Search the Community
Showing results for tags 'transformer'.
-
Tank Brothers - mini tank troop. It is made of 2 Short Range Tanks, 2 Long Range Tanks, 1 Spy Drone and 1 Commander Tank. These 6 tanks can combine into a big combat robot to defeat more powerful enemies.
-
Back in 2017, I finished my second version of the Koenig Monster from the Macross anime series. My first version was about another third larger, but the joints just couldn't handle the weight, and I subsequently decided to downsize and try again. Fortunately, I was able to make it work. Initially, I wanted to use a two-tone tan with red accents as the color scheme, based upon some art I found online, but as I worked on fleshing out ideas in LDD, I discovered to my dismay that a number of the parts I needed weren't available in the tans at the time, and having accumulated a lot of blue and gray, decided, like my first attempt, to just build it in Classic Space colors and styling. It stands about 15 and a half inches tall to the tips of its cannons, transforms without removing parts between all three modes, is fully articulated, and features retractable landing gear in shuttle mode. Since these pics were taken, I've since updated the canopy section with a more line-art accurate access panel using the 4x4 trans-yellow dish from last year's Batcave set. Eventually I'll take some pics. Hope you like. https://www.flickr.com/photos/95379588@N08/44181063412/in/album-72157666939175729/ https://www.flickr.com/photos/95379588@N08/42422129770/in/album-72157666939175729/ https://www.flickr.com/photos/95379588@N08/44181265472/in/album-72157666939175729/
-
Mini size Combiner Transformer Robot. I think if I try to build full version combiner mech (6 vehichles), it would be too big one and need to many bricks. So I built this combiner made with just 3 heavy vehicles.
-
Name: Apeface Allegiance: Decepticon Subgroup: Headmaster Horrorcons Alternate modes: Jet plane and gorilla Motto: Obnoxiousness is not a problem. It is an art ========== Actually this guy was never in my to-built list.. but since this is "year of triple changers" for me, and Apeface is sort of a low-hanging fruit compared to other triple changers when it comes to complexity, I give that a shot. Compared to the original G1 Apeface.. some compromises must be made in the form of a different-looking jet mode. Hope you guys like my rendition! The ball joints used for the gorilla rear legs are too weak to hold his body up. So he can't stand upright . With LEGO Snapdragon I rebuilt few months earlier. (He's not a Headmaster though). To view more photos especially how he transform between modes, proceed to my blog entry below: https://alanyuppie.blogspot.com/2019/10/lego-triple-changer-apeface-part-2-of-2.html Follow me in Instagram please! https://www.instagram.com/alanyuppie78/
-
This mini robot can transform into a big fighter jet. The fighter jet is half as big again as the its robot mode. It has 4 cannons on his arms and legs. The cannons' color is gray. So, that's why it's called 'Gray cannon'. in this video you can also see how I take a film for a stop motion transformation scene. -
3 fighter jets combiner robot MOC
-
Gun Turret Transformer Robot (similar with Overwatch Torbjörn Turret) https://www.youtube.com/watch?v=PrWeya7rzAQ
-
This is my first bad guy character. I think its back looks really cool. How about you? :) I used red, black and blue colors to make it look stronger than previous robots. First of all it can transform into flight vehicle. The vehicle has 2 of forms - normal and hyper mode. And it can transform into marine vehicle also. Check this video to more detailed information!
-
I tried to build a transformer vehicle which doesn't include 1x1 handles (26047), 1x1 clips (15712) and 1x1 brackets (36840, 36841)this time. This LEGO MOC contains 19 LEGO lots and 48 total LEGO parts. Transformation stop motion animation : 00:41
-
This is 'Redman' transformer : Redman can power up with parts :
-
Here are a baby police robot and a small patrol drone. They are not strong at this state. But if they combine into a big police robot, it is strong and fast.
-
This time I built Grimlock transformer robot. My 2nd Tyrannosaurus robot. :)
-
This time I built a typical Japanese super robot style combine robot. If you are a big fan of Japanese robot animation, you must know red, blue and yellow vehicles combine to form one big robot in many of Japanese robot animation and Japanese super sentai TV show. I think it is interesting, weird and funny. But I like the super robot rule.
-
I think Triceratops is one of popular dinosaurs. I like Triceratops too. :) So this time I built Triceratops Dinosaur.
-
I tried to build a combiner robot which doesn't include 1x1 handles (26047), 1x1 clips (15712) and 1x1 brackets(36840, 36841) this time.
-
Micro sized Dragon transformer
-
-
This is another Megazord style LEGO MOC. This is an homage to original Megazord.
-
Broadside is one of my favorite triple changers ever since I set my eyes on his G1 toy photo decades ago. I had a chance to acquire Chinese KO version of him many years ago (bundled together with a few KO combiner limbs) but sadly missed out on it. So I never owned / played with this toy to understand his notoriety as a brick-former in the TF fandom. Anyway... 9 years ago I attempted LEGO Broadside version 1 (below) . VERSION 1 As you can see... the ship mode looks fat and the plane mode has saggy wings. duh! VERSION 2 Few months ago I started this v2 project after I saw a photo of Macross Valkyrie in my FB feed . That's an eureka moment where I kinda got the transformation to jet mode figured out. From there , I took a few breaks in between to retreat, rethink and redo it to get the right shaping in both his alt modes. Inspired by USS Nimitz, the back of the ship mode must be symmetrical to provide more mass to form robot legs, unlike an actual ship show above . Compared to v1, the ship mode v2 here is missing armaments on the deck. This is a nod to G1 Broadside's bio about "his vulnerability in ship mode and the need to rely on his passengers to protect him." USS Titanic is a Transformer too :) One of the transformation step: fold the ship deck to form the jet mode's rear. JET MODE Jet mode was inspired by F-14 Tomcat. Since the ship mode is long, this causes the halved deck to form pretty long wings for the jet. ROBOT MODE! In the actual G1 toy of Broadside, he's equipped with an Axe and also a gun. Here, I've decided to integrate them both as a single weapon (Axe turning to gun)... and it's named Hull-Raiser. :) When not on active duty, he tend to his farm and crops. With fellow triple changers that I built recently, Rodimus Prime and Snapdragon For more photos of Broadside v2 and clearer visuals on how he transform between modes , click on my blog link below: https://alanyuppie.blogspot.com/2019/08/lego-triple-changer-broadside-v2-part-2.html don't forget to follow me below! http://instagram.com/alanyuppie78 https://www.facebook.com/alanyuppiebrick https://www.youtube.com/user/alanyuppie -
This transformer robot's name is White Astronaut. Because the robot mode looks like astronaut. :) This mini robot is a triple changer transformer. It could change into a fighter jet and a monster.
-
This is a LEGO Transformer robot which is able to change into Mini Combat Robot and Combat Helicopter. I spent much more time than the others to make the stop motion animation in this video. I wanted to take a scene of flying helicopter and I tried it actually. But I failed to many times and I had to give up. :( Anyway, my favorite part of this video is the rolling and transforming scene. Don't miss it!
-
Name: SkyTrax Allegiance: Autobot Alt Modes: Seaplane, Excavator This project was Inspired by a sketch shown in TF:Generations book published back in the early 2000's. Since I am a fan of triple changer, I have been harboring intentions to build it one day , using LEGO of coz! And that day finally came (early last year), when I discovered the toy prototype of this TF actually exists ,despite not being used in G1 Transformers (below). What a shame! And off I go! First 3 months progress were really fast and I'm almost done building in 6 months. It took me another year to put a closure to this due to me procrastinating* and felt unsure of its final color scheme. *I actually initiated 5 other lego triple changer projects between this one. EXCAVATOR MODE I kinda lowered my bar here. Usually I prefer to use real working tracks for my LEGO creations. This time around, due to complexity of triple changers... I must implement "fake" tracks. SEAPLANE MODE Propeller was the last thing I applied before wrapping this project up. Initially its a 2-blade prop, but I took the liberty to confirm my design by googling photos of seaplanes to discover 3-blade is much common. ROBOT MODE He ended up top heavy with huge back kibble. Luckily his wide footprints ensured his stability. For more photos especially on how he transforms from 1 mode to another, visit my blog link below: https://alanyuppie.blogspot.com/2020/08/lego-transformer-triple-changer_30.html After this .. I shall return to completing my Astrotrain, Doubledealer and Octane. Do follow me on instragram to see my work in progress www.instagram.com/alanyuppie78
-
Introducing Cpt. Jean-Mech Picard! When I came up with this idea, I thought this was probably quite a common concept for a Lego MOC. turned out it wasn't so, but now I also know why... it took me forever to design a mech that could fit into the model of the Enterprise. So here it finally is. Thanks for checking this out. For more pics head over to bricksafe.com and if you're interested in building one for yourself, instructions are available (though not for free, sorry) over at rebrickable.com. Battling Robo for top shelf domination!!! Live long, and prosper!
-
Hi everyone, this is my first post on Eurobricks. I want to show you a scale model of a High Voltage Transformer in service in High Voltage Substations. This machine is able to supply energy to an entire region. The model was developed on Studio 2.0. Below some pictures. Hope you like it!
