Search the Community
Showing results for tags 'rocket'.
-
Based on the Lego Road Show large rocket display, this 4 level base has 4 vehicle garages on the lower level, 4 Spacehip hangars on the top level, and a 2 story high airlock rooms on the mid section. The mid section is divided on 8 rooms on 2 levels which can be used as barracs, sickbays, labs, communication centers. At the center of the top level, is a launch silo with a manned rocket. 4300+ pieces, all Classic Space parts. More images here: https://www.facebook.com/groups/1421271881962817 link Happy Base-ember!
-
Get ready to blast off into the unknown vastness of outer space! This model was inspired by set 3831, (Rocket Ride, from the 2008 Spongebob line) albeit with a pointier nose cone, and gray color scheme. The model now has a enlarged engine section with longer tail fins and four more engines, along with a crew of two humans and a robot helper. One of the human astronauts can even be seated in the fold-open cockpit. (The below story line is 100% fiction.) This ship is the forerunner for all of the other Lego space ships: in 1969, this crucial piece of history launched from LegoLand Space Port for a mission to the moon. This was very soon after the failed 1965 launch of 801-series Space Rocket, which killed the the brave crew of Kat Aclysm: female rocket science genius and designer of the experimental ship, and Abraham "Abe" Normal, the best test pilot in the academy. Their deaths at the Samsonite launch pad were not in vain though, as the newly founded LegoLand Aero-Space Authority (renamed Classic Space Command in 1978) rebuilt their reputation as the premier brick-built space agency by launching the "Innovator", also known as LL002 which in early August 1969 made history as the first mini figure - built object on the moon! This rocket and it's crew (Bill Fold, Penny Wise, and S1L-V3R the robot) made history with their two days on the moon's surface, providing the foundations for the Classic Space Moon-base series of missions. The model without the figures The model now has a enlarged engine section with longer tail fins and four more engines. The rocket features an opening section to get at the interior which now only consists of the cockpit. The model was too weak in real life when the whole thing opened up, so I was forced to solidify every section to keep it from falling apart. The trans-clear windscreen part should have this print. The crew of this fateful mission was commander Bill Fold and scientist Penny Wise, along with their robot helper S1L-V3R. (nicknamed Silver) The robot is inspired by the robot customer in the 2007 set number 4981 (another Spongebob set called The Chum Bucket), while the astronauts were inspired by the Sandy Cheeks mini-figure in set 3831. The mini-figures should feature this torso print. MISSION NOTES: Here is the inspirational set 3831, courtesy of Brickset... ...and here is the original real life version of the rocket. The LDD file for the updated rocket itself is here. As usual, comments, questions, complaints and suggestions are welcome! EDIT 6/24/17: LDD file and pictures updated for the larger and now multi-engine rocket. -
The Apollo 11 Saturn V rocket by LEGO Ideas users saabfan and whatsuptoday been confirmed, and is being released as 21309 NASA Apollo Saturn V! Full details in this Ideas blog post. 1 meter tall (over 39 inches) (!!!) 1969 pieces (we see what you did there, LEGO! ) USD 119.99 / EURO 119.99 / GPB 109.99 (wow, amazingly inexpensive, all things considered) Available June 1st, 2017 Original Ideas submission image: Announcement video:
-
I've been on a steampunk kick recently... here are the fruits of my digital labors. The building's a WIP in the real world, while the rest will come later. From a WHAM product brochure (circa late 1909): "Here at WHAM (Wayne Highly Advanced Mechanisms) we always have our eyes on the horizon of the future. From our humble beginnings designing our first line of industrial hyper-reactors, to our more recent ideas of regular rockets to the moon, we here at WHAM are always striving to make our world - and beyond - a better place for us, our children, and so on out into the great unknown of the distant future. I should know, because as son of founder of WHAM, Dr. Lucius Wayne, I, Floyd Wayne am here for YOU. Don't believe me? You can see inside this brochure of our upcoming products for 1910 and decide for yourself. If you have any questions or requests for specific machines, please write to our Marketing and Public Relations department as shown on the back page and I'll see your special needs are filled. Remember: Don't buy a scam, buy a WHAM!" Here are the models I've worked on / revised: the giant robot, frog translator chair, laboratory building, automobile, and personal rocket. Because why should you not have a steam-powered mobile translator device for your highly intelligent pet Frog? Oh, and the inventor of this and much more is Lord Floyd Wayne, an eccentric Victorian inventor with whom failure is not an option. (In case anyone couldn't tell I was listening to Pink Floyd songs while creating these as that's where the inventor's first name came from. Oh, and as a fun note, the frog's chair actually began life as Davros' (creator of the Daleks) chair from Doctor Who. ) This rocket (named the Golden Bullet) is designed for atmospheric travel only, as it does not have a complete canopy nor air tanks for outer space travel. (actually, it was inspired by LEGO Universe' steampunk rocket, but with more recent parts and several recolors) The ship is powered three smaller booster motors and one larger main engine. (The rocket's original inspiration was taken from the first LEGO MMO from 2010, LEGO Universe.) The Golden Bullet comes apart in three sections, with the nose cone, cockpit and engines all being removable from each other. (NOTE: This print is missing from the dark tan 1 x 6 tiles on the driver's compartment.) This giant robot (named the Brass Man) was created by Lord Floyd Wayne as an tool for outer space