Search the Community

Fate(ful) has smiled on us today, and we now have a list of names, prices, and part-counts for Ninjago’s January 2025 wave! 71823: Kai’s Dragon Spinjitzu / 54 pieces / $10 71824: Sora’s Dragon Spinjitzu / 56 pieces / $10 71826: Dragon Spinjitzu Double Pack / 186 pieces / $20 71827: Zane’s Battle Mech / 92 pieces / $20 71828: Lloyd’s Race Car / 181 pieces / $30 71829: Lloyd’s Forest Dragon / 128 pieces / $20 71830: Kai’s Storm Rider Mech / 333 pieces / $40 71831: Ninja Spinjitzu Temple (4+) / 158 pieces / $40 71833: Ras’ Storm Jet / 510 pieces / $50 71834: Zane’s Ultra Combo Mech / 1187 pieces / $100 71841: Dragonian Storm Village / 305 pieces / $40 It looks like “Dragon Spinjitzu” will be the new gimmick, and possibly a new technique that the Ninja learn in Season 3; Lord Ras survives and continues to be an antagonist (not a surprise, but still a bit of a spoiler), and the villains are storm-themed. Considering that Nokt has blue markings (possibly storm elemental?) and physically resembles the Island Keepers, maybe their species is called “Dragonians” and they (or at least some of them) will return as the villain army in DR S3. 🤔

Just figurered I'd do a lttle breakdown on my purist custom elemental masters from the Serpentine Wars/Battle for all Time. For today I've got young Wu, young Garmadon, Libber, Hibernus, Benton and Dusk. I'll also add the Bricklink part ID's below. I mostly went for outfit accuacry rather than colour accuarcy, I guess you could considers these version to be a legacy interpretation. Wu and Garmadon were fairly easy to put together. I used the black legacy Wu robe as the base and swapped the arms to purple for Garmadon. Using the older Lloyd head for Garmadon was a no brainer. The angry face for Wu isn't perfect, but smile is almost spot on based on the reference image I used. Wu parts: Hair - 62810 tan Head - 3626pb2748 Torso - 973pb3398c01 Legs - 970c00pb0904 Garmadon Parts: Hair - 61183 dark brown Head - 3626pb1035 Torso - 973pb3398c01 swap white arms for purple Legs - 970c00pb0904 Dusk possed a challenge intitally due to her hair piece not existing in the right colour. The robes also gave me some trouble but then it hit me, she's wearing Stass Allie's jedi robes (even the trivia on the wiki doesn't have this fact at the time of writing). To keep the oufit cohesive I omitted any purple colouring and finished off with the princess braided hair in black. The trick for the face was to search brinklink for the best cheekline options, luckily I already had my chosen head in my parts collection. Dusk parts: Hair - 59363 Black Head - 3626pb1830 Torso - 973pb1480c01 swap dark tan arms for tan Legs - 970c02pb10 For Libber I went for the classic option of using Jay's fusion suit. For the head I had wanted to use Claire's head from the Temple of Airjitsu, but since I have that figure I didn't want to create an ''Now there are two of them!'' situation. In the end I settled on the Falconer CMF head for some double sided action. (ignore the crack in her right arm, I promise I'll get it fixed). Libber parts: Hair - 90396 bright light yellow Head - 3626pb3185 Torso - 973pb2613c01 Legs - 970c00pb0630 For Hibernus I was curious to see if the snow guardian CMF torso could work, I also wasn't satisfied with any of the blue robe options. I added some dark blue arms and legs and he was good to go. I also liked this goatee head better than any of the moustache ones. the hair thankfully exists in the correct colour, but only on two figures. Hibernus parts: Hair - 88283 white Head - 3626pb1960 Torso - 973pb4562c01 swap arms for dark blue with white hands Legs - 970c00 dark blue Last up, Benton. As the triva section of the wiki has pointed out he uses Gimli's torso and Aragorn's head from Lord of the Rings. He also uses the legs from the samurai warrior CMF. I stuck with the torso (with it's dark grey arms) and the legs, but I went with the samurai warrior's head as well. To be in keeping with the arms I went with a pearl dark grey version of the helmet. Benton parts: Helmet - 48493 pearl dark grey Head - 3626pb0509 Torso - 973pb1149c01 swap light nougat hands for reddish brown ones Legs - 970c00pb0080 Thanks for scrolling though this wall of text and pictures :)

