Lordofdragonss Posted March 26, 2010 I don't know whether this has already been posted - but I'd like to get amobile phone because the walkie-talkies for minifigs fit very well concerning firemen or policemen - but not concerning regulary citizens which want to talk to their friends, partner and family when not at home. Klaus-Dieter But cellphone exists. It's looks good with minifigs, but they need to make it black.. Share this post Link to post Share on other sites
lightningtiger Posted April 7, 2010 First, both new construction and fire helmets with face shield mounts like current real ones do. Second, more tools - a paint brush and scraper for the house painter, spatula and ladle to suit current saucepan/frypan for the chef, these are just simple starters. I'm a conformist! ! Share this post Link to post Share on other sites
-zenn Posted April 7, 2010 I would like to see this wedge in the color white. Share this post Link to post Share on other sites
jonwil Posted April 16, 2010 I wish for this part: http://www.bricklink.com/catalogItem.asp?P=2436 only with the part that faces sideways being as thick as a regular plate. I also wish for a part that's like this one: http://www.bricklink.com/catalogItem.asp?P=87609 but it is only 1 x 6 instead of 2 x 6 Share this post Link to post Share on other sites
jonwil Posted April 17, 2010 I also wish for a 1 x 4 x 2 window in the new window series. And an 8-wide version of the 1 x 6 x 3 flat windscreen (in clear and trans-black please) Also, the 1 x 6 x 3 windscreen in clear please. Share this post Link to post Share on other sites
M'Kyuun Posted April 19, 2010 (edited) While I'd love to see an inverted form of every slope and wedge, the ones a lust for most are the inverted cheese slope (I think everyone wants that one) and an inverted 18 4 x 2 slope. And a Convex cheese slope would rule. Especially with an inverted form. Seconded! Additionally I wish TLG would make inverted slope pieces to match this: http://www.bricklink.com/catalogItem.asp?P=4871 and its 4 stud long version: http://www.bricklink.com/catalogItem.asp?P=4854. I also wish they'd make half versions of both of these parts (split down the middle of the plate area)..it'd be great for making tandem landing gear or bomb bay doors, and they'd match up perfectly when closed. I also second brackets where the side piece is as thick as a standard plate. Additionally, in the technic arena, I wish they'd make this http://www.bricklink.com/catalogItem.asp?P=32013 , but with a technic pin connecter instead of an axle connector, i.e. half of this http://www.bricklink.com/catalogItem.asp?P=75535b. T'would be very useful, esp for mecha builders. As for bricks and such , I'love to see this http://www.bricklink.com/catalogItem.asp?P=4865 and it's 4 stud long varient with studs on the outside of the panel, as well as http://www.bricklink.com/catalogItem.asp?P=47905 with an axle hole, and this http://www.bricklink.com/catalogItem.asp?P=4595 realized as just a 2x1 modified brick (no stud or tube on the ends). Actually, I'd love a whole assortment of bricks with studs placed low, not to mention this http://www.bricklink.com/catalogItem.asp?P=87087 with an open back like the headlight brick. Edited April 19, 2010 by M'Kyuun Share this post Link to post Share on other sites
jonwil Posted April 20, 2010 I would love a 2 x 2 plate with a hole in the center (like the 2 x 4 technic plate only 2 x 2). And the same but in a tile. Share this post Link to post Share on other sites
Ezechielle Posted May 26, 2010 Headphones! For the police or emergency services. It could also be used for citizen listening to their music with a walkman They would be made in some kind of rubber/sof plastic to fit with as many headgears as possible. Share this post Link to post Share on other sites
jonwil Posted May 28, 2010 I want more blond (i.e. tan) hairpieces. Like this one for example http://www.bricklink.com/catalogItem.asp?P=62810 Share this post Link to post Share on other sites
The Yellow Brick Posted August 8, 2010 (edited) We have had the 1x1 , 1x2 , 1x3 , 1x4 and 1x6 but why not a 1x5. Edited August 17, 2010 by The Red Brick Share this post Link to post Share on other sites
prateek Posted August 8, 2010 I want a corner 1x1 slope. It's so annoying when you are making a sloped surface all around a model, but you can't go around a corner without it messing up the slope-y-ness. Share this post Link to post Share on other sites
earthnite Posted August 11, 2010 i would like a stud that is double the height so it would be a small cylinder the size of two studs end to end according to this picture, the piece is a cylinder with the diameter of 3, and the height of 2 this would be good for adding pieces upside down in small areas - a simple but effective piece Share this post Link to post Share on other sites
Ogre Posted October 28, 2010 Personally, I'd like to see a double-sided 1x1 plate, with studs on BOTH sides. Share this post Link to post Share on other sites
Flare Posted October 28, 2010 Sorry if I'm wrong (and if I'm mini-modding), but isn't there already a topic for this? I'm pretty sure there is... Share this post Link to post Share on other sites
escortmad79 Posted October 28, 2010 There's already a topic: http://www.eurobricks.com/forum/index.php?showtopic=26673 Share this post Link to post Share on other sites
gotoAndLego Posted October 28, 2010 I would love a 2 x 2 plate with a hole in the center (like the 2 x 4 technic plate only 2 x 2). And the same but in a tile. With an axle or pin going through the hole, how would you attach anything to it? I know you could cap it with a dome, cylinder, or cone, but what other usage are you thinking of? Share this post Link to post Share on other sites
Ogre Posted October 28, 2010 My apologies. I checked five pages of topics. Guess I should have looked back further. Share this post Link to post Share on other sites
Ogre Posted October 28, 2010 Double sided pieces with studs on both sides in these shapes: 1x1 plate, 2x2 plate, 4x4 plate, 1x1 round plate, 2x2 round plate, & 4x4 round plate. I've made my own double sided 1x1 round plate by cutting this piece: http://www.bricklink.com/catalogItemPic.asp?P=4081b Ending up with a double sided 1x1 round "plate" and a regular 1x1 plate. Yeah, I'd LOVE double-sided plates. They would be MOC-tastic! Share this post Link to post Share on other sites
prateek Posted October 28, 2010 You didn't find it because you probably didn't check in the Embassy Share this post Link to post Share on other sites
LegoDad42 Posted October 29, 2010 Yeah, I'd LOVE double-sided plates. They would be MOC-tastic! I agree. Double sided plates of various sizes. I believe Megablocks has a double sided 2x2 plate. Also a large baseplate that is the normal plate thickness. Not a thin baseplate that you can't attach anything underneath it. A circular large baseplate could be fun too. Share this post Link to post Share on other sites
Ogre Posted October 29, 2010 (edited) You didn't find it because you probably didn't check in the Embassy No, I did not. Never crossed my mind to check there. *edit* Until AFTER I had started this thread and somebody posted the link. Edited October 29, 2010 by Ogre Share this post Link to post Share on other sites
escortmad79 Posted November 2, 2010 One of these with studs on both outside sides Same with this one, studs on the side face: Share this post Link to post Share on other sites
buddy Posted November 2, 2010 Great ideas escortmad79, I would like to see elements like that in the future, they would be very useful! ~buddy~ Share this post Link to post Share on other sites
legolijntje Posted December 20, 2010 (edited) I would love to have the parts from Barman. They are designed very well and are also very useful. Some examples: Edited December 21, 2010 by legolijntje Share this post Link to post Share on other sites
Klaus-Dieter Posted December 21, 2010 I want a new trunk door with window in it like this classic one - but which fits with the new hinges. Klaus-Dieter Share this post Link to post Share on other sites