exploration. Everything the robot sees is transmitted back to it's home base via a hyperspace sub-channel to be recorded and viewed for scientific study. The Brass Man is powered by a experimental hyper-matter reactor, which gives off steam as a safe and harmless by-product. (The robot was originally inspired by @hachiroku's Iron Giant, seen here) The monocle seen here is supposed to have this print. as a sort of targeting computer for weapons and for long-distance magnified viewing. The robot's main weapon is this laser pistol that disintegrates on contact. Only Lord Floyd (it's inventor) knows how it works, as he doesn't want any Earth governments to discover it's dark secrets. This device is only to be used for self-preservation and at that only as a last resort. I plan on using my version of the 2018 Marvel Comics 'infinity War" set 76108 (Sanctum Sanctorum Showdown) for a 1920's-flavored steampunk take on a mad scientist trying to open a time doorway into the beginning of the universe. What he doesn't know is that creatures from before our universe began were destroyed at that moment, so they will come through the doorway to the mid-1920's as a way of sheltering themselves from that fate. Unfortunately, being from that time frame, of course they want to end our Universe so they can live again in peace. As this takes place in my Adventure-verse, Johnny Thunder is tasked with shutting down the doorway before our universe sinks back to before the big bang... and Sam Sinister is trying to use the time / space doorway to achieve vast riches by robbing ancient cultures of their valuables using the Time Window, which draws the attention of the giant robot seen next to the building, leading to a cascading domino-like series of events that have not yet been written. The rear of the building has a ground-floor conservatory. The rearmost window on the bottom floor opens up 90 degrees to allow for figure placement in the conservatory. As a side note, the original Marvel model's exploding walls and drop-floors have been removed. The means from getting from one floor to another is a spiral staircase, and a small skylight has been added to the roof. The inside feature the following: The lower floor has a fireplace with clock on mantle, table with a pizza, and lamp on a side table. The middle floor features a marble bust on a printed safe, and a bed. The dark red thing in the greenish jar is a beating human heart. The upper floor features a desk with some sort of electricity storage machinery, several flasks, two bookcases, time portal computer and microscope. This early-1900's automobile was designed with the tan off-road model in set 76003 (Battle of Smallville) in mind, with a bit of 7628 (Peril in Peru) thrown in for good measure. I was aiming for continuing my Steampunk theme, but ran into a mental roadblock with regards to this car, and about four other prototypes that didn't make he cut. (Sadly, they were accidentally saved over and are now gone) The rear of the model with the spare tire, brake lights, and dual exhaust pipes. ...And that's it for now! Any questions, comments, complaints, and suggestions are always welcome!
-
This model was recreated in LDD by Eurobricks user @Stephan, which I then took and recolored in my red and gray color-scheme. I also added the opening cockpit from my older rocket model along along with new tail-fins and two less rocket stages. The two astronaut figures and one robot are also included in the LDD file! NOTE: Some parts would not fit on the rocket according to Stephan due to tolerance issues in LDD, and are left to the side in the file. They are hidden in the pictures, but they are there, so be alert when building in real life. You have been warned! Fictional background info for the rocket: This ship is the forerunner for all of the other Lego space ships: in 1970, this crucial piece of history launched from LegoLand Space Port for a mission to the moon. This was very soon after the failed 1965 launch of 801 series Space Rocket, which killed the the brave crew of Kat Aclysm: female rocket science genius and designer of the experimental ship, and Abraham "Abe" Normal, the best test pilot in the academy. Their deaths at the Samsonite launch pad were not in vain though, as the newly founded LegoLand Aero-Space Authority (renamed Classic Space Command in 1978) rebuilt their reputation as the premier brick-built space agency by launching the "Innovator", also known as LL001 which in early August 1969 made history as the first mini figure - built object on the moon! This rocket and it's crew (Bill Fold, Penny Wise, and S1L-V3R the robot) made history with their two days on the moon's surface, providing the foundations for the Classic Space Moon-base series of missions. The model still separates into sections, but the top most one of these has been replaced, thus reducing the segments to three. The rear of the rocket features five engines, the middle section a smaller bank of five thrusters, while the cockpit section has one singular engine. The cockpit still opens, and as usual should feature this print. The rocket features enlarged tail-fins inspired by 1950's / 60's science fiction. The fins SHOULD be able to take the weight of the rocket when standing vertical, but I'm not 100% sure, so build at your own risk. You have been warned! The height of the Saturn V dwarfs the smaller rocket of the previous design. (The older model is NOT in the LDD file!) The robot is inspired by the robot customer in the 2007 set number 4981 (a Spongebob set called The Chum Bucket), while the astronauts were inspired by the Sandy Cheeks mini-figure in set 3831 (Rocket Ride). The astronauts should have this print on their torsos. Here is the LDD file for the modified Saturn V, which also includes the two bubble - helmeted astronauts and the robot. The model is 100% build able in real life, and should be built by me around Christmas this year. Comments, questions and complaints are always welcome! EDITED 8/8/17: added new pictures and updated ldd file!