Hi, this is my second MOC and first Ninjago City module. It’s a 32x32 baseplate with a height of 75 cm (2.5 feet) and a piece count of around 6500. Features: A large, lavish hotel with a "Ninjago Movie-esque" sign written in ninjargon (it simply says "HOTEL") A beach with an ice cream shop and springboard "I ❤️ NC" souvenir stand where you can buy ninja figurines, shirts, plush toys and more Thai restaurant with outdoor seating Air scooter rental (inspired by the jewelry thief from Ninjago City Gardens)

I haven't seen many people talking about the core banners so I figured I'd post this to get the ball rolling. If you line up all the core banners you could make a grand tapestry of some kind. The above example just one version of it. I just felt like hearing other people's thoughts on this. How would you line them up? what other combinations would you make? Should it include the 2x6 stickered banner from Zane's Ice Dragon Creature?

This project was a fun one. Originally I had planned to turn Zane's EVO mech into a Samurai X mech, unfortunately the EVO limb part have yet to be recoloured into dark blue. In the end I took inspiration and parts from the EVO mech, Jay's mech from the battle pack and Zane's mech suit. The mech has all the recognizable parts: the sawblade, arm cannon, jetpack and the folding cockpit. It might not have knees, but I did give it waist rotation. The mech can also strike a good pose. Thanks for checking out my post :)

My next Ninjago build. Here it was again important to retain the charm and appearance of the sets as much as possible (for the recognition of the children) Actually, I wanted to install the whole smithy in the environment, but then I had to dismantle it and partly rebuild it. 20200503_123009 by Fabian Kraus, auf Flickr 20200503_123025 by Fabian Kraus, auf Flickr 20200503_123041 by Fabian Kraus, auf Flickr 20200503_123119 by Fabian Kraus, auf Flickr 20200503_123101 by Fabian Kraus, auf Flickr 20200503_123235 by Fabian Kraus, auf Flickr 20200503_125711 by Fabian Kraus, auf Flickr 20200503_125756 by Fabian Kraus, auf Flickr

In September @MstrOfPppts and I finished our MOC based on the 70620 Ninjago City and 70657 Ninjago Docks sets. I took the photos in December, when it was displayed for the last time, and it took me too long to edit and select the best photos. There are two sections of the city, connected by an old stone bridge at the lowest level. We wanted to create a part of the city similar, yet distinct from the official sets. The ground level was set as a more traditional Asian architecture, while the above level was leaning more towards the modern high rise. The idea was to visualize how the architecture changed at higher levels when buildings were added on, but still to keep some traditional elements. For this purpose we also designed some custom printed parts to create the right atmosphere. From my part, this was the most extensive model I built, and one that I enjoyed building very much. If you're interested to see more details from other angles or just these photos in high-res, they are available at my Flickr.

IMG_20200430_204832 I build this MOC long before the conclusion of the "Hunted"-Season from Ninjago and kinda imagined the Armor being propped up in an old shrine in the middle of rocky wastelands instead of just being placed in the center of a huge dragon`s nest. Oh well, at least it was a reason for me to use that neat raised baseplate from the Bionicles theme. IMG_20200430_204856 IMG_20200430_204856 IMG_20200430_204950 IMG_20200430_205035 More pictures can be found here Leave a comment if you like :D

The small white dragon from the polybag 30547 grew up to be a medium sized slender dragon with snow white scales. IMG_20200430_205720 IMG_20200430_210423 This kind lives in the vast realm of the Oni and Dragons.When grown up, they have long serpent like bodies with short hind legs and winged front legs. Most notable feature might be its long spiny tail with a fire red sharp end.The red color is a warning, they are venomous and use the tail ends like stingers. The Dragonhunters used to catch these dragons to harvest its venom... IMG_20200430_211609 ...but because these dragons are vicious fighters, not every hunt is sucessful... IMG_20200430_212219 by Christian Weber, auf Flickr Find more pictures on this Flickr-Album: https://www.flickr.com/photos/181961255@N06/albums/72157714168092007/with/49855467333/ Hope you like it, leave a comment if you want...

Here are the Ninjas from Ninjago reimagined in a Western setting: Western Ninjago by Jamin Star, on Flickr Western Ninjago by Jamin Star, on Flickr Western Ninjago by Jamin Star, on Flickr Llyod Western Ninjago by Jamin Star, on Flickr Kai Western Ninjago by Jamin Star, on Flickr Nya Western Ninjago by Jamin Star, on Flickr Jay Western Ninjago by Jamin Star, on Flickr Cole Western Ninjago by Jamin Star, on Flickr Zane

I know, a big beefy car sells well as a toy, but sometimes they just look ridiculous imho. That´s why i tried to design a smaller version of the Ninja Tuner Car. And because i had a creative block, i started using Jerry Builds Bricks Cyberpunk 2077 car as a base and modded it a little bit. I wanted to incorporate most of the stickered parts of the original set or at least wanted enough surface to put on the original stickers. I also tried to find a way to use a similar color palette and of course that crazy pink windshield. So, what do you guys think of it? Anything you would change?

