Kozikyo86
-
Posts
451 -
Joined
-
Last visited
About Kozikyo86
- Birthday 12/16/1986
-
That's just how it is! :) Thanks everyone for the kind comments, I'm glad you like MOC! I think I'll be converting this ISD into Thrawn's version early next year. I just need to buy a torch of gold bricks... another photo from a slightly different perspective:
-
I haven't been here for a while, but I spent many months building... IMPERIAL STAR DESTROYER Construction on this project began in 2020... but I abandoned it after a few weeks. The right parts didn't exist, I built it in LDD and ran into some difficulties myself. After more than five years, I restarted the file and reattached the first bricks in November 2025... There's a lot to discuss, so I encourage you to watch the video. Below are the key details: - 5910 parts - 69.4 cm long - It's still a playset! But UCS quality - It has an interior and minifigures - It's heavy, but you can lift it without a problem - A sturdy shelf will come in handy ;) - It can hold 10 minifigures, or more if you like - I built it for 7 months - The parts cost around 600 EUR, but maybe less if you order from PaB - I use red and yellow bricks in the instructions - it's any color. - I use stickers from the set 75394 (bricklink number 75394stk01) My ISD has a full interior including Command Bridge: The instructions are available! There are two ways to get one: rebrickable (link below) or directly from me (a bit cheaper). https://reb.li/m/269239 You will find all the details and answers in the video below:
-
New update: GRAND TITAN fifth remaster is ready! I'm slowly approaching the end, with only Thunder Fury left. I might make other mechs and a main moc next year, we'll see.
-
New update: FIRE VULTURE fourth remaster is ready! More details on my video:
-
[MOC] Forestmen's River Fortress | Remaster
Kozikyo86 replied to Kozikyo86's topic in LEGO Historic Themes
@jimmynick "studs bare on the ground floor to resemble rough stones." I actually treat it as a place to attach minifigs, I didn't look at it that way @DonQuixote In this case I didn't want to build up the back, so I made a completely open version for playing. Flooding wouldn't have happened because the real tower would have had a wall. Unless a wall leaked, then the prisoner would have been out of luck :) The more I look at those 1x4 parts, the more I think you're right. I think I'll replace them. -
Hello everyone! After 6 weeks of intense construction, my new project is finally ready. Foresmen's River Fortress I'd had the idea for a Forestmen project in my head for a while. Ever since I got my hands on GWP 40567, in fact. After a while, I had a small army of Forestmen, and it was only a matter of time before they got their own MOC. Initially, I planned to build my own version, but then I thought a remaster of a set would be much more interesting. I didn't hesitate for long and chose River Fortress, as this set offered the greatest potential for expansion. You can find all the details, techniques and construction stages in the video below:
-
Next mech is ready and this fime for something bigger... STEALTH HUNTER All details here:
-
Today it's time for first Robots mech: SENTRY All details and more intresting facts on my youtube movie:
-
Hello everyone! Today I'm starting preparations for a larger Exo Force project, celebrating the series' 20th anniversary next year! Wow, it's been so long! The project will be built in several stages. The first stage will be the construction of my version of the mechs from the first wave. Next year I will start building the base and the bridge. but let's get back to the mechs, first a small unit... UPLINK This little mech was built by Ryo, who is one of the mechanics of the Exo-Force Team. He is also a designer and inventor of many of the human battle machines - like Mobile Defense Tank set 7706 Uplink is a set number 7708 released in 2006, it contains only 69 parts. More information about this project in the video below, where I talk much more. And how do you like the idea for such a series The Sentry will be next!
-
This time I made it to the premiere! I present to you: TIE Avenger from the second season of Andor series! Some details: Minifig scale Playscale durability 1088 parts including display stand Opening cockpit at front, top and back Very many details You can fly around the room! The project was built based on the trailer, where all the details were shown. In the episodes it turned out that the ship has space for 2 passengers. In my project I made an interior in the back that will fit one minifigure. The construction of the ship does not allow for enlarging this space (main technic frame) It is possible to modify the gun from the bottom and add a green shooting effect. You can also add two side miniguns, just like in the series. I showed it in the video below. The instructions are available here: https://reb.li/m/218845 If you want it cheaper, write to me directly by email.
-
Hi, today I wanted to take you on a nostalgic journey to Lego Atlantis and my new MOC: Gateway of the Squid Did you know that this series is already 15 years old? Do you feel old? On this occasion I decided to build one of my favorite sets from this series! all the details and the whole story about the series can be found in my film, link below! Did you have any sets? How do you remember Lego Atlantis?
-
My new little Castle MOC is ready! Wolfpack Renegades Remaster of set 6038 from 1992! - all features as in the original set! - 182 parts! - available instructions: https://reb.li/m/212030 What's more, I've prepared a video where I discuss the Wolfpack series, its history and all the details. You'll also find all the details of my carriage! And what do you think? Who had the original set as a child? :)
-
Hi! Today I present to you my Nether project! I had been collecting the necessary parts for almost a year before, mostly in dark red. Then I thought I would need a lot of lava. With each purchase I added a little trans orange and so I collected a lot of parts. The construction started some time ago with Warped Forest This was the first project where I used so many LEDs, there are 50 in lava! Satisfied with the effect, I decided that this was just the beginning and I would build more parts. Yesterday I got another MOC - this time it was Nether Bastion, which was very difficult to build. And it required about 3000 black bricks or more on the right side soulsand appeared, so the next project will be Soul Sand Valley :) How do you like it? more about these projects in the videos below:
-
Hi!time for a new project!T-6 Jedi ShuttleI finally built it, better late than never, right? :) My MOC is playset scale, but much larger than the official 75362 set. It also has 3 times more parts!I'm using 1864 parts here, including one sticker sheet from 75362. The instructions also include Landing Gears and a Display StandMy project can be flown around the room, but it must be lifted properly, lifting it by the wing itself is not recommended.In the video I use lights that I received from LeLightGo. Details in the video description.
-
Hi!I'm back with a new Star Wars project! POE DAMERON'S T-70 X-Wing Fighter This time something from the sequels! It's been almost 10 years since the premiere of The Force Awakens! Do you feel old? Just before the premiere of the film I bought the 75102 set and that's how my adventure began, first modifications and then my first own projects.My 75102 has been lying in the closet for many years, until now! This is one of my favorite Star Wars designs, I really like the combination of black and orange. I decided to return to the topic and create my own T-70 MOC The basis for the front was the design by Quarries Workshop, who did a great job on this element, check out his other designs! In the later stages of construction I will develop this structure for my own needs. The biggest challenge was building the wings, because the T-70 has a completely different design than the classic T-65. 971 parts! If you have the 75102 set you can use 188 parts. Instructions is available here:https://rebrickable.com/mocs/MOC-199921/EDGE OF BRICKS/poe-damerons-t-70-xwing-fighter/#details All details on video: