Jump to content

SevenStuds

Eurobricks Citizen
 View Profile  See their activity

  • Posts

    250

  • Joined

  • Last visited

 Content Type 

Everything posted by SevenStuds

  1. SevenStuds
    Shipping charges, terms and lot averages are all individually chosen by each BL store owner. Bricklink doesn't advise anyone on those. I only know of very few stores that have either lot averages or very high min buys. I usually put those stores onto my "least favorites list" so I no longer see their store as an option to buy from. When I find great stores (like the ones with fixed shipping fees or €5 min buys) I add them to my favorites list. It's all your choice at the end of the day. Good luck and happy shopping!
  2. SevenStuds
    Hilarious! But seriously, it could be worse. I could have used in the sound track! :laugh: Sure, here is a folder with all the photos of the disassembly. If you are going to build it, I would say try to redo the gear setup, especially for the turntable. If you look at the drawings created, there are some that did not complete where they started around the loop (like this one). That happens when the slower oscillating motor (with the slider) doesn't complete its cycle by the time the turntable makes one revolution. It takes some gear calculations to figure out, and if I build a V2, I will have to start with that to improve the results. Also, if it's just something for the kids, you could get them started on this one by JK Brickworks.
  3. SevenStuds
    I can relate. Not exactly a hotel, but an AirBnB. My collection was stuck in a container for 6 months this year while I relocated to a new country, so I had to do just that: set up a temporary space and start with one set (again). The day our things arrived (finally) it was like receiving the worlds biggest Bricklink haul :P If you have kids at home, I hope you locked the shed up well ! :D
  4. SevenStuds
    Thanks for the comments. The simple patterns take about 3-5min and the more dense layouts about 10min. When I was checking the gear ratios online, the slowest setup had the turntable geared down 1:1778.489, so the theoretical output speed of the turntable was 0.1rpm. Once the turntable did a full revolution, the pattern was done.
  5. SevenStuds
    Hello! This time I'd like to share my latest project: a drawing machine that is inspired by Joe Freedman's Wooden Cycloid. The LEGO version uses freestanding boxes that can be moved around the turntable. A slight change in position creates a different pattern. Further adjustment is possible by placing the drawing arm onto the different pins on either drive box or changing the position and distance of the pen. Placing one end of the arms further from the center can create a pattern up to 20cm in diameter. The variation possible with this setup makes it almost impossible to repeat exactly the same pattern. Now since I'm a huge fan of psychedelic music and digital art, I wanted to make the video resemble some of the artwork we always see at the outdoor parties. Without giving too much away, I'll let you grab a drink, turn the volume up and enjoy the video! Full write up with more images here. Thanks, Mik
  6. SevenStuds
    That helps a lot! Thanks! I have some old USB cables around, I'll see if I have any that could be used.
  7. SevenStuds
    That would work pretty well with those Airjitzu propellers. Did you mention anywhere how you connected the USB wires to the LEGO PF system? I wouldn't mind testing that out.
  8. SevenStuds
    I've tried those Advent Calendar trays, but it find it difficult to see parts at the bottom of the black compartments. Back in 2009 (I think), they were transparent and before that white, which made them better for storage. I believe that Kinder also makes advent calendars today with white 24 compartment trays, but you can't part out chocolates on Bricklink just to keep the trays
  9. SevenStuds
    Maybe slow but the looks make up for it. Nice mix of new parts and old wheels. I personally love the grip of those old tires.
  10. SevenStuds
    Well done on reaching your goal! Time for a ludicrous party?
  11. SevenStuds
    Well Jim, if your X-wing starts to look like an inverted U-wing let us know :D
  12. SevenStuds
    A lot of wisdom has been laid out in this topic, and all very valid points not just for Technic, but life's goals and projects as well. My take on it is that you can never let any project get too dusty, just do small updates each day. Even that shiny new Porsche will become "eh" after some time. Having the reference or inspiration photos in front if you each day helps. One last thing is that I think it's OK to let go sometimes and call it a "version 1", take photos (or build what you have digitally), pull it apart and continue with other things that make you happy. Perhaps a year down the line you want to come back, rebuild what you had, and that way the process stays current and inspiring. Good luck!