Hello dear Lego fans, After having signed up here in the Eurobricks forums in 2011, I posted a new thread in the "Hello my name is..." section about my plans to create my own Lego City layout. Now almost 9 years later, I can finally show you some of the progress that has been made just at the beginning of the new decade :) Good things come to those who wait. Renovations on the attic are finally complete (apart from the lighting) and we now have around 110 m² to unleash our imagination. The current plans of the Lego city layout add up to around 60m² in size and they are, as you can see in the video, far from finished. However, I thought you might be interested in some of the things that my girlfriend and me were designing in the last couple of days. The name of the city is still unknown, but the overall design has started to take shape with a downtown area, which includes all the modulars, and shops, a residential area, an amusement park, a winter village, a train yard and a harbor/beach area. I would also like to add an airport to the city and some of the classic monorail tracks have been placed already. We are also getting into MOC a little bit and we will add our own creations to the layout as soon as they look nice! The commentary of the video is in German, but I am trying to add English subtitles into the system. Please let us know what you think here in the forums or in the comments section of YouTube. I will keep you posted on future updates if you like :) Note: All of the parts used in this layout are original Lego parts, except for some of the baseplates. I thought that lime green in the Hogwarts castle area might look cool, but I will probably exchange it for regular grass green baseplates in the near future. Thank you so much for taking a look! :) Christof

I started my new Theme "NinjagoTRON" After I disassembled a few old Moonbase modules, I started with my Ninjago Theme. This is one of four planed modules. Market street 20200216_160729 by Fabian Kraus, auf Flickr 20200216_160453 by Fabian Kraus, auf Flickr Weapon-shop 20200216_160323 by Fabian Kraus, auf Flickr Vehicle-accessories 20200216_160647 by Fabian Kraus, auf Flickr Outfits 20200216_160533 by Fabian Kraus, auf Flickr Maintenance platform 20200216_160408 by Fabian Kraus, auf Flickr

Here is my general idea Pink Zane Dr. Julien Faith Golden Jay Golden Zane Golden Cole Kataru Grimfax Sorla Human Vex Fenwick Boma Uthaug Fugi-dove Antonia Casual Harumi Emperor of Ninjago Empress of Ninjago Nelson (season 11) Powerless Lloyd

Hello, here is my first Ninjago "MOD" hope you like the small update LEGO Ninjago Stiix 01 by Fabian Kraus, auf Flickr Cute beard from HiddenSide 20191111_233412 by Fabian Kraus, auf Flickr 20191111_233344 by Fabian Kraus, auf Flickr Again from HiddenSide the upper body 20191111_233321 by Fabian Kraus, auf Flickr 20191111_233246 by Fabian Kraus, auf Flickr 20191110_212654 by Fabian Kraus, auf Flickr

