Search the Community
Showing results for tags 'saxony'.
Found 3 results
-
Steam-locomotive DR BR 38.2-3 XII H2 and custom 3D-printed rods
Bricks-on-Rails posted a topic in LEGO Train Tech
Good evening community, Today i want to present our latest realized model. The XII H2 was especially designed for the hilly terrain of saxony. It has been built in Chemnitz between 1910 and 1927. The model consists of approx 1121 parts and it´s about 58 studs long. The model is a customer-wish and it´s designed for a motorization with power-functions as well as powered-up and for sure with the old 9V train-motor. All the electronics like motor, battery-box and IR-reciever take place in the large coal-tender. All the wheels are from Big Ben Bricks. The main wheels are XL-drivers, the wheels on the front-bogie are medium and at the tender are small train wheels. To make this locomotive with the low hanging cylinders suitable for curves, i separated the cylinders horizontally. The upper part is fixed to the main frame and the lower part is connected to the bogie and could swivel left and right. Special attention was paid to the boiler with the golden rings and the golden accents like in the example. The technic to create the boiler rings was taken over from the DR BR 01 of Simon Jakobi (Dr.Snotson). The instruction of the DR BR 38.2-3 is no available on our website. As a speciality i also want to use this opportunity to present our latest news. Since November the 1st we offer different 3D-printed components in our shop too. We offer different rod-designs in various dimensions, as well as rod sets or special components like blind-wheels or customer solutions. This offer is probably most interresting for customers in europe because we´re located in Germany but we ship worldwide too. And here with custom 3D printed parts. -
Saxon steamship | Preservation of the Dresden steamship fleet
Bricks-on-Rails posted a topic in LEGO Town
Dear community, Today I would like to advertise a campaign and present a MOC to you, which basically does not belong to my core competence, but which I nevertheless enjoyed developing very much. But now lets start at the beginning... In the middle of June one of my customers from Dresden wrote me a kind e-mail. He informed me that the Saxon paddle steamer fleet, which is the oldest and largest paddle steamer fleet in the world, is currently in economic troubles. Not only because of Covid-19, but also because of the increased low water in the past years. Locals, fans and friends want to support the association "Weiße Flotte Dresden (white fleet dresden)" with various activities. The idea of my customer was to create a construction instruction for a steamship model and to sell it. A major part of the proceeds were to go to the campaign. I wanted to help. I wouldn't call myself a real fan of steam ships, but after some research I was fascinated by these old heavy machinery, like the steamers on the rails. The problem, clearly, I had never built such a model before, but once my interest was caught and after choosing a suitable original, I started working on it. It gave me great pleasure to see the model grow, also the acquisition of new building techniques from the sector ships was exciting. But soon it became clear that a scale model would be about 1.5m long. This is of course way too big to make a instruction for private customers. So I designed a model in reduced size. I paid special attention to the recognition value by the colouring and the proportions. Various details were reproduced in the exterior and on the decks, but also in the interior. For example the steam engine, which can be driven together with the two paddle wheels by a Power-Functions or Powered Up motor. The model is built in minifig size. The individual decks can be removed individually and the interior can be played on. The instructions are available directly on our homepage or in our Ebay-Shop for 14,99€ / $17.99. From each sold steamship instruction, we pass on 11€ / $13. We support the crowdfunding initiative "Preservation of the Dresden Steamship Fleet", which was founded by Michael Hillmann. Further information about the initiative can be found here. Many thanks and best wishes Martin | www.bricks-on-rails.de Inspired by the steamship "Dresden" The lifeboat is also present The roofs can be removed, the bridge offers space for the captain There are several seats at the rear, the lower deck is not equipped. The view of the "steam engine" In the front saloon there is, besides some seating, also a small galley The ship is divided into individual modules The dimensions of the finished model -
Dear LEGO® Train Fans, (You can found a german translation here.) We’re planning a new event for lego train fans, who want to be different then other lego train exhibitions and so we're proud to present the “Bauspielbahn 2019” in Schkeuditz, a town next to Leipzig, Germany. Schkeuditz is next to the Leipzig airport and it’s easily accessible via the Autobahn A9 and A14. "We" - these are a handful of lego train fans from leipzig. In last five years we were part of a lot of lego and model train exhibitions all over germany. But now it's time to cook our own soup and we want to make some different like other train shows. the 'Bauspielbahn 2019' will take place from 14th to 16th June and is primarily intended as a event for LEGO railway fans to get to know each other, assemble a huge common layout and to play together. The exhibition will be open for the public on 15th and 16th . Welcome is the entire range from 4.5V to the new Powered up, from the more classical station to the shrill fantasy landscape. As a single model or contribution to the common layout. For the joint layout, the assembly is planned for Thursday (13th), single layouts/mocs can be build up on Thu or Fri. Over the days, we’ll do sightseeing, have barbecue in the evening (depending on the weather) and introduce every tourist trap in Leipzig to you. You can camp on the enclosed grounds or park a caravan there (toilet on the premises available, shower unfortunately not); Hotels in different price categories are available in Schkeuditz, we are happy to help you with addresses. Please don’t hesitate to ask questions, should any occur. Invitation to a Train Enthusiasts Weekend From 14.06. to 16.06.2019 Goal We would like to use the weekend to assemble a common train layout, with LEGO fans from everywhere contributing their modules. Anyone can take part, as long as the segments meet the requirements listed below. A prior registration is necessary to enable us to plan the layout of the railway. Any kind of modules with e.g. train stations, connection tracks or just regular tracks, landscapes etc are welcome. (Maybe you know the modelrailroad - Meetings like FREMO - or others.) pictures are from our lastest exhibitions. but the layout of the get-together-weekend / Bauspielbahn 2019" will look some different, of course. Location We have gained the opportunity to use the Historic Tram Depot Schkeuditz as fitting venue to assemble our modules. It’s not just its history that makes the old depot a fitting location, but also its size. The available hall area is about 1000 m2 and well lit by skylights. Exhibition The event will be open to the public during the weekend. Aside from spectating the traffic on the main installation, visitors will also be able to see single exhibits with models or segments that couldn’t be integrated. Common layout We will be contributing multiple segments to combine with yours for a large installation with diverse train routes. Modules that fit our specifications would be appreciated, but are not necessary. The detailed methods of construction and basic requirements will be published during the next few weeks. However, segments with differing designs can still be utilized. The main routes of the common layout will consist of 9V tracks, operated with the classic speed regulators. Multiple electrically separated routes are planned, to allow for power supply for the individual modules and to enable the simultaneous operation of multiple trains. Non-electrified tracks can, depending on the available amount, be used for connection tracks or individual routes. The same applies to 12V tracks. Differing types of tracks could also be connected via train stations. Every module of the collaborative layout will require at least one track with possible connections to other modules, ideally on multiple sides. Exceptions are welcome, but need to be agreed upon on an individual basis. However, the final layout can only be determined after all participants have registered. Individual modules and installations. Any model related to trains is welcome and can be displayed on additional tables. Registration Participants can register with their name and a short model/modular description until Sunday, 31.03.2019 at eisenbahner@lbrick.de. We reserve the right of admission. To allow for the best possible planning we require specific information from you. After initial registration we will send you a form for the specifics of your modules. Please fill it with all the information about your contributions and send it back to us. I hope we will see us in June. Michael / MTM