-
GRID D4. An Advanced Command Post of the Erotema Army in the middle of a forest area. Mushrooms, trees and grass cover a dark gray land. 1 by green helmet spanish AFOL, en Flickr The crew of a new Rocket Launcher Tank has been called to the HQ tent. 2 by green helmet spanish AFOL, en Flickr As a polite crew they are, asking permission is the first thing they do. 3 by green helmet spanish AFOL, en Flickr And the Officer in charge lets them in. 4 by green helmet spanish AFOL, en Flickr Another view of the Command Post. 5 by green helmet spanish AFOL, en Flickr Inside the tent... 6 by green helmet spanish AFOL, en Flickr And the orders are given soon... 7 by green helmet spanish AFOL, en Flickr Other views of the rocket launcher. 8 by green helmet spanish AFOL, en Flickr 9 by green helmet spanish AFOL, en Flickr The real thing is that I have been inspired on the US MLRS, because I refused to reuse -again- the SPH hull for another build in the same campaign, but it would have worked too. This design lacks the aft drive sprocket and there is a stud separating the 3rd and 4th wheels. This is a classical Christie drivetrain without support rollers. A remotely-operated .50 HMG on the roof provides light defense against infantry. The launcher has 12 cells, each of them capable of storing any missile or rocket up to 600 mm (approx, 2 studs are 68 cms) in diameter and 4 meters in length (approx). There is another version with 48 rockets. You´ll see it soon... Enjoy! -
(When the base and any other digital creations are built in real life, I will add those pictures into this page.) This is the beginning of a journey through the wormhole to a mini-figure called Benny and a civilization on the cusp of greatness. His continuing mission: to seek out new lifeforms, to explore unknown worlds, all in the name of of science and awesomeness. The year is 1980-something, the name of the theme is Classic Space. Classic Space fortress walls The base as it was ordered... will post a picture of the complete setup when built in real life. Here is the front gate of my space base to let the train (or road vehicles) through. It can safely open and close still using the HoG (Hand of God) method without impacting the flow of 9v current (still need to add those 9v tracks..) through the rails... though I wouldn't suggest driving through it with the door closed! This is one of twelve walls sections, held together with the other modules by four Technic pins.(two on each side) This is one of four of the corner modules. I redesigned these since last time to be less parts intensive and have fewer gaps in the wall. Astro Bot Recharge / Repair bay The inspiration behind this large robot-recharge port model is mainly inspired by the mech repair bay from 2006 set 7709. (Sentai Fortress) from Exo Force. I can attach the robot to a small mound behind each foot, where it holds it there by two studs per heel. The dark gray thin sidewall pieces located on three sides of the foot make sure Astro Bot 33 won't wiggle side-to-side and disengage from his charge port prematurely. The wall supports the mech repair bay and also gives me another two brand-new wall sections (in length) in for the base to play with at the same time! Classic Space HQ / Benny's skyscraper - 76038 MOD This building was inspired by my brother's take on set 6398, Central Precinct HQ. He added a back staircase module (which I have removed in favor of an older 2015 Avengers tower-inspired model / MOC I made a couple weeks back), while I removed the prison cell and changed the color scheme from white and black to blue and white with trans-yellow glass. The windows and doors were also modernized, and the large spinning sensor array added to the roof. I've also added connectors to the main base walls, which means the building is fully integrated into my Classic Space base. As previously stated, the rear was inspired by set 76038, Attack on Avengers Tower, from the Age of Ultron movie. This ultimately meant that the 1990's-style model's floors had to be stretched upwards by two bricks each in height to match the newer model's floor-plan. I really like the sleek wraparound window on the top floor of the building, as it is where personal Benny's office is. He gets to look out on the space base, and marvel at how things have changed since his creation in 1984. The right side wall opens up to reveal the inside of the building. Ground floor is official meeting space, second and third floors are for monitoring the radio telescope and other such devices across the galaxy. Fourth floor is the break room, while the fifth floor is Benny's personal office. (Note: On the outdoor patio on floor three is the monument to Jens Nygaard, the gone-but-not-forgotten creator of Classic Space.) The rear tower folds open for access too, and like the side wall, locks shut on a Technic pin. Here you can also see Benny's desk. Lunar Crater Crawler vehicle This model is based off 60192 (Arctic Ice Crawler) from the 2018 CITY Arctic theme, this MOD is called the Lunar Crater Crawler and moves boulders with it's larger gripping claw tool. It can seat one fully-suited astronaut figure. It also has printed controls in front of the space seat. Floodlights sit on the sides of the craft, allowing you to see on the dark side of the moon, while there is a clip for a handheld radio should you need to contact the command base. The rear should feature the Classic Space logo on a 4x2 slope, while a bumblebee stripe printed 1 x 2 tile goes above the logo. This printed pieces will be applied in real life once it's built. Lunar Armored Marauder hover-transporter The new set 75311 (Imperial Armored Marauder) has been transformed into a Classic Space version, complete with revised forward-facing side guns. All the hatches still open, but I couldn't use space seats inside this one, but there are plenty (four per vessel) of 2x2 modified tiles with just enough room for air-tanks in the model... at least I hope that will be the case! The rear of the Marauder. I just need to buy two copies of my digital file as shown, as that's at least $15 total cheaper than buying two sets and recoloring them after the fact. Any thoughts on this MOD? Classic 1950's Moonraker automobile Inspired by this recent @hachiroku build here, I have completed this new early 1950's car for Benny, who seems pretty happy with it. Looks pretty classy, right? The two doors open, but the obligatory black space seat is missing, because any more height and Benny would not fit inside. The rear has a license plate, the classic space logo, and two coverings partially obscuring the rear wheels. The roof is held on by four studs, and is as such removable. As a courtesy to the driver instead of the space seat, I have included a light bluish gray upholstery for the back of the seat. Classic 1980's Security Forces Jeep (x2) This model was heavily inspired by set 75916: Dilophosaurus Ambush from the first series of Jurassic World sets. I have turned that jeep into a Classic Space vehicle by subtracting most of the features and adding the CS logo to this piece on the trunk and a space seat for the driver. This CS version has a trans-yellow windscreen and a revised roll-cage. The rear of the vehicle has a spare tire, license plate and tail-pipe while the roll-cage folds back to allow for you to place the driver in the seat. Cosmic Explorer This is a heavily modified set 70816 (Benny's Spaceship, Spaceship, SPACESHIP!) to features a new canopy from set 75176 (Resistance Transport pod) for the front windscreen, plus a rear turret that elevates and rotates in lieu of the radar dish and repair robots. To match the new canopy, the crew quarters were enlarged and opening roof remade, but the wings still fold out via the same Technic mechanism as in the original set 70816. More recently, I added a new nose to the ship inspired by DC comics set 76028. (Darkseid Invasion) The rear of the ship features the three main engines. The sensor array that was once near here was replaced by a four-barrel repeating laser turret that can rotate a full 360 degrees and elevate to 180 degrees, allowing for cover fire in almost any direction. The wings fold out if the center engine is pushed inwards, ready for the foam-tipped missiles to be engaged and aimed at any Blacktron III enemies... I did remove those yellow missiles, as they were too touchy and could fire accidentally. The main canopy has been heavily modified to allow for crew to go between the engineering and navigation sections without having to exit the ship. The Unikitty-seat area was replaced with a opening canopy for the engineering and fire-control crew to see outside from their stations near the Imagination Reactor. Deep Space Fighters These ships are deep space fighters of the Galaxy-class. Each seat one figure and have enhanced hyper-drive making it nearly as fast as LL-929. (Benny's spaceship) This ship was designed to be a heavily-armed fighter, and features an enclosed cockpit allowing for long distance travel such as from system to system if in an emergency. The rear of each of the two ship's features two engines made up of four smaller rockets. Here is the cockpit, which can seat 1 pilot figure per ship. Interstellar Frigate I really like this ship and have since I first saw it, I just had to wait for the instructions for set 75293 (Resistance IT-S Transport from Star Wars) to come out to make sure it could be built in real bricks with the changes I had in mind. (which were quite a lot!) I'm so glad I chose to do it in LDD first before just buying random bricks, as it required SO many modifications to the design (including an actual windscreen and extended cargo bay!) and changing other colors, that I would have been completely lost just swapping parts out at random. The eight engines are attached in a completely different way to the set design, as 2 x 4 bricks with three Technic holes going straight down don't exist in LDD. This new design was the only suitable way to get them to work on the ship in a very tight space. Also, I added double raised fins to the rear of the ship, for that extra retro '80's space flair. The cargo bay is quite spacious for troops or freight as it has been elongated by four studs from the set's original length. (You can see it is loaded with five yellow space-crates above) The roof of the cargo bay comes off, while the landing ramps fold up / down for loading or unloading of cargo / security personnel. The front of the ship has a space seat for a single pilot with two large laser forward-facing cannons. The pilot's cabin also features actual controls and a real front windscreen. (unlike the stickers and tiles in the original set!) The cockpit roof folds away, just as it did in the original set, which you can partially see here. K8-E the robot dog - Benny's best friend After meeting the Doctor (Who?) and his K-9 (pronounced Canine) unit, Benny decided he wanted a pet. So he bought himself a retired space police bot named K8-E (it's pronounced Katy) who helps Benny with his maintaining his SPACESHIP! and home base of the fleet. The two robot dogs eventually teamed up to sabotage a Blacktron and Dalek peace treaty from being signed, thus keeping the Universe safe from their plans for conquest for the moment. K8-E even took a laser shot from the Blacktron secondary leader, saving K-9 from being killed in the midst of them leaving the self-destructing Dalek ship. When reunited with Benny and the Doctor a short while later, the robot dog was fixed up and given the nod of approval from the Doctor, and a happy farewell from K-9, who left with the Doctor in the TARDIS to go to parts unknown looking for the Daleks fleeing from their loss at the hands of K8-E & K-9. From then on, K8-E has been keeping Benny company while awaiting the return of K-9 and the Doctor. K8-E is actually modified from set 8399 (K-9 Bot), which is a 2009 Space Police III set. Astro-Bot 33 - Classic Space's Giant Robot You may ask yourself: "Why would the Classic Space fleet want a giant robot?" The answer is a simple one: "Who in their right mind wouldn't want a giant freaking robot!?!?!" This Classic Space version of Build Better Bricks' Iron Giant with the head of the previous @hachiroku version of the model's head added on. (consider it a mashup of the two Iron Giant models!) I made it into CS colors (black, light / dark grays and blue) with red and green light parts, and two yellow / black bumblebee stripe tiles. The rear of the robot. The 4 x 2 slopes on the arms are supposed to have this print. The mouth now can open to allow for posing... but unfortunately, it doesn't play nice with the shoulders, so the mouth must remain closed until I can figure out a better solution. Another thing that didn't work well was the rotating waist: it operated too jerkily and was hard to operate, so I removed that feature. Conveyex Crawler-Transporter This is a heavily modified Classic Space version of 2018 Star Wars set 75217 (Imperial Conveyex Transport). It's length has been doubled and the visible weapons have been removed, to make more room for passengers. Behind the trans-yellow glass of the former cargo-cars are seats, so that workers can get to Benny's space base without driving in themselves. (Call it a commuter light-railroad system, without the "rail" part!) The vehicle can be shortened or lengthened in modular sections depending on the needs of the specific mission, but in this particular case it has two crawler engine units, and two cargo hauler segments that can easily detach for maintenance or to drop more segments in / out. On each of the engine units is the dual drivers compartments, located on either side of the tread behind the square openings. Each car seat four figures, meaning the whole train hauls eight people (+ their air-tanks!). ....and yes, two of the handles on the doors are upside-down in all the pictures. Classic Space figures These are all my Classic Space figures. The thirteen green figures are the soldiers of the group, while while the six red suited people are scientists. The three blue figures are Benny (in helmet), Penelope (with pigtails), and Unikitty who are the officers of the group. The two other figures, (the red android and the robo-dog) are T-3PO, who serves as the translator to other species and computer systems, while the robo-dog is K8-E who happens to be Benny's personal pet / security guard. The astronauts you see here are the famous "Lost Six". These half-dozen brave souls were with Benny in 1988 when the space station they were on was ambushed by Blacktron I forces and blasted into a black hole. Benny managed to escape the station before it entered the gravity field, but only just in the nick of time. (He could not reach his ship mates due to a computer error with the hatch systems.) Benny's suit was damaged in the escape, and he still wears it like that to this day as a reminder of his failure to get his crew off in time. This is the last picture of the Lost Six, with Benny out of frame because he took the picture. (He was supposed to be in the picture, but he forgot to set the timer on that take.) Will we ever see these brave men and women again? Only time will tell! Meet AstroKitty (in blue) and PuppyNaut (in white)! I've had AstroKitty built like this since 2014 when I got Benny's Spaceship (x3) from the original LEGO Movie line. I had to find a novel solution to the head-falling-off problem. (double the body width and pretend it's a bigger spacesuit) I was very sad to see Lego never released a blue one of the upside-down 1 x 3 tile parts with hole used in the newer Unikitty! sets seen around 2018 to correct this error. I did, however, note the new arrival of Puppycorn, Unikitty's energetic younger brother from the TV show and was disappointed to see he never had a Classic Space variant, besides the "Alien" version. (which I don't count as actually being Puppycorn.) So, in short, I made one from his Dalmatian costume, made to be double wide like AstroKitty. Sadly, there is no Classic Space logo on Puppynaut, as there is on Astrokitty. (This drives my OCD nuts!) ...oh, and they have headlamps on both their helmets, to provide light in dark environments and a convenient hole for the unicorn horn to fit into. I have used what was left of the word astronaut as originally worded by LEGO, as in ASTRO goes with KITTY; so thus PUPPY gets hitched to NAUT. Thus, we get PUPPYNAUT to describe him. EDITED 5/21/21 added some newer models to the post. As usual, Comments, questions and complaints are always welcome!
-
http://i.imgur.com/FL5Wuqu.jpg The rocket's crew. Based off of the original nexus astronauts. http://i.imgur.com/QHedRAf.jpg The rocket itself, which is built using the main rocket instructions but has many changes. I hope you enjoyed my MOC, and I apologize for the blurry pictures that were originally there. Edit by Hinckley: Pictures turned to links due to violation of size restrictions. Please see the Site Guidelines and adhere to them when posting. Thank you.
-
This LEGO set is inspired by upcoming human missions to Mars. According to some present projections we can expect first humans on the Mars surface sometimes after 2030. In this LEGO Ideas project, 4 crew members of the Mars orbital vehicle ‘’Elijah 1’’ are orbiting the Mars and making preparations for landing on the Mars surface to collect some soil and rock samples. As the Mars gravity is only 0,376 G and the air pressure is avg. 600 Pa the vehicle doesn’t need ablation shield and the fuel requirement for descent to Mars surface and ascent back to Mars orbit is much lesser than one required for breaking from Earth’s gravity. The command and orbital module is fully detachable from fuel tanks and rocket engines so you can use them for various space missions. The command module has the space airlock so the astronauts can exit the module and make needed repairs on the vehicle if needed. This set can easily be combined with other LEGO Mars sets.
-
I made this exiting project because I think people will support it.This is an rocket that NASA will launch in 2030,without crew.If you want to support this idea,link is here:https://ideas.lego.com/projects/9651c3c0-bf30-4f6e-a224-d3a61d7c548cHere are some attractive pictures of my rocket: Link for all my projects:https://ideas.lego.com/profile/Good Old Dude/projects#search/s:most_recent Thanks for support!
-
There was a time that a big piece of brightly colored plastic with some lights on it, gently rocking back and forth, could make us so happy. Coin operated rides are something you grow out of, though, so it has been a long time ago that I enjoyed riding on one of these. Luckily, it turns out that building one is definitely a joyous activity! [MOC] To Space and Back for 50 Cents! by Bert Van Raemdonck, on Flickr The motivation behind this build was the LEGO Ideas "Moments in Space" contest. The objective was to build a small creation in the theme of space. It had to be in the same vein as those small promotional sets you get for free when you spend enough in the LEGO Store or at Shop at Home. I tried to follow this guideline as well as I could, really trying to design a promotional set. One thing I wanted to include, was some kind of mechanical play function. I recently acquired the nutcracker promotional set, and I found myself really enjoying fiddling around with it, endlessly actuating the lever: motion just fascinates me. My mind immediately jumped to the concept of a coin operated kiddie ride, as it moves so hypnotically and since it fills me with warm memories. I started by creating a mechanism that creates a smooth and somewhat realistic motion with a compact mechanism, to keep the build somewhat in proportion with minifigs. In the end, I'm pretty happy with how nice the motion looks, and I'm sure I would play with this endlessly! This motion is made possible with a bar mechanism attached to the sun-shaped dial. I spent most of my time tweaking the positions of the joints to make the motion as realistic as possible. I also used friction pins in the hinges so you can leave it in any position and it will stay in place, so you have more options for display. [MOC] To Space and Back for 50 Cents! - On the Operation of Rockets by Bert Van Raemdonck, on Flickr I also tried to make it as displayable as possible by first of all making it look like an actual kiddie ride such that it should be right at home in a Town layout outside some big store or in a mall. So the rocket got a shape that would be appealing to children nicely fat and round with an interesting shape of the nose (for those who were wondering, the rounded tip of the nose cone is one of those pieces that are the lower half of a balloon), nice lights, a steering wheel that does absolutely nothing but makes all of the difference to children, the typical slanted coin slot and stairs at the back to at least give some explication how that kid got up there. To make it more attractive, I made the base entirely in the space theme. The mechanism isn't actuated by some obvious crank, but by what looks like a sun, which totally blends into the base. All other planets in our solar system have been included as well, with colors and sizes as close as I could get them and a fun little combination of parts to create Saturn. With all of those touches, I hope it looks convincing enough that children would beg their parents for a coin to have a ride on this thing! [MOC] To Space and Back for 50 Cents! - Please, Mummy, Please, Please! by Bert Van Raemdonck, on Flickr That's it! I hope you like it and brought back some wonderful childhood memories! It certainly brought back the same level of enthusiasm for space as when I was a child. Maybe the Falcon heavy launch had something to do with that as well... Anyway, check out all of the contest entries for more spacey fun in a tiny package! ________ The LDD file for this build can be found here.
-
Hi Everybody, I want to show you my Army Rocket Launcher Truck Transporter. This Instruction Tutorial shows, how you can build the Truck with LEGO. I used Tan & White Bricks for the Truck, to show the winter - snow digital camoflage
-
Hi Everybody, I want to show you my Army Rocket Launcher Truck Transporter. This Instruction Tutorial shows, how you can build the Truck with LEGO. I used Tan & White Bricks for the Truck, to show the winter - snow digital camoflage
-
Introduction; This MOC is my first attempt, specified in landscape, of this size. The Story; "... In a galaxy far far away, somewhere in one of its corners, there is an unknown and isolated planet. In the center of the area where life has been developed, lies its oldest structure. A stone column with unknown carvings. But this is not the only peculiar thing about it. Every year, it lights up on its own and an abrupt hum is emitted. The next moment, something magical is happening! It's like the whole planet is coming alive - a heady aroma is overflowing everywhere, the flowers bloom, animals wake up and everyone enjoys this magical moment. This day has arrived, and all three tribes of the planet have gathered to celebrate the day of life. Everything rolls pleasantly, until a clank and a thunder shakes the calm atmosphere that prevails ... " 1. Honoring the Monolith MOC by George Patelis, on Flickr 2. Crashing Site 3. Crash Crater 7. The Ceremony 8. The Stream I am looking forward for your comments! You can find more pictures of my creation on my FlickR
-
Hello, this is a rocket that I designed to look like the standard simple rocket design. I haven't found a very strong way to attach the bottom to the main body, so if you have any suggestions for me about how to improve that, I would really appreciate it! https://image.ibb.co/iLfVLn/Simple_Rocket.png Here is a tutorial on how to build it: If you like it, feel free to support it here: https://ideas.lego.com/challenges/1b817aba-3990-4e6d-a17f-7a59a948d02f/application/fad3dc1d-9646-4621-9448-7dd85fad4bdc
-
What do you guys and gals think of my first Lego Ideas submission? Forgive me if I'm not posting on this site correctly...I'm new. https://ideas.lego.com/projects/1d1b481c-e8b4-4dda-99f3-ec6243139099 -
Hello all,I've been so excited for the release of LEGO's Saturn V Rocket that I have been slowly designing and constructing the mobile launch tower and crawler to create a more complete display look! I will admit, throughout the process I came across other folks creations (Eiffleman, Valerie Roche and Emmanuel Urquieta) and borrowed some of their designs/ideas to improve and implement into my creation. It does not have the cool playability features as theirs do! IMG_20170709_130956846 by Anthony Foss, on FlickrThe crawler is built off the pictures sent into Lego Ideas by Eiffleman. I had to reinforce the crawler to support the weight of the tower. The crawler essentially collapsed under the pressure of the tower and rocket positioned on top the first go around :)The tower is a relatively easy build. Each of the levels is essentially the same. For the white piping running up the front side of the tower I used a flexible rubber hose, similar in diameter to the rigid pneumatic tubing LEGO uses (saved a little bit of money). Stability becomes and issue the higher you build. It works but not as sturdy as I would like. A solid base is a must. The catwalks are a lot of torque on the tower than it seems. I went through a few designs before I got one that doesn't sag.It was nice to see one of these in person instead of a LDD image. https://flic.kr/s/aHsm4uqqFD
-
The new rocket launcher tank is undergoing tests. For so, and in a combined exercise with SkyPie, who will check the accuracy of the new system, a test has been scheduled. The MLRS tank and a support crew arrive at the designated area. 1 by green helmet spanish AFOL, en Flickr Detail of the tank and support vehicle. This rocket launcher tank can carry 2 24-rocket containers. 2 by green helmet spanish AFOL, en Flickr 2 1 by green helmet spanish AFOL, en Flickr 3 by green helmet spanish AFOL, en Flickr Erotema troops preparing the test. It is important to be ready for contingencies, such as a faulty rocket. 4 by green helmet spanish AFOL, en Flickr After a short time, the 24-rocket container is loaded in the launcher. White missile tips indicate they are dummy warheads, with guiding devices but a small explosive load, just to verify whether they fall in the designated area or not. 5 0 by green helmet spanish AFOL, en Flickr And the fire order is given 5 by green helmet spanish AFOL, en Flickr 5 1 by green helmet spanish AFOL, en Flickr 5 2 by green helmet spanish AFOL, en Flickr But one of the rockets had a malfunction and fell a few meters away from the launcher, beginning a small fire 6 by green helmet spanish AFOL, en Flickr As well prepared troops they are and fully aware of the importance of environmental protection, 2 soldiers put the fire out quickly 7 by green helmet spanish AFOL, en Flickr 7 1 by green helmet spanish AFOL, en Flickr 8 by green helmet spanish AFOL, en Flickr But the dummy rocket still has an explosive load inside. UXOs (UneXploded Ordnance) pose a threat to everybody, so the rocket must be disposed of. One of the soldiers in a bomb suit will blow up the rocket 9 by green helmet spanish AFOL, en Flickr 10 by green helmet spanish AFOL, en Flickr The EOD technician moves back and takes cover for the final blast… 11 by green helmet spanish AFOL, en Flickr 11 1 by green helmet spanish AFOL, en Flickr
-
Hi guys At first, we want to introduce ourselves: We are three excited Lego builders: Budo, Paliason and Bedo. Each of us has built many of our own MOCs in the past. Before the recent, we decided to do something together. The main condition was to do something untraditional, original and with many details. This is the Lego project, which we will introduce to you now. It is the scene from the PC game Command & Conquer: GENERALS and its expansion ZERO HOUR. Three factions fight against each other: USA, CHINA and GLA. USA: CHINA: GLA: Our common goal is to make a large map of approx. 6.25 square meters and on it the combat scenes of vehicles and the infantry of all three opponents. The map will also include several civilian objects (farm, houses), industrial buildings (Oil derricks) but also large USA base. The model will be dedicated to exhibitions and commemorations of the great PC game C&C: GENERALS, at this year's 15th anniversary of this masterpiece. Finished 3D CAD models: USA - Vehicles: USA - Structures: CHINA - Vehicles: GLA - Vehicles:
-
Hi, I'm new I realise that LDD MOCS probably aren't everyone's first choice and I myself would much rather see one of these in the flesh than just on a screen but of course the availability of parts, prices and time prevail. We'll start with the less impressive of the two I have to show ;) That appears to have worked, so fair enough. It's Stephenson's Rocket only it includes the provision for a face should I ever feel compelled to add one. Theoretically it could run on a layout with something pushing it around but I don't trust the rigidity of it at all. Not entirely happy with the tender because it's so large compared to the engine itself, but it serves. Now for the one I am actually pleased about, an LNER J70 tram engine. I'm not ordinarily one to use SNOT techniques because I never used to be able to figure out how to make everything fit properly (and I still haven't, really) hence the use of those parts that go around minifigs' necks with a stud on the back. I even made a mock up interior for it featuring a boiler and coal bunkers! As well as sort of an underframe with cylinders Have to say, I'm very impressed with the outcome and it's far better than anything I'd ever attempted previously. I'm particularly proud of my solution to shaping the cow catcher. As with the Rocket, however, it isn't self-powered so I may begin work on a Wisbech & Upwell tramway coach with power functions. Thanks for dropping by and let me know what you think - Nick
-