The story is I wanted to make one mech for one of my mini figures. But I did not like it, and then I started to think what if "her" friends made some mechs too. And I stared to use my Mixel sets to make the Mechs for other mini figures. I had laying around (or spares). So here their are (a group shot or two)... The individual mechs are... Kappa Mech - Piloted by Leo, technically this might be the second one I made using Glorp Corp Mixels. But the first one I made I was not to happy with and it got remade more on that later. I did think making the limbs bigger / longer but I just settled on making the arms longer. Goblin Mech - Piloted by a Orc, using Spikels Mixels, it looks like some thing a goblin would make. You would noticed that I gave this (and a few others) a "door" to get in and out of the mechs easier. Thunder Mech - Piloted by Jay Walker, useing the Musical Mixels to make this one. I am thinking thunder is a noise and Jay is a lighting ninja it seemed like a good mach. Stitch's Mech - Piloted by Stitch, using Frosticons Mixels. This might be another one I had trouble making at first until I put Stitch as the pilot and then it just came together. The back story on this mech is Stitch got tired of "people" making fun of his size, so he ended up building this thing. Mystical Mech - Piloted by Lance, using Wiztastastics Mixels. I eventually put Lance in this mech wanting to use the first figure in some thing else. And I even put some "Wing Blades" on this mech to make it a little better and give it a slightly different attack than the other mechs. (The others using their "claws" for attacking.) Beetle Mech - Piloted by a Rogue / Archer (from the mini figure collectable series). I used Glowkies Mixels for this thing, putting the "horns" it made me think it look similar to a beetle. I even think the "teeth" holds a type of cannon. Plus this one has an odd way to get in an out of the mech. Snow Owl Mech - Piloted by a Chima Polar Bear. This one is very different from the others because is does not use any Mixels. What I am using is a Nexo Knight's Mech (Lance's) and a Chima Legend Beast (Eagle) plus a Ninjago poly bag (Dragon Hunter). You are probably wondering why I am calling this a "Snow Owl" one of the earlier versions the feet reminded me of a Snow Owl's feet. But I wanted some wings on the mech so I ended up using the Chima Eagle for parts. Plus If you look at one or two of the pictures it is holding a boomerang (from the Dragon Hunter) for a extra attack, along with it's "forearm blades" witch can flip around for a slash attack. Not to mention I was trying to make a mech for this figure I was not to happy with the other versions until this one came about. Also, I kinda figure with a Polar Bear Pilot in an Snow Owl Mech it might make this a feared "Bear Owl" from D&D. A gallery of the individual mechs... http://www.brickshelf.com/cgi-bin/gallery.cgi?f=579327

Hello, I had a desire to make a "classic spaceship". And having 75176 Resistance Transport Pod it looked like a good start to make a spaceship. Then getting 70821 Emmet & Benny's 'Build & Fix' Workshop! And using at least one of my 70841 Benny's Space Squad I have most of the spaceship. But then finding a extra 70660 Spinjitzu Jay for cheap I threw him in to the set. I am saying Jay stoled the spaceship from Benny because Benny was the original pilot. The next thing you are wondering why is it called the "Mini-Beetle" first it kinda looks like a bug, second the inside reminds me of a minivan, and I couldn't think of a better name. Now for the action shot. As you can see the ship has (two photon launchers on top of the ship with two ion cannons in the front of the ship. Plus, it has a single distortion drive (you can see the space "warp" in the back). With two sub light thrusters for the extra mobility. Ok, now for the rest of the pictures. (Sorry, for any poor picture quality I took the pictures on my cellphone.) http://www.brickshelf.com/cgi-bin/gallery.cgi?f=578780

The latest NINJAGO wave appears to be a callback to the Digiverse from the Rebooted season, sprinkled with some cyberpunk vibe. What’s the big deal about that pink ninja suit? Find out in my 26th EB Review, set #71708 - Gamer’s Market. Overview Name: 71708 - Gamer’s Market Theme: NINJAGO Year: 2020 (1H) Pieces: 218 Minifigures: 9 Price: GBP 29.99 / USD 29.99 / EUR 34.99 / SGD 59.99 / MYR 169.90 (That is probably the longest description copy for a set with about 200 pieces) Introduction Unpopular opinion - I think that Digiverse is one of the more interesting world from Ninjago as it is inspired by Tron and The Matrix. For the upcoming season, our favourite team of ninjas are entering a familiar territory, and yet it feels different. We don't know much about the Prime Empire yet, but as far as I know, it is the game that will be important to the plot of the next TV season. We should find out how and why the ninjas will enter this dimension in season 12. In the meantime, let's talk about the packaging. Front box panel There are 3 Digi Jays in this box. Go find them! If the redundancy of the minifigures confuse you, it's fine. You're not alone. There are so many things happening in the box art that it is hard to figure out if it is a playset or just minifigure pack. It could be both. Back box panel As for the back panel, It shows pretty much about the same thing. Side box panel If the redundancy isn't enough in the front panel, this side panel shows you even the named characters that comes inside the box. Now, once you open the box, you are greeted with 3 plastic bags with numbers 1 to 3, an instruction booklet and a sticker sheet. Did I say sticker sheet? Yes. Unfortunately. Typically, I don't apply stickers . However, if you decide not to apply #1 and #2, the set looks incomplete or bland. Stickers #3, #4 and #5 are almost essential to make the Gamer Market vibe complete and they are small enough to be somewhat inconsequential if you choose to apply them. The translation of the script in the sticker: #4 - Hats! Additional stickers "+" from top to bottom, left to right: The individual letters - Z, N and C. Cole, the cake is a lie A B - probably referencing game control buttons. Minifigures Since this is essentially a People Pack for NINJAGO, what better way to start the review than by beginning with the minifigures. First, here are the official names of the minifigures. In order from left to right: Avatar Harumi, Red Visor, Richie, Okino, Scott, Digi Jay, Avatar Cole, Avatar Nya, Avatar Pink Zane. As we have 9 minifigures to cover here, I will showcase each minifigure one by one to thoroughly cover each one of them. Avatar Harumi Avatar Harumi wields a katana and is undeniably a homage to Kill Bill, an R-18 movie. This is not a coincidence because the new yellow tracksuit has the bluish emblem on the torso. This is present in tracksuit of The Bride. The designers even added a tiny black dot at the hips, which is also new, to denote the button which is also present in the original. Ultimately, this mimics the iconic yellow outfit of Bruce Lee which makes this minifigure even more awesome. The headpiece and hairpiece aren't new. They are exactly the same from 70651 Throne Room Showdown and 70658 Oni Titan. Unfortunately, there is no side printing for the legs or arms. To get around this, the legs has black strip running from the top edge of the hips down to the knee section of the minifigure. Frankly, I think the black lines should end just before the minifigure "feet" because as it is now, it appears that Harumi is wearing a yellow high-cut boots despite the original shoe reference being an Asics Onitsuka Tiger Mexico 66 Sneakers. I don’t know about you but I like how NINJAGO can adopt some adult-oriented pop culture references easily and make them look innocent. To a large extent, I think that this is an appropriate reference because Kill Bill is a quest for vengeance, which is very similar to the story arc of Harumi. However, I don’t really like the idea of my kids searching about Kill Bill due to *cough* blood bath *cough*. Red Visor I am not colour blind. The visor used in this minifigure is definitely not red, but calling this character Neon-orange Visor does not roll off the tongue quite easily, so it makes sense to just call it Red Visor. At least it uses a blaster with red scope. As for the visor itself, it is the same element used in Tron Legacy but in transparent neon-orange. The headpiece has dual face prints which are equally weird. The other one looks like it's about to puke (like those monsters from Hidden Side), and the other one appears to be a display screen of a robot on stand-by mode. Notice that the red symbol is the same as the one found in the shrine, which I will discuss in the build section later on. Moving on to the torso and legs, the major colour combination is red and black, with teal highlights. It has ‘404’ number printed which is a reference to one of the most loathed HTTP response code: 404 Not Found, which means the server could not find what was requested by the internet browser. This "404" number is then repeated at the back of the minifigure but is covered by the new shoulder armour and scabbards. At the back of this new armour, you can insert the frosted trans-neon orange 4L bar piece which is then attached to a gamer display board printed with skull icon, representing their antagonist group, next to 4 (full) health bars. The bad guys distinctly use black armours while the good guys use white. I don't know if it was intentional but the teal curly design at the back of the minifigure appears to be the same design motif for the NINJAGO box art that dates all the way back from 2011. This curly design motif is usually used at the borders of the box arts. See this image of the Fire Temple, and then spot where the right claw of the Fire Dragon touches, just beneath the "O" of NINJAGO logo. . Richie At first I don't know what to make out of this pink minifigure called Richie because it appears to be a rat with a visor and a pony tail. I heard people saying it has a goat face but if it is supposed to be a goat face, then it should have a goatee and a horn. So, it must be a rat. This moulded minifigure head is made of 2 different colour of ABS plastics so the detail is very crisps. The visor is not removable, unfortunately. However, you can remove the pony tail. This minifigure also uses the new shoulder armour and scabbards in black, with the same trans neon-orange gamer display board. In addition, Richie uses a twin-bladed weapon using a black game controller as the handle. Even if I am not the biggest fan of the pixel arts used on the torso and leg prints, the silvery details are excellent. Okino This civilian looking minifigure may look like just an ordinary minifigure but I doubt he is just a civilian because when you translate his Japanese name to English, you will find some parallelism with the other character, Unagami, who is positioned as villain for this season. Since season 12 has not come out yet, it is interesting to find out if there is any connection between the two. What I like about this minifigure is the new hairpiece with traditional topknot called chonmage (chon-ma-ge). It is also made of 2 different ABS plastic colour and the dark red part can be held by minifigure hand as it is the same size of a regular bar piece. Not sure why you would want to do that, but it's possible. The white torso has minimal details, just mere lines to show pleats and folds of a traditional Japanese clothing which is likely a yukata or a kimono. Scott Scott is the character that looks like Jack Davis from Hidden Side, but clearly not Davis at all. The character just happens to have a recoloured cap and hood combo piece, with a different print. On the cap, "S" is written in Ninjago script presumably meant for Scott's initial. There are shiny glimmer of face paint with triangular patterns on light aqua headpiece. This is the same skin-tone as General Vex and