Search the Community
Showing results for tags 'c-model'.
Found 67 results
-
Yes, another C-model of the 42078 set In the last 3 months I enjoyed my spare time in building a C-model of the 42078 Mack Anthem. My truck is an 8x4 flatbed version, with foldable crane behind the cab. I worked a lot on the cab shape, as already mentioned in @grego18f topic, who was building a Volvo FH too! It has opening doors but no tilting cab and no fake engine (I preferred a better looking cab than changing the shape to let the cab tilt). The crane is functional (all functions are manual), knobs are on both sides of the model. Main problem is the absence of the turntable. The crane is quite stable, but of course cannot load heavy loads. You can of course mod it adding a small turntable Outriggers control knob is on the back: I added 2 attachments: fake hook with chains, to move a small container, and forklift to move small pallets. Video: Model consists of around 1500 parts (so you have around 1000 leftover parts - mostly small parts and Lego System bricks). Instructions can be found on rebrickable: https://rebrickable.com/mocs/MOC-34643/technicprojects/volvo-crane-truck Stickers are custom made and could be available for purchase soon. I hope you like it!
-
I just found another great model made of 42078 "Mack Anthem" set by @MrTekneex, a well-known C-models maker: The features are: Tilting cabin Openable doors HOG steering with working steering wheel (ahh, another cabover truck with tilting cabin and working steering wheel ) Working 6L engine Rear "doubles" at the driven 2nd axle Front and 3rd axles steering The 3rd axle is also liftable (has no steering in the raised position) Roll-off and landing / loading the container in three steps, each is driven by its own LA (or rack+housing) Dump the container Locable door of the container So far it's only on this website, so hopefully, it might appear at the Rebribale as well...
-
Hi all, This topic is for discussion of the new C-Model Index (under construction here), and for suggestions of C-Models for inclusion. I hope the index will help us all keep track of the great C-Models people have created, and in many cases, their instructions. I've managed to find a good collection to get started, but no doubt I will have missed some, so please tell me any you'd like to see added (or any mistakes/missing details/etc), and I'll add them in future updates. Rules for inclusion: Uses parts from only one set; That's about it! Where possible, I'll list details of EB topic, youtube video, instructions, and part count. Models detailed on EB are obviously favoured, but I've already come across one or two from elsewhere which I feel deserve to be included. They are listed in no particular order. Where individuals have listed their creations as C-Model, D-Model, etc, I have ignored this and called them all C-Models, because each designer's classification doesn't work when all compiled together. To keep this manageable, I'm going to try and release these in groups according to the original set. To start with, here's all the C-Models I have managed to round up for the set that got me out of my dark age - and perhaps its no surprise, given the sheer number of useful parts: [EDIT: moved 42009 into the index.] Hope this is useful - suggestions welcome. Jo
-
I got Yoda's Jedi Starfighter a while ago as a gift from a friend. I normally make c-models of Technic sets, so initially I wasn't sure what to do with this after building the main model (other than a Tulip!). This set has a range of Technic pieces so it was familiar but also a nice change. There no ball joints that are usually associated with Lego mechs but I thought I could still manage a range of motions. I built the frame first using the Technic pieces before adding the decoration. In the end I managed to create knee, hip and shoulder joints and the model is reasonably stable and pose-able. The Mech is equipped with missile launchers, force blasters and can transform into a flying mode, allowing Yoda to soar over rough terrain. It can crouch down for easy access to the cockpit.I quickly settled on the design for the feet and arms which shaped the way the build turned out. The knee and hip joints were revised a couple of times before settling on the current version. The wings are actually an important part of the model to ensure it remains balanced. More details and instructions: https://rebrickable.com/mocs/MOC-29490/thekitchenscientist/yodas-mech/
-
[MOC] C-models of one set based on A-models of another
thekitchenscientist posted a topic in LEGO Technic and Model Team
I'd like to share with a quartet of c-models which are based on A-models from 2018-19. There has been no model since the Racing Yacht and Heavy Duty Forklift that had that special something to make me want to buy it (the Car Transporter came very close). I typically stick to buying the low/mid range sets and now have around 20. I enjoy the challenge of C-model creation as you can see on bricksafe, and using Rebrickable.com I looked at which of the 2018-19 line-up I could enjoy the building experience for using bricks from my existing sets. I initially was going to make the First Responder from the Airport Rescue Vehicle but the similarities with the B-model for this set ruled it out. Turning the Racing Yacht into the Powerboat was a logical next step. I tried to follow the instructions for 42089 making substitutions and skipping sections as required. Once that was done, I went back over the model with the remaining pieces to try and find a way to complete it whilst keeping the vibe of the parent model. This process made me very familiar with the instructions for 42089 such that I tried again with the Heavy Lift Helicopter and Airport Rescue Vehicle. Having woken up my brain to the possibilities, I went back to Rebrickable.com to look for a bigger challenge. Comments in reviews about the chassis for the Rally Racer put me onto the 24 Hours Race Car being a good candidate. This followed the same basic process as before but this time need much bigger reworks. I often realised the piece I really need to complete the bodywork of the model had been used elsewhere in the chassis, and a swap would be needed. I'm pretty pleased with the outcome. This idea of recreating an A-model as a C-model is not new (https://rebrickable.com/users/klimax/mocs/ has a number of examples). More pictures of each model can be found on Bricksafe (https://bricksafe.com/pages/TheKitchenScientist). This version of the Rally Car has kept the suspension and HOG steering but lost the opening front/rear. I managed to add steering via the steering wheel. The brick built 3-cylinder engine is not linked to the wheels but turns with the propeller. Using a worm gear I was able to link the propeller to the wheels but there was no engine this time. This model had all the parts to recreate the engine/wheels/propeller functionality but lacked some of the panels needed to keep it power-boaty. As a compromise I took the arm mechanism from the Airport Rescue Vehicle and mounted in the extended boat. -
Let me introduce myself and tell you something about this new topic. Some of you may know me in connection with modification of alternative model from set 8052. I modified it into truck with work platform last summer and provided you building instruction via brickshelf. It is not my only creation so I decided to share my other creations with you too. One more note before introducing my models – I am focused on building models from one set so they could be named as “unofficial alternative models”. It’s enough about me and let’s look at what I have for you now! This is truck with work platform I spoke about above. My latest creation is “telehandler” also from set 8052. Honestly it doesn’t have telescopic boom but at least it looks like it has... :) It features following functions: lifting boom via linear actuator and medium motor with gear ratio 1:3 (it is as slow as lifting container in main model) rear axle steering with eccentric control via beacon on roof of cabin – this was little puzzle because lack of bevel gears front stabilizers which are able to lift front wheels little bit above land adjustable rear mirror (I like especially that one on side of battery box)
-
[C-MODEL] 42088: Spaceship, Jet plane, Race car
desert752 posted a topic in LEGO Technic and Model Team
Hi! I had a few rainy days in the village, and today I'd like to show three c-models of 42088 Cherry Picker set. 1. Spaceship with foldable supports, engines, guns and one nuclear missile :) 2. Jet plane with changeable wings angle. 3. Race car (no additional functions) You can watch short review with subtitles. In the video description I've placed links to building instructions: Thanks for watching! -
It's about a time, since I've been ended my dark ages and now it looks like my way will be rather smaller attempts and "projects", then bigger and more sophisticated ones. My older builds had their own topics here and here, but I don't think that all of my next builds will be suitable for separate topics, so I decided to make this one, where I have intention to add all of my publishable builds. And for the beginning, here is my wip small manual buggy. Buggies are favourite Technic builds, there are many of them in all sizes, shapes and qualities. This one is intended to be small and simple, all manualy working. Now it has front and rear suspesion, openable cabin, steering and rear wheels conected to fake engine. I'd like to improve rear axle suspension, add HOG and steering wheel and some details here and there. And finaly adjust color scheme, although I'm not very disturbed with this clor vomit in this type of vehicle.
-
So it's been a long time since I've done any building that wasn't an out-of-the-box set, and I quite liked the challenge of the C-Model contest from a while back (TC5 was it?), so I figured that was where I'd pick up... When I first saw images of 42038, I figured that it would probably have a snow groomer as its B-model. We got something different instead, which was great, but I decided to have a bash at a snow groomer myself anyway. I tried to get as much functionality as possible, at least similar to what the real thing might have. Features are: The front blade can be raised and lowered with a mini LA, controlled via the 2-point gearbox behind the cab The rear blade can be raised and lowered with a mini LA, controlled via the 2-point gearbox The front blade can be tilted left and right from a control behind the cab An extendable winch, which can rotate 360 degrees via the control at the back On with the gratuitous photos: Front and rear blades raised. The controls. The nearest operates the gearbox, while the middle tilts the front blade. The front blade raise and tilt mechanism. The rear blade in the lowered position. The winch controls. All photos available in full size on my Flickr. Hope you all like it
-
The C-Model of notorious 42039 24 Hour Race Car. Just like Bootleg Belle, the idea here was to build an oversized desert truck. While Belle goes with hot rod styling, Dream is a pickup truck that someone carved up to extreme extent, installed an oversized and boosted V8 in the back, topped it with preposterous wing and thus fashioned a beast to dominate any desert. It looks angry and ridiculous, because that's how I felt while building it - my girlfriend was reading a particularly bad - yet published by a renowned publishing house! - novel aloud while I was building Features: ► V8 engine with moving pistons and twin "procharger" pulleys, ribbed hose headers and two exhausts, connected to rigid transmission with differential ► radiator with cap & hood intercooler intake ► individual front wishbone suspension & rear live Hotchkiss drive (dragged axle) with integrated bumper ► steering connected to HOG ► opening doors ► cockpit with a (non-functioning) steering wheel, dashboard and seats ► oversized rear wing, rear view mirrors, front lights, reverse lights and stop lights, two side fuel tanks with caps
-
My girlfriend gave me the 4260 Road Work Crew for the holidays (you can see her present in the back of the pictures). I thought it'd be fun to have a go at building a C-Model. I grew up in a rural community and combine harvesters were a common sight in my youth. Without further ado, this is the result: The model has the following functionality: The mower drives the conveyor The conveyor almost reaches the hopper The hopper can be disconnected Rear-wheel steering The model is more fragile than I would have liked but this is the best I could manage with the limited part selection. The colours, stickers and the anniversary brick work out quite nicely. Some more pictures can be found in the Instagram post.
-
Hi, all, After lurking around the forum for a bit, I decided it was time to post my first MOC. This is a Star Destroyer, made from the parts in 42028 Bulldozer set. Overview: I started this MOC while experimenting with different frames and connections between parts. After some trial and error, I created a triangular frame with the sides bent in. Having just seen The Last Jedi, I was obsessed with all things Star Wars and decided to attempt an ambitious build for my low skill level- a Star Destroyer. Given that I am not the kind of person who likes to mix their sets together, I eventually settled on the 42028 set to create this MOC from- not only because the low parts count would provide a challenge, but also it would be kind of fun to see a yellow... Banana Destroyer? The frame was primarily constructed of beams and perpendicular connectors: (Note that this construction, while fitting together properly, created some stress on the parts- portions of the front push each other a bit owing to the tightness of the frame. But it's the best solution I could find given the space/ parts available. ) After that was complete, I built the engines and the distinctive cabin and attached them: Features: Authentic body shape Posable turbolasers Built entirely from parts in 42028 Bulldozer set Detailed engines and cabin More Pictures: I hope you enjoyed my MOC! Thank you for stopping by, and I appreciate all feedback, comments, and suggestions! Regards, Magical Duck
-
Hi, I made a C-Model for the 42048 Kart :) It features a Formula 1 with working direction (controlled by HOG) and a fake engine with two gears (which can be switched from the back). The hood can be opened. There are also two exhausts and a position light in the back. It is quite fun to play with and the steering radius is much better than the one of A-model :) Here are a few pictures: The HOG is in place of the steering wheel (small yellow part). Steering mechanism is similar to B-Model, but more flat (it is only 1 stud high). The gear box is taken from A-Model and features the same ratios. The switch is on the back however (could not really put it in the cockpit :p ). Any comment welcome ! Will post instructions on rebrickable as soon as possible.
-
I'm not sure if this MOC belongs in the Technic or Star Wars forum, but I'll post it here and let the moderators decide. I recently picked up set # 75532, Star Wars Scout Trooper & Speeder Bike. It's a very nice set, but has no alternate build, so I made a C-Model (or B, I suppose) out of it. Here is what the original looks like: Endor Walker I built a Star Wars-themed walker as the alternate model: Functions: Opening cabin Tilting cabin Pivoting feet and legs Features: Cabin with seat Twin cannons Turbine engine under cabin The legs and feet can be set in many different poses, with each of them moving independently. The cabin can tilt once the legs are in place, allowing the aiming of cannons. Here are some more pictures: Inside the cabin is a seat: Rear section:
-
I would like to present my latest MOC. This is a claw loader C model of set 42075. This has been built using only the pieces from this set. It features: - Hand of God (HOG) steering via the knob on the top of the cabin roof. - Front arm lifting via the black leaver in front of the cabin. This also has a lock to keep it in place. This is required as due to a lack of LA's and no worm gear included, it would not stay in place as it went up. - Manual claw opening, this uses the shock absorber to close it. I had built a winch for the rear but this didn't look "right" so I took it off. You can see in the last photo the parts which were left over after I finished this. I spent about 7 hours over the past few nights building this. I had to go back a few times and change parts used as I needed them for another parts of the model. My building process was: Chassis Lifting arm Cabin Body work Overall I am happy with how it worked out, it ended up better than I was expecting. More photos here: http://paulstechnic.blogspot.com.au/2018/03/moc-c-model-of-42075-claw-loader.html
-
1970 Porsche Can Am - 42077 C-Model + Instructions
Lox Lego posted a topic in LEGO Technic and Model Team
After a grueling 10 hour dual build with my Brother Dugald, we have successfully completed a proper C-Model for the 42077 Lego Rally car. The car can have all the motors easily removed and an HOG steering can been added for a proper C-model. We managed to create completely new suspension, most notably the front suspension tuned in by none other that @DugaldIC with Ackerman steering :) This video was filmed with a Buwizz 2.0, 1 M-motor for drive that powers boxer V6 and servo. This build uses 100% of the parts from the rally car. (with option of adding or removing motors) Rebrickable: https://rebrickable.com/mocs/MOC-12233/Loxlego/1970-porsche-can-am-42077-rally-car-c-model/#parts 1970 Porsche Can Am by lachlan cameron, on Flickr 1970 Porsche Can Am by lachlan cameron, on Flickr 1970 Porsche Can Am by lachlan cameron, on Flickr 1970 Porsche Can Am by lachlan cameron, on Flickr Inspiration: 1970 Porsche Can Am - inspiration by lachlan cameron, on Flickr -
[C-model] 42055 D model-Supercar with test stand
msk6003 posted a topic in LEGO Technic and Model Team
Hello! msk here. This model is my second 42055 C model so I named D model. First here. Harftrack vehicle with rubber band gun. I can't write long so let's start. Conneced car with stand. Don't have any physical connection so can disconnect easly. Just lifting car using hand. Car function 1. 6 speed gearbox 2. custom-made differencial gear 3. openable trunk 4. working inline-4-engine 5. openable bonet and working cooling fan 6. working steering wheel Stand function 1. 2-speed motorise wheel roller 2. HOG steering tester Now what? INSTRUCTION! * My all instruction is LDD-photo sequence. What is this? Watch my instruction. Sorry. Example here. Engine cam part. -
Finally, I got myself to build a 42050 C-Model out of the second set I bought purely because I liked the A-Model too much to tear it apart. Had some general ideas, but couldn't decide between a Hot Rod and Dragster, so I built both in one package. It has a hidden function of "adjusting the stance" which is purely for style and, if exaggerated, makes the car, uh, "un-dragable", but some moderate amounts of adjustment make for nice change of style. Features: ► V8 engine with moving pistons ► twin carb adorned with velocity stacks + hood tach ► radiator + cooling system + front lights ► ribbed hose headers and dragster-style Zoomie exhausts ► rigid transmission w/o differential ► steering connected to HOG ► cockpit with a (non-functioning) steering wheel, dashboard and gear shifter ► adjustable "stance" ► wheelie bar (adjusted with stance) ►namesake "Lightning Rods" in the back of cockpit for decorative purposes
-
