Search the Community
Showing results for tags 'clone wars'.
-
During the Clone Wars, Chameleon drois are sent to destroy the Jedi temple on Ilum and the lightsabers crystals housed within. Barriss Offee has just completed the construction of her lightsaber, supervised by Luminara Unduli.
-
-
-
"The Unstable Terrain Artillery Transport (UT-AT), also known as the "Trident," was a military transport and assault vehicle that served the Grand Army of the Rpublic during the Clone Wars when the use of walkers was unsuitable." Hi Guys, i´d like to show You my Moc Version of the UT-AT. A "blink and you miss it" vehicle of Star Wars Episode 3. I always liked the look of it and finally tried to translate it into Lego. My biggest difficulty was to angle and line up the Panels to be mostly gap-free. It is a bit on the fragile side, but if handled with a bit of care it is very much playable and posable. UT-AT Moc by Henrik S, auf Flickr UT-AT Moc by Henrik S, auf Flickr UT-AT Moc by Henrik S, auf Flickr UT-AT Moc by Henrik S, auf Flickr Size Comparison to Set Nr. 75337: UT-AT Moc by Henrik S, auf Flickr Reference: https://jedipedia.fandom.com/wiki/Unsicheres-Terrain-Artillerietransporter?file=Unstable_Terrain_Artillery_Transport.jpg Hope you enjoy, please leave comments and feedback if you have any. Thanks for stopping by!
-
Here we are! My very first UCS-style model is finally out, and it's a big one: the mighty Acclamator-class assault ship from Episode II: Attack of the Clones. Made of 5,152 pieces, at 72cm (28,4′′) in length, weighing 3,2kg, it's by far my biggest project to date. This 100% SNOT build was painstakingly modeled to accurate reference material, from exact profile dimensions to surface detail on top and underneath. The underside was also full of geomertic challenges due to its numerous angles and shapes. I wanted to include essential functionality like detachable landing gear for landed display, and openable hangar doors with boarding ramps that slide down to reach the ground. The ship also features a removable stand, as well as a hidden handle to make switching display modes easier. In addition to the "standard" version with Republic markings, I also made a "class-II", all-gray version, which comes with its own instructions and parts list. The Acclamator is technically one of my oldest projects: the initial version of the design was made right after the Torment in 2021, but I eventually shelved it as I wasn't truly satisfied with it. Since then I had so many requests for this ship that the idea of making a new version progressively grew on me, until I took the plunge in late January 2024. Starting the new design from scratch, I decided to scale it exactly to Martin Latta's fantastic UCCS (Ultimate Collector Series) Venator, which happens to be in ~1/1000 scale. So I hope my Acclamator will, along with Latta's Venator, form the basis of a bigger 1/1000 scale BrickVault Republic fleet in the future! ► Instructions for the Acclamator are available at BrickVault! More pictures on my Flickr page.
-
This is a small display model of the Republic Frigate, also commonly known as the Republic Consular-class Cruiser. This was seen at the beginning of The Phantom Menace (the red version) and many times during the clone wars. And there was a another dark red variant at Scipio as seen in season 6 of the Clone Wars show. I would consider this to be a midi-scale model. It comes with a simple stand that is easy to take on/off. The model itself is pretty sturdy and the design is very straightforward. This isn't really a complicated build at all. I was just aiming to make a nice little display piece. republic frigate (small) by Rendili Bricks, on Flickr republic frigate (small) 2 by Rendili Bricks, on Flickr This is the dark red Scipio variant republic frigate (small) by Rendili Bricks, on Flickr republic frigate (small) scipio_2 by Rendili Bricks, on Flickr And this is the version for The Phantom Menace. I made a dark red version and a regular red version. Personally I think the dark red looks better, but the official LEGO version from 2007 (I think) did use a lot of the regular red. republic frigate (small) phantom menace (dark red) by Rendili Bricks, on Flickr republic frigate (small) by Rendili Bricks, on Flickr I did also make instructions/parts list for this and if anyone was interested, here are the links: Clone Wars light gray/dark red (Scipio) versions: https://rebrickable.com/mocs/MOC-88820/RendiliBricks/republic-frigate/#details The Phantom Menace dark red/regular red verions: https://rebrickable.com/mocs/MOC-88833/RendiliBricks/republic-consular-class-cruiser-the-phantom-menace/#details What do you all think? I feel like the republic frigate is a pretty underrated ship.