Blizzard soldiers from the previous wave but I don't know if this is just a coincidence as other characters use various skin colours in this wave. This could mean something very trivial or important to the season 12 storyline -- but we don't know that yet because season 12 has not came out yet. He also has red eyes and features an alternate face print with a mask. The torso has some crazy detail going on--from 2 dragon heads, reflective triangular patterns that goes all the way down the legs, "A" and "B" written in Ninjago script at the middle of the black inner wear, and "LJ" on his vest. At the back, a dragon circling an "S" is also printed. It almost looks like an ouroboros which is a serpent eating it's own tail. So to recap, the prominent letters printed on Scott are A, B and S --- Acrylonitrile Butadiene Styrene? Digi Jay Frankly, I did not like the design of the Digi suits initially. However, I appreciated the design more as I held the minifigures. Similar to previous masks, the new Digi suit mask uses dual mouldings. However, while the older masks use more rounded curves to imitate the cloth textures, the new design features more aggressive lines which accentuate sharper details, similar to those found in motocross helmets. On the forehead, "J" is written in Ninjago script. The headpiece is new. The primary face print has a VR-like screen with vertical scan lines. The alternate face is just a smug face but looks better when used under the mask. As for the torso design, it is hard to ignore the inspiration from Tron with all those glowing circles all over the torso and legs. Another interesting design choice is the use of a different colour for Jay's right arm. The last time this design choice was used is back in 2012 with Jay ZX. Digi Jay also uses a new shoulder armour and scabbards in white. As mentioned earlier, all the bad guys use black version of this armour, while all the good guys use white. Connected onto the armour is a trans neon-green 4L bar attached to a gamer display board with ninja icon and 3 out of 4 health bars. Lastly, Digi Jay wields a trans-neon green kusarigama (chain-sickle) with a white game controller as a handle. Avatar Cole Nothing particularly exciting about this minifigure because all the pieces here were recycled from previous variants of Cole. The torso appeared in several City sets. Avatar Nya Like Cole, there is nothing much to say about this minifigure because all the pieces here were recycled from previous variants of Nya. The torso also appeared in several City sets. Avatar Pink Zane Finally, this is the last minifigure in the set and arguably the star of this set. This minifigure took 7 years in the making and it is likely the main reason why it is one of the most sought after minifigure in the set. It appeared in the TV Season 1, Episode 5 "Can of Worms". While the headpiece used is not new, everything else is new in this minifigure. The mask is the same mould as the first NINJAGO wave, and its first appearance in pink. If you think the torso is a direct recolour of the classic white Zane suit, you are wrong. To begin, the gold creature emblem on the chest is slightly different. It is slightly bigger, looks more jagged and splintered with ice shards, and for some unexplained reason, lost its mouth! In contrast, the original design looks less detailed, and simpler. The hip and legs print are also slightly different. I think some people will irrationally dislike this just because of these changes. Personally, I don't see much difference at arm's length distance so I am not so bothered about it. What's more important is that the designers decided to add back printing and legs/hips prints. They did not have to do this, but they did it anyway. Personally, I think it is an excellent decision. Build After the minifigures, let's not forget that this set is a playset with several small-sized builds to complete the Gamer's Market. Bag #1 Content Bag #1 contains Avatar Harumi, Red Visor and Richie, trans-dark pink key-tana. The red slope 45 2 x 1 with cutout without stud (part # 28192) is relatively new and 2 of them are included in this bag. Another notable part here is the trans-dark pink 2x2 round brick which appears in this colour for the very first time. Bag #1 Build In the typical NINJAGO fashion, shrines are made of black and red pieces. Likewise, the new collectible item in this wave, called key-tana, is at the middle of the shrine. One great feature of key-tana is that minifigures can hold it in 2 different orientations. If you notice the end of the hilt, it has a bar perpendicular to the hilt just fit for the minifigure hands. Bag #2 Bag #2 contains Okino, Scott and Digi Jay. Outstanding elements found in his bag is the large shuriken piece as well as the weapon pack in trans-neon green colour Bag #2 Build This build is essentially the weapon shop of the Gamer's Market. While majority of the items for sale are bladed weapons, the trans-neon green 1x1 round brick appears to be a potion. The use of the large shuriken piece is a bit flambouyant for my taste and I could imagine that if the designers used a more subtle approach, they could have avoided using such a large expensive piece. As an alternative, the set could have benefited on additional small pieces for auxiliary builds. Bag #3 Bag #3 contains the rest of the protagonists - Avatar Cole, Avatar Nya and Avatar Pink Zane. There are a lot of interesting minifigure accessories included in this bag. The most important being the blue classic space helmet and gold conical hat. Bag #3 build For such a simple build, I think I appreciate this the most. This is because out of the 3 builds, it has the most efficient use of parts to display all these headgears. No bells and whistles Completed Build with all the minifigures Looking at the overall build, I can't help but focus on the small details such as the accessories found in these minifigures. Just to reiterate, there are 2 game controllers in this set, 1 black/red and one white/black.The Arcade Pod impulse-buy sets, (sold separately) contains the gold game controllers. All of them look awesome and I hope we see more of this game controller piece in other sets. Then again, there are also not so beautiful side of the build. I think only the shrine build really suffers from a terribly bad angle due to that large teal piece as most of the teal anti-studs look terrible when viewed at the back. The other 2 builds looks just fine. Finally, here are the extra parts once everything is built. Conclusion This set has taken us to an uncharted territory. The positives are definitely praiseworthy and it offers many things I want to see repeated in future sets. Of course, it's not all good points. There are some bad ones too but they are tiny. Pros: People pack for NINJAGO! Pink Zane and Harumi in Kill Bill tracksuit Interesting minifigure accessories such as game controllers, key-tana, blue classic spaceman helmet, weapon pack in trans-neon green, etc. Cons: Stickers Limited play structures Could have featured more meaningful "avatar" characters Ultimately, this is something that you will buy primarily for the minifigures, and secondary only for the actual playset. So, to wrap things up -- Review summary Playability: 9/10 - There are no gimmicks, just pure small builds that is fit for purpose. If large pieces were not used, additional small structures could have been added for more variety. Design / Building Experience: 7/10 - Nothing revolutionary in 3 small builds but it's interesting enough for younger builders. Minifigures: 9/10 - Considering that Avatar Pink Zane is a deep reference to early TV season, it feels that Avatar Cole and Avatar Nya were just fluffs or an after thought. Still, 9 minifigures are awesome. Price / Value for money: 10/10 - TLG, keep this up! Overall: 8.75/10 - This is a great set with 9 unique minifigures and satisfactory builds for role-playing that will make avid NINJAGO fans happy and entertained for hours. Hey! That's mine!

Been working on something Lego-related, but not quite Lego, for the past few weeks... 3D printed Ninjago props and weapons! I love the detailed designs as seen in the TV show, and wanted to replicate some physical props to use as interesting wall decorations and whatnot. Starting off, we have Cole's Hammer, as seen in Secrets of the Forbidden Spinjitzu! I based the design off of these images (and the show): And came up with this: Next up was a Fang Blade, all the way back to Season 1! Based it off of this reference: And came up with this (some creative liberties taken to make the pattern stand out more): What do you think? I'll probably continue updating this topic, as I have a lot more in the pipeline (including every golden weapon, a Jade Blade, and maybe Chen's Staff) and if anyone has any suggestions for tips or ideas on what else to design and print, let me know! Thanks for checking this out!

Ninjago is a world full of action and adventure which keeps the ninjas constantly on their toes! However, all this excitement can get a little tiring for the ninjas' wise old Master Wu. That is why, up in his secluded Monastery of Spinjitsu, behind his dojo he has a hidden zen garden where he comes to sip on his beloved tea, meditate, and find his "inner piece" - or to just get away from the ninjas when they are arguing over who's turn it is to do the dishes. Built on a base similar to that of a miniature zen garden sandbox, this scene features many items typically found in a Japanese garden: a torii gate, raked sand with carefully placed rocks, a red bridge over a pond, a cherry blossom tree, a stone lantern, a jade dragon statue, and various plants and flowers in calming colors. Here is a closer look at the raked sand, the pond, and what I like to call the Wienersaber Bridge. A few side views of the scene: I hope you like my entry for the Eurobricks Flower Show contest. If you have any ideas on how to improve it, please let me know. Thanks, and namaste.

Inspired by the small boats in the early scenes of the Lego Ninjago Movie, i made my own little boat, complete with a sail, an oar to push the boat through shallow water and buckets for fish. Ninjago boat (1) Ninjago boat (2) Ninjago boat (3) Ninjago boat (7) Hope you guys like it, leave a comment if you like.

The Time Twister Twins have gathered all the greatest villains in Lego history such as Captain Redbeard, Baron Von Barron, Basil the Bat Lord, Ogel, and Lord Garmadon to destroy the heroes once and for all! From their evil fortress guarded by a skeleton army, they have created a giant time portal that is twisting up the Lego timeline! Minifigs from across time and space are pulled through the portal and structures from various eras are colliding. Imperial soldiers are fighting cowboys, pirates are fighting bandits, and samurai are fighting mummies! Can the Time Cruisers Tim and Dr. Cyber unite all the heroes against these villains and save the timeline? On the left you can see the Pirates and Western time zones. Fort Legoredo has fused with an imperial fort, much to the dismay of the Brits and Yanks who are fighting each other. Meanwhile, the Islanders and Native Americans, two factions that were being called "savages" by some of the other minifigs, are meeting by King Kahuka's throne for peaceful negotiations. Out on the water, you can see a small pirate ship engage in a shootout with the bandits of the Coyote Gang while some Aquanaut and Atlantis divers are fighting off skeletons. Spaceship, Spaceship, SPACESHIP!! On the grounds surrounding the Time Twister fortress, minifigs from different eras are fighting the skeleton army while the Time Cruisers are flying in on their latest time machine, the Time-Rift Raft. It has a play feature that causes the propellers to spin when it is rolled across the ground. On the right of the battlefield, a Ninja temple had fused with an Ancient Egyptian tomb. Classic Kai, Pepper Roni, and Johnny Thunder and his friends are fighting skeletons while the Rock Raiders and Power Miners are fighting over a power crystal. Baron Von Barron swoops in from above the temples in his remastered Bi-Wing to attack his rival Johnny. Sorry for all the dust. This MOC was sitting around for a while before I got around to taking these pics and I didn't notice the dust until after the photo shoot. Up on top of Time Twister Tower, Ogel oversees the battle while the Time Twister Twin operate the time portal machine. The portal design is inspired by that of Piotr Machalski and Milan Sekiz. I included some interior in the buildings as you can see in this back view, although it's not much since I ran out of time (ironically). I hope you liked it. This was my entry for the Lego Legacy Battle contest on Lego Ideas from a few months ago. Unfortunately it didn't even make it into the voting phase, but honestly it's not my best work. I had to rush to get it built within a month to meet the submission deadline and it ended up being more quantity than quality. Still, I had fun building it as it is essentially a tribute to all the action themes that I loved growing up. What's your favorite Lego action theme? Let me know in the comments!

Hi all! Here is my first try to use some Ninjago style design. Feel free commenting - thanks!

So with it being Halloween today. What better time to show off the mods I made to Skull Sorcerer's Dragon. https://brickshelf.com/cgi-bin/gallery.cgi?f=581337 Full set of pics in the gallery. I'll be only showing a few here to keep the topic less cluttered. Changes I made 1. Adding shoulders and a waist joint. 2. Removing the lime green but adding more trans bright green to compensate 3. Made the wings more poseable and able to fold in 4. Made the head a bit more show accurate and removed the flags. 5. Gave the tail a gear so it could swing as a function. Also made a stand for Skull Sorcerer giving him the spear he had in the show. Also used the 3 Awakened warriors I had and made it look like a bunch were emerging from the mountain stand. I used Spinjitzu Burst Lloyd's energy parts to add a magical effect to Skull Sorcerer. I made the Skull of Hazza D'ur appear floating with the two Blades of Deliverance floating next to it I even added a comedic effect of one of the Awakened Warriors emerging upside down. Since I used Spinjitzu Burst Lloyd's spinner parts on Skull Sorcerer's stand. I turned the rest of the set into a launcher for the dice spinner for the game.

This year has seen me move away from Technic C-modelling into using system bricks. In between the various lockdowns I picked up quite few Friends sets to C-model due to their very low price per piece on the second-hand market which gave some good practice. I saw the Velocity Racers set on my only trip to the Lego Store this year and the part balance made me think this set had a lot of potential for alternate builds, so I picked up a brand new copy (on sale). Having quite a few Technic pieces in the box, helped with my decision. Over the few months since then, I've managed to produce three different C-models using only the parts in set 71709. I'd share with you this collection of Velocity Boats, Fighter Plane and Trike. The race for the Key-Tana can now take place by land, air or Sea. Also Hauser can now put a bit more of a fight, having some vehicles of his own rather than just a hoverboard. Velocity Boats: Velocity Fighter Plane: Velocity Trike: