ukbajadave

Congrats on choosing such an interesting inspiration and not going for a traditional supercar. This seems like a truly tiny build, to my eye it seems about 11 studs wide and under 30 long? I think the smaller you go the harder it is. I think the front captures the look of the RCZ and the panels used for the doors are very nicely done. The back is where I'd be working. Have you considered moving the front mounting point of the White Curved Panels up one stud? That way the slope of the rear screen could continue. Also it might allow you to mount the rear lights horizontally instead of vertically a bit closer to the prototype.

Thats a fast looking car! I didn't realise those wheelarches came in red. From the side it reminds me of a retro hatch like an AE86 or even a Isuzu Piazza which was AWD. Of course if that's a transverse V10 your car must be a Volvo Is the steering angle the same both ends? It might be cool to use different ratios front and rear as most 4WS systems have only a few degrees on the rear.

I should add WIP to the thread title as I thought I was nearly done but now it's back in pieces! I've raised the steering arms level including the 1/2 offset due to the way I built the hubs. Now the holes in the steering rack are vertical rather than horizontal. I don't want to go HOG so how can I connect the steering wheel (yellow axle) to the rack (blue beam)? Ideally without friction. Any suggestions gratefully received There was a mini competition? I must've missed that

Being a technic kind of guy I threw this together to see it for myself. It's absolutely crazy once you get it balanced you can gently tap down on the top of the long chains and they spring back up! The tyre is needed as the top arm needs to be heavy on the back edge. I made a bricklink wanted list for the JK Brickworks Tensegrity sculpture so I can build one to display.

Lots of very nice details here, I especially like the way you've recreated the headlight details under the clear panels. I wouldn't bother adding a spoiler. When I imagine a Gallardo I picture the flat rear deck and square rear edges. A quick look at autotrader suggests only 20% have wings. I'm looking forward to seeing some more pics as I'd love to see how you've got the front wheels so tight in the arches but still steerable. I'm guessing a virtual pivot system?

Thanks @dr_spock and @JGW3000 I've watched the video, read the wikipedia page and it still blows my mind! I think even if I build something myself it will still seem like magic.

Came across this on another non Lego forum. I assume its maybe something to do with balance or maybe its photoshop magic but I just cant figure it out. Can anyone shed some light on the principle? Pic from original thread, not mine. I would ask on the other forum but I'm not registered there, I just browse.

Rear suspension now more accurate to prototype. Proof of concept Built into existing chassis. Yellow axles are wheel position. When I told the wife I'd built suspension like a real mini she said "What? Hard, bumpy and uncomfortable?" She's not a fan

There were some real innovations in the original, enough so that I think a future project might be one of these in a bigger scale. Imagine one with rubber cones, FWD 4 speed gearbox and picnic hampers under the rear seats! Still, comments inspire me to try different approaches so watch this space... Almost anything that's orange came from the 42093 I bought to get contest spec wheels so limited parts I'm afraid. That's why the panels for the boot are Panels with lots of holes instead of much better ones. The entire body was based on what was in the box. We all know white bonnet stripes should really have a white roof too.

@Jim Thank you for organising this. It's incredible to see so many entries including my first I avoided looking too much at the other entries until I had mine sketched out but the creativity shown by everyone is amazing, it's like a masterclass in how to build compact! Like many others I found myself with some unexpected time off and this has given me something constructive to aim for and helped occupy my mind. By keeping the contest simple you encouraged those of us without rooms full of Lego to have a go (actually I have a room for Lego but it has other stuff in it too). Once again thank you.

@Jurss You're right, there is still time and although I'm happy with where I am so far I should push myself a little more I wonder if the solution is as simple as raising the steering rack one stud? At the moment the rack moves in one plane (red line) and the steering links (orange) are angled in relation to the suspension arms (green) If I lift the rack so that the steering arms are blue will everything follow the same arc? The steering and suspension arms are both 5L The original aim was to keep everything on the chassis as low as possible to make room for the engine.

Inspired by a true icon of motoring I present my first ever entry into a Eurobricks competition! Edit: The pics in this post are the first build. Final pics are further down (but don't just scroll down there! Read this post too to see why I changed stuff) Functions include: Independent front and rear suspension. Front steering via steering wheel. No HOG. Opening front doors. Opening bonnet. Folding front seats to access rear. Interior features the classic central dial layout. This is obviously someone's modified example judging by the parcel shelf speakers, extra fog lights and twin exhausts... Total size is within contest guidelines at 14Hx15Wx30L. Although built to the limit of my parts and skills it isn't perfect. I managed to include an opening bonnet but there is simply not enough room for the engine I wanted to add. And because the steering arms are not in line with the suspension arms the toe in changes with the suspensions travel. At rest the weight of the model is sufficient to keep them straight but it does vary a lot! A virtual pivot steering system might have been the solution for both these issues but I would have had to sacrifice the independent front suspension. Ultimately I did what I could with the parts at hand. A couple of snowmobile steering arms would've been very handy though. Finally whilst the roof was off for interior pics I took the opportunity to mock up this little speedster Thanks for looking, as always comments and suggestions welcomed.

Really enjoying the evolution of this MOC I think the twin stripes look more like a design choice now unlike the single which looked like you'd run out of beams. The increased wheelbase balances the model better and the grille and hood are much cleaner. Well done on getting rid of that single DBG element in the exhausts too. Regarding the prospect of a long low trailer have you considered studded beams for the frame? I find they tend to be stiffer than studless for the same distance. I'm looking forward to seeing what you come up with. (Of course, once you have a trailer you'll have to build something to put on it, it never ends )

What a fantastic C model! The use of the blue wheel arches for the tail rotor is very clever and the 2L connectors used for the MAN body panel are spot on compared to the real thing. It seems like this set is becoming more and more wanted as people look beyond the original and explore the possibilities.

Does the output need to change direction?

Is the OP's question "Can you have enough Lego?" or "Can you have enough of Lego?" My answers are no and yes in that order. "No" because I mostly MOC so the more bricks I have the greater the variety I can build. Right now a couple of 15460 in my collection would make TC18 so much easier! "Yes" because I mostly build as a way to relax and unwind. If some complicated Technic thing just isn't working I think I've had enough of Lego and go do something else

What about the driving axle turning clutch gear with a half beam fixed to the central axle cross and an idler gear on the other end of the half beam which meshes with two different gearboxes (high/low) When the driving axle is turned the clutch turns one way or the other until the idler gear engages, then it slips until release?

Does the answer lie in a sliding worm gear? I'm not near my parts so I can't be any more help but I'll be following this thread as it sounds like an interesting idea.

I was avoiding reading anything with a TC18 tag until I had the basics of my entry but having also watched the Netflix show I had to click when I saw the choice of car! Its instantly recognisable if you have seen the original, especially with the rear detail and bonnet scoop. I also like the way the grey half beams look like the instruments. Regarding the headlights how does it look with 1x1 studs? I think too small might be better than too large as there is grille all around the lights on the prototype.

The white flex axles and the way the rear of the car extends from the wheel arch make me think of 1970s endurance racers. Lose the rear diffuser and move the rear wing level with the rear deck for that aerodynamic look

As of this morning I find myself with several weeks of unexpected building time so I have ordered 42093 and if it turns up I am going to enter my first Eurobricks contest Yay! Whilst I appreciate the absence of prizes and will be entering purely for fun with no intention of winning is there a chance there may be badges? My profile looks a little barren for someone who has been here for 10 years.

Looks good from what I can see, get yourself a bricksafe account and post some more pics! I'd particularly like to see the range of movement you get from the small LA on the second boom and how the whole thing folds so compactly. Trucks with generators on the back always make me think of travelling funfairs, have you got the pieces (and time, space and inclination) to make some kind of ride? Making something that works and can also be folded for transport could be a really absorbing build.

Good looking MOC. I like the idea that limiting your parts leads to creative solutions. For example every truck I make ends up with 42043 mirrors whereas you found a different way. How much did you plan before starting to build? It looks very organised and economical with part usage whereas I often end up using 4 parts where 1 might do because I don't plan ahead. Regarding the panels I assumed they were an aesthetic choice representing a grey stripe echoed in the fuel tanks and across the roof The only suggestion I would make is if you have an opening hood make the most of it and add an engine!

It looks like a fun little RC build I see a P60 Toyota Starlet.

Instantly recognisable shape, I thought this was a City build to begin with. Nice work getting functions in such a compact build. Is the rear suspension same principle as the front? Rear mounted spare wheel perhaps?