Search the Community
Showing results for tags 'bionicle'.
Found 479 results
-
The Bat Free Building Instructions: https://rebrickable.com/mocs/MOC-99935/makushima/the-bat Lego Technic MOC - The Bat (Free Building Instructions) by makushima
-
How can I tell if hose parts are cut or not?
Transparency for Effect posted a topic in General LEGO Discussion
I'm not even entirely sure being cut is the case, but I'm comparing two different Hose, Ribbed 7mm D. parts of the same axle length (y'know, these pieces: https://www.bricklink.com/catalogList.asp?catType=P&catString=522) for a Sand Tarakava replica and I think one piece has one more of the rings than the other and thus maybe a little longer. Is this standard for the pieces to be slightly different like that, or has there been piece alteration here? As someone whose purist in the sense that I just want a LEGO set to have the parts as they normally are, can you tell if a hose part has been cut down (and thus not the actual piece) if that's even what's happening here? For all I know the messy-looking ends of the parts may just be the condition or so. I sorta just get OCD over the parts being correct, a similar case if Hose, Rigid 3mm D. parts (https://www.bricklink.com/catalogList.asp?catType=P&catString=528) are cut or distinguishing between the proto minifigure blank heads and regular minifigure heads whose face printing has been rubbed off over time (as well as stuff like if parts are actually bootleg instead of authentic LEGO, but that's another can of worms). EDIT: Looking at some sealed parts from a bag of the Sidorak set, yeah the inconsistent rings seems to be present there too, and a little weird "fraying" at an end where part of the circle is raised above the rest of it. Guessing LEGO's production itself cuts the pieces down from a long length into the right size and the softer plastic is why stuff like that happens? -
Hello denizens of Eurobricks! This MOC was started about February 2019 but I got stuck on the head and lost my files, I started again last October and finished it around the last day of the year. I figured although this creation is from the Bionicle universe (well it kind of is the universe) it is a sci-fi creation and a system build so it goes here I'm quite proud of it as it's my first build using Bricklink Studio and I definitely am going to do most of my building (or at least planning and part budgeting) in Studio from now on. Edit: added the scale comparison photo. Here's the link to the ideas page that has views of the other sides: https://ideas.lego.com/projects/0c310848-b5eb-4d71-85b6-258bc99b0b73 One area I definitely need to fix is the spine-which has numerous collisions due to how difficult flex hoses are to work with in Studio. After the last update it numbers 1984 parts, happy to hear any advice from those experienced with mechs etc or who have ideas for additions
-
Hey there, I'm here to present a MOC I've finally took the time to take decent pictures of, Fali'Ven. Click on the picture to access the gallery ! Fali'ven is an adventurer in the Neverscape era of Universcape, a french Fan Universe created by Loserkiller. While at a certain point of his life he explored dungeons with a fellow explorer from the same race, he's now working alone. This character doesn't have any specific powers, and only rely on his agility and his fighting skills to survive the many traps and ennemies that awaits anyone who dare enter the different sacred places hidden and scattered in Universcape. The basis of this design is, as most of you may have noticed, the blue Vahki, Bordakh. I wanted it to have a G1 feel, and had to have elements from the original Vahki, but designed as a hero/adventurer, so with tweaked proportions and armor. The blades were an afterthought, as I had them lying on my desk, since I didn't use them on my rework of Chi Panthar, and they just looked perfect with this MOC. The actual backstory of this guy is taken back from 2004, when the Vahki actually came out. My friend found them pretty early and knowing that I was waiting eagerly for Bordakh to come out, bought it and offered it to me as a gift. Fast forward several months, we were playing with several Bionicle figures, in an universe similar to the one from The Legend of Zelda, where my Bordakh, wearing the King Mathias cape, was a hero who needed to defeat the evil gan... Ultimate Dume. I remember having fun with him for several hours and this is still to this day one of the fondest memories of us that I have. While he left us several years ago, the idea of remaking this character never left me and I finally had the inspiration I needed last august, for the result you can see here. As always, comments and criticism is welcome !
-
Never show your back to the enemy. Built for GOURD PARTY, a competition with some friends. I temporarily joined in to give them a little trouble during their round. Quick 2-day build. Got the general idea of what I wanted to do, although ran out of time to embellish more. I probably will revisit this eventually and clean up a lot of it. Twitter Post (has some early WIP pics in the comments). Instagram Post
-
Could Web Of Shadows Have Worked As A Direct Sequel To Mask Of Light?
The Outsider posted a topic in LEGO Action Figures
So, here's an idea that's been circling in my head for the past months: Apparently, one of the many reasons fans didn't like the 2005 storyline (I personally loved the aesthetic and themes, even if they were not well executed, and my greatest gripe is how the third movie is completely incompatible with the surrounding media of that year) is because, as a midquel, we already knew what the end result was going to be. And one of the main reasons LEGO insisted on it was to reuse the assets and environments from Metru Nui. So, I wondered: why didn't they make 2005 a direct sequel to Mask of Light? The Matoran were going back to Metru Nui anyway, and it had been abandoned for thousands of years; it'd be perfectly plausible for the Visorak Horde to settle in the meantime and become the next threat to the returning villagers and Toa. Seeing the city overrun and devastated right after hearing about its former greatness and teasing its return might even be a bigger emotional punch (to the character and to the audience) than it all happening in a flashback of a flashback. The Toa Hordika could even be the mutated forms of the Toa Nuva instead to go back to the fan-favorite team, or completely new heroic characters (therefore avoiding the "controversy" of their wildly new looks) who were former victims of the Visorak and followed them around trying to thwart them, becoming allies of the past characters. At that point, the only major unresolved plotlines were how the Toa Metru saved the remaining Matoran Pods in the coliseum (which, if the Horde hadn't moved in yet, didn't need much of an explanation; they just went back and got them) and how Makuta got out of the Toa Seal (which could be explained as the work of the Horde or Makuta breaking free of his own power with time, I don't remember if they established by then how durable the Seal was). What do you guys think? Do you think it could've worked? Do you have any ideas of your own? -
Is your Island home overgrown and a mess? Spare no expense and help yourself to Madame Bahrag's services! Their maids will C L E A N any and all surfaces to the point where you can't tell people live there! Call now for a free inspection today! Made for Biocup 2021 and yes. It's a sexy Bohrok maid.
-
Hello everyone, my nickname is Zhokker, I am a fan of lego Bionicle and system since 2007, as soon as I got my first toy. Very interested on 3D modeling of different LEGO parts and LEGO Bionicle. Known among a few people for creating a better version of MoUP and I also have a store on Shapeways. Joined Russian community in 2015, and in foreign community since end of 2019. Took a chance and registered here to keep up with news and updates. Ready to help with your questions about 3D modeling and so on, would love to meet different designers! Here below some of my work from the past year 2020. https://imgur.com/gallery/f7ihzPd https://imgur.com/gallery/NbJ34Fm https://imgur.com/gallery/JYjUcN8 https://imgur.com/gallery/DnfHbg7 https://imgur.com/gallery/a8Hw4uV I also made some bionicle parts for bionicle stud.io parts pack and I have my own project which I working on right now, Knight's Kingdom parts pack for renders in Stud.io (LDD, but better)
-
I wanted to redesign Onua Mistika life based on a concept drawing made by the owner of the brickshelf account MuffinToa and his Project Nuva. MuffinToa thanks for the inspiration if you see this. DISCLAIMER: I have no intention to claim all the glory for this design idea. and i'm not trying to commit plagiarism of any kind. I used Lego program called Studio 2.0. The options including masks are severely limited but i did my best. Onua Nuva/Mistika Inspiration Image: https://brickshelf.com/cgi-bin/gallery.cgi?i=3221337 UPDATE: NEW RENDER IMAGES ADDED Front Back
-
This moc was made for jakes_brick_hoard's 1k Contest and depicts a reimagining of the rahi Husi found commonly in Po Wahi. If you guys enjoy what I make, visit my flickr and instagram pages! Flickr Page: awesomenessborn Instagram: awesomenessborn
-
Mercenary Free Building Instructions: https://rebrickable.com/mocs/MOC-65944/makushima/mercenary Lego Bionicle MOC - Mercenary (Free Building Instructions) by makushima Lego Bionicle MOC - Mercenary (Free Building Instructions) by makushima
-
Had this moc made since 2017. Thought it was time to give him an upgrade and post him. Check out my flickr and Instagram pages for more. Flickr: https://www.flickr.com/photos/102848133@N04/with/50035364061/ Insta: https://www.instagram.com/awesomenessborn/ ~Borne
-
Hi everyone! This is the first part of a series of revamps I've recently done of the Phantoka and Mistika sets in the CCBS style of BIONICLE G2. In this thread I'll post my revamps of the six Toa. You can click on the images to go to my flickr profile, where you'll find some more. I have to mention that these are heavily based on [this](https://www.flickr.com/photos/comilarapa/45052680522/in/dateposted/) revamp of Tahu Mistika by Lewis Hammond. Without further ado, here they are! TAHU POHATU ONUA LEWA KOPAKA GALI I hope you enjoy my take on these characters. Next week I'll post my revamps of the six Makuta. Have a nice day! :)
-
How to easly ease the conflict around LEGO's 90 anniversary between Bionicle and System?
Taohe Netrus posted a topic in General LEGO Discussion
As we all know, vote caused a conflict between Bionicle fans and System fans. The main reason is fact that all of Top 4 series (exept Bionicle) have already some great sets. LEGO Pirates fans have 21322 Pirates of Barracuda Bay set, LEGO Space fans have 70816 Benny's Spaceship and 21109 Exo-Suit. Fans of Castle series have 21325 Medieval Blacksmith and I'm sure, we'll see some kind of Castle-themed series soon, even without voting. What about LEGO Bionicle fans? After cutting short its story in 2010, and waiting 5 years for proper continuation, LEGO created a reboot that failed in many ways. But gave us great parts to creating MOCs. Unfortunatelly, Bionicle G2 ended in 2017 and since that, it's really hard to get any pieces for normal price. Remnants of LEGO Star Wars buildable figures are expensive cause of license and Bricklink is the only place where we can get CCBS parts now. Bionicle fans are affraid that LEGO will soon destroy moulds from G2, making impossible for us to get bricks like 24189, 24190, 24191 or 20474 that were great for building MOCs. The conflict will increase until LEGO start caring about Bionicle fans. If LEGO doesn't want to give us new sets, it should at least release some jars with CCBS parts in three size variants: Matoran, Toa and Titan, which will contain skeleton parts, shells (not only in standard colors, but sand-green, purple etc. too), weapons, technic joints, technic panels and recolored masks that will allow us to reforge our anger into creativity. Bionicle has great potential to create action figures, giant fantasy creatures and vehicles with lot of technic functions. But it's hard to build MOCs without parts. If there's a LEGO theme like LEGO Classic, we can have LEGO CCBS too. I know, part of system fans doesn't care, but what about you, Bionicle fans? Do you think, there's a chance for CCBS jars or we'll continue to buying sets like Corvette ZR1 just to have parts to create another Rahi? :p -
Howdy all! I’d like to show this expansive modular MOC that I’ve worked on and tinkered with for the past couple of months. It’s called BIONICLE Legacy: Storytelling with LEGO Bricks because I aimed to build something that conveyed what the theme represented to many fans, and the impact it had upon release 20 years ago. Even if you haven’t been overly fond of or familiar with the BIONICLE theme, I hope you’ll still take a few moments to check out this project! https://ideas.lego.com/projects/b5456207-ed0d-4f44-a02b-b0dae424158e I’m very hopeful and proud of this project, but it has been struggling to gain the needed attention to progress, and it clearly won’t get very far without your help and support. I greatly appreciate all support, comments, and shares. Fingers crossed! :) Uploading images proved to be a bit tricky, but you can also find higher-res images at Flickr:
-
[MOC] Nevermore ... (The Raven) Lego Bionicle MOC - Nevermore... (The Raven) by makushima
-
[MOC] Pullback Technic Bug
RuTechBrothers posted a topic in LEGO Technic, Mindstorms, Model Team and Scale Modeling
Hello, dear friends. I've been a fan of the Technic series for a long time. For all the time I can remember only a couple of sets that go beyond construction equipment and cars, one of which 4958 - Monster Dino, from which my acquaintance with the company's products began in ancient times. With my idea, I want to new wave a series of Technic and show that these are not just machines. The proposed model is driven by two pull-back motors. While driving, the bug slowly accelerates and runs a distance of about two meters. Starts with a traditional rollback. After start, the beetle does not just go forward, but moves its legs and moves its head. Vote and join if you also think it's time to add something new to the series of Technic. Support this MOC in Lego Ideas if you like and share my philosophy. https://ideas.lego.com/s/p:f99ce2c31533451f8158f48d9499f944 -
Made for the MP Monthly contest for December. Wasn't allowed to post in November being a judge, so I combined the themes (medieval and bug). I hope you all like it!
-
First Helryx Canister Design update! Round 1 Sketches Overview Hi everyone! I’ve created this topic to post progress of the Helryx canisters that I will be working on. This is my first topic ever created here so I really hope I did this correctly and am not violating any rules. I started this project on the TTV message boards, but have recently discovered this great community here & wanted to start interacting with y'all, seeing your work and sharing my own. My overall thoughts on this project & motivations on it can be found on the links below (which will bring you to said TTV message boards): Helryx Kickoff Helryx Canister Project Movitation Basically, the long+short of it is that I will be designing canisters/containers for each of the TTV canonization contest characters. I am really looking for lots of feedback to make this as top-quality as possible, so please let me know your thoughts! I’ve initially started sketching for the Helryx canister: Round 1 Sketch 1 Round 1 Sketch 2 I’m wanting to go with an ‘old-skool’ canister look, something from the likes of 2001-03. Obviously far from flushed out yet, been mostly working on the lid. I personally have my own thoughts about these designs but will keep them to myself for the moment - I want to hear yours! I really want community involvement/opinions to help make this the best it can possibly be. So please, comment, critique, criticize, and ask away! I’m looking to solicit as much feedback as possible while I keep sketching. Hoping to post again after another round of sketching (maybe 5ish days?) HM (edit: I know how annoying it can be to have to use imgur links to view someone's work/moc/etc. I tried to upload images directly to the post, but they appear to be too large - over the .1MB max size. If anyone knows how to help me out with this, that would be much appreciated Further edit: Was able to size down some of the images so that they are all (hopefully) displayed in the post without having to click on any links. Please let me know if this is working well, as I have lots more images to post haha)
-
Hi all! Lately I am more and more intrigued by trying to make my own silicone molds for LEGO parts (mostly Bionicle) and make resin casts. I have had a look online and there's some good tips and tutorials. This is an "old but gold" tutorial about how to make molds for lego hairpieces and helmets, I remember it from many years ago, but now sadly the images have gone missing. Has anyone tried, and has experience to share? In particular brands of silicone and resin to use. Another important thing will be trying to match as much as possible original LEGO colors. Does anyone have some experience to share on that regard? It would be very helpful! Some people got very nice results but I doubt they'd want to share their secrets :P I have never attempted silicone casting, so I only know what I could read online :) Thanks for your help!
-
“We shared our victories, and our punishment… so we will share the power of this mask as well.” ~Kalmah This was a collab made with several other builder’s. Check out their creations here: Takadox Carapar Nocturn Pridak If you guys enjoy what I make, visit my flickr and instagram pages! Flickr Page: awesomenessborn Instagram: awesomenessborn
-
I present to you, the first gundam of Allelujah Haptism in the series : Mobile Suit Gundam 00. Type: Lego Gundam Name: Gundam Kyrios Code: GN-003 Size: 1/60 Pilot: Allelujah Haptism Team: Celestial Being Series: Mobile Suit Gundam 00 ( 機動戦士ガンダム00 Kidō Senshi Gandamu Daburu Ō? ) Reference: _Non-Grade 1/100 _High Grade 1/144 _Anime This is my Facebook page: https://www.facebook.com/demon1408/ Flickr album: https://www.flickr.com/photos/148042982@N03/albums/72157710585691868 DevianArt album: https://www.deviantart.com/demon14082000/gallery/70316722/lego-gundam-kyrios-gn-003 You can also check this video for full gimmick and articulation :) These are more image LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr With weapon LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr Since this is a transformable Gundam , I also implement the Flight mode for this Kyrios LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr LEGO Gundam Kyrios GN-003 by Demon1408, trên Flickr With a team: Gundam of Celestial Being by Demon1408, trên Flickr Thumbnail by Demon1408, trên Flickr
-
Here is my round one entry that allowed me to advance to the second round in the 2020 Biocup. Enjoy! Check out my flickr and Instagram pages for more! Flickr: https://www.flickr.com/photos/102848133@N04/with/50035364061/ Insta: https://www.instagram.com/awesomenessborn/ ~Borne
-
The Irish legend goes, if you hear your name called out in the night, the Dullahan has come to collect your soul. Made for Bio-Cup 2020: Round 2 Theme: Western Europe Enjoy! Check out my flickr and Instagram pages for more! Flickr: https://www.flickr.com/photos/102848133@N04/with/50035364061/ Insta: https://www.instagram.com/awesomenessborn/ ~Borne
-
7700 Stealth Hunter 7701 Grand Titan 7702 Thunder Fury 7703 Fire Vulture 7708 Uplink 7711 Sentry (Click the images to access the gallery with more shots) Ever since Hero Factory: Brain Attack launched, I've tried to imagine what Exo-Force would've looked like using CCBS. Here are some revamps of the main six mechas from the original line. I hope you like them! :)
