Search the Community
Showing results for tags 'mon'.
Found 4 results
The goal here was to build a MC80 flagship for my Rebel fleet that was: a) As closely to scale as possible with 6211 Star Destroyer. b) Larger (longer) than any of my other Rebel capital ships i.e. Phoenix Home or Tantive IV. The result is below, a build I will continue to preen and cycle out better parts/colors for. I think there should be a smattering of more small orange pieces. I am more concerned with how it looks on the shelf now than with any screen accurate considerations. But it does scale very nicely with the Star Destroyer so far (pic to come). The engines are a little... large. Truth is, those blue minifig stands for Lego Dimensions are way more useful to me in a build like this. I will likely shrink the main rear engines somehow but I also need to figure out how to add the other dual engine pods on either side behind each large shuttlebay. There isn't any inside space, but I do display it with my A Wings, B Wings and next to the bridge part of 7754 Home One Mon Calamari Star Cruiser so it looks good with lots of Rebels hanging out in front of it. Would like to hear any suggestions builders may have on improving it. I was only using my spare parts for this so I could certainly invest in some better components for it someday. Thanks for looking.
Edited Nov´21 Hello folks, Rogue One, a absolute stunning movie (in my opinion), gave us this great designed, whale-shaped Flagship. It is like a combination between classic McQuarrie concepts as well as modern military submarines. The instructions are now avaiable at Brickvault: https://www.brickvault.toys/products/mc-75-star-cruiser-confidence LEGO UCS MC75 Star Cruiser CONFIDENCE by Kommandant Keller, auf Flickr About this MOC: Dimensions - 89 cm x 20 cm x 46 cm The model contains 5728 pieces 700-pages Instructions The ship features a compact, but playable interior including maintenance hangar, command areas and detachable quarters A Nanoscale Tantive IV can also be fitted right into the hangar bay in front of the ship UCS MC75 Star Cruiser CONFIDENCE by Kommandant Keller, auf Flickr Shame on me I didn´t post an update earlier but some other priorities kept occupied me the last months on further progress. Not to mentioned I took quite long to finish the model digitally. I went through different versions, each iteration with better techniques and quite better shaping... it was always some kind of finding the right balance considering techniques and esthetics. Like for the digital model and instructions: The rear-shape changed another time because the used building methods just were to challenging for implementation. But irl quite easy to archive. LEGO UCS MC75 Star Cruiser CONFIDENCE by Kommandant Keller, auf Flickr In Lego-Universe it always felt like something is missing for the Rebel Alliance Fleets out there. Dozen of ISD, various shapes, types and sizes – but less big Rebel ships. I am very proud of the outcome, especially since there are not many UCS-like Mon Calamari ships out there. And let´s be honest - the color scheme was the most fun part of designing. Doing some happy little drops here, markings there. The ship differs to the well-known PROFUNDITY Star Cruiser but I couldn´t resist to paint it acccording to my wishes and put a name on it. CONFIDENCE! UCS MC75 Star Cruiser CONFIDENCE by Kommandant Keller, auf Flickr Maybe this model can inspire some of you for Mon Calamari Star Cruisers Kind regards Kommander/Keller Original post February 2019
JorstadDesigns posted a topic in LEGO Star WarsHey everyone! Just posting an update on my MC75 Profundity. My original version used some technic liftarm supports at the front of the ship that obscured the lower command fin and wasn't as attractive. After trying a bunch of options, I've settled on this design as a balance of structural support and appearance. It's probably slightly less stable than the first version due to having one fewer support point over a smaller base surface area, but the ship isn't really designed for swooshing anyway, so I'm pretty satisfied! I additionally made some parts changes to reduce rare part usage; the new version also cut maybe 150 bricks overall. I hope you like the changes! Although there are a few different variants of the ship that showed up in Rise of Skywalker, this is the base design as seen on-screen in Rogue One, commanded by Admiral Raddus during the Battle of Scarif. Although Rogue One and some online images were used occasionally for scale/size reference, I mostly used the MC75 model from the board game Star Wars Armada for the design (a fantastic board game for anyone interested in strategy games). Part count: 3,294 LEGO bricks Dimensions: 32 in. L x 7 in. W x 15 in. H The original version took about six months of off-and-on design work to finish in LDD. I spent another four months testing the new stand for the update. Stud.Io was resisting while the PDF instructions manual was generating, but it got there eventually. The Profundity is designed to-scale with LEGO's new ISD (#75252) as well as most other JD MOCs, including the MC80a Home One, MC80b Liberty, and MC30c. The height of the ship was a bit of a challenge, but in the end the tall stand turned out to be an advantage for mounting other Rebel ships. Both the Tantive IV and the Ghost are designs by LEGO (the Tantive from the new ISD, and the Ghost from the Star Wars advent calendar) modded only for attaching to the model. The Tantive can be placed docked inside the hangar bay, escaping the Profundity, or on it's own independent stand. The MC75 star cruiser is a Mon Calamari city ship repurposed for combat with battleship-grade heavy armor and a large weapons collar encircling the main body of the ship. The most well-known MC75 was the Profundity, commanded by Admiral Raddus during the pivotal Battle of Scarif. Boasting twenty point-defense laser cannons, twelve broadside turbolasers, four heavy ion cannons, twelve proton torpedo launchers, and six tractor beam projectors, the MC75 was more versatile than the MC80 and easily adapted to varying engagement styles. The most notable feature of the MC75 is an armored outrigger fin extending the bridge command pod below the ship, a design choice intended to evoke the appearance of predatory fish feared among the Mon Calamari. A smaller fin above the ship housed the transmission array and primary sensor clusters. The large docking bay within the ship's nose was capable of docking ships up to the size of small corvettes (notably the Tantive IV). Although the MC75 lacked prominently displayed engine housings, twelve Kuat Drive Yards Gemon-15 sublight ion drives hidden beneath the rear armor plating allowed the MC75 to match the cruising speed of starfighter escorts. I tried to be as accurate as possible to the on-screen appearance of the MC75, but decided to sacrifice the grills in the sides of the forward weapons collar. Unfortunately the scale also prohibited adding the 8 smaller sublight engines in the rear of the ship. Clearly the model isn't a 'swoosher,' but overall it's remarkably sturdy! Honestly the test build went much smoother than expected, given the complex angles and the continued presence of gravity (haha). It took about twelve hours to assemble using Stud.Io and making corrections/fixing errors; should be significantly less using the manual. Thanks for looking - hope you like the design!
Upon arrival, I went to an old buddy of mine, who happens to be in the business of knowing everything that's going on around him. If anyone knew where Boba was, it would be him. Hey, Wetz! Grahaym? Hey! What brings you to Mon Calamari? I'm looking for someone. A bounty hunter called Boba Fett. Yeah, I remember him being here. Refueling, I think. Is he still here? Sorry, but no. He got caught up in a fight and the other guy didn't do so well. He took off pretty quickly keeping his destination a secret, seeing how the guy's friends weren't too happy about what happened. I see. Well, thanks anyway. Looks like I'll be heading back to the Redemption. And a quick additional shot of the rockwork hidden by the platform: