Search the Community
Showing results for tags '75930'.
Found 4 results
For over a year I’ve been modifying set 75930: Indoraptor Rampage at Lockwood Estate, and I’ve finally finished it up. I started by completely removing all of the lab parts in the set. I wanted the place to be more accurate to the movie and feel way more like a mansion. Maisie in front of the Agujaceratops skull. The exterior with masonry bricks, a few new windows, a new doorway, and slopes on the roof. While the movie has lion statues, classic baby T. Rex statues take their place here. “Ms. Dearing, you’re early!” Interior overview Lego’s goblets of plants by the entrance were accurately gold, but unfortunately the real pot piece isn’t available in gold as of now. The right and left sides now connect to other rooms on the bottom floor. Sir Benjamin and the Dimetrodon When the chameleon was made in teal was when I barely realized the piece could be used for a Dimetrodon. I wondered if the rubber mohawk piece could be bent into shape and placed on it without glue or such, but in the end I had to cheat by cutting off a bit of it and using some blu-tack to keep the two attached. Iris and the Velociraptor This diorama came first and is what pushed me to get a Dimetrodon for the other diorama somehow. For both it took some effort to use a stick to move and click them in place between the wall and glass panels. Different angles Lounge area, at least one person who lives here has to like tea. Maisie’s room and the Library I debated turning that whole third floor into either Maisie’s room or Mills’ office, but her room had the door and there were enough unique decor ideas that ended up being the telescope, a nightlight, and a green classic T. Rex as a toy. I’m pretty proud of how the center of the middle floor turned out. I used the brown and black furniture to try to cover up as much of the tan wall as possible. The glass vases of plants worked out great. There’s no other piece like that landscape tile so I was very happy that it exists, and it ended up being an unintentionally accurate decoration upon looking at set pictures from the movie’s production designer Andy Nicholson. The ship in a bottle isn't present in the movie but it’s a reference to how there are docks close to the estate. That table is supposed to be the one found in Mill’s office that electronically displayed Isla Nublar and profiles of different dinosaur species. I didn’t think there was any way to represent that, but some friends gave me the idea to use a sticker from the Dilophosaurus outpost set, so that will be something to use eventually. The Indoraptor may be too big, but Blue can somewhat fit through that door and look like she opened it. Mills’ Office Retained that idea of a table and umbrella holder and gave his space a computer with a sticker from 75917: Raptor Rampage. I'll probably replace that map with the one of Isla Nublar printed on it eventually. I used the portraits of Thomas and Martha Wayne from the 1960s Batman set for both hallways. It would’ve been great if they officially had one for John Hammond. The new transparent piece from the DC collectible minifigure series allowed for that ammonite fossil to be displayed accurately. A simple bust build and a drawer with explorer items on top. Just a look at how the hallways now connect the entire bottom floor together. Eli Mills, Sir Benjamin Lockwood, Iris Carroll, and Claire Dearing. Thanks for looking!
(First off, I want to apologize for these photos: I didn't have an area big enough to handle the four story tall building, so I improvised. It doesn't look very pretty, but it's passable.) I was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House. I made the mansion to replace this other MOC I had made, but don't worry, the other building still exists, it's just empty right now. THE MAD SCIENTIST'S MANSION The dollhouse-style model was built from the set pictures, with the play features removed and opening rear sections added to match the front half. The model also features a round window for letting in moon light in on the mad doctor's experiments, along with lightning rods on top of the house. (for powering his experiments) The rear of the mansion features a back door (perfect for escapes when the locals get feisty about the scientist playing with time travel again!) and the chimney flue. The bottom floor features the living room and dining rooms, while the second floor is the bedroom, study and pipe organ rooms. The third floor features the laboratory for the study of time travel. The rear door to the outside is in this section, while the safe containing the house's title and family paper work is directly above on the second level. This area also has stairs from first to second floors. The left rear quarter features the fireplace and telephone on the first floor and a bed for the second floor's master bedroom. The stairs to the third floor are also on this side. THE WORMWOOD FAMILY AUTOMOBILE The stylish car is heavily modified version of Brick-Link set BL19011 (Vintage Roadster) turned blue. The car model is about 10 studs wide (with a large overhang on each side due to the white fenders on front and rear) and is 36 studs long, front bumper to rear bumper. The car can now seat two mini-figure's in the seating area, and as before feature removable engine cowling sections for a look at the V8 heart of the car. The headlights are now secured more tightly, and the front windscreen glass is now trans-black and not inclined anymore. (it was bugging the heck out of me that it wouldn't stay in place!) The taillights were moved down onto the rear bumper. No real reason for the change, it just seemed like a good idea. THE TIME MACHINE Here is the Scientist's 1920's-period time machine, rebuilt from set 76109 (Quantum Realm Explorers). I fixed the rotating side engines of the original Marvel superheroes set, as these objects are now (mostly) locked in the position shown. THE BRASS AUTOMATON In reality, this is a recolored and modified version of @hachiroku's Iron Giant model. I made it into steampunk colors wth "arching Tesla coils" on the shoulders, and an exhaust steam pipe at the back of the neck, and yes, that is a monocle / targeting computer over the right eye. I am also writing a backstory for the model with inspiration coming from the BIONICLE Generation 1 story-line with the Mata-Nui Robot, the Great Beings and so on. You can see the original model's topic by Hachiroku here, in the sci-fi theme forum. The rear of the robot, with the steam exhaust stack visible. He also has jets in his feet, just like the Iron Giant, but is not self-repairing, unlike his later counterpart. THE END? More may come later, I'm not quite sure on what steampunk thing to build after the robot. As usual, comments, questions and comments are always welcome!
Murdoch17 posted a topic in LEGO TownI was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House, although in blue and white with trans yellow glass. The dollhouse-style model was built from the set pictures and from features from the movie itself, with the fall-apart play features removed and opening rear sections added to match the front half. The model also features a round "time window" for Benny to experiment with in his spare time. As usual, this classic space logo printed piece goes where this 4 x 2 slope is, just below the front balcony and right above the front door. The house without any figures, cars, or giant robots. The very large satellite dish on the roof is so Benny can communicate with the Classic Space fleet in any weather: rain, sunshine, snow, solar wind-storm, or nuclear fallout. Whatever the weather, Benny gets through! The rear of the mansion features a conservatory and the chimney flue, along with a back door and rear porch light. The house folds apart, with the two rear sections opening in quarters up to 90 degrees, while the conservatory opens up to 180 to allow for figure placement. (Up to five Technic pins can hold the model shut at key points for transportation with ease and handling with little fragility.) The front half on the found floor features the entry hall, TV room with couch and dining room. The second floor features the custom-printed super computer (un-printed here in LDD) and Benny's bedroom. The uppermost two floors features the science lab, with the time window and several other science experiments. Here is the huge 1970's super computer LL9000 (custom printed part) which takes up a sizable amount of space on the second level wall just above the entry hall. The right rear quarter features the conservatory and some furniture on the second and third floors, plus the dining room on the first floor. This section also has stairs from first to second floors, plus a '80's video game cabinet (Astro Nut, of course!) on the second floor. The left rear quarter features the fireplace and the stairs to the third floor, plus a miniature space monorail layout and a TV with VCR. This is Benny the 1980-something space guy's 1979 Moonraker made by Neptune Auto Group. The engine has been upgraded from a gasoline chugging-monster into a more environmentally-friendly Hydrogen-3 Fusion engine to turn it into a modern mechanical beast with a retro exterior. Benny added bigger tires to the car to get it over the craters of the small moon where Benny was stationed. The car also has a spare tire located on the opening trunk. The roof is removable, and the three seats can fit figures with air-tanks and helmets. The doors open in the front normally, but in the rear they open in a reversed pattern to create a wider opening. Real life version The building as it sits right now, before it gets torn apart to create the version seen in the first part above. Most of it's parts will be donated to create the mansion. As always, comments, questions, suggestions, and complaints are welcome!
Murdoch17 posted a topic in LEGO TownI was inspired to create this model from the 2018 Jurassic World set 75930, Indoraptor Rampage at Lockwood Estate, with some design cues from set 10228, Haunted House. The dollhouse-style model was built from the set pictures, with the play features removed and opening rear sections added to match the front half. The model also features the round "time window" for the mad scientist's experiments, along with lightning rods on top of the house. (for powering his experiments) Here is the in-universe backstory for the house and the enigmatic Doctor Harold Wormwood: This badly-preserved photograph (from April 1st, 1926) is all that physically remains of the infamous Wormwood Estate, reportedly taken just two weeks ways before Dr. Harold Wormwood started his time-window device for the first / last time, which resulted in a massive flash of light, leveling the mansion and leaving a large crater in the middle of the surrounding Louisiana bayou. Nothing remained of the building, the machine, or the Doctor in the immediate area, and it seems no noise was made during the explosion. Some crackpot "experts" of the time believed that the time window caused the house and grounds to move out of time itself, moving either forwards or backwards depending on the machine's setting. Of course, the truth may never be known, as the sunken crater is now filled with water (and alligators) from the nearby bayou... ...and here is the same picture without the special Google Images filters. The rear of the mansion features a conservatory and the chimney flue. The house folds apart, with the rear section opening in quarters up to 90 degrees, while the conservatory opens up to 180 to allow for figure placement. (Technic pins hold the model shut for transport and ease of handling) The bottom floor features the living room, while the second floor is the bedroom, with bed and pipe organ, plus a beating the still-heart of Dr. Wormwood's beloved deceased wife, Myrtle. The third floor features more crazy experiments, plus the stairway to his greatest achievement, the time window! The right rear quarter features the conservatory and some furniture on the second and third floors. This section also has stairs from first to second floors. The left rear quarter features the fireplace and a frozen fly monster that is all that remains of his first teleportation window project. The stairs to the third floor are also on this side. This car was originally designed by Tom.Netherton1 from Flickr as his Mercedes-Benz SSK 'Count Trossi' (seen here ) I heavily modified it into the car seen here, and it still needs some work to match the online version. It is fitted it with a single driver's seat, spare tire, and a reddish brown paint scheme. The rear of the model features a spare tire and license plate, plus it fits a figure in the drivers seat. This concludes the post for now, as the real life house is on the to-build list, while the car is already (mostly) built in real bricks. As usual, comments questions and complaints are always welcome!