Search the Community
Showing results for tags 'missouri'.
Found 7 results
-
This is a MOC of the last Missouri Kansas Texas Railroad (also called the 'Katy') steam locomotive left in existence. The real 4-4-0 numbered 311 was built in 1890 by Baldwin Locomotive Works, and was heavily rebuilt in 1923. Among the upgrades at that time were: new steam chest with piston valves, new steel cab, and a new tender with an oil tank. (Basically only the 1890s frame survived!) In 1945, it was dressed up to look like an old Western engine as it pulled a four-car demonstration train called the 'Katy Flyer' in celebration of them "Winning the West" in 1870 by being the first railroad into what was then called Indian Territory, which is now the state of Oklahoma. The train toured the Katy system, and was later delivered under her own power in late 1952 to the National Museum of Transportation in St. Louis. It was later partially disassembled in the 1980s in a still-born effort to return the engine to operation on Museum property (after which a bunch of parts went missing), though they are trying to restore the loco cosmetically at this time. The MOC version is inspired by 2010 set 7597 (Western Train Chase), but was so heavily modified that basically nothing remains of the original set except the wheel arches over the driving wheels. The rear of the locomotive. I couldn't figure out how to do the shield logo on the tender, so I just let it off. The restoration of the real engine looks mostly complete. Thoughts? EDIT 5/23/26: Pictures updated to reflect the updated paint scheme of the real world engine and MOC. -
This building was born from a failed attempt to recreate the Museum of Transportation's administrative offices / ex-caretakers house (in St. Louis, Missouri) out of Lego to go with my other Museum items I've recreated. I did my best, but it wasn't a good enough rendition for me so I modified it to suit my own tastes, with this typical 1930s / '40s house MOC being the end result. The house folds open to a 90 degree angle and has a detailed interior. The blue 1930s car is inspired by a mock-up car mounted at the new Museum main gate, and is modified from this Rebrickable MOC by @Leewan. NOTE: The mini-figure seen in these pictures is not meant to be anybody real. Any resemblance to any persons - living or dead - is purely coincidental! The front of the house without the car and owner. You can compare my MOC to the original building, shown above. (Photo from Google Maps, NOT MINE) The ex-caretakers house is the Museum of Transportation administrative offices in St. Louis, Missouri, and was probably built soon after the museum grounds were purchased from the Missouri Pacific railroad in 1944. NOTE: This building is not open to the public. The rear of the house. I only had the one picture of the front of the actual office from Google maps, so the back was relying on memory only, and - to be honest - I couldn't remember anything. So I made my own version instead. I completely invented the interior room arrangement and furniture for this MOC, as the original building I was inspired by is offices now, and no pictures (that I could find) exist of the inside when it was a house. Furniture for this MOC was inspired by the following sets: - UP House (set 43217) - Lilo and Stitch beach house (set 43268) - Sanctum Sanctorum Showdown (set 76108) - Pet Shop (set 10218) - Emmet's Dream House (set 70831) In addition, the grandfather clock was designed by my brother. For my changes to the Rebrickable MOC I turned the color from white to blue with white top and dark gray running board. I then replaced the Speed Champions wheels, saucer hubcaps, and teacup headlights with other parts that suit my tastes more. I also substituted the older one-piece Racers grille with cheaper parts as well. The car without the driver, who (probably?) can fit in the seat. This is because there aren't many hairpieces that can be used with this car due to the low roof. The back of the car. The 3x3 round dish is supposed to be a spare tire cover. The removable roof design was also changed to be stronger. There is a bit of space behind the headrest for some luggage. Thoughts?