-
This is my UCS-like version of the Z-95 Headhunter from the Clone Wars. It is 937 pieces + 125 pieces for the stand. The Z-95 is a pretty sleek starfighter and I wanted to give it that clean look that it has in the Clone Wars show. I think I did a decent job at that - there are not many studs showing and the starfighter overall looks pretty sleek. I did also add in landing gear. There are 3 - one in the front and two towards the back. They can retract when you no longer need them. There is also a little slot in the bottom of the starfighter for the stand to go. There isn't actually a connection; you just place the starfighter right on top of the stand. Lego Z-95 Headhunter moc (Clone Wars) by Rendili Bricks, on Flickr z95 with stand_2 by Rendili Bricks, on Flickr UntitledModel by Rendili Bricks, on Flickr I did also make instructions/parts list if anyone was curious: https://rebrickable.com/mocs/MOC-88840/RendiliBricks/z-95-headhunter/#details
-
"Commander Cody, prepare the gunships for ground assault!" Let's give the Midi-Scale treatment to another timeless ship: the LAAT Gunship or Republic Gunship from The Clone Wars. Being a fan of the sleek and flush Clone Wars era design, I thought this variant deserved more attention, especially in Midi-Scale. This Midi LAAT/i consists of 1,015 pieces, measures only 22cm (without guns), and is accurately Microfig-scaled. It features a fully SNOT look, openable front doors, and a removable stand that can be tilted to taste. Design-wise, this ship was full of challenges, with lots of subtle angles and curved surfaces everywhere. Shaping the front section wasn't an easy task at this scale, as well as adding that crucial touch of lime green without any stickers. All of this resulted in a pretty intricate structure, especially for the front section. The angled rear section of the body features other details such as missile belts, exhaust slats and tail cannon. The underside of the ship is also fully SNOT-built. Initially, all four doors could be opened, but I chose to remove the less useful rear door mechanism for a smoother, easier building process. ► Instructions for the LAAT are available at BrickVault! More pictures on my Flickr page.
-
things changed: -lowered cockpit down roughly 1 brick, changed build around cockpit region to slope into wings, taper into body, round out the rear to more accurately reflect the shape of the model in canon -filled in gaps with 1 tile width across whole body; requires some gaps in wing construction -replaced guns for accuracy; subject to further change to reduce conspicuousness -cut up stickers to apply across model -cut cockpit -nexo tile at front to hammer in the point :) working on instructions if anyone's interested. if ur curious on scale it works like this
-
Hello everyone, I always had a Softspot for the many cool looking and different battledroids and war machinery of the confederacy. Hope you enjoy the pictures! CIS - Machinery of War by Henrik S, auf Flickr CIS - Machinery of War by Henrik S, auf Flickr AAT: CIS - AAT by Henrik S, auf Flickr CIS - AAT by Henrik S, auf Flickr Crab Droid CIS - Crab Droid by Henrik S, auf Flickr
-
Hello there, I'm lucky enough to have a secondary flat at the seaside with a small stock of bricks. As I spent most of my summer holidays there this year, I used my time to build small MOCs, simple stuff, with no particular ambition. The exercice is often about how to use a particular part (NPU), how to make something with colors I use less, and still build mainly Star Wars creations with only what I have at hands (Creator, Friends, City bricks). Here are the various resulting MOCs: My Own Creations - Summer 2023 by Veynom, on Flickr I started with a small vignet, kind of a hangar where I used some clones from the 212th. 212th in action by Veynom, on Flickr If the base is 2-brick high, it is because the dark red ground part is mostly made from slopes (originally from a house roof). 212th in action by Veynom, on Flickr My daughter asked me then to build a kind of weapon shop for smugglers. I built this small bounty hunter outpost, ready to welcome scums and other vilains. I used almost all tan parts I had. Random outpost by Veynom, on Flickr Being close to the beach allowed me to make some cool pictures... Who just said "Tatooine"? Random outpost by Veynom, on Flickr Random outpost by Veynom, on Flickr Lack of tan parts forced me to be creative in many places. Random outpost by Veynom, on Flickr After the outpost, I built more speeders. Starting with this KH-26 Kaddyr, a kind of mini Opel Blitz, Star Wars way. KH-26 Kaddyr by Veynom, on Flickr It looks really rusty and cobbled together from whatever junk parts. Even its driver is a fishbag minifig. KH-26 Kaddyr by Veynom, on Flickr KH-26 Kaddyr by Veynom, on Flickr KH-26 Kaddyr by Veynom, on Flickr Then there was the KH-27 Pekz, to test color matching between lime and some custom clones purchased by my son. Lime does not work. KH-27 Pekz by Veynom, on Flickr But patrolling on the sea shore is a real pleasure. KH-27 Pekz by Veynom, on Flickr I must confess I would love driving a speeder on the sea side like that ... KH-27 Pekz by Veynom, on Flickr Free instructions for the Pekz are available on Rebrickable: https://rebrickable.com/mocs/MOC-156286/Veynom/kh-27-pekz-speederbike/#details Another speeder variant came next with the KH-28 Rhak-Skuri KH-28 Rhak-Skuri by Veynom, on Flickr I used blue and white for the colors and the engine exhaust is made from a Friend trophy cup! KH-28 Rhak-Skuri by Veynom, on Flickr KH-28 Rhak-Skuri by Veynom, on Flickr Then, with my son, we started a small contest. The goal was to create a small vignette to display his new custom clones. He started with this nice gate for a clone trooper from the 442nd Siege Battalion: Clone Wars - 442nd Siege Battalion by Veynom, on Flickr I really liked his gate. I retaliated with a stairs from Coruscant streets and Commander Fox: Clone Commander CC-1010 "Fox" by Veynom, on Flickr But finally I settled the score for all by merging both creations into a single one. His gate, my stairs. And the 442nd was back. Clone Wars - 442nd Siege Battalion by Veynom, on Flickr I found some discounted 501st battle packs. Figs are nice (ok compared to the custom ones, they are average) but the proposed canon is ... under average. I decided to use 2 of these sets to make 1 better canon. Mobile artillery platform by Veynom, on Flickr And more pictures at the sea side ... Mobile artillery platform by Veynom, on Flickr This is the new Atlantic Wall: Mobile artillery platform by Veynom, on Flickr Mobile artillery platform by Veynom, on Flickr Mobile artillery platform by Veynom, on Flickr I also made free instructions for that one on Rebrickable: https://rebrickable.com/mocs/MOC-155900/Veynom/mobile-artillery-platform-from-2x-set-75345/#details Most of these MOCs are already back to the bulk but the purpose is to build, not to keep. And when I build, it means I'm feeling good so I can conclude holidays were nice. Hope you enjoyed these, feel free to mention your preferred creations in the comments.
