see working mechanisms, the guts/insides (not sure which word should I use in this sentence, native English guys, please help me out :D) of the model. Here you have some photos, video will be available soon. I hope you like it Details: scale 1:17 length: 40 cm, width: 26 cm, height: 23 cm, weight: 1.65 kg drive – XL motor smooth steering thanks to subtractor – L motor ripper, raising and lowering – M motor ripper tilting - manual blade, raising and lowering – L motor blade tilting - manual tensioners for both tracks individual suspension for non-driven wheels working, fake, chain driven V8 engine openable doors locked tools compartment detailed engine bay and operator cabin Additionally: model in scale of technic figure power source – buwizz can be easily switched for battery box and two IR receivers model can rise itself above the ground with ripper and blade Instructions: https://rebrickable.com/mocs/MOC-59916/keymaker/tracked-dozer-caterpillar-d10t-rc/#details Video of upgraded version: Photos, before upgrade (more you can find here: https://bricksafe.com/pages/keymaker/6.-dozer-caterpillar-d10): -
LEGO Technic set - 42071 Dozer Compactor / Articulated Truck - Unboxing & Stop Motion Build
BrickTechnique posted a topic in Brick Flicks & Comics
Check out my new LEGO set video – LEGO Technic – 42071 Dozer Compactor. Please Subscribe to my Youtube channel and be the first to see new LEGO toys videos!- 1 reply
-
- lego 2018
- stop motion
-
(and 4 more)
Tagged with:
-
[TC10] Concept Dozer
Thirdwigg posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
It's time for me to submit an entry for the TC10 contest. After toying with a lot of ideas, the idea of a concept bulldozer was the one I gravitated to. I had a lot of fun coming up with the esthetics. Hope you enjoy as well. Features: Power Functions Pneumatic Pump Blade Lift (2 Pneumatic Rams) Blade Tilt/Angle (2 Pneumatic Rams) Hood Opening (1 Pneumatic Ram) Ripper (1 Pneumatic Ram) Opening Driver Door 16 Cylinder Engine I'll post the video soon. -
Bull Caterpillar D6N
juGSI16V posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, Here is my last Moc, a Bull CAT D6N same as this: I want to design it, the most compact dozer full RC, because i want to push Duplo of my daughter, to group them on the carpet. - 1 XL motor for the front --> worm and 8t. - 1 M motor for the rear --> 8t/24t --> worm/8t --> liftarms. - 1 M motor for every caterpillar --> 8t/24t --> sprocket. Later: Implementation of Stickers home-made "CAT" A vidéo coming soon. -
[WIP] Komatsu Dozer
Alasdair Ryan posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
I started this some time ago, it is slow going but I am getting there. I wanted to use the new pneumatic elements too good use so I started on a compact dozer (Komatsu of course). I fitted one side of the track frames properly today,but looking at it I think I going to move the servos down about three studs so I can get a nice angle for the bonnet. (Click for bigger size) You may also notice I have added two drive speeds and a port for a small ripper at the back. -
OK, This baby I really liked, when I finished him. It was in time, I still hadn't the IR. So all functions was done only using the sticks from cabine. It was at the same time I have seen similar idea at one MOC Lego excavator form one guy on TechnicBricks. But my was done completely on my way. I have to say not so tricky as on that excavator, but it worked well. Here are the pictures: http://1filip.rajce.idnes.cz/LEGO_BULDOZER_V02/ video:
-
Location: D04 - Terrial Minor Tags: MANTIS, piracy, vehicle Job: Driver Start Log: After a rather uneventful mission on C04, I got another more exciting assignment: capturing some Kawashita vehicles and equipment. I even had the help of the drones I'd previously confiscated from Octan hands, though now they have a much more suitable paint job. They were pretty thrilled to receive an actual combat mission, and get to drive some sweet new MANTIS rigs: The MANTIS bulldozer/tank features a spinning cockpit, and opening cargo bay; the MANTIS hovercraft features hinging sections, the MANTIS motorcycle features an opening rollcage; and the Kawashita cargo truck features a working tailgate. See more pictures here: http://www.brickbuilt.org/?p=1999
-
I am building a new MOC, and it is a bulldozer. The main base was the tracks for 8043 and I was using about 75% of 8043 parts to build it. It is still not done, just needs some cosmetic work. And there is no ripper( didn't plan on putting one on anyway.)I would post photos, but I have absolutely no clue how to do that. Any help would be appreciative.
-
Effe's D11 pneumatic version
Cyclotron102 posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, I like Efferman's Cat D11 so I'm going to make it pneumatic i modified the inside, remove the gearing, there will be a small pneumatic pump at the moment I'm here: