Search the Community
Showing results for tags 'speeder'.
-
Quite old, but I never posted this MOC: I never really liked the LEGO set (75207), so I built my own version - which turned out to be more difficult than expected because there is so little space inside the model. Anyway, it was a lot of fun to work on such a small but still detailed model and I am very happy with the result!
-
Just a quick build with just a few parts. I’ve built it in one hour. The Sand Speeder is a fast, small speeder for travelling and exploring the planet. Equipped with a laser gun. Pictures also on Flickr: https://www.flickr.com/photos/mathijslegofan/albums/72177720295356282
-
Hello everyone! I won't be wrong to say most of us now are looking forward for the Batman's remake. Because of an old promise and of the upcoming movie I want to show you this creation - nightspeeder. Main functionality - two projectile-launchers activated via separate buttons from the rear. Here are a slow-motion animation (maybe you should wait to load it) and some photos: If you want to build it - you can find building instructions here: Rebrickable Thanks for the attention!)
-
Here is my latest creation and a little lore that fed into the design. I made the speeder moc a while ago but just finished the base. I had a bunch of vibrant yellow 1x6 bricks and 1x12 plates along with Lime 1x2 curved slopes and plates from the PAB wall and set about using them here. So without further ado: In the dense atmosphere, pilots rely on instrumentation to avoid areas of high pressure which cause the crystallization of nitrogen and methane gas in the atmosphere. These 'gasbergs' have been the cause of many devastating collisions. The S21 features several innovations uniquely suited for use on the mining colony; a fully sealed body able to withstand the extreme pressures and highly caustic atmosphere of Saurus. Stabilizing piers with regular and inverted repulsers offer stability in turbulent gas currents needed to operate sensitive long-range sensors. The most unusual feature is the onboard nitrogen harvester. The nitrogen can be used to fuel the booster phase of the twin ion/combustion engines, allowing repeated orbital insertions without the need for refueling stations. When fired, the boosters ignite atmospheric xenon-nitrogen, producing distinctive green contrails.
-
Here is my latest moc. I call it the UN-D11 Air speeder ...or maybe its a flying car, or a spinner, or a hovercraft... Lately I've been feeling a bit burnt out and have had a hard time coming up with the creative energy to put into building. Instead I've been spending a lot of time looking at concept art, going back and re-examining some childhood favorites to try to get some inspiration. I've also been thinking about going back to my LEGO moc roots. My first "serious" builds were speeders from and based on the Star Wars universe. Something about the cross of utility - the need to move people and things, with the styling - the industrial design of a consumer product - really appeals to me. I enjoy the tension there. And this is the result. Inspired by some of the sci-fi greats, Syd Mead, Don Davis and Peter Elison, I wanted to create something with exaggerated lines and a strong character but also plausible (As far as flying cars go haha). It ended up being a lot of fun and has helped spark my inspiration. I'm looking forward to building more of these weird fantasy vehicles! Thanks for looking! Do you have any artists that you turn to for building inspiration? Let me know in the comments.
-
Hi everyone, Here are the Silver Speeder and the White Witch from the 80's TV show Star Wars: Droids. I wanted to put in figs to show the scale of the vehicles but don't have anything approximating Thall Joben, or a Holiday Special era Boba Fett, so a few substitutions were made. The Silver Speeder (well, light bluish grey speeder) - 286 pieces The White Witch - 261 pieces
-
Hello, Here I present my Swoop - a reminiscence to the one from Taris in the old KotOR video game. This one is a modern version and from coloring and design point of view reminding of Anakins pod racer*. Check out it's garage and how it's used as a set in my latest episode in the Mysteries RPG: * It came to pass that Ireused the pod from my M4-24 entry and modified it
-
This design goes from Lev-bike to armor.
-
After I spent some time relaxing here, on Tatooine, it's time to work. I've found a decent job last week and I collected some information about it: The target is a Rodian named Eaklo Khzecez. He was a racing pilot, he did mostly podracing, but also did speeder bikes races too. He was sponsored by the Hutts, it meant that he had to do what he was told. Towards the end of his career he had to lose more and more times and he was satisfied with this. On his last race, instead of losing he won it. As later it turned out, he betted himself. He grabbed the money and disappeared with it. Since then he's probably traveling around the planet on his speeder, but no one has able to find him already. Until now... Eaklo Khzecez - Haku? (What?) Eaklo Khzecez - Ting cooing koo soo ah. (I've got the credits.) Bohr Gotta - Mala tram pee chock makacheesa. (You should have paid him when you had the chance.) Eaklo Khzecez- Ah'chu apenkee? (Who are you?) Bohr Gotta - Mee jewz ku! (Goodbye!)
-
Just realized I haven't posted a film here in a while. Might as well change that! A Stormtrooper gets into a little trouble... My first attempt at melding live action and stop-motion animation. It was made for a compilation of funny videos that had a tight deadline, and so is a bit rushed. However, I hope you enjoy it anyway. -
So I went and made my own version of battle packs relating to the Sith and Jedi, sense I think those two would be good for those who want to recreate the battle in the Jedi Temple from the old republic or anything that a person need to build a army of Sith or Jedi for. Sith Battle Pack 98 pieces (minifigure 20 pieces, weapon 10 pieces, speeder 64 pieces and 4 studs) 4 minifigures (2 sith apprentice, 1 sith master and 1 sith lord (Sith Pureblood)) Model: “Now here’s the most original thing for a battle pack… a speeder” Do to the sith having lightsabers (though this pack could be the first outside of the superhero theme to have the super jumper), it’s best for the model to at least have stud shooter. While pretty much no one care about the model in battle packs and only want minifigures for army building, I wanted this battle pack to be different of having contraction parts which I think gave off a good shape for the speeder of using those 3 ultrabuild pieces though I wouldn't say the same with the tip of using those Exo-Force arms and small claw. With the use of these parts, the wings and front parts can move to find some sort of way to pose it. Jedi Battlepack 106 pieces (minifigure 20 pieses, weapon 8 pieces, Dwarf Spider Droid 39 (x2 78)) 4 minifigures (Jedi Master, 2 Jedi Knights, Padawan) Model: After I made a Sith battle pack a few months back, it would make sense for me to make a Jedi Battle Pack. But instead of a speeder for them, it’s an enemy model of the Dwarf Spider Droid, but instead of having a stud shooter, it have the ‘Power Blast’ piece that mostly been used in the Superhero theme. The head of the droid can turn, but not a full 360 do to the legs. Speaking the the legs, originally they were going to be hinge pieces, but they didn’t work so I went with the Exo-Force Arms that was used in the 2008 Dwarf Spider Droid (set 7670). Do to the size of them compare to other battle pack model, looking too small and may cost lesser than $10. So instead of building a different model, this would have 2 of them that can build up someone droid army with some Dwarf Spider Droids.
-
Apr.14 2020 finalized Dear friends, here I would like to post my finalized LEGO Star Wars Clone Trooper BARC Speeder, as usual, previous MOC design post records had been folded at the end of this post. Since last MOC built of my BARC speeder, almost 1 year pass. Recently TCW S07 is on show and LEGO announced 75280 BARC and AT-RT battle pack as well. All these delightful things encourage me to finalize my BACR speeder MOC evolution tangle. Some time I just stared at the 3D model for quite a while, couldn’t figure out what’s myself prefer... During my MOC polish, there’s very good inspiration from Flickr ID Luca (a.k.a Luca s projects) BARC-speeder with sidecar (https://flic.kr/p/2gDHfAr ) . Especially in our domestic forum, a fan (贴吧用户_5AeVAaG) work out the front engine’s turbo feature within limited space. The key trick of front engine turbo feature, is the MF tool screw driver as below, for sure, per suitable color, 93094 Lipstick is also working fine. Since early of this year my AT-RT MOC evolution, I decide to abandon MF riding position, which need to disassemble MF legs, I knew lots fans feel bad on it, thus, now MF legs print is presentable To ref. the BARC Speeder database (by unusualsuspex, on deviantart), here I built this 15 stud length BARC speeder, if as normally count 3 stud = 1 meter, then just fit the MF scale :) Benefit from the radii of 26047 part, the sidecar is rotatable to display the scene from TCW S04E11. To duplicate myself BARC and AT-RT battle pack, here I combine it with my AT-RT MOC, and a fun of “fake news” leaking box is coming :p Also plus one more couple of BARC and AT-RT, it upgrades toward an “Kiros battle pack PLUS”, LOL With color scheme modified, easy to gain an EP3 91 Recon Corps BARC version. May.30 2019 updated Oct. 2018 modification Sept. 2018 first try -
See replies in this thread for NEW models - I have consolidated all models from Solo from other topics in to one thread (I had time on my hands during lockdown!) Models in this thread - CONVEYEX TRANSPORT TIE/rb HEAVY STARFIGHTER AT HAULER KESSEL RUN MILLENNIUM FALCON FIRST LIGHT YACHT M-68 LANDSPEEDER (HAN's) A-A4B TRUCKSPEEDER (MOLOCH's) IMPERIAL ARRESTOR CRUISER CONVEYEX TRANSPORT Hello again everyone. To celebrate the DVD release of Solo I present my MINI version of the Conveyex transport. It took me a while to get the overall shape without the cars becoming too wide. There are technic bricks and bricks with studs on the side in the middle of the model and slopes, plates and tiles arranged on the exterior in such a way so that they all interact to hold the little models together. At first I was just going to build the front engine and caboose (like the system scale model) but then I decided to do both top and bottom once I worked out how I could attach both sides to the track! The track is simply tiles and plates and the bottom engine and container are attached by inverting bricks with studs on the sides at the bottom of the two modules. I really enjoyed building this and am really pleased with how this one turned out. Now to watch the movie for the first time! Let me know what you think. Jon The model is below and here is a link to the Solo gallery (when public).
-
Hi all, today I present to you my take on the Z-4 speeder bike. This is mainly a mod of 75133 rebel battle pack but that speeder is oversized and I wanted to scale it down. I hope you like it! Here is the canon appearance of the speeder: Suggestions and constructive criticism are welcome!
-
Hi guys! This is my minifig’s scaled ARATECH C-PH Patrol Speeder bike used by the Imperial Patrol troopers. It appears just few seconds in the second Starwars spin-off movie called Solo : A starters story but I very appreciate its design! :) Special Credits for the inspiration of some parts to : Luca s projects (<a href="https://www.flickr.com/photos/158356948@N03/28684534188/in/faves-150499648@N03/">www.flickr.com/photos/158356948@N03/28684534188/in/faves-...</a>) BricksStudios (<a href="https://www.flickr.com/photos/154427736@N03/28517703548/in/faves-150499648@N03/">www.flickr.com/photos/154427736@N03/28517703548/in/faves-...</a>) Showcase and Tutorial Video : Parts list : https://rebrickable.com/mocs/MOC-15136/BricksFeeder/aratech-c-ph-patrol-speeder-from-solo-a-star-wars-story/#comments I hope you enjoy the build even if it's not perfect! :) keep on building! -
Here's a small rendition of the police spinner from Blade Runner 2049. I wanted to build it almost completely in metallic silver, which wasn't so easy capturing the shape properly. The gun on the top is inspired by some concept art like this one. In the movie there's a drone instead integrated into the vehicle. Hope you like it :) Best, Johannes
-
So I was browsing Flickr and I saw some cool speeders. Feeling inspired, I experimented with a couple of parts and this is the end result. Enjoy! Cheers LMF
-
My first MOC since ages I was watching Episode II today and was a little bit upset that there is no update for the coruscant speeder pursuit. So I decided to make my own Coruscant Speeder. And with the first pictures of Han Solo sets appearing, I thought: "Lets make it Han Solos Speeder." And here it is. Totally flimsy. That is, because I only used the parts of set #75918. That made the building challenge a bit harder I hope you enjoy it.
-
Hello, I'd like to share with you my Canto Bight Police Speeder MOC I saw these in the last jedi and I found their design to be quite interesting so I tried to recreate them with my bricks. There are a few things that bother me with my design but it is the best I could do with the bricks I have. I mostly used the Hasbro toy as a reference (removing the huge cannons) since they aren't many good pictures for this vehicle yet. Let me know what you think of it
-
Just passing time with LDD and I somehow created a Blacktron III shadow speeder. (I think it was inspired by the Snow and Sand Speeder sets, such as 75204) The wings on the rear were exchanged for more menacing Batman ones, and the colors of the fold-opening windscreens changed to trans-yellow. The ship is 100% build-able, and would feature a printed 2 x 2 curved slope with the "B" from this online store called Brick Builder's Pro The rear of the ship features the engines and invisibility device cooling fins. Both canopies open up to place figures inside. The needed figures would be the Rench alien figure's suit from SP3, with the new Nexo Knights heads from this year's energy Vampire baddies and the helmet from Series 10 Paintball player CMF. Any thoughts on this idea? -
A little Mtron speeder I built awhile back. Enjoy! Cheers. LMF.
-
Police L.E.V. 5 (Light Enforcing Vehicle - Pursuit Class) Just thought I'd share this with you guys if you haven't seen it yet. The LEV is the most common police vehicle in colonies with a sanctioned judicial system all over human explored space. There are several classes of LEV modified for specific tasks. The Class 5 (Pursuit Class) is equipped with multiple types of suppression weaponry, jammers and a local weak inertia suppression field, protecting the pilot from high G-forces during hard accelerations. This is a power consuming ability but the being able to quickly overtake fleeing suspects is clearly advantageous. Built for 2018 Lego Speeder Bike Contest, Category: "ENFORCE" This MOC started with the Throwbot Visor (Windscreen) and then I just tried to find pieces matching it. While building this I came up with a neat idea to attach the windscreen to regular LEGO System:
-
Hi, check out my contest entry into Lego ideas contest - "Build An Epic Ride For The Future!" More photos on my flickr Enjoy!
-
Just a moc I made after watching the Mandalorian season 2, episode 1. The Marshall is a cool character, with a neat speeder bike built from Anakin's podracer.
-
Hi everyone, This is my latest creation: Futuron Dropship. I wanted to build a dropship and was inspired by several Star Wars cruisers. This dropship can transport an exploration car and droids. The front can be opened and two people are positioned behind the controls. At the back is a ramp, that can be openend (like a plane). The roof can be removed to see the interior. See more pictures in my Flickr album. A few months ago, I've build some speeders for Futuron. One other picture is in the same album I mentioned earlier. Sander
-min(1).thumb.jpg.ce2295944ffe06d5bf7588ed87f3d83d.jpg)
