davidmull Posted February 8, 2015 Do Lego do a proper end buffer. Done some looking around but can't find much. I really like this track end piece does anyone know a part number please? http://m.ebay.com/itm/251827771022?nav=SEARCH Share this post Link to post Share on other sites
detjensrobert Posted February 8, 2015 It is a custom piece not made by Lego, so there is no part number. There are some good MOCs out there of EOTL buffers, just look around on the Ideas Pool or MOC pool on Flickr, there's sure to be some there. Share this post Link to post Share on other sites
ScotNick Posted February 8, 2015 There are good ones out there. Here are some examples to give you an idea: Share this post Link to post Share on other sites
Redimus Posted February 8, 2015 I bought some from an eBay seller (I was feeling lazy that day), and they're pretty good (click the picture for link). It's reasonably sturdy (more so in the direction the train will hit than in others) and comes with the strait track which is a bonus. Share this post Link to post Share on other sites
Selander Posted February 9, 2015 (edited) It's really a coincidence. I was just in the process of looking for ideas for a track end buffer when I saw this topic. After a little research on typical look for these items up where I live, I found out these are typically yellow steel beam structures, so I made two concepts from yellow technic beams/liftarms. Designs are simple but very sturdy due to the use of technic parts. Any comments and/or proposals for improvement are welcome. Edited February 9, 2015 by Selander Share this post Link to post Share on other sites
M_slug357 Posted February 9, 2015 @Selander you should make some crash-test videos! Share this post Link to post Share on other sites
codefox421 Posted February 9, 2015 Any comments and/or proposals for improvement are welcome. I personally prefer the one on the right with the curved beams. Looks stunning! Do you have a way to keep the buffer beam from flipping upward? I can't tell from the photos. Share this post Link to post Share on other sites
Selander Posted February 9, 2015 (edited) I personally prefer the one on the right with the curved beams. Looks stunning! Do you have a way to keep the buffer beam from flipping upward? I can't tell from the photos. As shown on pictures, the beam can be turned upwards if you grab it with your fingers and push vertically. However, rolling stock buffers will hit it horizontally, and then it will stay in place as it is supported from behind by the technic liftarms (eg. 32250). I do not plan to do crash tests, but I can guarantee these designs are more sturdy than most brickbuilt end track buffers. Edited February 9, 2015 by Selander Share this post Link to post Share on other sites
davidmull Posted February 9, 2015 It's really a coincidence. I was just in the process of looking for ideas for a track end buffer when I saw this topic. After a little research on typical look for these items up where I live, I found out these are typically yellow steel beam structures, so I made two concepts from yellow technic beams/liftarms. Designs are simple but very sturdy due to the use of technic parts. Any comments and/or proposals for improvement are welcome. What part is that grey piece connected to the track? Share this post Link to post Share on other sites
dr_spock Posted February 9, 2015 Looks like this part: Nice work. Good use of the Technic parts. Share this post Link to post Share on other sites
kieran Posted February 9, 2015 The technic buffers look great. For my eye the curved ones are the way to go Share this post Link to post Share on other sites
davidmull Posted February 9, 2015 Looks like this part: Nice work. Good use of the Technic parts. Never seen that part in a technic set. Might try get a part number they look handy. Share this post Link to post Share on other sites
GallardoLU Posted February 9, 2015 Never seen that part in a technic set. Might try get a part number they look handy. number is 11458 Share this post Link to post Share on other sites
davidmull Posted February 9, 2015 number is 11458 Thanks. Share this post Link to post Share on other sites
zephyr1934 Posted February 10, 2015 It's really a coincidence. I was just in the process of looking for ideas for a track end buffer when I saw this topic. After a little research on typical look for these items up where I live, I found out these are typically yellow steel beam structures, so I made two concepts from yellow technic beams/liftarms. Designs are simple but very sturdy due to the use of technic parts. Any comments and/or proposals for improvement are welcome. I too like the one on the right with the curved bars, very nice (and great use of the 1x1 round plates for detailing) Share this post Link to post Share on other sites
marook Posted May 1, 2016 (edited) I made another version today, after looking at the 1x2 rubber technic element used in the Nexo Knight 'Chaos Catapult'. I came up with this: The Nexo Knights Chaos Catapult sparked an idea about updating the train buffer. The Nexo Knights Chaos Catapult sparked an idea about updating the train buffer. The design ended up working really well. Other views in the album. Still need to refine the buffer design a bit.. Edited May 1, 2016 by marook Share this post Link to post Share on other sites
xboxtravis7992 Posted May 1, 2016 Anybody ever done a US style Haynes buffer? Share this post Link to post Share on other sites
CrispyBassist Posted May 2, 2016 Anybody ever done a US style Haynes buffer? Yes: Did this one a while ago. I'd be happy to share the design, though its pretty simple so you can probably figure most of it out by looking at the picture! Share this post Link to post Share on other sites
LoneBrickerSG Posted May 2, 2016 Yes: Did this one a while ago. I'd be happy to share the design, though its pretty simple so you can probably figure most of it out by looking at the picture! Not to slander your building, but does it actually work? Seems like it would just slide or tumble on impact. Share this post Link to post Share on other sites
Hod Carrier Posted May 2, 2016 Track end buffers are not meant to be hit with a train and wouldn't necessarily stop a train from overrunning the end of the track. You're meant to draw up to them slowly and stop short of them. Share this post Link to post Share on other sites
xboxtravis7992 Posted May 2, 2016 Yeah I don't think real life Haynes bumpers would stop a train either... I've seen a few crumpled up by the coupler on a train car that was accidentally pushed to close to them. I think they only work for really slow freight moves, or just help to remind engineers where to stop. Share this post Link to post Share on other sites
CrispyBassist Posted May 2, 2016 Not to slander your building, but does it actually work? Seems like it would just slide or tumble on impact. It definitely wouldn't stop a train. I wanted to replicate the design of the Hayes bumper rather than create something to stop a runaway train. Like the others have mentioned, I'm not sure these are designed to stop a train at much more than minimal speed. I've seen much beefier ones (including this one) at passenger terminals and other places where stopping a runaway train is much more of a necessity. Share this post Link to post Share on other sites
LoneBrickerSG Posted May 3, 2016 Right, but this is Lego and the cars are very free-rolling most of the time. Share this post Link to post Share on other sites
Rijkvv Posted May 3, 2016 Two sites (both in Dutch) with plenty of examples, both in stopping a train and only to mark the end of a track. Share this post Link to post Share on other sites