-
This 4-6-0 steam locomotive's real-world counterpart was built in 1889 by the Baldwin Locomotive Works for the St. Louis, Iron Mountain and Southern Railway and was numbered 635. After working the Sedalia to Warsaw, Missouri route for many years, it was donated in November 1966 by Missouri Pacific to the Museum of Transportation in St. Louis, Missouri, where it still resides today. My LEGO model of the real engine is as faithful to the real deal as I could feasibly get while still retaining my style of building. As a side note: the boiler of the engine is inspired by the loco in set 71044 - Disney Train and station. The rear view of the locomotive. Sadly, I couldn't get the name of the railroad into it's proper spot above the road number on the tender. The inside of the engine's cab is pretty sparsely detailed. The real world loco as of March 2018. (Sorry I couldn't get a better picture, as the streetcars are parked in the way most of the time!) Thoughts?
-
Here is my final design of the St. Louis bridge, commonly known as the Eads bridge because of it's designer, James B. Eads. It uses Indiana Jones roller-coaster ramps for the arches, which looks pretty cool. The bridge is nine tracks total in length and 19 bricks high from base to track. (This means about fourteen bricks of clearance between arch top and floor, so some small ships could pass through!) First, a little background info from Wikipedia (which is also where this picture came from): "The Eads Bridge is a combined road and railway bridge over the Mississippi River at St. Louis, connecting St. Louis and East St. Louis, Illinois. The bridge is named for its designer and builder, James B. Eads. When completed in 1874, the Eads Bridge was the longest arch bridge in the world, with an overall length of 6,442 feet (1,964 m). The ribbed steel arch spans were considered daring, as was the use of steel as a primary structural material: it was the first such use of true steel in a major bridge project. The Eads Bridge, which became an iconic image of the city of St. Louis, from the time of its erection until 1965 when the Gateway Arch was constructed, is still in use. The bridge crosses the St. Louis riverfront between Laclede's Landing, to the north, and the grounds of the Gateway Arch, to the south. Today the road deck has been restored, allowing vehicular and pedestrian traffic to cross the river. The St. Louis MetroLink light rail line has used the rail deck since 1993." This is a rough representation, as it is missing a lot, (I.E. no car deck, missing tunnel under downtown, and lack of the East St Louis ramp approach.) A close-up view of the arches of one of the three identical spans. The bridge as separated out for transit. Here we see the modular connections for transporting dissembling the bridge for taking to shows and such, along with the older deck (the dark bluish gray line) for when the bridge was single track. The modular component of the bridge's design also makes it a LOT easier to carry as the whole bridge with the three sections weighs about 10 pounds total. 4/12/19 BIG UPDATE: Real life pictures / text updated to reflect the newly remodeled bridge. (it now is double track!) Comments, questions and complaints are always welcome!
-
This station was built in 1912 in Glencoe, Missouri for use by Brick Railway Systems. It stands just a stones throw from the Meramec River on the old Pacific Railway of Missouri right-of-way, which first ran through the area in the mid-1850's. The station is a stone structure with a fireplace plus indoor and outdoor waiting areas. The upper floor is for the telegraph operator. As of 1997, the telegraph has been replaced with a computer for the dispatcher to locate any train in his sector at any time using Global Positioning Satellites. (also known as GPS) Here is the track side of the station, featuring a five track long platform. Here is the street side. Their will be printed 1 x 1 tiles spell out the town name of GLENCOE on both of the signs when built in real life. Here is the modular side of things: One left and one right platform, the station proper, the control room and it's roof are all connected by either pins or a very few studs. In reality, the town of Glencoe really exists, but this station does not. There really was a Pacific Railway of Missouri, which bored the first two railway tunnels west of the Mississippi River in the mid 1850's at Barrets, Missouri. Barrets is where the Museum of Transport is located and Glenoce has the Wabash Frisco & Pacific Railway (a 12 inch gauge steam railway) which runs for two mile round trip on the old right of way. The original model seen here is based upon the Brick City Depot "Winter Village Train Station" instructions. I think I have modified it enough to upload the LDD file, which is available here: http://www.mocpages....1421346826m.lxf I have calculated the cost of this model at around a $110 USD (give or take), and am currently raising funds to create it in real life. Comments, questions and complaints are always welcome!
