HenrikLego Posted April 24, 2013 Here is my version of NSB Di7 (all pictures are clickable for full size): This engine is build 7 wide to fit the PF-battery box, reciever without using stickers. The engine room is 4 wide with tiles on the outside to cover the battery box and the reciever. The train uses a regular PF train engine (on the rear bogie). This is connected to the same channel as the PF-lights in front. In the front part of the engine there is also a PF M-motor that goes down on the front bogie where I have placed an linear actuator to couple wagons on and off. Here are some more pictures: Norwegian freight carriages: I have also built some freight carriages based on old carriages from NSB. L4: Small carriage that was used to transport wood coal. G4: One of the most common freight carriages in Norway after WWII. H3: Cooling wagon for transportation of fresh food. T3: For lumber Decoupler huts: I have made some small huts to store an M-motor for remote operation of the decoupler-design by CamelBoy68. I've also built a buffer that I'll place on the end of my parking area for freight carriages. I'll finish off with an image of the train together with all the carriages: Share this post Link to post Share on other sites
King Aragorn Posted April 24, 2013 Wow, superb work! Share this post Link to post Share on other sites
Axis600 Posted April 24, 2013 I love the G4 for some reason. Good job, HenrikLego! Share this post Link to post Share on other sites
harnbak Posted April 24, 2013 Love this, especially the set as a whole! Well done! Share this post Link to post Share on other sites
Werlu Ulcur Posted April 24, 2013 Man that looks TERRIFIC! But why does the top panel on the front slopes downward one plate? That's how it is on the real one? Share this post Link to post Share on other sites
HenrikLego Posted April 24, 2013 Many thanks for all the nice comments! The real one has a slight height difference on the front part. Here is an image of the engine: Share this post Link to post Share on other sites
Commander Wolf Posted April 24, 2013 (edited) I think the surfaces on the locomotive are a little plain, but the track work and rolling stock is lovely! EDIT: How exactly does that decoupler work? The linked thread suggests that you need non-Lego couplers, but it looks like you have the stock couplers? Edited April 24, 2013 by Commander Wolf Share this post Link to post Share on other sites
Pop Bumper Pete Posted April 24, 2013 I like the rollingstock, a few of those look like what was used localy Share this post Link to post Share on other sites
Hrw-Amen Posted April 24, 2013 Great engine, I like those ones with double sides and raised middle, you don't have to turn them around to run the other way! Nice rolling stock and track ballast as well as the little signal baox you have built. Share this post Link to post Share on other sites
LEGO Guy Bri Posted April 24, 2013 Fantastic job HenrikLego! The loco is spot on and the you've detailed the rolling stock and track side structures superbly. Very well done Share this post Link to post Share on other sites
LEGO Train 12 Volts Posted April 24, 2013 Amazing rolling stock! Very imposing work! :thumbup: You have to be proud of your skill! Share this post Link to post Share on other sites
jmchisel Posted April 24, 2013 Your engine has that "massive" look that a heavy shunter should - looks excellent on the front of your goods train. Your "G4" wagons look fantastic too with the "planks" and the shape of the roof which is absolutely perfect. Your trackside constructions are great! I like the shingle effect on the roof of the lineside hut, excellent detail. Share this post Link to post Share on other sites
Professor Brick Posted April 25, 2013 I'm particularly partial to the rolling stock. The train just looks complete. Share this post Link to post Share on other sites
HenrikLego Posted April 25, 2013 (edited) Thanks for all your wonderful, nice comments! I think the surfaces on the locomotive are a little plain, but the track work and rolling stock is lovely! EDIT: How exactly does that decoupler work? The linked thread suggests that you need non-Lego couplers, but it looks like you have the stock couplers? Do you have any suggestions on what pieces I could use that can make the surface a little less plain? I have been thinking about it, but haven't found any good things to add. There are two kinds of decouplers here. One on the engine itself and one in the hut. The one in the hut is best described in the thread I linked to by CamelBoy68. The decoupler in the engine is used with standard lego-couplers, and the carriages is detached by running the linear actuator inwards. I'll show it in a video in a few days. I like the rollingstock, a few of those look like what was used localy Thanks! I think they are quite common sight in most of Europe, in variations not unlike the ones here in Norway. The engine itself is a T44 model made by the swedish company NOHAB (Nydqvist & Holm AB) and is more common in Sweden than in Norway. We only had one of these in Norway, with the yellow/red colour scheme. Edited April 25, 2013 by HenrikLego Share this post Link to post Share on other sites
Sir E Fullner Posted April 25, 2013 It is a wonderful locomotive, however, looking at the pictures of the real one, I think you could add some more detail like air-intake valves and fan grates. Share this post Link to post Share on other sites
Commander Wolf Posted April 26, 2013 Do you have any suggestions on what pieces I could use that can make the surface a little less plain? I have been thinking about it, but haven't found any good things to add. I think you could add some more detail like air-intake valves and fan grates. Yeah, the sides of the actual locomotive are a bunch of panels with small handles, and there are some vents in there too. I would try to add the vents and re-orient the tiling (ie vertically instead of horizontally - and/or maybe use 2x2s?) to more closely follow the layout of the panels and maybe find some way to suggest the handles (ie with the 1x2 plate with offset, etc). Share this post Link to post Share on other sites
mostlytechnic Posted April 26, 2013 Great rolling stock, and looks like a fantastic decoupler built into the loco. Might have to steal that... Share this post Link to post Share on other sites
CarrollFilms Posted April 26, 2013 Amazing job on the train! It looks amazing. I love the decoupler hut and all of the train cars. Keep up the great work. Share this post Link to post Share on other sites
Man with a hat Posted April 27, 2013 Great work. The train looks perfect. ery smart how you managed to put in all the PF fucntions including the decoupler. But those cariages are also beauties. Share this post Link to post Share on other sites
CamelBoy68 Posted April 27, 2013 Hi HenrikLego, that looks really cool :thumbup: I was really enjoying your train and rolling stock, but then I saw the decoupler and that looks great. It looks like you are using the Mk2 decoupler, are you experiencing any difficulties with the shorter wheel base stock ? Can't wait to see your vid. Top Stuff CB68 Share this post Link to post Share on other sites
Duq Posted April 27, 2013 That's a nice train you have there. I'd love to see what it looks like in a bend, with the pivot point of the bogie so far back. Share this post Link to post Share on other sites
Selander Posted April 28, 2013 As Swede I appreciate the nice locomotive design. Also I like onboard remote decoupling and have built a similar design that you may have seen? Share this post Link to post Share on other sites
Xyver Posted April 29, 2013 That's a great train, but I really love your rolling stock. Share this post Link to post Share on other sites