Gabor

I'm very happy, to present you today something, which I worked in the last 12 month on! The project is probably one of my craziest MOCs! At first I suggest you to watch this video, if you understand German. It was made on Zusammengebaut 2018. In the interview I tell the story of the creation. If you don't understand German, then please, read further below the video! The idea came into my mind at first in approx 2012. That was the first time, when I swam alone in deep water, in Lake Balaton. And during swimming I saw these ships, and I saw, what people usually are doing on the deck. They are sunbathing, while they hold a smartphone in one hand and something alcoholic in the other one! :D I thought, that it would be cool to copy the scene! The second thing, which influenced me, was our summer holiday in Venice, in 2017. That was the first time, when I swam in the see. And the present from the see was a jellyfish-bite... Well, under the water surface would be three jellyfishes a little bit too few, so I decided, that I make fishes, scuba divers, and a whole coral reef! You can see some crazy plants among the corals: broomplant, flipperplant, hairbrushplant, skeletonarmplant, etc. Some of you know, that in the last 1.5 years I had a store on Bricklink. So I saw usually all of the new elements, and colours. Sometimes I thought, that a part would be cool for corals, so I didn't sell it :) A lot of things, which I did or do in my life, helped to create this MOC! We can see sometimes on exhibitions things, which imitate flying. The solution is usually something trans-clear (Lego bricks, glasses), but I wanted nothing between water and corals. So the only one way was me to hang the whole construction from the ceiling by string, which is used by anglers, so almost invisible! Finally the experience: the visitors often push the tables. If the ship sits on glasses, the first push means a disaster. But with this method the ship is independent from the table, so I was completely calm during the two days. That's the story of my newest creation, hope you like it! :) Thanks for visiting!

Really cool MOC with full of life and interesting ideas and details! My favourites are the colourful houses!

Wow! Superb idea! I really like thet toasts on the top of the building! Real life it would be successful, I'm sure!

@Asper: Thanks my friend! :)

Thanks everyone for your nice words! Thanks! Well, if the cars are longer, the front cars have to be longer, too, but they would be too longer for these strong bends. We always have to do compromises :) Thank you! :) Yeah, I will buy some more track, but on the exhibitions there will be very long tracks. I'm sure, there will be videos about the train, too!

Hi everyone! Fortunately I have the time to share here my newest creation! It's a train and it's the model of an ICE 3. It is 196 stud (157 cm) long and contains more than 3300 pieces, two IR receivers, two battery boxes and two train motors. Hope you like it! Oh, and another important information is, that it will be visible on Zusammengebaut 2016 in November and on Bricks am Meer in April 2017 in Germany!At first please watch these two videos! The first one shows a crash. The place, where I made the video, wasn't horizontal, and on the slope the train got a too high speed The records of the second one were made after I repaired the train. Well, I can say it is quite stable construction, despite the building techniques of the front. During the crash, only the boogies fell down! I'm really happy, that it is ready! It took me almost a year to build and become satisfied with the result. You may know, if someone build a train, the front is the most important thing. If it's not good, it's unnecessary to build the other sections. Everything started with an LDD model from a front-idea. I built something in the program, but I didn't like it. Later it came always into my mind and didn't allow me to be calm. So I started to develope the construction. Some month later it looked nice enough to order some parts and make it in real life. It contained so many interesting and strange techniques, that it was a real challenge to put the bricks together in the program, and with real bricks it was hard, too. And the real 3D model was ugly! But I said, that it has to be possible to find out something, which makes the model better. So I made some changes, and some more, and some more, and finally I liked it, and I thoght that I found the maximum! I stored the train (only the front section) and some other parts on the table in the middle of our house. And one night, I couldn't sleep. I woke up and went out to the table to do something. And I don't know why, but I put an element into the middle of the front. And I said 'wow'! It was perfect (for me of course, for you, I still don't know, but I will read the comments :) )! Some gaps disappeared, some sections got new positions. That element made so big changes on the overall look, that it was incredible! I felt high, but next day I was very sleepy. :D More pictures are available here: http://www.moc-pages.com/moc.php/433076 Thanks for watching!

Thanks, I'm glad you like it! :)

Thank you very much for your comments!

Thanks for the nice comments! I really appreciate them! @JamesJT: Well I guess, that thing with the force and object was in an other movie. If I build a Tumbler in the future, maybe the video of it will show, what happens at the end!

Thank you very much Jim! I'm glad you like it!

Thanks everyone for your kind comments! I'm very happy, that you like it! @TinkerBrick: Thank you! Don't worry about the turbo boost, Bonnie will put it into the car next week. @deraven: It's an early model, so that mode is still didn't exist. @jorgeopesi: Simplicity? No! It was very difficult to find out and build it! (Don't worry, I understand, what you mean! )

Hi everyone! I'm happy to present my newest Lego creation, the completely remote controlled K.I.T.T.! I'm still young, but old enough to know and like Knight Rider. It's the reason, why I recreated K.I.T.T., the main character of the series. Of course with a huge amount of Power Functions! Driving, steering, working scanner and headlights. Six motors, two extenision wires, two pairs of leds, two switches, two IR receivers and an AAA battery box. As many electronic parts, as possible! :D It is my third model at a bigger scale. The building was very interesting. There were a lot of technical challenges with the chassis and the body shaping was difficult, too, because usually I make smaller models. Hope, that I can make more MOCs at similar scales in the future. There are a lot of Lego replicas on the net. For example I found out, that I use the black minifig shields for the wheels. After it I saw, that Firas has already done it! The working scanner and headlights aren't new, too. But! As far as I know, this is the smallest K.I.T.T., which contains these functions! At first please watch the video! Below I tell some things about it, and later there are information about the fuctions and technical detailes! Hope you like it! :) At first I send a huge thank you the three persons, whose names are at the end of the video, for lending me some PF parts, a camera tripod and making the music! It's the first time, that I don't use downloaded music, so I'm very happy! :) Kitt has an enemy, called Karr. Karr was the first car, but he was evil. I built at first Kitt, but later it came into my mind, that it would be more interesting and unusual to build Karr. But almost everyone likes Kitt, and almost noone likes Karr. So finally I decided to put more Kitt scenes into the video and upload the car, as Kitt. I started shooting. I brought out to the street two reflectors, the car and the camera. There are scenes, where you can see two cars together. The truth is that I have only one. After every scenes I exchanged some parts of the body, and continued shooting, without changing the position of the camera. Later I cut the pictures near each other. And it was shocking to watch the scenes on the computer! I thought, that the red light in the dark night will be very impressive and will look very cool. But Karr looks much better. The overall look of him, and the yellow light definitely win against Kitt. I went out again, to make some scenes about Kitt, but the result wasn't better I don't know why, but my camera likes the yellow light better, than the red light. The appearance of Kitt is not so strong, as I thought at first. It is weak But the screenplay allows you to decide, who wins! :) Despite the difficulties, I really liked to make this movie and like the result. Hope, you like it, too! Driving: The car is drived by an L Motor, with a gear ratio 1:1, through a differential. Steering: It is very simple, too. I used a Servo Motor. The other two functions are more interesting. Working headlights: I used two M Motors. If I push the button on the remote control, I start to operate both ones. One of them opens the lights, the other one switches them on. It is impossible to push and release the button fast enough, so I had to use slippery mechanisms. For the opening I used a clutch gear, you can see it on the bottomview picture. But at this level of cramming, there isn't enough place for a clutch gear everywhere, so I found out a new solution. Between the two connectors, there is a small piece of rigid hose. If the switch reaches its end position, the hose can rotate calmly further in one of the connectors, and the mechanism waits my reaction time. Working scanner: Two M Motors again. One of them switches on the light and the other motor, which starts to move the light. The switching mechanism is very similar to one of the pneumatic autovalve. After it changed the position of the PF switch, it rotates further and doesnt cause damage. The construction, which transforms the rotation of the motor to the linear motion of the red light, contains three liftarms. More pictures on my MOCpage! Thanks for watching!

Fantastic building! I especially like the rose window and tree is cool too!

Very bright and colourful layout with a lot of nice details and buildings! Great work!

@THERIZE: Thank you! Maybe you are right regarding the suspension, but who know? Nowadays roads become worse and worse... @ER0L: Thank you my friend! I guess, it would be good in 7 stud wide, too. As I wrote, if you use Technic, working with odd numbers is easier. @Vorkosigan: Thanks! Nowadays I try to take that kind of picture with every MOCs!

Hi everyone! My newest creation is remote controlled! It's a bus and it's my fifth tiny RC at minifig scale! Hope you like it! My previous RCs on Youtube: , , , Of course I visited the intercity bus station with a camera and the bus again, as I did recently! The type of the bus is Ikarus, but only the body is Ikarus, the engine and chassis is Scania. That's why you see the word 'Scania' on the front. It's possible to travel by it in Hungary. At the area, where I live, the bus company has I guess three of them. So we have more chance to catch it, than to catch . If you read the technical things below, you will see, that it has some disadvatages. But I like it very much and I'm really satisfied with the body! It has some crazy building techniques in every directions. As far as I know, they are my own inventions. Maybe they are already exist, but I didn't know them. My favourite detailes are the headlights, the taillights, the upside-down windows near the gear rack, the covering method of the destination screen and the air conditioner. Technical detailes: It is more difficult to build a bus at this scale, than a truck. For example at a the truck we can use five stud wide frame, and after that we can cover it by tiles, so it won't be too wide. But for a bus we have to use panels to make the windows, they are 1 stud wide on both sides, so if we want to stay in 6 studs, the frame can be only 4 stud wide. And Technic prefers the odd numbers... It's not good if the driven wheels leave the ground, so the rear wheels are not completely fixed. Looks like, if I make something better, something becomes worse. It's the first time, that I used servo motor for steering. The steering features are better, the frame is worse. Below you can see an image without the body. You may notice, that there is an arch in the frame, like a bridge. The AAA battery box is at the back, and its weight causes this deformation. Furthermore there's no possibility to fix the body by studs after the servo motor. Therefore the mudguards touched the rear wheels. I had to raise the rear part of the body by half plate. It causes some deformation, too And finally I have to tell you in secret, that the servo motor moves the gear rack on a little bit longer distance, what the inner things allow. So the motor twists the frame. You can see it in the video at . Therefore one of the front wheels sometimes leaves the ground.And almost all of the weight is on the driven wheels, so sometimes the bus wants to go straight ahead, instead of turning. But it's very rear. And finally you can see the small piece of pneumatic hose, which holds the window in upside-down position. The base and the top of the window panel has a different thickness. It depends on its position, in which height the more space in the body is. If I use the window on a normal way, the gear rack pushes it out, during steering. All in all it looks cool and works well, so I'm happy with the result of my fifth attempt! More pictures: http://www.moc-pages.com/moc.php/425778 Thanks for visitnig!

Wow! It looks very cool! I especially like the roads!

@Captain Green Hair, ER0L, Palixa And The Bricks: Thnaks for your comments! I'm glad you like it!

@Gongoro73: Thank you very much! :)

Very nice and detailed exterior and a well thought out interior! I especially like the 45 degree corridor and the renovation looks very cool, too!

@soccerkid6: Thanks for your comment! I'm glad you like it!

The colour scheme and the many 1x2 plates look great! I especially like the interior, my favourite details are the red armchairs! :)

Wow! Great idea and a very nice result from it! I really like the interior!

Hi everyone! If you recall the memories about my older buildings (Snack Bar, Airport Control Tower, Floriculture), you may realise, that all of them had a very detailed interior, and it was more attractive, than the exterior. Now I tried to create a building with a highly detailed overall look. And it has no interior, because I had to use the space inside for building different things, which keep the door, the windows and the chimney. After some brainstorming I found out, that I make something in the style of the old Hungarian railway buildings. There are a lot of interesting challenges at this topic. Stations, sheds, water houses, warehouses, etc. Finally I decided to build the wathman's house, because it is the smallest, and this size is still okay for my budget :) The next picture shows the house with my Siemens Taurus. Not exactly the same era - totally different :D but I think they look cool together! The pictures below show a lot of interesting things around the house, after them you can see the building tricks I used in or on the house. I'm really proud of two things. The first is the white MÁV (hungarian railway company) fence. It is possible to find it almost everywhere (picture of the real one). My Lego version is not perfect, a little bit different from the real one, but I guess, I cant do it better with Lego bricks. The fence is modular, and only the gravity holds it. Basic rule of Lego is 2 studs = 5 plates. It is not true. Theoretically it is possible to make an endless fence, but the truth is that only these five moduls are enough to create an ugly difference between the basement and the fence The second is the two bushes. They are also held by the gravity. I used this and this elements to create them. Furthermore there is an outhouse and a garden shower in the courtyard. Another interesting thing is the roof. I always used platebuilt roofs with hinges, but it is possible to create only a few angles with them, whithout a gap at the top, between the two half. But now I found out this new technique with technic pieces. More pictures are on MOCpages! Thanks for visiting!

Very, very cool buildings! I especially like the pedestrian area around them! Really great solution, if someone wants to use tiles, but wants to fix minifigs on it, too!