Jump to content

sirslayer

Eurobricks Knights
 View Profile  See their activity

  • Posts

    893

  • Joined

  • Last visited

 Content Type 

Everything posted by sirslayer

  1. sirslayer
    I understand the process of video editing and its a good video. its timing on certain shots are hard to follow and using different cameras can be a chore to edit together. I can tell by looking at the background and you can see the different in FPS . I've done a 12 volt conversion and your performance is not question and I believe your model does fly.
  2. sirslayer
    impressive!!!
  3. sirslayer
    small and simple is good, you need a longer video to show durability
  4. sirslayer
    when you feel it is done then its finish
  5. sirslayer
    thank you @MattL600 and I just did a body clean up , looks alot better with bigger doors and front end , some much to do !!!
  6. sirslayer
    Hard to tell if its playing normal speed... good build though!!
  7. sirslayer
    I like your theme!! cobra snake???
  8. sirslayer
    Ill be honest and I believe you have great craftsmanship since the durability is present on video , going downhill just shows its lacking some speed .. good job !!
  9. sirslayer
    you make it look simple which is good!! , i will try it and see how it performance and durability on an offroad course and in door maneuverability course . Thank you for presenting it
  10. sirslayer
    @johnny1360 if i use my color method it should be in the half way to hard. According from the web its in the middle https://www.google.com/search?q=lego+shock+absorber+color+scale&newwindow=1&rlz=1C1CHBD_enUS768US768&tbm=isch&source=iu&ictx=1&fir=_1hyDED1X5uTOM%3A%2C_bEmO29zx09ytM%2C_&usg=__4lHBbe2tSJkBCkG4LrxF-56ClF8%3D&sa=X&ved=0ahUKEwjDkIKRsMraAhVH9mMKHSJ1D3gQ9QEINzAF#imgrc=_1hyDED1X5uTOM:
  11. sirslayer
    thank you @Johnny1360 I did change the front suspension by allowing the steering bar to slide up and down on two long vertical rods that was connected to the steering rack and made the suspension perpendicular to allow the ease of the rods to slide up and down which work very good (see picture) and no more pushing like you said, I took off perpendicular limiter and the only issue is now when i take a deep turn left or right its popping up the steering rack but it will center out and the rack is connected again , i didnt see that when the perpendicular limits was on.... .. On ver. 3.2 chassis im changing back to posi-traction. im not to impress with using unlock diff !!! this is with the limiter on the blue 2l lift beam prevents the rack to slide off and @Johnny1360 you have eagles eyes!!!! yes your correct about my 90 degree u joint rotation!!!!
  12. sirslayer
    Suspension its like McPherson struts with 2 links for stability, for a small scale model, finding that right setup to do suspension can be a challenge. Its small enough to use the balloon tire as its cushion so therefor a simple A-arm style with out independent is nice to have.. testing of this is still WIP and a few days Ill determined if i need to change.
  13. sirslayer
    very good performance !! Very custom Lego set?
  14. sirslayer
    cool video and great model!!! good luck!!
  15. sirslayer
    That is so cool!! soon you can use Lego to make balloon animals!! You did design this ?? If so, Excellent job
  16. sirslayer
    Mini Chassis 3.0 "Chief Fire Ranger 4x4" (tm) Well I went ahead and put Ver. 2.1 chassis on the shelf and get back to it later. Its has a major suspension upgrade and Im still learning on how to use the shock absorber correctly and I just got myself a Lego set 42075 which ver. 3.0 chassis is based from .. It follows the same scale as the Lego set 42068 which ver. 1 and 2 chassis is derived which I favor due to its smaller scale and just enough performance under 9 volts to be satisfied. 3,0 mini chassis Based off the Chevrolet 4x4 1500 Suburban 4 door Body with interior and all Lego PF devices are hidden and full cosmetic California based Ranger's themed 1 XL Pf motor and 1 M Pf motor with receiver and battery inside cargo area of model. Compatible to all types of controllers. 67.8 mm Lego balloon tires All time 4 wheel drive with limited slip differential Generic A frame front end suspension with 2 links and generic "baja" buggy style rear suspension This is my first release and updates will be plenty:)
  17. sirslayer
    wow, I like how it looks, I like it when its more technic then looks and you got both!! great job!!
  18. sirslayer
    I like the contrast with your colors and being compact you did a good job on the use of your panels!! Great job overall
  19. sirslayer
    good job, you gave me an idea for a future project.
  20. sirslayer
    when I was a child, all my technic models had a bigger square pistons and if they had a cam it would be similar to your pistons. I thought the mini where the smaller yellow pistons. its odd that the pistons are with no cylinder. transparent blocks do exist!! update, I got it thanks!!!
  21. sirslayer
    ok I thought they represent cams since they are located above the piston and then they are pistons without a cylinder .. odd !!
  22. sirslayer
    i thought a w block engine has 6 rows of cams 2 rows per block head for a total of 6 rows.. that looks like a v block engine and is there a piston inside of your model ??
  23. sirslayer
    @arijitdas and I can tell its not from shipping that damage it. the box was long and skinny. my mail box is big enough if you slide it in like a letter!!!
  24. sirslayer
    Wouldn't this piss you off???? It was shoved in my mail box!!!! Urrggghhh!!!
  25. sirslayer
    I've did a dual gear design where the output from motor have 2 x 24t gears on the output axles and 2 x 12t gears on input to differentials so I could do forward and reverse instants travel with minimal clicking or grinding. the axles tend to bend inwards or bend outwards from heavy loads or torque. the dual gear design makes sure gears dont skip a beat. the small 12t gear single bevel to diff is usually the cause
×
×
  • Create New...