Jump to content

Bricksmith

Eurobricks Vassals
 View Profile  See their activity

  • Posts

    72

  • Joined

  • Last visited

 Content Type 

Everything posted by Bricksmith

  1. Bricksmith
    Glad you like it! I've written the script for the Scotsman showcase and I'll film it soon as Uni gives me an afternoon to breathe. I have considered sharing/selling instructions since I do have some designs for them. However, they're on a program (Not LDD) where I can't get my head around the instruction book software, and neither can my computer it seems. I might give it some time, then release a file if I can figure it out :)
  2. Bricksmith
    Incredible, It's such a striking engine and you captured the look of it perfectly. Wish I could see it in person!
  3. Bricksmith
    Thanks! The Big Ben Bricks wheels worked a treat for the model. Thanks! I have 2 BR passenger cars so far, aiming to have a full set of 4. Matching LNER - style cars will likely come later too.
  4. Bricksmith
    I like it! Would look great on builds that aim to look more like the real thing.
  5. Bricksmith
    Sorry, 'Super Chief'. My mistake.
  6. Bricksmith
    Would absolutely leap on the chance to purchase an Emerald Night as I was too young to raise my own funds the first time around! A Super Chief or Hogwarts Express would also be a good shout :)
  7. Bricksmith
    Hi all, After finishing my first steam train MOC 6 months ago- the iconic Gresley streamliner 'Mallard', I was eager to get started on another engine. After digitally designing a large roster of engines to the same scale, I decided to stick with the classic LNER designs and build my own take on the iconic Flying Scotsman. The build has evolved slightly since the original design, but not by much. Below is the original render which included the bar along the and green tender wheels. The build began with laying out the wheelbase. This also matches the wheelbase of the Mallard MOC. Then, the tender- complete with all the power functions elements! The motor's proportions meant the tender has 3 wheels instead of the accurate 4. Note the clipped wheel cover on the front axle. It wasn't an easy decision but the details look so much neater because of it. The boiler was next, and after a swift bricklink order the pieces came together very nicely. Lastly, the wheels! I can't say I've seen any MOC's that have used Big Ben Brick's Green wheels before, but here they are, and they look fantastic. There is still plenty to work on, such as decals and working piston rods (that don't obscure the width of the build too much). Fr now though, I'm happy to call this finished. For now. EDIT: I recently made a Youtube video taking a closer look at the MOC, where it can also be seen in action. I'd love to hear your thoughts on the build, please feel free to leave a comment! I'll leave with a few more images of the build. - Isaac Info on the Mallard MOC can be found on this thread:
  8. Bricksmith
    Fantastic model! Very well done capturing the shape of the wheel arches. I reckon with some of the new tile pieces that Lego has brought out recently you could get a cleaner parabolic curve on the side instead of using those round 2x2's. Maybe something you could look into! Also- love that Flying Scotsman! Never seen that build before but the proportions and colours are spot on!
  9. Bricksmith
    I'd love to see a modular Train Station, though it seems unlikely after they rejected the recent ideas project. All the same, i think one would make an excellent addition to any modular street.
  10. Bricksmith
    Incredible! I really like your miniaturized Ecto-1 :)
  11. Bricksmith
    Thanks! You're right it is the 'classiest', but hey, it's fun to dare when you build.
  12. Bricksmith
    Very nicely done! Lots of interesting detail in there.
  13. Bricksmith
    Amazing! Love the colors you've packed into it. My favorite would have to be the magic shop :)
  14. Bricksmith
    This is absolutely fantastic! The gold detailing is just perfect. I'd really love to see it get through Lego Ideas, I think this has enough unique character to set it apart from the likes of the Emerald Night that i think Lego might consider it!
  15. Bricksmith
    Thanks! Easier said than done i'm afraid, As I said earlier the computer can't process all the pieces together at once and crashes. I'll get building as soon as I've got the parts!
  16. Bricksmith
    Hi all! I've recently been working on a bunch of train-related projects and figured i'd need a place to display them once a substantial amount have been built. I wanted to do a city center station that, while still small enough to be affordable, gave an impression of being bigger than it actually was. And while it isn't based on the similar-sounding King's Cross, it does deliberately have a very London design. The result is half-terminus, half continuous with the platforms below street level. I tried to render it all as one but my computer doesn't have the processing power for all those bricks! I hope you don't mind seeing the build in its 3 main sections. SECTION 1: The building Ground Floor: First Floor: Front view: SECTION 2: The canopy This will be much longer in the final model. The version rendered here is designed to cover the remainder of the 32 x 32 baseplate. SECTION 3: Base level: Platform & Concourse I hope this has been an interesting looking build to you, I'll update this feed when I finally get around to making it for real!! I'd love to hear any comments and suggestions too! -Isaac