-
My first ever true Minifig-scale ship is finally here, and what better model to start with than the sleek BTL-B Y-Wing from The Clone Wars series. Being 23 meters long in universe, this accurately Minifig-scaled MOC is quite a unit: 57 cm long, 1,6 kg, 2,954 pieces. It can accommodate two clone pilots - one in the cockpit, the other in the turret. The model is available in three versions: classic (yellow), Rex's (blue), and red. With a spaceship of this kind, the main challenge is to achieve a level of smoothness and fluidity that gets as close to the original as possible. Using the Battlefront II model as a reference, my goal here was to closely match all key features of the ship: the subtle downwards angle on each side of the body, the curvy and tapered front section, the continuous yellow stripes that run across the entire fuselage, the intricate middle-section... and for such a smooth ship, going full SNOT (from top to bottom!) goes without saying. The T-shaped body of Y-Wings usually allow for simplistic structures, but in this case, figuring out the internals was one of the truly head-scratching parts of the build, since I had to properly incorporate angled fuselage assemblies and make a proper interior for Minifigs. Even so, the model is very swhooshable and can be grabbed from the underside, from the rear or even from both wings. Each color variant is accompanied by its specific set of instructions and parts list, giving you the freedom to build the one you prefer. The ship has two display modes, "in-flight" with its fully removable stand, and "landed" with retractable and easy-to-connect landing gear. The swooshing can begin. ► Instructions for the BTL-B Y-Wing are available at BrickVault! More pictures on my Flickr page.
-
Started working on this a while back trying to find a style I like. I'm going for a hand-drawn style that I don't actually have to draw :) Does this look too much like what it is (image processed renders)? Feedback most welcome!
-
Hello all Just the one model this time. The Ahsoka collection has taken a bit of time due to the recent Bricklink issues............ The latest issue of the LEGO Star Wars Magazine supposedly has a mini model of Yoda’s Jedi Starfighter: Yes, really, that is supposed to be Yoda’s Jedi Starfighter. Even if you use your imagination (like you are supposed to do with LEGO) and give the designer the benefit of the doubt, er no! . Basically it’s a re-coloured TIE Striker. As a MINI builder I know the limitations of these small models but really! This is just lazy and no-one would know what it was if it didn’t have it printed on the bag. The cockpit section is way too tiny compared to the wings for starters and there should be wings/s-foils top and bottom. I have had this one on my to do list for a long while but I have not got round to it but this just made me want to do a proper job on this one when my son brought this home and told me what it was! Rant over, now to the model! 😊 The cockpit is 3 studs wide not 2, and I have used the 3x3 cone as the back of the cockpit. This is all held together with a bar through a 1x1 brick with studs on 2 sides. The wings are angled forward using those rounded 1x2 plates so you can turn the wedges. I also really like how the 2x2 wedges at the back of the wings sit snuggly against the cone so there is no gap. The foils may be slightly too big but are much better than having none and overall the model’s proportions are almost spot on to the source material. Colour wise I have used green not dark green as the cone piece is not available in dark. There are probably too many pieces for a magazine gift model but this shows what can be done. Let me know what you think. Jon Full Bricksafe gallery can be found here with loads of other models: https://bricksafe.com/pages/obijon
-
"This is where the fun begins!" My latest ship from the Prequel Trilogy has arrived, and it surely was a lot of fun to make: here's Obi Wan's Eta-2 Actis Interceptor from Episode III - Revenge of the Sith and The Clone Wars. This small unit consists of 281 pieces (stand included), and has one major feature: true Minifig scale! There's a handful of beautiful MOCs of this ship out there already, but most of them are based on the huge cockpit piece from the playsets, so they're drastically oversized. So here I am with a, dare I say, more accurately scaled version. It does come with a drawback, you guessed it: you can't put a fig inside. A bit ironic I know, but I chose to go for a brick-built cockpit in order to get as close to the original design as I could, prioritizing accuracy over playability, as usual. The wings were pretty challenging given the ridiculously small scale, and my goal was to have them as thin as possible without compromising the SNOT look. I'm quite happy with the result and I think this makes a nice little display piece. It's also very swooshable despite the intricate wing design. I'm usually not a fan of stickers, but I thought this one deserved some sweet markings. I used the sticker sheet from the playset - it is included in the parts list. The color scheme can be changed to red with only a few part swaps (see last page in the instructions). ► Instructions for the Eta-2 Actis Interceptor are available at Rebrickable. More pictures on my Flickr page.
-
"Wrecker, easy with my ship. "Your ship?" My Midi-Scale collection expands again with this nanofig-scaled Havoc Marauder from the Bad Batch series. Despite the small size, I once again went for a full SNOT look and paid close attention to proportions of the original shuttle. The build comes with a discrete, transparent stand to be displayed in flight mode. ► Instructions for the Havoc Marauder are available at Rebrickable or via email at flyinspace.mocs@gmail.com More pictures on my Flickr page.
-
Hey everyone, This is it! After the Torment, the Negotiator proudly joins my Midi-Scale capital ship collection, engineered with the same philosophy in mind: maximizing accuracy, features and proportions of the original model in a moderate size. Made of 3,145 pieces, 68cm (27 inches) long, weighing 1,6kg, the Negotiator is a medium-sized, modular Venator-class Star Destroyer holding on a single, unique Lego stand. This piece of work is the result of weeks of designing, engineering and intense testing. I wanted the Negotiator to be dense, massive-looking, intricate and packed with detail, while being compact and manageable. Building at such a scale, I had to take into account every possible constraint (balance, weight distribution, structure sturdiness) while never compromising any aesthetics (SNOT look, thickness, greeble). The Negotiator features every intricate part of the studio model: turrets, hangar and docking bays, engines, bridge, greeble... with utter attention to detail and proportions of the original ship, as seen in the Clone Wars movie. Hope you like it! ► Instructions for the Negotiator are available at Brickvault. More pictures on my Flickr page.
-
This AT-RT is probably my fifth try to build it in minifig scale, or at least roughly the right size. I guess is's still a little to big but I think it captures the desing of an AT-RT quiet good. Hope you like it. Let me know what you think about my version.
-
This is the ARC-170 Starfighter - it's a massive starfighter, both the moc itself and in-universe. I first made the regular version as seen in Revenge of the Sith, and then later I color swapped it to the Muunilinst 10 colors (I did dark blue and regular blue for that). I also color-swapped the regular version to a bunch of different variants just to see what they would look like. The dark blue and yellow looked the best to me. arc170 starfighter by Rendili Bricks, on Flickr arc170 starfighter_2 by Rendili Bricks, on Flickr image taking_2 by Rendili Bricks, on Flickr Muunilinst 10 (dark blue) muunilist arc170 starfighter by Rendili Bricks, on Flickr Muunilinst 10 (blue) UntitledModel by Rendili Bricks, on Flickr These are the 11 other color swaps I did on the regular ARC-170: https://bricksafe.com/pages/starwarsfan66/arc-170-starfighter-color-variants I didn't want to upload a bunch of unnecessary pictures here. But anyway, the regular ARC-170 ended up being 2102 pieces (including the stand) and the Muunlinst version was 2113 pieces (including the stand). In terms of stability, it is excellent in my opinion. The body of the ship itself is very securely packed with technic, bricks, and plates. And the main wings and 4 smaller wings are all brick-built (with technic liftarms). Those 4 smaller wings can easily "close up" for when the ARC-170 isn't in battle. The larger 2 wings are attached quite securely to the body of the model, but I included 2 small support stands at the ends of each wing just because the wingspan is so large. Though I am pretty confident that the supports will not be needed - of course, the wings will droop a little bit without them just because of their sheer weight. For my C-9979 Landing Craft, I included stands to go underneath each of the 4 wings, but after someone built it in real-life, they told me they didn't even need the stands. By default, I made the instructions to sit on the stand, but I did make an option for landing gear as well. The stand is very simple and tucks into a 4x6 hole on the underside of the model. There are 2 modules of landing gears (one for the front and one for the middle). The front module easily attaches to the front of the ARC-170 and the middle one goes into that 4x6 hole. So in order to display the ARC-170 with landing gear, the stand will need to be taken off. Also, I know that the large wings of ARC-170 are supposed to be light gray underneath the spot where the smaller wings go, but for the regular version, I liked the look better when it was all white. But it is just a simple color swap from white technic liftarms to light-bluish gray technic liftarms to get that accuracy. I used the light-bluish gray on the Muunilinst version though. I'll include a link for the instructions / parts list if anyone wanted to take a look. It will also have some more images of the starfighter as well. Regular ARC-170: https://rebrickable.com/mocs/MOC-88927/RendiliBricks/arc-170-starfighter/#details Muunilinst 10 ARC-170: https://rebrickable.com/mocs/MOC-88929/RendiliBricks/muunilinst-10-arc-170-starfighter/#details Let me know what you all think!
