msk6003

Considering recently introduced parts, 3x19 frame and 11x19 technic base plate, we need 19L liftarm too.

Even I forget to build backplate and GBC ball mixer, this is still the largest MOC I've ever made. Instruction will soon available on my rebrickable page soon.

Kyosho Mini-Z use 130 motor and has brushless version. But Lego L/Buggy/Train/C+ large angular motor's internal motor is little bigger than 130. M/PUP M/EV3 M/C+ medium angular use 130 size but in my test, those motor use little higher voltage unlike normal 130 motor which used in Tamiya Mini4wd model.(Usally work on 3v) But it doesn't matter on this topic, so still can swappable internal motor. PS. 8183/8184 also use 130 size for drive motor.

This will be more useful than that. LEGO PART 54802 Flywheel Inertia Motor 9 x 4 x 3 2/3 | Rebrickable - Build with LEGO

Video finish. Instruction will release on rebrickable soon.

Seems like this design will not work with normal 56908/15038 wheels. Looks to big for 56908 and both wheel has 0.5L protrude on both side which will blocked by axle hole on wheel mount part.

Cada has it but they don't sell it separate.

I remember it being about the almost same strength, I'll check it out after work today. At least it's definitely stronger than the soft version usually used on motorcycles.

Well... I'm a little shocked that I didn't even make it to top 50%.

Part no 11957 offroad bike tire(last release is 2019) for that bike wheel is same size 100.6 with this set. Both are same offroad tire, I think we can see offroad bike with that tire.

The idea that the Aston Martin F1 Safety Car will be the next 1:10 model sounds very reasonable. The car's original color is closer to dark turquoise, but considering that it was recently shown in Speed Champions in normal green, it's likely that it will be in normal green in Technic too. Additionally, if the Aston Martin Safety Car is true, there is a possibility that the F1 model will also be Aston Martin, and this large-scale collaboration with Aston Martin also indicates that the 2026 1:8 supercar could be Aston Martin too.

About topic - If you are not lego pureist, currently have this solution.

Even I already did DB5 on TC20, Icons Ecto-1 and DB5 will good. Or how about 10302 optimus prime and 10338 bumblebee? And if you can do it, I highly interested on 21323 grand piano.

Seems like TLG did similer thing but something different. It has very lot of C+ L motor on backside of car but it isn't work in video. I'm guessing they took the chassis of a real car and put a Lego cover on it, so the car in the video runs at the same high speed as the real P1. Anyway, TLG did something similar to what they did with the Bugatti and Sian: using a lot of parts in non-existent colours. In the video, you can see a lot of 7L flip-flop beams (probably yellow), as well as a stop axle of unknown length and possibly a 3L friction pin, all in yellow.

I don't remember which model it was, but I had the same issue while disassembling the same part that went into the 5L suspension arm. I think that hub part is the problem.

voted

I think I has almost lego spring and those BMW/Yamaha/1:8 9L spring is strongest one I have. Even more stronger(feel like x2 harder) than that 11L Lego RC spring.

Thanks :) It wasn't intentional, but I have a feeling this model has the most parts out of all the entry's lol

Glad to see you again!

Thanks!

For people anyone who interested to custom chain/track for tank or other thing This is my custom sprocket design for custom chain which I found few years ago. I didn't post it because I planned to use it for my K1A2 MOC but it delayed to much so I change my mind. Even on this setup chain can work perfectly but if you have some kind of 5L circule thing like 68327 can use for more stable working.

Fiat abarth 131 rally car is now available on cada site also with 5L ball link and electronic splitter. I bought 1 fiat, splitter and 10 5L link. Now I need ball to pin connector.

Concrete pump truck GBC Function Drive using spike medium / RI angular motor Steering using C+ L motor GBC using PF L motor Openable door Openable both side component door Extending outrigger and arm

I finally finish cab. Due to arm can rotate only 85~90 degree, model can work best as corner module. And I change GBC driver motor to PF M to L. But C+ M/L is work too. Video Final function Drive using spike medium / RI angular motor Steering using C+ L motor GBC using PF L motor Openable door Openable both side component door Extending outrigger and arm

The shape is tricky to make in reality, so I imported the existing 13L thing and reduced the length to 9L. Other than that, nothing has changed, so if you have a parts designer, you can actually make it yourself. Of course, there is an air vent that is not in the actual part, and it looks a little dented, but it is usable without any problems. Just like the rendering picture in the link. And hub looks like this. The original's curved parts are all gone and there is no color separation, but it is no problem to use. At least in my trike.