  17. Bricksmith
    Thanks! The downside with 6-wide is sometimes a loss of detail, so I tried to compensate by getting the shapes as accurate as possible. (Side note- I managed to get the mallard to run smoothly by making a few small tweaks to the connecting rod :) )
  18. Bricksmith
    They are, yes. And I actually glued the connecting rod components in place while fixed to a long technic brick to make sure the spacing was correct. There is a chance it might be to do with the nature of the connecting rods and their friction with the wheels. I've tried it without and it seems fine so i doubt it's the valences.
  19. Bricksmith
    Thanks! I think i'll have to have a go at making the Flying Sausage at some point. Though Scotsman is next on my list :) I just tried it and it seems that the engine is too light and there isn't enough friction- the driving wheels don't move at all! They just skid along the track. Thanks for the suggestion though :)
  20. Bricksmith
    Incredible! I love those swan boat designs.
  21. Bricksmith
    Hi all, I recently went on a bit of a designing spree during my holidays and thought I'd share the results. I've been developing these models at a slightly smaller scale than usual (Hence 6-wide), but it's been a fun challenge and one I would like to develop into more actual models if I have the time. I thought i'd share them all at once as I didn't want to clog the forum xD MALLARD (LNER A4 Class) The first design I did of this scale and the only model I have physically made. You'll notice that the boiler is different from the render as those arch blue pieces are horrendously expensive. If you are interested I go into more detail about it in this MOC video on my Youtube channel. FLYING SCOTSMAN (LNER A3 Class) Classic design to follow on from. The wheelbase is copied from my Mallard build, which forms the base for all my pacific class designs. TORNADO (BR Peppercorn A1 Class) Developed this by tweaking the Flying Scotsman build. I know of better ways to do the smoke deflectors, but unfortunately the parts weren't available on LDraw. GWR HALL CLASS I developed this for a friend's Hogwarts Express build, but also as a bit of fun. With a couple of tweaks this could always pass for a King or a Castle. LMS ROYAL SCOT CLASS I think the front of this engine could be different if the parts were available, and I wasn't able to do the wheel arches, but I'm happy with the tender and the shaping of the cab. SR KING ARTHUR CLASS I thought i'd try and to an engine from each of the major British steam companies. The obvious one for Southern was a Merchant Navy or West Country, but I've already done a lot of Pacific engines. BR STANDARD 4MT TANK The one major drawback is that it isn't motorised. I've been considering making a motorised carriage that would not only move un-motorised engines, but help the bigger motorised ones around the corners better. That, of course, comes with its own set of drawbacks. THE FLYING SAUSAGE (LNER 10000 - 'HUSH HUSH') I wasn't lying in the title, this is such a wonderfully absurd engine that I had to try it. my only major niggle is the colour scheme, but I suppose experimental engines are hardly worth sprucing up. I hope you've found these MOCs interesting, I'd love to hear any tips, comments or suggestions for future builds! I'm planning on building the Flying Scotsman before long, then maybe a set of coaches. -Isaac
  22. Bricksmith
    Oh that is perfect. Consider it supported. I'm also of the belief that trains are unlikely to make it through Lego Ideas, but it shouldn't stop us from trying. Something recognizable like Rocket might be a good shout. The only downside is the lack of motorization, but I have absolutely no idea how you'd go about doing it.
  23. Bricksmith
    I've uploaded a youtube video showcasing the project. Should have more interesting, better lit shots of the train, including the interior. Enjoy!
  24. Bricksmith
    The roof is removable, yes- i'll upload some photos soon of the interior as the various railings that people usually hang on to actually hold the model together too! Thanks! That idea did cross my mind, so i'll definitley look into it. Due to the way that the model has been made (A lot of SNOT) it'll certainly be a challenge, but i think that's unavoidable really.
  25. Bricksmith
    This tube stock model is based on the 1996 stock that currently runs on the Jubilee and Northern lines. My goal was to keep them 6- wide, and worked to fit the proportions that came from that. As a result, the model uses small tram wheels, which introduces an obvious problem if i wish to motorize it. If anyone has any suggestions on how to do so i'm happy to hear them! The model roof isn't high enough to fit minifigures inside unfortunately, but removing their legs and clipping them to the inside can produce a nice effect. I'll possibly post some more photos in the near future, as well as a showcase video on my youtube channel.
×
×
  • Create New...