-
Hey guys, with the return of the clone wars I've decided to build this moc based on one of my favorite episodes of the series S2epi5. I built one moc of the AT-TE to take the especial place on the moc. Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr Lego Star Wars MOC: Second battle of Geonosis by Lego SWBR, on Flickr www.youtube.com/watch?v=e_ggAvmKo9s
-
So after a recent visit to a Lego store, I made a spontaneous purchase and I got a small cup of PAB pieces which I thought would be useful for part of a planned large Endor scene. I poured them all out to have a look and had a moment of creativity I've not felt for a long time. I only used the pieces I'd picked plus two minifigs to make a small scene. Not sure how to describe it, but it's a grass world with large "black fungi" plants. The droid is guarding some sort of fuel pipe, with the clone scouting ahead remaining camouflaged. I hope you enjoy and I'm open to feedback. Pieces obtained: Little set built:
-
Apr.14 2020 finalized Dear friends, here I would like to post my finalized LEGO Star Wars Clone Trooper BARC Speeder, as usual, previous MOC design post records had been folded at the end of this post. Since last MOC built of my BARC speeder, almost 1 year pass. Recently TCW S07 is on show and LEGO announced 75280 BARC and AT-RT battle pack as well. All these delightful things encourage me to finalize my BACR speeder MOC evolution tangle. Some time I just stared at the 3D model for quite a while, couldn’t figure out what’s myself prefer... During my MOC polish, there’s very good inspiration from Flickr ID Luca (a.k.a Luca s projects) BARC-speeder with sidecar (https://flic.kr/p/2gDHfAr ) . Especially in our domestic forum, a fan (贴吧用户_5AeVAaG) work out the front engine’s turbo feature within limited space. The key trick of front engine turbo feature, is the MF tool screw driver as below, for sure, per suitable color, 93094 Lipstick is also working fine. Since early of this year my AT-RT MOC evolution, I decide to abandon MF riding position, which need to disassemble MF legs, I knew lots fans feel bad on it, thus, now MF legs print is presentable To ref. the BARC Speeder database (by unusualsuspex, on deviantart), here I built this 15 stud length BARC speeder, if as normally count 3 stud = 1 meter, then just fit the MF scale :) Benefit from the radii of 26047 part, the sidecar is rotatable to display the scene from TCW S04E11. To duplicate myself BARC and AT-RT battle pack, here I combine it with my AT-RT MOC, and a fun of “fake news” leaking box is coming :p Also plus one more couple of BARC and AT-RT, it upgrades toward an “Kiros battle pack PLUS”, LOL With color scheme modified, easy to gain an EP3 91 Recon Corps BARC version. May.30 2019 updated Oct. 2018 modification Sept. 2018 first try -
Hello everyone, as promised here are my AAT and DDT MOCs. AAT - Armored Assault Tank While LEGOs Clone Wars AAT is actually very close to minifig scale, many of the proportions just aren't quite right. I changed the front sections shape a fair bit, as the actual tank isn't quite so round. It sort of flattens out in the middle, I also added the scoop in the front. In cross-section images it shows that the front domed peace is actually also a hatch, so I added that functionality since it was already on a hinge. There is enough room in the turret for a full droid, even with the hatch closed, you just need to fold the head down. The rear hatch can also open, revealing the droid crew, 1 driver and 2 gunners. Also did a palette swap for the AAT Lok Durd rides around in. DDT - Defoliator Deployment Tank The DDT design-wise isn't too different from the AAT. Shaping the stabilizers wasn't the easiest, but I think they came out alright. The turret itself wasn't too difficult to design, but oddly enough getting the grated platform along the side proved rather annoying. I had to leave it for a while and come at it with different perspective. As always, hope you enjoy. -