-
Description from the Museum of Transportation's website on the real vessel I based the towboat off of: The H.T. Pott was the first Missouri River towboat with a welded steel hull instead of a riveted hull. The vessel operated out of Kansas City, Missouri on the Missouri River. It is named for Herman T. Pott (1895-1982), a distinguished river transportation executive and entrepreneur. The groups of barges that are moved on the nation’s rivers are called “tows." The boats that propel the barges are “towboats” even though they push the barges from the back instead of pulling them. The H.T. Pott is 58 feet long and 15 feet wide, and it has a “draft” the amount of the hull below the water line of 6 feet. You can walk the decks of the H.T. Pott. You can see a picture of the real towboat on the Museum's website here. Notes on the LEGO model: The name of the vessel, HT Pott, will go on the studs just below the roofline on the bridge. Besides the lettering, two white brackets and four black curved plates are missing from the digital model. Also, a printed-cloth American flag will fly at the rear of the craft off the second level. The rear of the vessel, with flagpole and ladder to upper deck visible. I plan on putting this 1930's towboat and my 1880's Proud Mary steamboat on the depressed-height table holding my Eads bridge, to give a stereotypical view of life on the Missouri / Mississippi Rivers, both distant past, and more recently. (as the towboat worked the Missouri river traffic from '33 up until the middle 1980's.) Now, you may be asking yourself "What good is a towboat without something for to to push up / down the river?" This was the existential question I asked myself today, and the answer I came up with shortly thereafter was "not very good". So, I set about building something quite commonplace if you live near any of the major rivers of the mid-western USA: a pair of un-powered barges! (I think they usually use them for grain and silica, among other bulk goods, but here they are empty, mostly because like the towboat model I made, they have open bottoms.) These type I see a lot here in Saint Louis, and are of the modern variety... although I'm unsure how long they've been using this design, to be honest. It seems to be two barges next to each other, but in actuality, they are one big barge. I did this because less parts are used this way. I will eventually have two of these ancillary models hooked onto my tugboat / each other with 5-long LEGO chains. (these are not in the picture) The HT Pott is few bricks less in height (and more than a few studs shorter in length) than my 2019 sternwheeler steamboat MOC, the Proud Mary (link to it's topic). Side note: The two being near each other like this isn't exactly an anachronism, as there were a scant few steamboats still plying the rivers when the HT Pott was built in 1933. (Granted, most steamboats had seen better days and were on the way out or retrofitted for cruising duties by then, but it's still accurate!) Thoughts? EDIT 6/2/22: added real world pictures.
-
This model was inspired by the Siemens SD-460 type light rail vehicles used by Metro Link in Saint Louis, Missouri. They are usually two sets used on every train, so just imagine a exact duplicate of the train above connected to the train you see. Basically it's four cars with only two walkways and four cabs, though only the outer two are ever used on the line. Also, the two cars with the inter-car connection are supposed to share a Jacobs bogie underneath the walkway. I didn't use one because it would cause problems storing the train in my boxes IF I decide to get it. the walkway. I didn't use one because it would cause problems storing the train in my boxes IF I decide to get it. The side of the model. The first set of pantographs on the far ends of the cars are used as ice cutters in cold weather (though they can be used in an emergency for power collection) , while the second, inner pair are actually used as the electric pickup points. This is not my map, I got it off Google. It is used by Metro Link on it's trains to show the stations used by the Light-Rail system. The Metro Bus routes are not shown, as their are too many routes to show on this type of map, though the metro buses usually use the routes of the old streetcars. The train is supposed to feature the "M" logo on it's front and rear ends, but their is no printing on the logo, which is a blue square with a red circle inside, which has a capital "M" in white located inside the red circle. (I used a black 1x1 plate because it stood out more.) Anyone wanting to read more about Metro Link and their plans for any future extensions and such should visit their wiki page here: https://en.wikipedia...ink_(St._Louis) EDIT: forgot to add the LDD file: http://www.moc-pages.com/user_images/80135/1453843587m.lxf