And here comes the latest one: the TX-225 Katyoucha, directly derived from the Occupier tank. TX-225 Katyoucha by Veynom, on Flickr When the Empire asked for a combat vehicle with superior firepower to support first-line troops from behind, Rothana Heavy Engineering decided to modify its somewhat popular TX-225 Occupier by adding a rocket launcher pod on the rear platform. The idea was to boost its tank production and benefit from the existing investments made for the Occupier. The impressive rocket launcher is able to fire its 16 rockets under 14 seconds if necessary with a deadly precision thanks to its mounted sensors. Results were highly impressive and the Katyoucha was up to its promises, able to smash opponent's strongholds, positions, or even any facility with accurate effectiveness and a frightening noise crushing enemies' moral. Unfortunately, the Katyoucha suffered one deadly operational flow: reloading the rockets is slow process, mostly manual. Moreover, the TX-225 could only carry a few extra rockets under the platform and required an additional ammunition carrier to follow. In the end and give these operational limitations, the Empire selected the famous AT-AT and it sounded the end of the Katyoucha. This was a hard blow for Rothana Heavy Engineering. TX-225 Katyoucha by Veynom, on Flickr TX-225 Katyoucha by Veynom, on Flickr TX-225 Katyoucha by Veynom, on Flickr TX-225 Katyoucha by Veynom, on Flickr Compared to the original set, this model has been completely rebuilt from scratch. It is 2 studs longer and external similarities with the set are purposely made, in order to align the Katyoucha with Occupier tanks during upcoming Lego events. PS: as often with my models and their story, everything is completely fandom and not canon. Star Wars Legends brick-based by Veynom, if you wish. TX-225 Katyoucha by Veynom, on Flickr
-
I was initially hesitant to share this model since LEGO discourages sharing ADP entries, but I had to post a video to YouTube for my submission so I may as well share it here as well. Stud.io's renders look better than any photo I could get at the moment, so this is what I have: Rocketship - ADP Submission by jwarner1718, on Flickr The initial idea for this creation was something along the lines of "what if we made, like, a missile, but it was supposed to be flown?" Obviously this has seen quite a bit of refinement but I'm glad it could all come together it time for ADP. The rocketship itself can be removed from the stand and swooshed around quite nicely, and the stand doesn't use any rubber bands or dampers to hold the model in place (the ADP palette doesn't have rubber bands). Rocketship - ADP Submission by jwarner1718, on Flickr The ADP palette also has very strict limits on minifigures, so the submission version gets a simple astronaut. My personal model has a green Classic Space minifig at the helm, and I think he suits it much better. Rocketship - ADP Submission by jwarner1718, on Flickr Finally, a video demonstrating the stand's removable function.
-
As a testrun for my very first tryout of Mecabricks, here's a retro rocketcraft design based upon an original build from Nathan Proudlove: Here are the instructions the recreation was based upon, as put together by Tyler Clites(Legohaulic)... Flickr - Classic Rocket Instructions by Nathan Proudlove ...and here's my 3D recreation of it to view and tinker with at Mecabricks! Mecabricks - Nathan Proudlove's Rocketcraft by Digger of Bricks -
I'ts been a while since I finished this model, probably some months after getting my hands on original Saturn V. The latter seemed lonely on the shelf and it was my mission to build it a company. As an engineer I always admired these large structures but always been too lazy to do something in that direction. After seen the proposal at Lego Ideas for Umbilical Tower, I started to gather ideas, pictures and most important the - bricks. Since 20th of July marks 50 anniversary, it seemed like a good idea to present this project. Therefore I took model from the shelf, dusted of some dust and took some new pictures. The last time I didn't get the time since I was running late for our BrickFest. 1. Planing and Building As any good creations, this started as a plan, something like this: The next step was scaling. I am sorry Sariel, but I am more familiar with pen and paper than your great tool (the top should be at aprox. 140 studs). The internals of the Launch pad was made out studded technic bricks which are quite suitable for carrying a lot of load. These proved vital in the later stage when Pad is occupied with the tower and Saturn V. The outside was tiled with tiles and the building of the tower could go on. The most critical component was how to attach the tower to 4 points, while allowing beams to be at angle in both direction (from the plans and pictures it could be seen, that tower is getting narrower and thinner at the same time). A person is added at the corner to get a feeling of a scale of the tower. The solution is presented here, an angle connector at 157.5°: 2.The Big Thing The result is here: I've tried my best to show the whole thing but my dining area seems too small. It looks more beautiful with Saturn V: And picture from behind: On the top there are some knobs to conrol the support rods, the position of the white room and the top support above the capsule. Please note that crane is also fully operational. Another picture of the top with crane in lift-off position. The central column (gray) has room for an elevator, however it was not added since it would be very difficult to observe White room and the Apollo 11. I hope the astronaut on the plank is not late. And bottom up view. 3. Details Mobile transporter is simplified to the bone: just some necessary things. And of course it should be capable of having a tone of bricks on its shoulders: A functional crane is simple but I hope it adds to the character of the tower Pad is almost clear with exception of some service buildings Some more files can be found at my Bricksafe page. I hope you like it. It's always an conversation starter at home. Please feel free to comment or ask a question. -
I tried to create a list of MOCs that are based on real rockets, spacecrafts or probes (or at least designs of planned real rockets, spacecrafts or probes) with instructions, either free or for money. The list was growing and growing and now it is far greater than I expected: https://kaerodot.gitlab.io/lego-rocket-mocs/ Due to the nature of the universe, this list will never be complete and perfect, so please contact me with ideas for improvements and additions. If you are offended and you do not want your work to be included in the list, please contact me also. Tables can be sorted by clicking on the heading. Some statistics: there are instructions for: 97 different rocket and spacesihp MOCs, of this: 5 different MOCs of Spacex falcon 9; 3 Spacex falcon heavy; 6 saturn 1B; 3 Soyuz rockets; 3 V2; additional 52 different MOCs of spaceprobes; additional 26 launchpads, launch complexes, drone ships etc. If you want to build e.g. mercury rocket, you can just select by the pictures.