Hey everyone, hope everyone has been doing well. I've been busy working away at expanding my minifig scale MOC collection (Still only digitally atm). And thought I'd bring you something that I haven't really seen around anywhere. A minifig scale Hyena-class Bomber. This one was pretty tricky, but I think it came together rather well in the end. The official LEGO Hyena bomber was alright, but left a lot to be desired. The overall shaping of the ship was kind of off and the walking mode looked nothing like the source material. My goal was to get mine as close as I could and keep it in line with my other minifig scale builds. This was a little harder than I had anticipated, and I had to make one sacrifice right off the bat. There was no way that I could get the legs to physically retract the way they do on the actual ship, even more so at this scale. So unfortunately there is a small bit of "parts-forming" required between modes, but I made it as little as possible. I was able to get the wing mounts to extend out of the main body to allow upper leg movement though. The other thing that always made the model look wrong was using the head build method established by LEGO. While the stickers used to make up the "face" look nice, the overall head shape is left extremely flat. It took a week or so of playing with parts, but I was finally able to come up with a brick-built head design I was happy with. While it may not be perfect, for the most part has the general shaping of the actual Hyena bomber. I then utilized variations of the technique to build the other head-like shapes on the ship, including the targeting head below. I've also included a couple photos with some of my other MOCs for size comparison. Prior to working on the Hyena bomber, I had built a minifig scale Vulture droid, but was unhappy with the stock LEGO style head. However after figuring out the head for the Hyena bomber it wasn't too hard to down-scale to get a suitable head for it too. So since they are fairly similar I'm including the pictures of it here as well. Both ships were designed to use The Clone Wars colour schemes, although it could be debated that they Hyena should be sand blue rather than DBG, but given that practically none of the pieces come in that colour, there wasn't much choice. There are scenes from the show where it does look more grey that blue anyways. As always, hope you enjoy! I'll be back soon with my minifig scale ATT and DDT.
-
There's MOC for an ChinaLUG activity, and would like to share here for your fun. This's a story beyond the Clone Wars, 17 BBY, 2 years after Order 66 executed. On the system Saleucami, both Driods and Clones were gone, space-lines were destroyed, and only wasteland remained. Over view of 32x32 base scene. The main creatures play in Cut Lawquane, early stage well trained clone trooper, may participated 22BBY 1st Geonosis battle, quit and founded family with TwiLek Suu Lawquane. Forced growing procedure makes him aged fast. (I once thought about using typical clone head of animation version, but face-silkscreen style may not consist with other MFs, so changed Fett's, since they are from the same DNA) Shyyya Lawquane, Twilek, Suu's daughter; Kath, (above pic, right MF) my original character in this MOC, Togruta female from Kiros, escaped from Zygerrian's slavery and joined Cut's surviving hunting. Katooni, youngling, I imaged she was assigned to Jedi Stass Allie as Padawan, took non-millitary ship to Saleucami and just luckily missed Order 66, then survived... Acklay, a surprisingly agile fury of sharp claws and pointed fangs, the vicious acklay was one of the three arena creatures unleashed in the Geonosian execution arena. Background and base. since TCW S02E09-S02E10, the war reached here and Droids army may deployed defoliator capsule weapon (below pic left-upper zone). 19BBY Order 66 took down both Separatists and Republic, Jedi Stass Allie was eliminated and her 91 Recon corps turned back to hunt for Jedi, this outer rim system was abandoned. Above pic showed a wreckage of Stass Allie speeder bike.
