Jump to content

StudWorks

Eurobricks Citizen
 View Profile  See their activity

  • Posts

    287

  • Joined

  • Last visited

 Content Type 

Everything posted by StudWorks

  1. StudWorks
    I'm thinking the 42154 Ford GT set might be the just-revealed track-only Mark IV. I think it makes sense judging that Technic vastly prefers race cars (911 RSR, 488 GTE, Senna GTR, Formula E Porsche, McLaren Formula One, Bolide) over other licensed vehicles. I love Technic cars but can we finally get one with new entertaining functions other than steering, suspension, and fake engine?
  2. StudWorks
    Wow, really special and kind of sad with the letter since it's the end of Mindstorms and all of that. Did you get it from being an ambassador and is this the only one in existence?
  3. StudWorks
    Thanks for the advice! I ended up finding a way for the knee to rotate, getting the articulation I was going for.
  4. StudWorks
    I built it IRL and yeah, while it works it's too fragile. Do you have any other suggestions? Thanks.
  5. StudWorks
    It’s the upper thigh. Any tips?
  6. StudWorks
    I have never built an action figure with Lego before, but after tons of trial and error I'm happy how the legs came out so far. My only problem is I need to find a solution to keep the articulation the legs already have while adding the ability for the legs to rotate for even more dynamic poses. Photos from Studio are below, any advice would be very appreciated, I look forward to making many more figures in the future and I want the articulation to be accurate.
  7. StudWorks
    Just saw the Bolide leak on Brickset. The first thing I noticed is that the front end looks way too flat, and it took me a few seconds to spot the headlights, which happen to be on the fender pieces? With an ugly gap where the piece's left pin hole is? It doesn't look like the real Bolide at all from up front, which is curvy and extremely wide. Surely this set is best appreciated when viewed from the side. Other than that the design looks good for the scale, even though I think the Senna GTR set certainly looks better. I don't think the yellow is a new color, but I'm quite happy to see a yellow sports car in Technic. Finally, something I haven't seen others talk about, the CSR Racing logos. With it on the bottom right of the box and the CSR and Lego stickers on the side of the car, this seems to be a collab with the CSR app. I first played that app even before I became a car enthusiast, and even though it is part of what got me into cars, the app itself compared to the Forza Games is just boring and annoying pay-to-play. CSR somehow still is relevant over six years after I stopped playing it, and even Ken Block has moved from Forza to CSR. So I'm expecting a Lego Bolide (like the Speed Champions cars on Forza Horizon 4) is going to be a gacha on the app (or free if you own the set). If you haven't heard of or played CSR I can tell you more about it if you'd like.
  8. StudWorks
    This is rad! I can't believe how much progress you made physically and digitally in just a little over two months! (I dream of that level of workmanship) Any interest in making a cheaper one with a single BuWizz 3.0 and two BuWizz motors? Welcome to EuroBricks!
  9. StudWorks
    @LvdH That's @lnteknik's F40, @paave's is the 1:10 F40 missing from there.
  10. StudWorks
    @paave I noticed that your F40's Rebrickable page is gone. Do you have any plans on putting it back on RB? I was planning to purchase the instructions soon after tearing apart my 488 GTE.
  11. StudWorks
    @LegoHoops Hi, I just wanted to ask if you would ever plan to make instructions on Rebrickable of your SP3's mods, I would love to add them to my personal SP3.
  12. StudWorks
    I discussed Moyu because @Professor Thaum stated "Other brand are worth a comment if they add something new, not if they are obvious shameless copies." There also isn't any existing talk about Moyu on Eurobricks, it's only on the L**** subreddit. I have not experienced anything from Cada, the "flimsy" issues are not my opinion or from personal experience, it's taken from @kbalage's review on the Italian Supercar, ID AE86, and ID FD RX7.
  13. StudWorks
    Can I discuss Moyu on this thread? They have original 1:8 cars of the Lamborghini Vision GT, Bugatti Bolide, Koenigsegg Gemera, and Ford GT Le Mansory. I don't know who the designer is but they look cool (don't know about durability), whoever they are it looks Lox Lego level exterior-wise. Although, Moyu is kinda owned by L**** (but Moyu doesn't steal designs) and the "brick" websites selling the products I never heard of, big red flags right there. Nonetheless, I have no interest in "Chinese Lego," and that includes Cada. As a big Initial D fan I'm tempted by the officially licensed AE86, FC3S, FD3S, and Tofu Shop, but the cars look very off and RacingBrick's reviews on the AE86 and FD3S show that they're incredibly flimsy. I also watched RacingBrick and Sariel's reviews on @brunojj1's "Italian Supercar" by Cada and it's also flimsy (small crashes bump off a lot of parts) and compared to Lego the binding of the pieces doesn't really match. Plus there's the moral ambiguity of buying something like a Cada set, I'm not a purist (love my BuWizz,) but having non-electronic OG Lego pieces just seems way more trustful and durable.
  14. StudWorks
    This topic has always been on my mind. I always thought making a floating MOC would be a blast (check out this floating Sherp and ZeroBricks' new amphibous vehicle!! ), but I'm worried what would happen to a BuWizz 1.0/2.0/3.0 and PF/CF/BuWizz motors (also wires and lights) if the worst happens, for example, the MOC sinks. Would I have nothing to worry about if I just put all the electronics in a dry rice bowl ASAP? And if something was submerged would it affect the longevity and reliability of the electronics on board? I've also seen Lego offroaders wade shallow water and I've always thought that was so cool, but again, I worry about the water resistance of these electronics, even during a little bit of water exposure compared to submerging. (already got quite stressed when my crawler's BuWizz 2.0 got wet six months ago). Anything I should be aware of regarding MOCs and water?
  15. StudWorks
    Or at least the option to build the headlights opened or closed (although for no clear reason this set, with its "pursuit for perfection" and all, doesn't even have headlights) would have been great. The red panels' black line prints probably won't be ideal for most MOC makers, it's sad how Lego cheaped out yet again by simply adding prints instead of realistic detail/features. I didn't get the $80 book but I would have paid an extra $80 for this already expensive set if it meant more attention to detail instead of cheap solutions. Still a great set, though.
  16. StudWorks
    I wonder if the opening upper headlight covers are able to be achieved with the 42143. By the way @LegoHoops, any news on instructions for all your SP3 mods?
  17. StudWorks
    Cool! This immediately brought a famous Mythbusters moment to my head. In the video below they try putting one front and one rear square wheel 45 degrees, and then test its off-road performance, maybe you can try doing that too!
  18. StudWorks
    Has anyone tried or is considering making the butterfly doors open realistically? I feel like the scoops above the Scuderia Ferrari shields need some realistic detail too.
  19. StudWorks
    Amazing model! I wish Lego could make $100-range Technic sets look as good as this. No 2JZ engine though. Wish it was possible to add a fake engine.
  20. StudWorks
    Has anyone come up with a solution for the loose rear clamshell yet? (My SP3's won't stay up)
  21. StudWorks
    @LegoHoops Are you planning to release instructions for your front fascia/hood mods? I'd like to add them to my SP3.
  22. StudWorks
    Amazing model! I really appreciate the mix of Technic and Creator Expert building this car has, the rollcage and engine/turbo look magnificent! (Even though you have to cut a hose to make the turbo) Have you ever considered making an RC/BuWizz Technic car yet or do you prefer static cars with detailed gearboxes instead?
  23. StudWorks
    @JLiu15 The gearbox is controlled manually, with the paddle shifters inspired by @Jeroen Ottens's DB11.
  24. StudWorks
    @JLiu15 I agree. I built this model in the beginning before I got a BuWizz 2.0, so that and the nostalgia is why I made it an EV3 car. If you asked me, I don't think you should sell your EV3 components, EV3 robotics are still fun today. I bought another EV3 set because I liked EV3 so much, I just didn't know I'd end up making mostly BuWizz cars (I really want a 3.0 and the new BuWizz motors!), but I'm keeping the other EV3 stuff anyways.
  25. StudWorks
    @imurvai Thanks, I’m hopeful that this would be improved in the future.
×
×
  • Create New...