  13. SevenStuds
    I don't think it's useless at all, and quite often just this type of creativity leads to inspiration for a new model. Here are some that I think are worth sharing: Left to right: Model Team Wheel with Znap tire and Wagon Wheel spoke. This can also be doubled to make a wider wheel. Love those tread patterns by the way! Technic Racing Small wheel with 2 Znap tires (tire does overlap slightly at the back) 61.6mm Motorcycle wheels (one on each side) with Power Puller Tire (This I had seen on someones shelf with chromed inner wheels) Viking Wagon Wheels (one on each side) with Power Puller Tire Hope to see hundreds more on this thread
  14. SevenStuds
    Dream job anyone? Just saw that LEGO is looking for a new Senior Design Director: (Link)
  15. SevenStuds
    Looks like a set! B models should be totally different, and sometimes TLG takes the easy way, like the Xerion. I totally relate when you say "I design stuff for living, so I do not want to use computers in my free time" because it's the reason why I'm hesitant to go digital. To make instructions, I just take photos of the disassembly, and reorder them backwards. Just curious, what do you design for a living?
  16. SevenStuds
    I just have to add that I think it's so awesome to have this type of open conversation with the developers of the 3'rd party products like SBrick. When last have you been able to discuss a future set release with a LEGO set designer or part developer? Why do we have to resort to making hypothetical topics like "questions for LEGO designers" (and wait forever for "the one" to go for a rare interview) instead of just having them here on EB and having a conversation? The level of secrecy (for obvious corporate reasons) makes TLG feel like a fortress. I guess Apple and some other companies must do the same do to their large size. What users really want is to openly discuss their wishes for parts, functions, colours and have the people making the products actually take notice and respond.
  17. SevenStuds
    That model is great. Thanks! I saw they even have a 35mm version of the rotacastors. It's a pity that a LEGO version, like the omni wheels Mahjqa used for his metal grudge tank, would have too much resistance.
  18. SevenStuds
    Thanks for the tips Jim and JJ! I just saw some of Simon Burfield's videos where he uses those rotacasters. They are really quite something! Thanks!
  19. SevenStuds
    It would be fantastic to. If a serious buyer requests a particular design, it will happen. The main reason why the covers are more popular is that you can get 4 custom covers for the price of one rim. Let me know :)
  20. SevenStuds
    I'm in the process of planning an air-powered vehicle that should be able to freely slide in any direction on a smooth, hard surface. For this to work, I thought of using 3 or 4 of these Technic ball pivots to support it: One of them is used in place of a 3'rd wheel in this Mindstorms model: Does anyone have any experience with them as to how freely the bearing rolls inside the ball joint? If a light craft was supported on 3 of these, how much force would require it to roll? Thanks in advance!
  21. SevenStuds
    This video does show the BuWizz's performance (and your fitness) quite nicely. Thanks Zblj! I have to wonder whether the "ludicrous" mode would be included if the unit goes into production. Would there still be enough of a safety margin that guarantees people don't damage the unit or their other electric parts? It would be running the setup at 11.8V! How stable would that be for people who use it continuously? The guys at SBrick say that 11.8V is the absolute maximum their unit could handle before the circuit boards start to fry. Jorge Pereira (SBrick tester) says to not go over 10.8V. If the BuWizz unit (and the LEGO wires and motors) can in fact safely handle 11.8V then this could be its main advantage over the competition.
  22. SevenStuds
    Very happy about the parts list, and of course those red wheels and tires! I wonder if these new 6x6 red dishes will pull down the prices of the hollow stud 6x6 dishes, which are currently around €9 each.
  23. SevenStuds
    Looks like regular Technic medium rims with 107mm dia tires. The details for the wheels have just been posted here: http://www.eurobricks.com/forum/index.php?showtopic=120398&st=550#entry2609974
  24. SevenStuds
    Very exciting! I really like where this is going! Having the extension wires is a big plus. Thanks!
  25. SevenStuds
    Sounds like you have it well thought through. My personal preference is to not have more "tackle boxes" than I can fit on a desk when I build. I prefer having large drawers with divisions inside so that I can quickly access each part. I'm a big fan of these.
×
×
  • Create New...