LEGO TECHNIC C-MODEL INDEX ***Index under construction - please add your suggestions and comments to the C-Model Index Discussion topic here, rather than commenting on this topic. This is a (slow!) work in progress, so please be patient *** Welcome to the C-Model Index! It aims to help you answer the question: "I've got set (X)XXXX - what can I build with it?" (or "I can't bear to mix up my sets' parts", or "I only want to take apart one model at a time" ). Missing a great C-model? Broken link? Wrong info? Let me know in the discussion topic. There have been some excellent alternate builds or C-Models showing up lately. I'm a big fan of these, as they open up new opportunities for those of us without a huge collection of spare parts, and in my view every one increases the value of the set in question. It's obviously a big challenge for the designer to work from a restricted pool of parts, and it's clear that certain sets lend themselves well to alternate builds. I also get frustrated when I come across a great C-Model topic, which I then can't find again later. So as my small contribution to EB, here is what I hope might become the definitive C-Model index, helping us all keep track of these great models, and in many cases, their instructions. Rules for inclusion: Uses parts from only one set; That's about it! Index structure: taking into account the useful suggestions of other eurobrickers, I've decided on the following structure: An index of sets is further down this first post (organised by date and set number); Each set will have its own post below. This keeps the index organised by set, so that all the C-Models for a given set are kept together; Each set's post includes, where known, the details of EB topic, youtube video, instructions, and part count; Sets' posts are listed in no particular order - use the links in this index post to find the set you want; If a set number doesn't appear in the list, it's because either A) no C-Models exist yet (in which case go and design one!), or B) I haven't found them (in which case point me towards it by commenting in the discussion topic); C-Models are listed in no particular order. Where individuals have listed their creations as C-Model, D-Model, etc, I have ignored this and called them all C-Models, because each designer's classification doesn't work when all compiled together; Part counts are taken for a variety of sources, and may therefore not quite match up (and can lead to percentages over 100%, for example); Limits on the number of media files per post means some (42039, I'm looking at you!) are split up into multiple posts. 2016 42055 Bucket Wheel Excavator (5) [New] 42054 CLAAS XERION 5000 TRAC VC (7) [New] 42053 Volvo EW160E (1) [New] 42052 Heavy Lift Helicopter (2) [New] 42048 Race Kart (4) [New] 42045 Hydroplane Racer (1) 2015 42043 Mercedes-Benz Arocs 3245 (5) 42042 Crawler Crane (6) 42039 24 Hours Race Car part 1 / part 2 (15) [Updated] 42038 Arctic Truck (8) [Updated] 42037 Formula Off-Roader (1) 42036 Street Motorcycle (3) 42035 Mining Truck (3) 2014 42025 Cargo Plane (4) 42024 Container Truck (7) 42022 Hot Rod (3) 42021 Snowmobile (2) 42020 Twin Rotor Helicopter (3) 2013 42010 Off-road Racer (1) 42009 Mobile Crane MKII (8) 42008 Service Truck (4) 42000 Grand Prix Racer (8) 2012 9398 4x4 Crawler (6)
-
This is my first "published" c-model. It took me the last 2-3 weeks in total to build it. It was one of the reasons, why i paused on my speed-racer :) When my daughter (5) baught this model (42065 Tracked Racer), she wanted a lego rc car wich she could play with. But since the steering with the 2 tracks is pretty complicated and too hard for her, i decided to build a model with a regular steering from the set. I was thinking about building a halftracked vehicle at first, but then i decided to build a snowmobile. It was a really hard way, because of really limited amount of parts in this set (369) and the fact, that there is not a single gear included in the set . All in all i think i totally rebuildet the model 3-4 times until the current result. I still dont like it 100%, but its ok to play with for my daughter, and i need time for my own project again :) What funtions does it have?: - PF drive + steering - pendular front suspension - working handlebar (can be used as HOG) - virtual "differential" aka linear clutch at the rear axle for better steering. Motor drives left side front of the tracks, right side is connected with the clutch at the rear axle. - seat acts as PF-on-switch. A driver sitting down on it will move the battery-box to "on"-position :) -> you can see it in the video Here you can see the linear clutch in the middle of the "rear axle" footrests size comparision leftover parts Technically the chassis idea is based on something like this.
-
[C-MODEL] 42055 BWE E model-bucket wheel carousel
msk6003 posted a topic in LEGO Technic and Model Team
Hi! Another C model of BWE. This time, I use banana gear for real gear.(C of harftrack don't use that, D of supercar use only mudgard.) I don't have design sense, so use bucket for horse(or something vehicle)in carousel. Like I did in C and D, instruction will soon. -
Hi there, after thinking a while about a possible c-model I found one that needed just about two hours... the main idea was to build a smaller sized version of the dump truck which is included in the 42055 set (very similar to the 42035). The dump truck runs in a double wheel made of eight annular gear quarters. It is driven by the XL motor. The big wheel can rotate in both directions, so the little truck will drive either uphill or downhill - just like a hamster in his wheel. That's all. No gearbox, no gimmicks, no intricate mechanisms. Just for fun... might be a rate of about 3 % of the 3,900 parts... so there are enough spare parts for some more modifications and additions ;-) (maybe a gear box after all, or a more sophisticated array for the counterweight). http://www.brickshelf.com/cgi-bin/gallery.cgi?f=569964 (One of the biggest challenges in this c-model was the fact that there are only three tan-coloured axle pins - but the truck needs four wheels. So I used a dark red 3L axle with stop for the rear wheel on the right side (not visible on the pictures). ;-)
-
[C-Models] Trio of pull back racers plus Motorcycles with sidecars
thekitchenscientist posted a topic in LEGO Technic and Model Team
Here in the UK we have a bank holiday coming up. In case you were looking for something to build, I have recently finished creating 4 C-models from sets 42026, 42046, 42011 & 42060. The first two were inspired by set 42010 (dirt racer), the second by the record breaker pull back and the pair of motorcycles by the double snap with hole which reminded me of the front forks of a motorcycle. As I've disassembled the models I've taken pictures so you can build them yourselves. Visual instructions are on bricksafe. -
For the C-model contest I figured I'd have a shot at doing something with 8049, as of all the sets I have in the parts range, this is one of the few with a useable number of the same wheel type (amongst other reasons). This is just a quick sketch built in LDD, a Logging Loader. Its functions are: Pneumatic lifting of the two-stage crane arm Worm screw operated claw Crane rotation via the light on the cabin roof Two-stage steering via the exhaust stack - this articulates the body of the vehicle while simultaneously steering a rack-and-pinion mechanism on the middle axle, so all three axles are at a different angle Pendular suspension on the rear axle Working with pneumatics in LDD is a bit of a pain, to put it lightly. I'm not sure about the positioning of those elements as yet on the crane arm, but adjusting them will be easy enough when I build it with bricks. It uses about 400 parts at a rough guess, the pneumatics parts here are made of multiple parts so distort the true part count.
-
[C-Model] 42060 Orbit Mechanism Ideas? (Swing-out Bot)
thekitchenscientist posted a topic in LEGO Technic and Model Team
I was recently given a 42060 road work crew set with the challenge to build something dancing related with it. The Swing-out is a staple of the Lindy hop dance style. It basically resembles a highly eccentric orbit like a comet, where the follow comes from arms length to close to the lead, is turned about and then moves away again (this can be repeated until either party has had enough). My question is what is the minimum parts to achieve an 'orbit'. So far my attempts require separate mechanisms for the in-and-out (using the tracks as a conveyor) and the round and round. The set has ample orange parts with which to build the dancers who keep one hand linked the entire move.
