sirslayer

Its only one axle!!! the rest are pins ad connectors with beams and anyway I've never had that issue but if I was towing a ton of bricks then I can see your point.. good luck!!

Tough order you requested, I've done all pendular suspension Corvette 4x4 and I really liked the outcome.I needed to add shocks to the rear axle to prevent the body to roll and I had to switch the steering from a geared based to a linked style that is similar to the Lego 8860 40th year anniversary model!! Some folks might say on my setup there would be to much friction. My video link shows they are incorrect!! The diagram is just a quick version of my setup and the turntable is just for reference UntitledModel_2 by victormendoza_jr, on Flickr

The Black Widow 2,0 is my 2021 AD model which features all the functions from version 1.0 plus 4 wheel steering and new compact chassis that can be used as a direct replacement of the Lego set 8081 chassis and keeping the original body style of a v4 cruiser 2 door off road vehicle with independent suspension and big balloon tires. I believe this is a legit mod for the Lego set 8081 this is my best 8081 chassis mod ever!! 8081boss_Copy by victormendoza_jr, on Flickr Bricklink link https://www.bricklink.com/v3/studio/design.page?idModel=122661

I've got a Studio 2.1 question regarding U-joints .... How do you bend from the center of the u-joint to the end instead of the end to end rotation!!?? and back to the fake motors on Studio 2.1, 53 degrees is great but how do you get the piston to connect to the rods without any collision or otherwise the piston looks to popped out ?? I was able to adjust the angle like + or - a few degrees .. I've done the whole technic model with collision on and the u-joints are holding me back!!! thank you .. Here is a link to the file!!!! free from Bricklink.. https://www.bricklink.com/v3/studio/design.page?idModel=122456

Black Widow 2.0 Exoskeleton Can you tell the difference between 2.0 vs 8081!!?? Will the real slim shady stand up!!

Buwizz with the Powered Up ports or even better Powered Up and PF ports on the same device!!... @Philo.. show them how to build one!!!!! Please :)

and a Bugatti for $60 dollars!!! It would take 30 days but paypal recommends to give a week and if there's no tracking info then you contact paypal to start the refund process.. Im just hoping its a grand opening special!!

Don't say that.. paypal please rescue me!!!

OMG!!!! I just got the Lego set 42100 For $77.38 USD !!!! I can't believe this and I just bought one... Paid with Balance$77.38 USD Shipped to United States

A quick comparison of the Lego 8081 front suspension vs Black Widow front suspension The Lego Technic 8081 original front suspension mod. This mod mimics the build and adds a wheel hub in a 13 wide frame. Not only it's supports an independent suspension setup with drive. The springs at max compression turns on the 2nd features that transform the independent suspension to limited live axle suspension with Max travel. 2.0 Exoskeleton release You can download the Black Widow 2.0 exoskeleton (new chassis) Studio file for free or just view it in 3d from Bricklink.com link below https://www.bricklink.com/v3/studio/design.page?idModel=122661 8081boss_Copy by victormendoza_jr, on Flickr

I like it also, I can do a remix to fit my needs but I believe he is using 49.5mm tires?? half a stud length distance almost a dust sweeper :)

Your first set of pictures didn't include the two extra set but anyway your ground clearance is a bit low

@Mechbuilds I see you are using axles for a guide for vertical stabilization but the axle on the wheel side will slide to the left or right like a swing unless you change this into this and IDK if those "guides" are strong enough.. keep us updated!!

Your my Lego technician!!!

Very good article and really?? 10.5 volts input limitation that is the same as the IR setup !!!! Buwizz are you reading this!!!

I like it and very fast. Is it me or does it veer to the right?? as in it doesn't keep a straight line when going forward??

@Maaboo35I found my model on the ground and I think my cat knock it over.. Very good observation !!! and yes a better solution is all ready on my Studio file. I haven't updated the physical model since I'm planning to to take apart my model to be used on the upcoming Eurobricks contest.. The advantage on using a 3d model is you never run out of parts!!!! So any more updates will be in digital format. IMG_20200127_043914703 by victormendoza_jr, on Flickr We both miss you, Vanessa!!! from Victor and Smudge

The Black Widow on 68.8mm ?? tires, Wearing the rims and tires from Lego set 8682.. I never knew this set existed till I won the set on Ebay, last week!! Interesting model and how it compare in size. Next week I will do a comparison between the Black Widow and the Lego 8081 Extreme Cruiser. lego technic 8682 vs my 8081 mod by victormendoza_jr, on Flickr

Beautiful Red truck and an awesome chassis setup, I believe it's one of your best build..

It did download but It just don't like Americans!!!! IMG_20200126_003244532 by victormendoza_jr, on Flickr

Best 911 in that scale!!! great job!!

When I go to your mediafire link, it says to repair link and a few ads pop up.. urggghhhh

Ok, after finding the filter and I did find the all brand option , I was shocked!!! So I look into the help file and ha ha ... Here are a copy of Brick link policies .. Other brands are not permitted !!! so then why an all brand option?? this is what Bricklink define it as . LEGO Brand Only: All items listed for sale must be LEGO brand products unless they fall into either of the two categories listed below – 5. (Custom Sets) or 6. (Non LEGO Items). Other brands of building toys are not permitted. Items Pending Official Release: Items may not be listed prior to their official LEGO release date, either as custom lots or under related catalog entries. Replicas and Counterfeit Items: All LEGO items must be original and genuine. Replica boxes, photocopies of instructions, or any other counterfeit listings are not permitted. Modified Parts: All parts listed in your store must be genuine LEGO parts in their original, unmodified condition. Custom printed, engraved, chromed, or painted parts are not permitted. Custom Sets: Custom sets or instructions may be listed, provided they do not infringe on any intellectual property rights, including those of the LEGO Group. Custom sets may not contain modified parts or non LEGO parts such as lighting kits or electric motors. Non LEGO Items: Certain non LEGO items that are deemed by BrickLink to be part of LEGO fan culture may be listed. These include literature about LEGO products, LEGO memorabilia, and items used to make custom sets (e.g. stickers, instructions, and boxes).

Some more photorealistic renders drawing from Studio 2.1 The render took a few hours and they real look good.. This version of the Black Widow is called the Bluebug edition blackwidow(tmc)doors_3 by victormendoza_jr, on Flickr blackwidow(tmc)doors_2 by victormendoza_jr, on Flickr

blackwidow(tmc)open_Copy by victormendoza_jr, on Flickr Lego technic by victormendoza_jr, on Flickr It took 2 hours to render the picture that shows the bottom of the truck.. Wow!!!